www.trima.se
Because it works!
Because it works!
”The perfect front loader.
That is Trima”
Hard work always produces unique results.
Farmers and loader manufacturers both
know this. Behind the new Trima Plus loader
range you will discover a great deal of hard
development work derived from a close
dialogue with farmers. Benefiting the user
is our priority. We have therefore focused
on the tractor’s properties and created
new front loader technology with just one
goal in our sights - the whole picture.
Almost everything in the Trima Plus is new,
and everything is well thought-out. The front
loader beam and pins have been increased in
size, giving you greater power during critical
lifting operations. Trima Plus has large working
angles, enabling the implements to be used to
the full. Faster implement changes and faster
connection and disconnection of the loader
are factors that simplify the day-to-day work.
The new Trima Plus delivers quality on every
front, from superb manouverability, to excellent visibility and the simplest tractor servicing possible. The trend is for agriculture to
become more demanding and the tractors ever
larger. As a farmer you are entitled to modern
loader technology that is one step ahead
Does it have an equal?
Simple tractor service
Is there an equally durable system for large tractors, long front loaders, large lifting capacity and really wide
implements? The subframes have all been designed with larger dimensions, and the front loader is now
secured with a locking pin with a 30 % larger diameter. The distance between the load-bearing point and
the pivot point for the loader beam is very short. In addition, the surfaces where the bearing box meets the
subframe have been precision-machined and extended. These improvements guarantee a safe and functional
subframe system between tractor and front loader. Quite simply, you gain access to a sound overall product
that maximises the potential for working with precision, without wear and tear.
Trima’s subframes have a vertical design. Connection
also takes place vertically. The reason is obvious.
Excellent driving properties
Newly developed cross tubes
For better control
With modern tractors it is easy to manoeuvre in difficult terrain. Solutions that do not restrict the front
wheels’ movements are therefore best for the tractor.
Vertical subframes and carefully designed front loader
fixing points provide more space for large wheels and
mudguards. This allows you to get the maximum turning radius.
The curved cross tube is a new design feature that
provides more room for both front weights and front
linkages. The cross tube is also located towards the front
of the front loader. This means that large front loaders
can be installed further back on the tractor, enabling the
weight distribution and stability to be improved. It also
means that the machine as a whole is shorter and the
driving properties more convenient. The forward location
of the cross tube also ensures that it does not obscure
the tractor’s headlights.
From the driver’s seat it is easy to follow the implement’s movements via the new position indicator. It
is short and compact, and has three positions that
can be adapted for different implements according to
individual needs. The low position reduces the risk of
damage to the indicator.
Trima optimises!
+ New subframes
+ Completely new beam design with curved
cross tube
+ No hydraulic pipes and hoses along
the beam sides
+ All pins are reinforced
+ Stronger cylinder designs
+ Perfect visibility from the driver’s seat
+ Newly developed shock absorber - PlusDrive
+ New central valve - Plus Compact Valve
+ New, wide front loader
+ New tool carrier that maximises
visibility when changing implements
2
Modern tractors with versatile service options should
be supported by a functional subframe and locking
system that do not take up unnecessary space.
Free surfaces
The hydraulics are concealed inside the beam. The driver sees only clean surfaces, without pipes and
hoses obscuring his vision. In addition, the front loader and its subframes are the optimum width.
All in all, the new design offers many advantages:
+ Perfect visibility towards the implement
+ More space for service work
+ More space for front linkages
+ Eliminated risk of damage to hydraulic pipes
+ No problems with muck or branches catching on pipes and hoses
3
Because it works!
™
Plus Link . When logic wins through
Trima Plus is a range of front loaders driven by technology. Occasionally, however, the least
complicated solution is and remains the best. For this reason, the most powerful loaders in the
Trima Plus range are fitted with mechanical parallel linkage. This is a logical consequence of
many years’ loader development. Mechanical parallel linkage gives:
+ Approximately 25 % greater lifting force
+ Greater lifting force with smaller cylinders
+ Higher working speed/greater efficiency
+ Greater lifting force far out on the implement
+ More power for handling pallets and straw
+ Better distribution of the load forces
+ Stronger and more torsionally rigid design
+ Maximum utilisation of the tractor’s hydraulics
”Thoughtful.
That is Trima”
All farmers naturally look after their bodies, tractors and products. This is why Trima Plus is
packed full of technology that delivers a combination of performance and safety. Parallel linkage
ensures control over the work, and the optional PlusDrive equipment guarantees comfortable
handling of both the material and the driver. Trima Plus has been developed with consideration
that benefits both your wallet and your job satisfaction and health.
1
By installing two powerful stays over the loader beams, mechanical parallel
linkage and greater lifting force are achieved. This means that the front loader
can reach a greater working speed thanks to smaller, faster lifting cylinders.
This is where the name Plus Link comes from - the front loader’s and the tractor’s potential are increased. In addition, mechanical parallel linkage means that the load forces are
distributed between more points, in turn reducing the total wear on the front loader.
With just one hose and via the new Plus Compact
Valve, PlusDrive is connected to both sides of the
lifting cylinders. This achieves damping in both directions. An extra safety measure - the front loader beam
cannot drop and cause damage, as PlusDrive can only
be switched on if the implement is on the ground.
PlusDrive - extra safe
and comfortable!
Everyone who has invested in a new Trima Plus will
really appreciate PlusDrive, a further improved shock
absorber.
Good damping increases the tractor’s potential, at the
same time as reducing the loads on subframes, tractor subframe, axles, tyres and rims. Above all, however, it protects the driver’s body during hard driving.
+ Protected location inside the powerful, curved
cross tube. Nothing can damage PlusDrive
+ Concealed location provides improved visibility
towards the implement from the driver’s seat
+ All hose connections are protected
+ During grading work, the implement follows the
ground without unnecessary load on the implement
- the results are perfect and there is reduced wear
on the implement
+ Equipped with rotary control for Off and On
+ Extra equipment: electrical connection and disconnection from the cab. The loader can rapidly be
switched from full damping on the ground to no
damping when precision is required for high-level
stacking
2
Here is an explanation of another advantage of using a mechanical parallel
linkage. Note that the lifting cylinder (represented by the counter-weight) is in
the same position as in picture 1, despite the fact that the weight on the forks
has been moved further out. The lifting force required is the same, irrespective of where
on the implement the load is situated. This means that the front loader does not lose lifting
capacity when handling material where the centre of gravity is often far out at the front.
