S E L E C T I O N
G U I D E
page 19
MODEL
H5BR
H5CR
Multi-mode
Multi-mode
Dimensions
72 H x 72 W x 100 D mm
(2.83 x 2.83 x 3.94 in)
48 H x 48 W 84 D mm
(1.89 x 1.89 x 3.31 in)
Description
Easy-to-use DIN size timers offer 9
timing modes, a batch counting
function to keep track of completed
cycles and both contact and solid
state outputs. Four level key
protection provided.
Compact 1/16 DIN timers with
easy-to-read LCD and backlit
displays allow flexible timing with
outstanding repeatability. 9 control
modes and four levels of key
protection provided.
Time
limit
One SPDT, 5 A, 250 VAC and
NPN open collector transistor, 10
to 100 mA, 30 VDC NPN transistor
batch output
—
SPDT relay, 5 A, 250 VAC or NPN
open collector, 5 to 100 mA, 30
VDC
9 selectable modes including
ON-delay, repeat cycle, OFF-delay,
one-shot, interval, cumulative
signal ON-delay, batch function
9 selectable modes including ONdelay, repeat cycle, OFF-delay,
one-shot, interval, cumulative
signal ON-delay
0.001 second to 9999 hours
0.001 second to 999 hours
Display/indication
4-digit LCD alphanumeric display
with backlighting
4-digit LCD alphanumeric display
with or without backlighting
Resetting type
Self-resetting and external resetting depending on mode
Self-resetting and external
resetting depending on mode
Resetting time
0.5 second
0.5 second
Supply voltage
100 to 240 VAC, 50/60 Hz
24 VAC/12 to 24 VDC
24 or 100 to 240 VAC, 50/60 Hz
12 to 24 VDC
Panel
Panel, track, surface
Protective covers
Sockets for H5CR-L, protective
covers, DIN rail
UL, CSA, SEV, CE (EMC)
UL, CSA, SEV, CE (EMC)
Type
Control
outputs
Instantaneous
Operation modes
Ranges
Mounting
Accessories
Approvals
2
page 33
—
S E L E C T I O N
G U I D E
page 63
page 49
page 73
H3CR
H3CR-F
H3CR-H
ON-delay and Interval/Multi-mode
Repeat cycle
Power OFF-delay
48 H x 48 W x 68 D mm
(1.89 x 1.89 x 2.68 in)
48 H x 48 W x 66 D mm
(1.89 x 1.89 x 2.62 in)
48 H x 48 W x 78 D mm
(1.89 x 1.89 x 3.07 in)
Analog set, 1/16 DIN sized solid-state
timer offers space-saving short
mounting depth and a wide range of
panel covers to match control panel
design. Rotary switches select 16
time ranges, instantaneous output
and operation mode. Plugs into
standard 8-pin or 11-pin sockets.
Analog set, solid-state timer offers
combinations of independent long
ON/OFF time settings in a compact
1/16 DIN unit. Users can select
repeat cycle models with either ON
start or OFF start operating functions. Plugs into standard 8-pin or
11-pin sockets.
Analog set, solid-state timer with
extended Power-OFF delay timer,
up to 12 seconds, for S-type and
12 minutes for M-type models.
Plugs into standard 8-pin or 11-pin
sockets.
DPDT, 5 A, 250 VAC Transistor, 100
mA, 30 VDC (NPN/PNP)
DPDT, 5 A, 250 VAC
DPDT or SPDT, 5 A, 250 VAC
DPDT, 5 A, 250 VAC Transistor, 100
mA, 30 VDC (NPN/PNP)
DPDT, 5 A, 250 VAC
DPDT or SPDT, 5 A, 250 VAC
ON-delay and Interval or selectable
ON-delay, repeat cycle (two types),
signal ON/OFF delay, signal OFF
delay, interval
Repeat cycle, ON start or OFF start
Power OFF-delay
0.12 second to 3,000 hours
(16 field-selectable ranges)
0.05 second to 30 hours, 1.2 second to
300 hours (14 field-selectable ranges)
0.05 second to 12 minutes
Power ON, Output ON LEDs
Power ON and Power OFF LEDs
Output ON LED
Power OFF; external and self
resetting
Time limit reset or self reset
Instantaneous operation, time-limit
reset, forced reset (depending on
model)
0.1 second max.
0.1 second max.
50 ms min.
