Packaging and Shipping
www.vishay.com
Vishay Semiconductors
Packaging and Shipping
DESCRIPTION
The following table lists the number of parts per tube.
Solid state relays are available in plastic dual-in-line
packages (DIP), SOP packages, and in a surface-mount,
gullwing, lead bend configuration. SSRs purchased in the
DIP configuration are shipped in tubes. SSRs purchased in
a gullwing configuration can be shipped in tubes or on
carrier tape. This section provides stick specifications, tape
and reel specifications, and component information.
DEVICES PER TUBE
TUBE SPECIFICATIONS
Figure 1 shows the physical dimensions of transparent,
antistatic, plastic shipping tubes. Figure 2 shows tube safety
agency labeling and orientation information.
PACKAGE
QUANTITY
6 pin DIP
50
6 pin gullwing
50
8 pin DIP
50
8 pin gullwing
50
8 pin SOP
40
4 pin SOP
100
Dimensions in millimeters
528 ± 0.2
330 ± 0.5
260 ± 0.5
200 ± 0.5
150 ± 0.5
125 ± 0.5
– 1.0
30 ± 0.5
VISHAY OPTOSEMICONDUCTOR
MADE IN MALAYSIA
ANTISTATIC
Detail B
B
Detail A
A
– 1.0
– 1.0
3 ± 0.5
– 1.0
380 ± 1
0.7 ± 0.5
13 x 10 = 130
12 ± 0.3
B
6.6 ± 0.3
Transparent rigid PVC
0.
1
2.7 ± 0.2
R
6°
4.4 ± 0.3
1.0 14 x
0.
5
11 ± 0.3
R
0.6 ± 0.1
10°
A
// 0.2 B
Detail A
Detail B
5.7 ± 0.15
17996
Section A - B
Not to scale
Fig. 1 - Shipping Tube Specifications for DIP Packages
Rev. 1.4, 24-Aug-15
Document Number: 83857
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging and Shipping
www.vishay.com
Vishay Semiconductors
Dimensions in inches (millimeters)
0.46 ± 0.01
(11.5 ± 0.25)
0.344 ± 0.01
(8.6 ± 0.25)
Side view
scale: 4X
0.104 ± 0.01
(2.6 ± 0.25)
0.058 ± 0.008
(1.46 ± 0.19)
0.312 ref.
(7.8 ref.)
0.03 ± 0.005
(0.7 ± 0.13)
0.03 ± 0.01
(0.7 ± 0.25)
Top view
not to scale
ANTISTATIC
VISHAY
OPTOSEMICONDUCTOR
4 (100)
22.4 ± 0.04
(558.8 ± 1)
17997
Fig. 2 - Shipping Tube Specifications for SOP Packages
TAPE AND REEL SPECIFICATIONS
REELS
Surface-mounted devices are packaged in embossed tape
and wound onto 13" molded plastic reels for shipment, to
comply with electronics industries association standard
EIA-481, revision A.
• As shown in figure 4, all reels contain standard areas for
the placement of ESD stickers and labels. Each reel also
has a tape slot in its core. The overall reel dimension is
13". Reels contain 1000 6 or 8 pin gullwing parts and
could have up to three inspection lots.
Leaders and Trailers
The carrier tape and cover tape are not spliced. Both tapes
are one single uninterrupted piece from end to end, as
shown in figure 2. Both ends of the tape have empty pockets
meeting these requirements.
• Trailer end (inside hub of reel) is 300 mm minimum
• Leader end (outside of reel) is 500 mm minimum and
560 mm maximum
ESD sticker
Tape slot
in core
330
(13")
• Unfilled leader and trailer pockets are sealed
• Leaders and trailers are taped to tape and hub,
respectively, with masking tape
Regular, special
or bar code label
• All materials are static-dissipative
17999
Fig. 1
COMPONENT SOLDERING
• Wave soldering: 270 °C, 7 s
Top cover tape
CARRIER TAPE
Embossed carrier
Embossment
17998
Fig. 3 - Tape and Reel Shipping Medium
Rev. 1.4, 24-Aug-15
• Surface mount soldering methods, including infrared
reflow:
- Maximum temperature:  250 °C
- Maximum temperature must be reached in  360 s
- Time above solder liquids temperature (183 °C) 
must be reached in  180 s
- Only one excursion above 183 °C allowed
Figures 5 through 9 describe the carrier tape dimensions
and the device orientation.
Document Number: 83857
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging and Shipping
www.vishay.com
Vishay Semiconductors
Pi n 1 and top
of component
0.059 (1.5) min.
0.079 ± 0.002
(2 ± 0.05)
10 pitches cumulative
tolerance on tape
± 0.2 (0.008)
0.157 ± 0.004
(4 ± 0.1)
0.12 (0.3) max.
0.069 ± 0.004
(1.75 ± 0.1)
Top
cover
tape
0.402 (10.21)
0.295 ± 0.002
(7.5 ± 0.05)
0.158 (4.01)
0.362
(9.2)
0.523 (13.3)
0.523 (13.3)
0.472 (12.0)
Embossment
0.004 (0.1) max.
18000
Center lines
of cavity
0.059 (1.5)
Direction of feed
Fig. 4 - Tape and Reel Packaging for 6 Pin Solid State Relays
The tape is 16 mm and is wound on a 33 cm reel. There are 1000 parts per reel. Taped and reeled 6 pin solid state relays conform to EIA-481-2.
Pi n 1 and top
of component
0.059 (1.5) min.
0.079 ± 0.002
(2 ± 0.05)
10 pitches cumulative
tolerance on tape
± 0.2 (0.008)
0.157 ± 0.004
(4 ± 0.1)
0.12 (0.3) max.