+ PlusDrive delivers careful handling of all loads. No spillage from the bucket and no damage to plastic bales
4
5
3
In order to handle the same load, a front loader without parallel linkage must
be equipped with considerably larger lifting cylinders (represented by the
counter-weight). The loads are concentrated on a smaller number of pins,
and without the mechanical stays the front loader does not have the same strength.
Because it works!
A central new feature
The new Plus Compact Valve symbolises Trima Plus. This is a very logical solution, compared to the multitude
of hydraulic solutions currently available. Instead of building up several valve plates and adding more hoses and
couplings, with an increased risk of pressure loss and leakage, everything is gathered into a single unit - Plus
Compact Valve - which has been designed to withstand the considerable hydraulic pressures and large volumes
of oil found in modern tractors.
The tractor’s hydraulic oil flows directly to the Plus Compact Valve, which distributes the oil at an even pressure
to the relevant lifting and implement cylinders. This means that the same pressure is delivered simultaneously to
both sides of the loader helping it to move smoothly without any ”lopsided” effect.
”Fantastic visibility.
That is Trima”
+ Double shock valves that protect the implement cylinders in both directions
+ Plug In hoses for the 3rd service
+ Pressure-relieving feature for the quick-couplings on the 3rd and 4th services - so that implements
can be connected more easily
+ Prepared for connection of 4th service
+ Prepared for on/off function for hydraulic implement locking
Simpler implement changes with an efficient front loader that offers improved visibility. In the
Trima Plus, professionals now have a work tool that combines strength with technology. A
+ Integrated on/off function for PlusDrive
+ Rotatable hose couplings - for eliminating twisting, e.g. when the implement cylinders are in operation
+ Ozone-resistant hoses for maximum service life
natural continuation of Trima’s tradition of always putting the user’s needs first. The new Plus
Reinforced cross tube
There is naturally a reinforcement plate in the transition
between the curved cross tube and the stable beam
profile. This reduces stress and torsional loading.
Compact Valve, new implement tool carrier, wide front loader models, large working angles
and centrally located quick-couplings for the 3rd service. All go together to provide a surplus
of functionality.
Optimum angle,
irrespective of the task
Changing implements
has never been easier
Large implement angles make it possible to work with
full load and with all possible materials. However, the
design of the implement is also important, so that the
correct filling and dumping angle can be achieved,
whatever the task. When the implement is replaced,
the optimum working angle is automatically achieved.
Incredibly good visibility from the driver’s seat and solid
implement locking are Trima’s signature. Trima Plus’ new
implement tool carrier will not disappoint anyone - on the
contrary, the tool carrier can now be turned all the way
down so that the implement hook can be seen directly
from the driver’s seat. Add to this a broad front loader
beam, which offers good visibility between the front
loader and the front of the tractor - and the end result is
complete control when changing the implement. It has
to be seen to be believed!
Ergonomic connection
Inside the implement tool carrier, behind a protective
plate, is the robust mechanical implement lock. There
is no risk of either handles or locking pins being
damaged in the event of a collision. If the loader is
equipped with the 3rd service, the quick-couplings
have a protected and easily accessible location behind the tool carrier. This means that connecting the
implement is performed from a single position on the
left side and at a comfortable height. Good for the
body, efficient for the work.
6
Overview provides control
Modern tractors are characterised by having hydraulic pipes and hoses concealed beneath bonnets and bodywork. Trima Plus focuses on these same properties. See the similarities! Where are the hydraulic components?
The tractor is designed to give the best possible visibility. The front loader should therefore offer the same.
7
Accidents sometimes happen. In order to avoid damage to the loader beam and cylinders, shock valves are
triggered, for example if the bucket collides with a solid
obstacle. The oil is then re-routed to the other side of
the cylinder and the bucket can move past the obstacle.
Because it works!
”Safe and quick.
That is Trima”
The new Trima Plus front loader range is also based on Trima’s motto: ”the tractor’s
and the driver’s best friend”. When the tractor delivers more strength, Trima Plus
does the same. If farmers want to work faster, our loaders make sure that they can.
Trima Plus focuses on solutions that make operations easier and with less stress.
Perfect control
Cable-controlled ErgoDrive helps the driver to operate
the loader’s lifting and lowering movements, as well as
the implement’s crowding and dumping movements.
These functions can be combined for many tasks,
increasing efficiency. For the best ergonomic working
position, ErgoDrive can be adjusted and positioned in
the cab according to your wishes. It is equipped with two
push-button switches for 3rd and 4th services. Using a
special safety function, the lever can be locked to prevent unwanted front loader movements.
Correctly positioned valve
Once the front loader is connected, you want to get started, not have
to wait and tamper with things. The tractor’s hydraulics are connected
directly to Trima Plus’ hydraulic valve. The position of this valve means
that it does not become soiled by dirt etc.
Also: The valve for ElectroDrive CDC (optional extra) is supplied with
an accumulator in order to ensure trouble-free operation, constant
pressure and simpler connection of the quick-couplings.
Bearing box with large contact surfaces
As Trima Plus has a powerfully dimensioned front loader, which will be
subjected to extreme forces, we have developed an entirely new bearing box. This can absorb and stabilise these stresses. A careful choice
of materials is combined with large contact surfaces, high precision,
profile extrusions and a reinforced box construction. We have also
succeeded in achieving a compact design that provides more room
for front wheels and mudguards.
More powerful pins
Strong support legs
Remember that all loads to which a front loader is subjected must
be taken up by the pins. We have therefore developed new pins for
the Trima Plus. Many of the pins are 25 % larger. The rotary locks
have also been strengthened. In order to further reduce wear and
axial play, as well as to keep the lubrication in the right place and the
dirt out, the pins are provided with a special tensioning device with a
compact disc and rubber ring. Effectively the pins
are fixed and sealed at both ends.
A ”simple thing” like support legs should
not prevent a smooth flow of work. We
are always aiming to achieve safer solutions. The slender, profile-pressed, more
powerful support legs are well integrated
with the front loader and are always easily accessible for when the front loader is
to be parked. The locking system makes
it easy to find the correct height.
A broad, articulated foot provides a
larger contact surface. No loose components to be lost!
In addition, all the pins are rustproof (electro-galvanised). Lubrication
is normally performed easily from the outside of the front loader.