100 to 240 VAC, 50/60 Hz
12 VDC
24 VAC/VDC
100 to 240 VAC, 50/60 Hz
12 VDC
24 VAC/VDC
100/120, 200/240 VAC
48 VDC
24 VAC/VDC
Panel, track, surface
Panel, track or surface
Panel, track or surface
Sockets, panel covers in three colors,
time setting ring, protective covers,
adapters for panel mounting, DIN rail
Sockets, time setting ring, protective
covers, panel covers, adapters for
panel mounting, DIN rail
Sockets, time setting ring, protective covers, panel covers, adapters
for panel mounting, DIN rail
UL, CSA, SEV, CE (EMC) (LV)
UL, CSA, CE (EMC) (LV)
UL, CSA, CE (EMC) (LV)
3
S E L E C T I O N
G U I D E
page 85
MODEL
H3CA
H3DR-A
ON-delay/Multi-mode
Multi-mode
Dimensions
48 H x 48 W x 63.7 D mm
(1.89 x 1.89 x 2.51 in)
75 H x 22.5 W x 100 D mm
(2.95 x 0.89 x 3.94 in)
Description
Digital set, solid-state timer with wide 0.1
sec to 9990 hour range in a compact, 1/
16 DIN plug-in unit. Easy-to-read LCD
time remaining bar graph and output
status indicators. Many control modes to
match most applications. Thumbwheel
switch selects time unit, control mode,
and time limit setting. Wide supply
voltage range.
Space-saving, analog set timer offers
6 field-selectable operating modes
and external gate, start and reset
inputs. All controls are on the front
panel. Improve time setting accuracy
by using the fine-tuning knob. Built-in
DIN rail clamp for easy trackmounting. Write-on nameplate
simplifies timer identification.
DPDT or SPDT, 3 A, 250 VAC
DPDT, 5 A, 250 VAC (H3DR-A)
Transistor, 100 mA, 30 VDC
(H3DR-AS)
—
Type
Control
outputs
Time
limit
Instantaneous
SPDT, 3 A, 250 VAC (H3CA-8H only)
Operation modes
ON-delay only or multi-mode model
with ON-delay, repeat cycle, signal
interval/OFF-delay, 2 types of signal
OFF-delay, interval, cycle, and signal
ON-delay/OFF-delay
ON-delay, Repeat cycle/signal OFF
start, Repeat cycle/signal ON start,
Signal ON/OFF-delay, Signal OFFdelay, Interval
Ranges
0.1 second to 9990 hours (fieldselectable time units from 0.1 second
to 10 hours x 3 digits)
0.12 second to 120 hours
Display/indication
LCD output status and percent time
remaining bar graph
Power and Output ON LEDs
Resetting type
Self resetting and external resetting
(one or both)
Self resetting
Resetting time
0.5 second (8-mode model)
0.1 second (ON-delay model)
0.1 second
Supply voltage
24 to 240 VAC, 50/60 Hz and
12 to 240 VDC (8-mode) 24,
100/110/120, 200/220/240 VAC,
50/60 Hz 12, 24, 48, 110 VDC
100-240 VAC, 50/60 Hz
24 VAC/VDC
12 VDC
Panel, track, surface
Track
Sockets, protective covers, adapters
for panel mounting, DIN rail
DIN rail
UL, CSA, SEV
UL, CSA, CE (EMC) (LV)
Mounting
Accessories
Approvals
4
page 99
S E L E C T I O N
G U I D E
NEW
page 99
page 111
page 123
H3DR-M/H3DR-P
H3RN
H3G
ON-delay/Multi-mode
ON-delay/Interval/Repeat Cycle
ON-delay
75 H x 22.5 W x 100 D mm
(2.95 x 0.89 x 3.94 in)
31.2 H x 12.8 W x 47.4 D mm
(1.23 x 0.5 x 1.87 in)
36 H x 36 W x 60 D mm
(1.42 x 1.42 x 2.36 in)
Slim analog set timers offer fieldselectable ranges and multiple
operation modes (H3DR-P) or
economical ON-delay only with
application-specific timing ranges
(H3DR-M). Built-in DIN rail clamp for
easy track mounting. Write-on
nameplate simplifies timer
identification.
Ultra-slim analog solid-state time
delay relay. Choose multiple time
ranges and operating modes from
dip switch settings.
Low-cost solid-state time-delay
relay with large switching capacity
plugs into standard 8-pin sockets.
Choose from 12 time ranges.
