steposol® met-10u

STEPOSOL
STEPOSOL®
® MET
MET--10U
GREEN
CHEMISTRY
Surfactant Solution to Solvent ReplacementTM.
Replace NMP, Methylene Chloride, and Glycol Ethers.
Stepan is in the Green Chemistry Business!
A D VA N TA G E S
NON–REPORTABLE VOC, LVP-VOC
REPLACE UP TO 95% OF SOLVENTS
STEPOSOL® MET-10U provides superior cleaning performance while also having an
improved environmental profile due to a low vapor pressure, high boiling point, high NATURALLY–DERIVED, BCI = 75%
flash point, and Biorenewable Carbon Index (BCI) of 75% compared to other solvents.
STEPOSOL® MET-10U IS A NON-REPORTABLE VOC*
United States
State:
According to California Air Resources Board (CARB) Regulation for Reducing
Emissions from Consumer Products, STEPOSOL® MET-10U is a low vapor
pressure VOC (LVP-VOC). It contains at least one carbon atom, has a vapor
pressure below 0.1 mmHg at 20 °C, and a boiling point above 216 °C. Therefore,
STEPOSOL® MET-10U is exempt and the VOC limits do not apply. The reportable
VOC is zero!
STEPOSOL® MET-10U LVP-VOC exemption also applies to those states in the
Northeast and Mid-Atlantic regions under the Ozone Transport Commission Model
Rule for Consumer Products.
Federal:
STEPOSOL® MET-10U is exempt from VOC limit requirements since the U.S.
EPA’s Clean Air Act VOC Standards exempt LVP-VOC from VOC limit
requirements.
STEPOSOL® MET-10U does not meet the VOC definition since it is an organic
compound and does not have a vapor pressure above 0.01 kPa at 293.15 K or has
a corresponding volatility under the particular conditions of use (EC Directive
1999/13/EC).
Canada
STEPOSOL® MET-10U does not meet the VOC definition for consumer products
since it has a vapor pressure below 0.1 mmHg at 20 °C (Environment Canada
Guidelines for VOCs in Consumer Products).
Australia
STEPOSOL® MET-10U does not meet the VOC definition since it is a chemical
compound that has a vapor pressure below 0.01 kPa at 20 °C (National Pollutant
Inventory, NPI definition of Volatile Organic Compounds).
For additional information, please contact Stepan U.S. Technical
Service at [email protected] or (800) 745-7837 and visit
www.stepan.com/STEPOSOLMET.
NON-FLAMMABLE
A P P L I C AT I O N S
HOUSEHOLD CLEANING
INDUSTRIAL CLEANING
METAL CLE ANING
VEHICLE CARE
ADHESIVE REMOVAL/CLEANING
PAINT & COATING REMOVAL/
STRIPPING
PROPERTIES
SOLUBILIZES MANY SOILS
FAST KINETICS FOR CL EANING
Europe
*Based on the U.S., European, Canadian,
and Australian regulations noted above.
READILY BIODEGRADABL E
ENHANCED SOIL REMOVA L
AT NEUTRAL pH
STABLE OVER WIDE pH RANGE
(pH 3-12)
KAURI-BUTANOL VALUE: >1000
pH (5% in 1:1 IPA/H 2 O): 8.0
VAPOR PRESSURE, 20 °C :
0.0025 mmHg
BOILING POINT: 297 °C (566 °F)
FLASH POINT 134 °C (273.2 °F)

Innovative Chemical Solutions for a Cleaner, Healthier, More Energy Efficient World
REDUCE CHEMICAL LEVEL WITH STEPOSOL® MET-10U
STEPOSOL® MET-10U has been shown to replace up to 95% by weight of hazardous solvents without
compromising cleaning performance. When less harmful solvents are emitted into the atmosphere, this
can help reduce negative effects.
STEPOSOL® MET-10U also provides improved performance with up to 200% increase in cleaning
efficiency compared to d-limonene, NMP and glycol ethers in various applications at equal weight.
Please refer to the STEPOSOL® MET-10U Household Cleaning, Adhesive Removal/Cleaning, Paint &
Coatings Removal/Stripping, and Metal Cleaning Application Guides for formulation and performance
details at www.stepan.com/STEPOSOLMET.
STEPOSOL® MET-10U IS DERIVED FROM A
NATURAL, RENEWABLE SOURCE
STEPAN DEFINITION OF NATURALLY-DERIVED: A product derived from biorenewable resource originating from animal, plant or marine feedstock. All Stepan surfactants labeled as naturally-derived have a
minimum of 50% Biorenewable Carbon Index (BCI).
The oleo-based methyl ester backbone of STEPOSOL® MET-10U is currently derived from palm kernel
oil and can be derived from canola oil or soybean oil as well.
STEPOSOL® MET-10U HAS A BIORENEWABLE CARBON INDEX OF 75%
The BCI is a value based on the percent carbon derived from a biorenewable resource. BCI is
calculated by taking the number of biorenewable carbons divided by the total number of carbons in the
idealized molecule, multiplied by 100. For STEPOSOL® MET-10U, 75% of the carbons are derived from
a biorenewable source.
STEPOSOL® MET-10U IS A READILY BIODEGRADABLE SURFACTANT
DEFINITION OF READILY BIODEGRADABLE: According to OECD 301 Test Guidelines for ready biodegradation, a material is considered readily biodegradable if 60% (or 70% depending on the method) of
the organic carbon in the material is converted to CO2 and water in 28 days, within a 10-day window.
The 10-day window begins when 10% of the organic carbon has been converted to CO2.
STEPOSOL® MET-10U has been tested in accordance with OECD 301B, the CO2 evolution test. The
product achieved 61.14% CO2 evolution within the 10-day window and 63.93% biodegradation on day
28 of the test. STEPOSOL® MET-10U is classified as readily biodegradable.
STEPOSOL® MET-10U IS NON-FLAMMABLE
DEFINITION OF FLAMMABLE LIQUID: In accordance with the U.S. Department of Labor Occupational
Safety & Health Administration (OSHA), a flammable liquid has a flashpoint at or below 93 ºC (199 ºF).
Since the flashpoint of STEPOSOL® MET-10U is 134 °C (273.2 °F) using Pensky-Martens Closed Cup,
it is not flammable.
2015 © Stepan Company. All rights reserved.
Disclaimer: Nothing contained herein grants or extends a license, expressed or implied, in connection with patents, issued or pending, of the manufacturer or others. The information
contained herein is based on the manufacturer’s own study and the work of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or
adequacy of the information contained herein. THE MANUFACTURER SHALL NOT BE LIABLE (REGARDLESS OF FAULT) TO THE VENDEE’S EMPLOYEES, OR ANYONE FOR
ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE ACCURACY, COMPLETENESS ADEQUACY OR
FURNISHING OF SUCH INFORMATION.
STEPOSOL® is a registered trademark of Stepan Company.
Version: 1/2015