Quick connection
Ready for most things
Trima Plus Lock stands for simple, secure
locking. When the front loader is put onto
the subframe, the bearing box guides
itself into position. All that has to be done
is to push in the locking pin, pull out the
locking button and turn the handle in
behind the locking button. To disconnect,
the button is pulled out, the handle twisted
off and the locking pin pulled out. The
handle can then be hung on the locking
button, so that it is always available.
Plus Lock is a typical Trima creation. The short,
robust locking pin has a diameter of 40 mm and
meets all the needs of new tractors, large front
loaders and heavy implements.
8
Reinforced cylinders
U-profile with many strengths
With regard to materials, design and manufacture, you could not want
anything else - Trima Plus cylinders are modern all the way through. The steep cylinder transitions are reinforced so that the loads can be absorbed and distributed
evenly. Trima Plus’ parallel linkage loaders have implement cylinders with through
piston rods which give a higher emptying speed. In addition, the piston rods are reinforced at three points, making any type of quick-emptying valve unnecessary. Double
bearings contribute to the longer service life of the cylinders.
U-profiles are an established Trima speciality. Trima Plus stands for increased
torsional and flexural rigidity, as well as for excellent steel quality. The beam is light
and the forces are distributed better through the entire construction. The 70 mm
wide profile comprises two U-profiles lying one inside the other. The welded joints
face in towards the tractor, giving a smooth, continuous surface that does not collect dirt. All the corners and edges on the profile-pressed plate halfway along the
arm are also attractively rounded off.
9
Because it works!
”Accessories that give even
more. That is Trima”
to develop their operations, it is a definite plus if you can offer even more of an edge when
required. Trima holds the position as “the driver’s best friend”.
Multi Doc 4
PlusDrive shock absorbers protect both drivers
and their loads. When driving on uneven terrain,
the tractor is more comfortable and offers better
manouverability. A very sensible optional extra that
also reduces unwelcome strains on the vital parts
of the tractor (read more on page 4).
The four hydraulic hoses are connected in no time
at all. Multi Doc 4 ensures that problems such as incorrect connection, oil leaks or overpressure in the
hoses never arise. The risk of dirt in the tractor’s
hydraulics and transmission is also avoided thanks
to the smooth connectors that are easy to clean.
™
Multi Doc 2
Depressurised
quick-couplings
Even though, in its basic version, Trima Plus provides users with professional opportunities
™
A good investment
The third service is integrated in the Plus Compact
Valve. The 4th service can also easily be connected.
All valves and cables are well protected under a panel.
Through carefully positioned hoses, the quick-couplings
are routed to the left side of the tool carrier, ensuring
a more comfortable working position. Thanks to a new
design, the quick-couplings are also depressurised,
further simplifying your work.
A very useful aid when the front loader is fitted with
either a 3rd or a 4th service. Anyone who has tried to
connect a hydraulic implement that has stood in the sun
all day will testify to this. With one simple operation, the
implement hydraulics are connected without difficulty,
even under pressure. Work can therefore start within
seconds. Like Multi Doc 4, Multi Doc 2 has smooth connectors that protect the tractor against dirt.
Extended reach
Auto Plus
- new implement locking
A tractor driver climbs up to and down from the cab
several times a day. With the new Auto Plus (hydraulic
implement locking), the number of times the driver has
to climb in and out is dramatically reduced. Connection
and disconnection take place simply from the driver’s
seat. Indicators on the tool carrier show when the implement is locked. Auto Plus is connected by using the
same 3rd service function in a different way. Under the
cross tube, in a protected location, a valve for switching
this on and off can also be found, built together with the
Plus Compact Valve. This can be activated from inside
the cab, which means that the driver controls the flow of
oil between Auto Plus and 3rd service.
Trima Plus can also be supplied with longer bearing
boxes to suit specific circumstances, providing additional reach, for example, over lorry sides. Lifting
height, lifting force and other specifications are otherwise unaffected.
Combi tool carrier
Users who want to have stronger, more versatile
implements and at the same time use older implements, can install one of our Combi tool carriers as
an optional extra, which jointly cover most loader
makes and hook types.
10
™
ElectroDrive CDC
Improve comfort and efficiency by installing ElectroDrive CDC in the tractor’s cab. The electrical and proportionally functioning CDC (Canbus Digital Control) provides
front loader operation with fingertip control, right out to the far end of the implement. If the front loader is equipped with hydraulic implement locking, 3rd and 4th
services, or electrical connection and disconnection of PlusDrive, these functions can also be handled using the compact joystick. In the case of more demanding applications, a “slow” function can be activated. ElectroDrive CDC can also be programmed for specific tasks, such as when bale wrapping. The implement is then opened
and closed using the joystick’s sideways movements. Similarly, individual needs for the tractor’s hydraulics can be programmed. As ElectroDrive CDC can be installed
together with an adjustable armrest, the working position can be continually regulated in order to avoid stresses on the operator’s shoulders, neck and wrists.
11
Because it works!
”Ready for everything.
That is Trima”
The new Trima Plus loader range provides front loaders for just about every tractor
and requirement. More powerful than ever before and with larger crowd and dump
angles, they are ready for higher lifting heights and demanding applications. All material qualities are of the highest standard and the manufacturing
tolerances are very narrow, resulting in an overall solution that
is extremely reliable - a fact that has been demonstrated while
Anytime, anyplace
With a Trima Plus and a bucket equipped with
its unique Non-Drop Design, you can change the
landscape in no time
Instead of a bad back
undergoing harsh and repeated tests. All in all, Trima Plus is a
A couple of tons of stones disappear quickly with
the aid of a stone fork and Trima Plus, with perfect
visibility from the driver’s seat.
formidable partner for the tractor. Secure and robust, with nothing
but well thought-out technical solutions. Most things can be done
better with a Trima Plus. Hard-working operators deserve
nothing less.
Great care
Tractor, Trima Plus and
a trailer
Large bags require safe, accurate handling. With
Trima Plus, the ten thousandth bag can be moved
with the same precision as the first.
You need nothing else to bring bales back to the
yard. Especially if the front loader has a high lifting
capacity.
As a forklift truck
Do it yourself
Here, the perfect mechanical parallel linkage has
the chance to show what it can do. Yet another
reason why Trima Plus is difficult to do without
on an efficient farm.
And save the expense. A powerful loader and an efficient grab can load many tons.
12
13
Because it works!