SPDT, 5 A, 250 VAC
SPDT, 3 A, 250 VAC
DPST-NO, 3 A, 250 VAC
SPDT, 7 A, 125/250 VAC
DPDT, 5 A, 125/250 VAC
—
—
—
ON-delay only (H3DR-M) ON-delay,
Repeat cycle/signal OFF start,
Repeat cycle/signal ON start, Signal
ON/OFF-delay, Signal OFF-delay,
Interval (H3DR-P)
ON-delay/Interval/Repeat Cycle
ON-delay
0.12 sec to 120 hours (H3DR-P) 0.1-1
sec, 0.2 to 5 sec, 0.5 to 10 sec, 1 to 30
sec, 2 to 60 sec, 0.5 to 10 min (H3DR-M)
0.15 to 10 minutes or 0.1 minute
to 10 hours
0.1 second to 3 hours
(12 ranges)
Power and Output ON LEDs (H3DR-P)
Power LED (H3DR-M)
Power ON LED
Output ON LED
Power ON LED
Self resetting
Self resetting
Self resetting
0.1 second
0.1 second max. 12-24 VDC
0.5 second max. 24 VAC
0.1 second max.
(H3DR-P)100-120 or 200-240 VAC,
50/60 Hz 110-120 or 220-240 VAC,
50/60 Hz (H3DR-M) 24 VAC/VDC
24 VAC
12, 24 VDC
100/110/120,
200/220/240 VAC,
50/60 Hz
Trac
Socket
Panel, surface
DIN rail
Sockets
Panel mounting adapter, sockets
UL, CSA, CE (EMC) (LV)
UL, CSA, CE (EMC) (LV)
UL, CSA
5
S E L E C T I O N
G U I D E
NEW
page 129
MODEL
H3YN
H5AN
ON-delay/Interval/Repeat Cycle
Multi-mode
Dimensions
28 H x 21.5 W x 56.6 D mm
(1.10 x 0.85 x 2.23 in)
72 H x 72 W x 102 D mm
(2.84 x 2.84 x 4.02 in)
Description
Subminiature analog solid-state
time delay relay. Choose multiple
time ranges and operating modes
from dip switch settings. Sockets
provide for track solder terminal or
wire-wrap terminal mounting.
Wide range timer with large LED
display offers 7 selectable operating
modes. Both contact and solid-state
open collector outputs are available
simultaneously. Built-in 12 VDC
power supply for external sensors.
Convenient draw-out construction.
Ranges are DIP switch selectable.
Memory protection circuit available.
DPDT, 5 A, 250 VAC
4PDT, 3 A, 250 VAC
SPDT, 3 A, 250 VAC
SSR, 100 mA, 30 VDC max.
—
—
Operation modes
ON-delay/Interval/Repeat Cycle
Elapsed time, time remaining, time
overflow, one-shot, delayed
one-shot
Ranges
0.15 to 10 minutes or 0.1 minute
to 10 hours
0.01 second to 9999 hours
(in 8 field-selectable ranges)
Power ON LED
Time UP LED
4 LED digits, time up
LED indicator
Resetting type
Self resetting
Power-OFF, external,
manual, automatic
Resetting time
0.1 second max.
0.5 second (power-OFF)
0.02 second (external)
Supply voltage
24, 100/120, 200/230 VAC
50/60 Hz
12, 24 VDC
24 or 100 to 240 VAC, 50/60 Hz
12 to 24, 48, 100 VDC
Socket
Panel
Accessories
Sockets, hold down clips
—
Approvals
UL, CSA, CE (EMC) (LV)
UL, CSA, SEV
Type
Control
outputs
Time
limit
Instantaneous
Display/indication
Mounting
6
page 143
S E L E C T I O N
G U I D E
page 161
page 153
page 177
H5CL
H5CN
H5F
ON-delay and Cumulative
ON-delay
Daily timer
48 H x 48 W x 64 D mm
(1.89 x 1.89 x 2.52 in)
48 H x 48 W x 72.5 D mm
(1.89 x 1.89 x 2.85 in)
48 H x 48 W x 75.5 D mm
(1.89 x 1.89 x 2.97 in)
1/16 DIN timer with NEMA 4
protection withstands washdowns
and dusty environments. Use the
increment and decrement keys for
quick, easy settings. Available
terminal forms with 11-pin sockets
or terminal strips.