Top
cover
tape
0.069 ± 0.004
(1.75 ± 0.1)
0.402 (10.21)
0.295 ± 0.002
(7.5 ± 0.05)
0.167 (4.24)
0.406
(10.3)
0.523 (13.3)
0.523 (13.3)
0.472 (12.0)
0.004 (0.1) max.
18001
Embossment
Center lines
of cavity
0.059 (1.5)
Direction of feed
Fig. 5 - Tape and Reel Packaging for 8 Pin Solid State Relays
The tape is 16 mm and is wound on a 33 cm reel. There are 1000 parts per reel. Taped and reeled 8 pin solid state relays conform to EIA-481-2.
Rev. 1.4, 24-Aug-15
Document Number: 83857
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging and Shipping
www.vishay.com
Vishay Semiconductors
0.157 ± 0.004
(4.00 ± 0.4)
0.372 ± 0.004
(9.47 ± 0.4)
0.012 ± 0.004
0.059 ± 0.003
(1.50 ± 0.6)
0.069 ± 0.004
(1.75 ± 0.1)
0.079 ± 0.002
(2.00 ± 0.1)
(0.30 ± 0.1)
0.263 ± 0.004 (6.68 ± 0.1)
0.108 ± 0.002
(2.75 ± 0.05)
0.630 ± 0.012
(16.00 ± 0.3)
0.251 ± 0.004
(6.38 ± 0.1)
0.295 ± 0.002
(7.50 ± 0.05)
0.104 ± 0.004
(2.65 ± 0.1)
0.059 ± 0.003
(1.50 ± 0.6)
0.361 ± 0.004
(9.17 ± 0.1)
0.472 ± 0.004
(12.0 ± 0.1)
18002
Fig. 1 - Conductive Embossed Carrier Dimensions for 8 Lead PCMCIA Packages
+ 0.3
0.318 - 0.1
(0.0125 ± 0.0012)
2.0 0 ± 0.05
(0.079 ± 0.002)
4.0 0 ± 0.1
(0.157 ± 0.004)
1.50 + 0.1
(0.059 + 0.004)
5.5 0 ± 0.05
+ 0.3
(0.216 ± 0.002) 12.00
- 0.1
+ 0.012
(0.472
)
- 0.004
Typ. 4.30
7.33 ± 0.1
(0.289 ± 0.004)
0.76 (0.030) R
18956
2
1
3
4
1.7 5 ± 0.1
(0.06 9 ± 0.0049)
4°
2.3 6 ± 0.1
(0.09 3 ± 0.004)
2.6 6 ± 0.1
(0.105 ± 0.004)
8°
8.0 0 ± 0.1
(0.315 ± 0.004)
1.50 + 0.25
(0.05 9 + 0.10)
4.7 2 ± 0.1
(0.18 6 ± 0.004)
Fig. 6 - Tape and Reel Packaging for 4 Pin Miniflat Solid State Relays
Rev. 1.4, 24-Aug-15
Document Number: 83857
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging and Shipping
www.vishay.com
Vishay Semiconductors
4.0 ± 0.1
(0.157 ± 0.004)
2.0 ± 0.05
(0.079 ± 0.002)
1.50 + 0.1/- 0.0
(0.059 + 0.004/- 0.0)
1.75 ± 0.1
(0.069 ± 0.004)
Y
5.5 ± 0.05
(0.216 ± 0.002)
2
3
4.72 ± 0.1
(0.186 ± 0.004)
CL
1
4
12.0 + 0.3/- 0.1
(0.472 + 0.012/- 0.004)
X
X
R 0.3
typical
8°
1.50 + 0.25/- 0.0
(0.059 + 0.010/- 0.0)
SECTION Y - Y
7.33 ± 0.1
(0.289 ± 0.004)
12.0 ± 0.1
(0.472 ± 0.004)
2.66 ± 0.1
(0.105 ± 0.004)
4°
Typ. 4.30
0.320 ± 0.03
(0.0125 ± 0.0012)
CL
2.36 ± 0.1
(0.093 ± 0.004)
21598
Section X - X
Fig. 7 - Tape and Reel Packaging 4 Pin Miniflat, 90° Rotation (T2)
Selected 4 pin miniflats are available in tape and reel format with the part rotated by 90°. To order this version, the tape and reel suffix “T” is
augmented by the numerial “2” e.g. LH1546AEFT2. The tape is 12 mm and is wound on a 33 cm reel. There are 2000 parts per reel.
2.0 0 ± 0.10
0.33 0 ± 0.02
(0.079 ± 0.004)
(0.0130 ± 0.0008)
4.0 0 ± 0.1
(0.15 7 ± 0.004)
1.5 0 + 0.1
(0.05 9 + 0.004)
7.50 ± 0.1
(0.29 5 ± 0.004)
1 8
2 7
9.88 ± 0.1
(0.389 ± 0.004)
1.75 ± 0.1
(0.069 ± 0.004)
16.00 ± 0.3
(0.630 ± 0.012)
3 6
4 5
4°
8°
Typ. 3.34
18957
2.6 9 ± 0.1
(0.10 6 ± 0.004)
2.29 ± 0.1
(0.09 0 ± 0.004)
12.0 0 ± 0.1
(0.47 2 ± 0.004)
0.76 (0.030) R
1.50 + 0.25
(0.059 + 0.010)
7.24 ± 0.1
(0.28 5 ± 0.004)
Fig. 8 - 3M Embossed Carrier Tape for Flatpack Solid State Relays
Note
The information in this document provides generic information but for specific information on a product the appropriate product datasheet
should be used.
Rev. 1.4, 24-Aug-15
Document Number: 83857
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000