”Home in plenty of
time. That is Trima”
Every time a farmer sits down at the dinner table in good time and in a good mood, there is
an effective team in the background. Outside in the yard are two reliable work colleagues - the
tractor and the front loader. A front loader that is well-developed to meet the user’s needs: good
visibility from the driver’s seat, ready to obey the smallest lever movements, adapted for the
tractor’s hydraulic capacity, exceptional damping capacity, capable of rapid implement changes
and incorporating user-friendly technology.
Trima Plus is designed by engineers who are familiar with the farmer’s conditions and who understand
the tractor’s full potential. It is therefore also easier to come home alert after a long day at work.
Parallel linked loaders
Loader model
+2.0 P
+3.0 P
+4.0 P
+5.0 P
+6.0 P
+7.0 P
Tractor size
50-80
37-60
3.50
3.25
60-100
45-75
3.75
3.50
80-120
60-90
4.00
3.75
100-150
75-112
4.25
4.00
120-190
80-142
4.50
4.25
>150
>112
4.75
4.50
2400
2000
2700
2300
2850
2350
3500
2550
Lifting capacity, 800 mm from arm centre at 185 bar oil pressure
At ground level
kg
1500
1900
2050
At height 1.5 m
kg
1400
1750
1900
Full height
kg
1200
1550
1700
2300
2200
2000
2500
2350
2100
3000
2800
2250
Max. tear-out force
800 mm from arm centre
Crowd angle*
Dump angle*
Weight
3300
44°
53°
712
3800
43°
52°
760
3800
41°
53°
808
hp
kW
Lifting height at arm centre, m
Lifting height under implement, m*
Lifting capacity, at arm centre at 185 bar oil pressure
At ground level
kg
1800
2300
Full height
kg
1500
1900
kg
kg
1900
45°
58°
521
2800
43°
59°
585
2800
44°
55°
621
Non parallel linked loaders
Loader model
+1.0
+2.0
+3.0
+4.0
+5.0
Tractor size
50-70
37-52
3.20
2.95
50-80
37-60
3.50
3.25
60-100
45-75
3.75
3.50
80-120
60-90
4.00
3.75
100-150
75-112
4.25
4.00
2700
2200
2800
2300
3100
2600
Lifting capacity, 800 mm from arm centre at 185 bar oil pressure
At ground level
kg
1200
1400
1750
At height 1.5 m
kg
1100
1300
1650
Full height
kg
950
1150
1450
1900
1800
1600
2150
2050
1850
Max. tear-out force
800 mm from arm centre
Crowd angle*
Dump angle*
Weight
2700
44°
55°
554
3200
44°
53°
628
hp
kW
Lifting height at arm centre, m
Lifting height under implement, m*
Lifting capacity, at arm centre at 185 bar oil pressure
At ground level
Full height
kg
kg
1900
1500
2200
1750
800 mm
Lifting force at arm centre
kg
kg
1850
41°
55°
436
1850
45°
58°
450
2700
43°
59°
515
Lifting force 800 mm from
arm centre
Tear-out force 800 mm from
arm centre
A counter-weight must be used for safety reasons, normally approximately 800 kg. Contact Trima for more precise details. Crowd and dump angles can vary slightly depending on the type of
implement. Trima’s loaders are CE marked and comply with the Machine Directive’s rules and regulations. The regulations describe how the machine should be designed with regard to health,
safety and the environment. Technical data can vary depending on tractor model.
* Varies depending on implement.
14
15
Because it works!
+2.0 P
+3.0 P
M
M
M
4
4
4
3
3
3
2
2
2
1
1
1
0
500
1000
1500
2000
2500
3000
3500
0
kg
500
1000
1500
Tractor size
50-80 hp
37-60 kW
Lifting height at arm centre
Lifting capacity at arm centre
At ground level
Full height
Trima parallel linked loaders
2000
2500
3000
3500
kg
0
3.50 m
Lifting height at arm centre
3.75 m
1,800 kg
1,500 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
1,500 kg
1,400 kg
1,200 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
1,900 kg
1,750 kg
1,550 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
Max. tear-out force 800 mm
from arm centre
1,900 kg
Max. tear-out force 800 mm
from arm centre
2800 kg
Max. tear-out force 800 mm
from arm centre
521 kg
Weight excl. subframe
2800 kg
585 kg
Weight excl. subframe
+6.0 P
3
3
2
2
2
1
1
1
2000
2500
3000
3500
Tractor size
100-150 hp
75-112 kW
Lifting height at arm centre
Lifting capacity at arm centre
At ground level
Full height
0
500
1000
1500
2000
2500
3000
3500
Tractor size
120-190 hp
80-142 kW
4.25 m
Lifting height at arm centre
2,700 kg
2,300 kg
Lifting capacity at arm centre
At ground level
Full height
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
Max. tear-out force 800 mm
from arm centre
Weight excl. subframe
17
kg
621 kg
+7.0 P
3
1500
kg
0
500
1000
1500
2000
2500
3000
3500
Tractor size
> 150 hp
> 112 kW
4.50 m
Lifting height at arm centre
4.75 m
2,850 kg
2,350 kg
Lifting capacity at arm centre
At ground level
Full height
3,500 kg
2,550 kg
2,300 kg
2,200 kg
2,000 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
2,500 kg
2,350 kg
2,100 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
3,000 kg
2,800 kg
2,250 kg
3300 kg
Max. tear-out force 800 mm
from arm centre
3800 kg
Max. tear-out force 800 mm
from arm centre
3800 kg
712 kg
kg
4.00 m
2,050 kg
1,900 kg
1,700 kg
4
1000
3500
2,400 kg
2,000 kg
4
500
3000
2,300 kg
1,900 kg
4
Tear-out force 800 mm from
arm centre
2500
Lifting height at arm centre
M
Lifting force 800 mm from
arm centre
2000
Lifting capacity at arm centre
At ground level
Full height
M
Lifting force at arm centre
1500
Tractor size
80-120 hp
60-90 kW
M
800 mm
1000
Tractor size
60-100 hp
45-75 kW
+5.0 P
0
500
Lifting capacity at arm centre
At ground level
Full height
Weight excl. subframe
16
+4.0 P
Weight excl. subframe
760 kg
Weight excl. subframe
808 kg
kg
Because it works!