Compact plug-in timer with large
LED display has selectable indication for elapsed time or time
remaining. Choose contact or solidstate open collector output Memory
protection circuit available. Fits 1/16
DIN panel cut out, plugs into
standard 8-pin and 11-pin sockets.
Daily timer provides precise
control of both regular and special
ON/OFF times. ON/OFF, pulse
and multiple operations available.
Flush or track mount models
available with 5-year battery for
memory protection. Fits 1/16 DIN
panel cut outs.
SPDT, 3 A, 250 VAC
Transistor, 100 mA, 30 VDC max.
SPDT, 3 A, 250 VAC
SSR, 100 mA, 30 VDC max.
SPST, 15 A, 250 VAC
—
—
—
Signal ON-delay and cumulative
Elapsed time, time remaining
ON/OFF, pulse
0.01 second to 9999 hours
(in 8 field-selectable ranges)
0.001 to 9.999 sec, 0.01 to 99.99 sec,
0.1 to 999.9 sec, 1 sec to 99 min. 59
sec, 1 minute to 99 hours 59 minutes
1 day
4 LED selectable digits; up
(increment) and down (decrement)
4 digit LED,
time up LED indicator
LCD: time, day, output status,
program step
Signal ON-delay, external, manual
Power-OFF, external
Programmed or manual
0.5 second min.
0.5 second (power-OFF)
0.02 second (external)
—
100 to 240 VAC, 50/60 Hz
12 to 24 VDC
24 or 100 to 240 VAC, 50/60 Hz
12 to 48 VDC
100 to 240 VAC, 50/60 Hz
Panel, track, surface
Panel, track, surface
Panel, surface, track
Sockets (for AC models only),
protective covers, DIN rail
Sockets, protective cover, DIN rail
Protective cover, wire cover,
sockets, panel adapter, DIN rail
UL, CSA, CE (EMC)
UL, CSA, SEV
UL, CSA
7
S E L E C T I O N
G U I D E
page185
MODEL
H5L
H5S
Weekly timer
Weekly timer
Dimensions
96 H x 96 W x 56.5 D mm
(3.78 x 3.78 x 2.22 in)
72 H x 72 W x 49 D mm
(2.83 x 2.83 x 1.93 in)
Description
Solid-state weekly timer with large
LCD display controls two independent 15-amp circuits. Manual
override of outputs. Simple
prompted programming. Cycle
program repeats ON/OFF sequence over specified time period.
Fits 1/4 DIN panel cut out. 10-year
backup battery protects memory.
Weekly timer has AM/PM display,
24 program steps, and quartz
accuracy. ON/OFF, cycle, and
pulse operations available. Backup
battery protects memory for 5
years. LCD display shows output
status and current or next program
step.
15 A, 125 VAC
SPST x 2, 15 A, 250 VAC
—
—
Repeat cycle, individual program
for each circuit
ON/OFF, repeat cycle, pulse
Type
Control
outputs
page 197
Time
limit
Instantaneous
Operation modes
Ranges
1 week
1 minute to 23 hours 59 minutes
Display/indication
LCD; day, time, program,
circuit status
Resetting type
LCD: time, day, output status,
program step
Programmed or manual
Programmed or manual
Resetting time
—
—
Supply voltage
100 to 240 VAC, 50/60 Hz
100 to 240 VAC, 50/60 Hz
Mounting
Panel, surface, track
Panel, track, surface
Accessories
Approvals
8
Protective cover, DIN rail
Protective cover, track adapter,
DIN rail
UL, CSA, SEV
UL, CSA
S E L E C T I O N
G U I D E
UP
6s
H2C
page 211
H2C
Motor timer
48 H x 48 W x 63.7 D mm
(1.89 x 1.89 x 2.51 in)
Compact motor timer offers 5
selectable sub-ranges for precise
time limit control. Provides ONdelay and OFF-delay timing. Fits a
standard 1/16 DIN panel cut out.
Choose self-resetting or external
power resetting models.
SPDT, 3 A, 250 VAC
SPDT, 3 A, 250 VAC
ON-delay, OFF-delay
1.25 second to 30 hours
0.2 second to 6 hours
0.5 second to 12 hours
(5 field-selectable ranges)
Timing indicator
Self-resetting and electric resetting
0.5 second max.
120 or 240 VAC, 50/60 Hz
Panel, track, surface
Panel adapter, sockets, hold down
clips, protective covers, time
setting ring, DIN rail
UL, CSA, SEV, CE (EMC)
9