+1.0
+2.0
+3.0
M
M
M
4
4
4
3
3
3
2
2
2
1
1
1
0
500
1000
1500
2000
2500
3000
3500
kg
0
500
1000
1500
Tractor size
50-70 hp
37-52 kW
Lifting height at arm centre
Lifting capacity at arm centre
At ground level
Full height
Trima non parallel linked loaders
3.20 m
Lifting height at arm centre
1000
1500
2000
2500
3.50 m
Lifting height at arm centre
1,400 kg
1,300 kg
1,150 kg
Max. tear-out force 800 mm
from arm centre
1850 kg
Max. tear-out force 800 mm
from arm centre
1850 kg
Max. tear-out force 800 mm
from arm centre
436 kg
Weight excl. subframe
3
2
2
1
1
500
1000
1500
2000
2500
3000
3500
Lifting height at arm centre
Lifting capacity at arm centre
At ground level
Full height
kg
0
500
1000
1500
2000
2500
Lifting height at arm centre
2,700 kg
2,200 kg
1,750 kg
1,650 kg
1,450 kg
2700 kg
450 kg
3000
3500
4.25 m
2,800 kg
2,300 kg
Lifting capacity at arm centre
At ground level
Full height
3,100 kg
2,600 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
1,900 kg
1,800 kg
1,600 kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
2,150 kg
2,050 kg
1,850 kg
Max. tear-out force 800 mm
from arm centre
2700 kg
Max. tear-out force 800 mm
from arm centre
3200 kg
Weight excl. subframe
554 kg
Weight excl. subframe
3.75 m
2,200 kg
1,750 kg
Tractor size
100-150 hp
75-112 kW
4.00 m
3500
Lifting capacity at arm centre
At ground level
Full height
Weight excl. subframe
+5.0
3
3000
Tractor size
60-100 hp
45-75 kW
1,200 kg
1,100 kg
950 kg
4
19
500
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
Tractor size
80-120 hp
60-90 kW
18
0
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
4
Tear-out force 800 mm from
arm centre
kg
Lifting capacity, 800 mm
from arm centre at
185 bar oil pressure
At ground level
At height 1.5 m
Full height
M
Lifting force 800 mm from
arm centre
3500
1,900 kg
1,500 kg
M
Lifting force at arm centre
3000
Tractor size
50-80 hp
37-60 kW
+4.0
800 mm
2500
Lifting capacity at arm centre
At ground level
Full height
Weight excl. subframe
0
2000
628 kg
kg
515 kg
kg
Because it works!
”Thirteen pages of excellent
implements, made for professionals. That is Trima”
All drivers know that it is the implement that does all the work.
In order to satisfy our customers’ expectations, we invest considerable resources
in developing implements that do justice to the best front loaders on the market.
Accept no compromises. Choose Trima for implements and enjoy many years’ efficiency with no problems along the way.
20
21
Because it works!
Buckets
Buckets
3
1
2
The loader cannot function
without implements
5
4
Every day of the year our loaders are operating in agriculture, industry, contracting and public services.
6
Without good-quality, versatile implements, the loaders would not be as useful. This is why we invest
considerable resources in developing implements that do the loaders justice. This investment and effort
has resulted in us also being the world’s largest producer of implements for front loaders.
A bucket is not just a bucket
All buckets are conical and are therefore easy to fill, as the material does not need to be pressed into the bucket. The conical, ”hopper-
Implement hooks for freedom of choice
shaped” design also allows rapid and complete emptying of the bucket. No matter what your needs are or what demands you stipulate, you will be able to find your new bucket in our range. There are six different models and a total of 21 different variants.
Our implements have alternative implement hooks that are suitable for most loader makes.
There is also a special, high tip bucket and a grading bucket.
A
A: Euro
The non-spill bucket
Implement hooks suitable for Trima with Euro Tool carrier, Quicke series Q and other
We all know that today’s buckets are subjected to larger loads and more hours of operation than before. Both tractors
and front loaders have been made larger and more powerful. The buckets need to be wider and hold a larger volume.
loader makes with Euro implement tool carriers.
We have therefore chosen an even stronger and better grade of steel. In addition, we use profile-pressed and laser cut
sheet-metal.
B: SMS
This unifies the need for extra strength with the desire for an attractive design.
1. The buckets have a round bottom and a conical shape. Numerous small bends make the bucket strong and the conical design allows simple filling and complete emptying.
Adapted for Trima/Bergsjö with SMS tool carrier, Quicke Combi tool carrier,
Kellve/Vreten/Howard as well as other loaders with SMS tool carrier.
C: Ålö type 3
2. In order to achieve even greater torsional strength and stability, the wider buckets have been supplied with an extra,
profile-pressed, double back plate (not on the L and LV models). With the aid of a special overlap design, the HV buckets now have a hole profile along the implement hooks, which makes these buckets stronger and more stable.
B
3. The upper edge of the bucket back is pressed in a U-profile. In this area on the HD buckets there is a further welded
angle profile along the length of the bucket.
Suitable for fully hydraulic loaders that preceded Quicke Serie Q.
4. The ends have a profile extrusion that makes the sides even stronger (not on the L and LV models). At the bottom is
a welded triangular wearing piece, which simultaneously stabilises the cutting edge. On the HD buckets, this wearing
piece runs all the way up along the end side.
Some implements are also suitable for loaders with Volvo BM type tool carrier.
5. All buckets have extremely strong cutting edges (500 Brinell). Depending on bucket model and size, 12, 16 or
20 mm thick and 100, 150 or 200 mm wide cutting edges are used. Together with the parallel reinforcing bars, the
bucket bottom consequently extremely strong, torsionally stable and hard-wearing.
6. The implement hooks also contribute to a strong construction. Note that both hooks and locking holes are located
along a bend. Depending on bucket model and size, there may be a double profile inside the bucket.
C
Non-drop design
It has been a natural objective to design and produce a bucket that does not allow spillage. What’s the point of having a bucket
with a large volume if it cannot be properly filled, or if it spills material? Our buckets therefore have laser-cut ends. As a result, it
is possible to create a bucket design where the rear edge and in particular the front edge are especially high. It is now possible
to completely fill the bucket. You have complete control over the material, and the bucket does not drop any material.
22
23
Because it works!
Buckets
Series HT
Series H
The soil bucket - the most popular in the range - can do everything. The short
bucket bottom makes the bucket strong and well suited to heavier tasks. The
three large buckets have an extra profile and round pressed back plate across
the full width.
Series H
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
Buckets
Buckets
135H
160H
0.54 m3
135 cm
81 cm
75 cm
150/16 mm
147 kg
0,65 m3
160 cm
81 cm
75 cm
150/16 mm
166 kg
A strong material and snow bucket. The series is aimed at users who require a
large volume. The generous volume measurements are achieved by designing
the bucket deeper and taller. All models have double profiles in the bottom as well
as along the implement hooks. There is consequently extra strength where the
stresses are greatest.
Soil bucket with teeth. Same design as series H.
Series HT
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Number of teeth
Weight
Series L
Series HV
135HT
160HT
0.54 m3
135 cm
81 cm
75 cm
150/16 mm
6
152 kg
0,65 m3
160 cm
81 cm
75 cm
150/16 mm
7
172 kg
Series HV
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
200HV
220HV
1.16 m3
200 cm
104 cm
85 cm
150/16 mm
273 kg
1.28 m3
220 cm
104 cm
85 cm
150/16 mm
294 kg
240HV
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
Series H
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight, kg
185H
210H
240H
0.72 m3
185 cm
81 cm
75 cm
150/16 mm
205
0,82 m3
210 cm
81 cm
75 cm
150/16 mm
252
0,95 m3
240 cm
81 cm
75 cm
150/20 mm
294
Series HT
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Number of teeth
Weight
185HT
210HT
0.72 m3
185 cm
81 cm
75 cm
150/16 mm
8
211 kg
0.82 m3
210 cm
81 cm
75 cm
150/16 mm
9
259 kg
1.70 m3
240 cm
109 cm
98 cm
200/20 mm
415 kg
Light bucket. If the bucket is only to be used for lighter duties, the L bucket is
an excellent choice. The bucket is designed for customers who value functionality ahead of technical benefits. The price is therefore extremely competitive.
Series L
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
130L
180L
0.51 m3
130 cm
80 cm
75 cm
100/12 mm
136 kg
0.71 m3
180 cm
80 cm
75 cm
100/12 mm
171 kg
In the emptying position,
the frontloader’s effective
emptying stop ensures
controlled and complete
emptying of the implement.
Note also how the “boomerang-shaped” link on the
frontloader contributes to a
maximum emptying angle.
260HV
1.85 m3
260 cm
109 cm
98 cm
200/20 mm
443 kg
Serie LV
Light Volume bucket. This bucket series is suitable for handling grain, manure,
grass seeds, wood chips and other materials with a low volume weight. The
buckets have two vertical reinforcements along the implement hooks.
Which bucket should I choose?
Series HD
Contracting bucket. The very strongest buckets in the series. The starting point is the
H bucket. On the 210, 240 and 260, the metal is 20 % thicker however. In addition,
the HD buckets have a more powerful cutting edge, a wider, longer floor reinforcement, an extra angle reinforcement on the inside of the bucket along the implement
hooks, as well as an angled wearing rail on the rear of the bucket.
Areas of application
H
HT HV HD
Lighter excavation
and loading work
Loading e.g. grain,
wood chips and snow
Series HD
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
185HD
0.72 m3
185 cm
81 cm
75 cm
150/20 mm
235 kg
240HD
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
0.95 m3
240 cm
86 cm
75 cm
200/20 mm
340 kg
Loading of lighter materials
at high level
210HD
0.82 m3
210 cm
81 cm
75 cm
150/20 mm
285 kg
Heavy excavation and
loading work
Work in gravel/sand,
earth and stone
260HD
Series LV
1.03 m3
260 cm
86 cm
75 cm
200/20 mm
365 kg
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
200LV
220LV
1.13 m3
200 cm
100 cm
85 cm
100/16 mm
243 kg
1.25 m3
220 cm
100 cm
85 cm
100/16 mm
262 kg
Contract work in gravel
/sand, earth and stone
Grading work
Professional snow clearance
Best choice
24
25
Good choice
L
High Grad.
LV tip buck.
Because it works!
Buckets
Forks
High tip bucket
Bale implement
Universal fork
High tip buckets are used for handling voluminous
materials at high levels, for example
for loading grain, grass seed,
beet or wood chips.
Multi Doc 2
Easier implement changes
The high tip bucket increases the unloading height
by 120 cm. As a result, even a short, compact
front loader can fill a high trailer if necessary. The
bucket tips over its front edge, and it is not therefore necessary to wait for the front edge to be
lifted over the truck side before you can reverse
away. This saves time and increases productivity.
Quadrogrip
®
Total width
Bale size
Arm length
Weight
Without doubt the most powerful stone/universal fork on the market. On the
specially hardened box section, which does not become deformed under load,
powerful stone fork tines are installed.
The back comprises five transverse
80 x 40 profiles. The design is
incredibly torsionally rigid, at the
same time as offering excellent
visibility. On the sides, the
forks are supplied with powerful Hardox teeth.
Universal fork
Width
Height
Tine length
Number of bottom tines
Pin distance
Weight
150
200
150 cm
73 cm
98 cm
14
11 cm
249 kg
200 cm
73 cm
98 cm
18
11 cm
310 kg
230
2,00 m3
230 cm
120 cm
120 cm
150/20 mm
480 kg
”Pick up and keep”. The distinctive design provides considerable opportunities to fill the implement without dropping any stones already contained in the
bucket. At the front, tines made of Hardox steel are installed that are specially
angled down. After many hours of work, these can easily be replaced. The
transverse profiles (50 x 100 mm) provide stability for the 30 mm thick tines.
Note also that the back of this model is higher than on earlier models.
Multi Doc 2
Flexibal
®
Easier implement changes
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
200
235 cm
60-200 cm
130 cm
418 kg
Quadrogrip is the best implement on the market for handling wrapped square and round bales. The implements arms
are seated on 350 mm wide, extremely stable sliding plates, which move along the main frame. When stacking, it is
possible to lock either the right or left arm, which makes for easier work. The sliding rails are interchangeable and
made of high-quality polyethylene, which does not require lubrication. These sliding
surfaces are also vertical so that dirt cannot become trapped. This results in reduced friction, almost silent arm movements, minimal wear and a long service life.
Stone fork - Professional
High tip bucket
Quadrogrip
Flexibal
Weight 195 kg
Bale size max. 180 cm
Bale support
Weight 45 kg
Grading bucket
A powerful grading bucket. Thanks to the low back plate and the long,
strong bottom, the driver has perfect visibility to the tip of the bucket. The
bucket is supplied with a 20 mm, powerful cutting edge. On the rear, below
the 20 mm thick subframe plates, is a welded 10 mm thick angle iron,
which reinforces the bucket for grading jobs.
Stone fork - Pro
Width
Depth
Height
Number of bottom tines
Tine distance
Weight
150
200
150 cm
100 cm
73 cm
14
11 cm
235 kg
200 cm
100 cm
73 cm
18
11 cm
292 kg
Three implements in one
Grading bucket
Volume (heaped)
Width
Depth
Height
Cutting edge WxT
Weight
Flexibal is a strong and very versatile implement. The 125 mm thick, rotating steel tubes are mounted on two powerful stone fork tines. The steel tubes are hydraulically adjustable sideways. When the bale is handled, the steel tubes roll
carefully in under the bale. The tubes’ generous length and diameter distribute the pressure evenly over the bale. When
straw or hay bales are to be transported, the steel tubes can be dismantled quickly and easily. With the tubes removed,
Flexibal can also be used for pallet handling (max. 1,000 kg).
220
0,65 m3
220 cm
110 cm
50 cm
150/20 mm
337 kg
As an option Flexibal can be equipped with adjustable bale support that is installed on the back of the implement. This
provides the potential to either handle larger bales or to stack bales on their ends.
26
27
Because it works!
Bale implement
Bale implement
™
Flexigrip
Silosplit
®
Flexigrip
For bale sizes, min.max.
Weight
160
200
120-160 cm
242 kg
150-200 cm
262 kg
Bale unwinder
Using just one implement, you can both transport the bale as well as tear up and distribute
it. The bale unwinder is an operationally reliable
implement for feeding or spreading out straw for
free-range farmyard animals. The efficiency can
be further increase if the implement is equipped
with the hydraulically powered shredder.
Split the bale with ease and cheaply
Storing the bales upright on top of each other reduces the risk of air and moisture penetrating into the bales.
3RD SERVICE REQUIRED
Bale unwinder
Until now, splitting bales has entailed hard work or considerable expense.
If you have a loader with dual-action lifting cylinders, you can solve the
problem thanks to Silosplit.
The implements arms are housed in powerful hinged points with replaceable bushings. Both the right or left
arm can be locked independently, but there is still some mobility, which makes it possible to stack the bales
tightly without damaging the plastic. In addition, the implements arms are designed so that it is easy to reverse out from the bale, and this is also an advantage when the bales are to be stacked tightly.
Multi Doc 2
™
Unigrip
Width
Centre tine
Side tines, 3 pcs
Requirements for hydraulic
Pressure
Flow
Weight
Silosplit can both transport and split bales. When you have placed the
bale where it is to be split, you place the blade across the top of the bale
and press down. Both straw and silage bales fall apart in two pieces,
simply and smoothly without complicated extra hydraulics. It is then easy
to handle the material. Silosplit is supplied with an easy-to-use blade
guard to provide protection from the sharp cutting edge.
Easier implement changes
The uniquely curved, rounded shape together with the 90 mm thick tubes contribute greatly to the very careful
handling of both vertical and horizontal bales. Note in particular the long, curved tubes, curved in one piece
with no sharp edges or welded joints. The upper tube extension is a Trima speciality that provides significantly
better support when the bales are handled horizontally.
PATENT
Shredder
Silosplit is naturally patented.
Silosplit
Weight
Width
Depth
M
HD
85 kg
120 cm
140 cm
110 kg
120 cm
170 cm
Arm length
Hydraulic cylinder
”shredder tines”
Weight
DB 2115
160
120-160 cm
240 kg
Unigrip has a tested and proven design and a low net weight. It carries out the same tasks as Flexigrip.
The choice between these implements depends on the individual user’s work routines. Unigrip is also well
suited for smaller square bales (80 x 80 - 130-160 cm).
The implements arms distribute the pressure evenly over a large area, and this ensures careful handling of
the bales. The arm tubes have a powerfully dimensioned diameter. Unigrip also has a large tube diameter
and no sharp edges, so that the plastic around the bale is not damaged.
DB 4000
Equip your front loader with 115 cm extra lifting height, so that you can stack
the bales even higher. The DB 2115 is an excellent implement, particularly for
those who require a high lifting height with short, manoeuvrable loaders.
For safe handling of 2-4 bales
The bales are securely held between the tines
and the upper section. In other words, there is no risk of dropping the bales
during transport or stacking. The mast is both telescopic and hydraulic. The
height of the upper section can vary from 95 cm to 195 cm.
DB 2115
Weight 200 kg
Increased lifting height 115 cm
Number of bales 4-5
[bale height 120 cm]
Bale size max. 130 cm
Grip, lift and turn the bale. Then transport it to
the storage place, where stacking to at least the
height of three bales is a simple matter.
28
29
Easier implement changes
130
90-130 cm
200 kg
120 cm
1
5
20 kg
Multi Doc 2
Silaging in plastic bales can produce first-class
silage. However, the bottleneck in this process is
often the implement that has to handle and transport the bales. It is therefore important to select
a quality product that can handle the bales in the
right way. If the implement is not good enough, it
can break or damages the bale plastic, and the
whole process stops, expensive equipment and
manpower are at a standstill and the quality of the
silage is impaired.
Our implements are characterised by powerful
bearings in the arms, large implements areas so
that the pressure is distributed optimally and the
total absence of sharp edges. We accept no compromises - quality has to be the very best.
Unigrip
180 bar
40 l/min
160 kg
4TH SERVICE REQUIRED
Select the best equipment
For bale sizes, min.max.
Weight
78 cm
110 cm
55 cm
DB 4000
Weight
Number of tines
190 kg
4 pcs
Because it works!
Bale implement
Silage implements
Square Bale Fork - Safety
Silocut
®
Perfect silage blocks in
just a few seconds
Silocut is a versatile and extremely reliable implement with low
maintenance costs. Thanks to the hardened cutting blades at both the
front edge and in the side sections, Silocut leaves a clean cut surface
in the silo. This prevents the admission of air and heat generation, critical
for the quality the silage. Pay particular attention to the angled side blades
that cut against the sideplate of the implement back. This function, which is
not an obvious feature on implements of this type, ensures maximum cutting
force, particularly when the block is to be cut free.
The box section is made of a hardened material that ensures good durability
and a long service life. The tines are of the very best quality.
The Square Bale Fork’s folding box section is a new and valuable
safety detail. Firstly you can lock the tines in the upright position,
increasing safety during transport, particularly on public roads.
Secondly you get more efficient and safer handling. When unloading, the bales are pushed into place by the main frame. If unloading
takes place at full height, the top bale is pushed into place with the
aid of the upper section of the implement, without the long tines being pressed down into the bales. As a result, there is no risk of the
bales falling back when you reverse.
Silocut
Weight
Block size
max.
Block volume, max
Opening
Number of tines
Working width
The Square Bale Fork can be supplied with two different frames.
The 190 cm frame is suitable for long, large bales. The 140 cm
frame is supplied with two tines as standard, although this number
can be increased to a total of five.
110
150
190
345 kg
112 x 80 x 80 cm
x 80 cm
0.71 m3
80 cm
9 pcs
110 cm
390 kg
152 x 80 x 80 cm
x 80 cm
0.97 m3
80 cm
13 pcs
150 cm
530 kg
192 x 80 x 80 cm
x 80 cm
1.23 m3
80 cm
16 pcs
190 cm
PATENTED SOLUTION FOR SAFE HANDLING
As optional extra equipment, the Square Bale Forks can be supplied with a rear extension (for handling more bales) or a bag lifter
(for handling large bags).
Square Bale Fork - Safety
140
190
133 kg
140 cm
2 pcs
125 cm
168 kg
190 cm
5 pcs
125 cm
PATENT
™
Silocut MG
The completely closed design has been specially developed for
maize silage and other silage types that often spill out. The serated blade provides fantastic cutting capacity in the silage. The
back of the implement supplied with a mesh. Otherwise MG is
made according to the same solid quality principles as Silocut.
Square Bale Fork - standard
Bale spike
The Square Bale Fork is a simple, robust
implement for both round and square bales.
The tines in the box section can be installed
with a separation of 80 or 130 cm. As an
optional extra, the fork can be supplied with a
U-shaped vertical rear extension, which helps
to support the top bale.
Square Bale Fork - standard
The bale spike is particularly well suited to
handling round bales. The longer tine ensures
safe transport of the bale. The shorter tine
prevents the bale from wobbling and rotating
during stacking.
Weight
Width
Number of tines, standard
Tine length
Bale spike
Weight
Width
Tine length
60 kg
115 cm
110 cm
Silocut MG
78 kg
140 cm
2 pcs
82 cm or 125 cm
Weight
Block size
max.
Block volume, max
Opening
Number of tines
Working width
Extension
Weight
42 kg
30
31
Multi Doc 2
Easier implement changes
Weight
Width
Number of tines, standard
Tine length
As the implement works best with the sharpest possible blades, there is a
risk of injuries to people and animals. For this reason, Silocut is supplied
with a guard that covers the front and side blades. This safety feature is only
available on Silocut.
150 MG
190 MG
480 kg
152 x 80 x 74 cm
x 74 cm
0.90 m3
74 cm
13 pcs
150 cm
580 kg
192 x 80 x 74 cm
x 74 cm
1.14 m3
74 cm
16 pcs
190 cm
Because it works!
Silage implements
Silage implements
™
Silograb
Multigrab HD
®
Multigrab HD is a very powerful implement. When filling silage, the bucket
tip is driven towards the silo, the powerful upper arm is pressed down
through the silage and into the bucket. The special design of the teeth creates a block with a good cut surface. This reduces the admission of air and
heat generation in the silage. Thanks to its incredible strength, the Multigrab
HD can also be used for many other demanding fork and bucket tasks.
Multigrab HD
Weight
Width
Volume
Depth
All models have two hydraulic cylinders. On the large models, the cylinders are 15 % larger. The 210 to 250 models are supplied with a
mesh construction in the upper section.
Silograb
180
200
500 kg
180 cm
1.00 m3
80 cm
560 kg
200 cm
1.14 m3
80 cm
Multi Doc 2
™
Maxi Grapple
The bucket is based on the powerful, reinforced HD bucket. The grapple arm is installed on the rear of the bucket, which also contributes to the implement’s
strength. The movable, profile-pressed upper section is supplied with strong bearings, three-layer bushings and large pivot pins with stable locking. The section with the powerful Hardox teeth is botled in place. Stress and torsion forces are thereby transmitted to the entire construction. The teeth (version T) are
simply botled in place with a bolt in the bucket bottom. The protective mesh means that loose material does not drop down
onto the tractor (optional extra).
130
150
170
190
210
230
250
250 kg
130 cm
0.69 m3
85 cm
270 kg
150 cm
0.79 m3
85 cm
300 kg
170 cm
0.90 m3
85 cm
320 kg
190 cm
1.01 m3
85 cm
355 kg
210 cm
1.11 m3
85 cm
377kg
230 cm
1.22 m3
85 cm
405 kg
250 cm
1.33 m3
85 cm
7+7 pcs
8+8 pcs
9+9 pcs
10+10 pcs
11+11 pcs
12+12 pcs
13+13 pcs
Maxi Grapple is used particularly in the USA and Canada for handling round bales
(large opening of 2 m), loose hay, twigs and branches, loose silage, manure and for
general bucket work. Teeth, protective mesh and grapple arm can easily be removed
when only the bucket is to be used.
Multi Doc 2
Multibenne
Easier implement changes
Weight
Width
Volume
Depth
Number of tines
in the fork
160
460 kg
160 cm
0.86 m3
80 cm
Easier implement changes
Silograb is an extremely versatile implement. The close tine distribution almost eliminates the spillage of silage. The tines are mounted in
a specially hardened box section (approximately six times larger than
standard profiles), which does not turn or deform under load. The tines follow a circular movement through the material, which produces the cleanest
cut, the least power consumption and the longest service life for the tines.
In addition the material is pressed against the back of the implement when
the pins are lowered, and this means that the silage remains in place, even
when driving over uneven terrain.
Maxi Grapple
The perfect all-round implement
If you have a diet feeder that is to be loaded with
various feeds, Multibenne is the best choice.
The wishes and requirements to which we have paid
particular attention are that: It should be perfect for the
purpose - namely silage handling. The side ends are therefore tapering so that they can be inserted into the silage more
easily. When the implement is tipped backwards, the high ends
come into action, so that loose material is not lost. A relatively
short bottom makes it easier to fill the entire bucket, all the
way in to the back. The centre of gravity then moves closer
to the tractor, and when unloading into high-sided vehicles,
the bucket tip does not protrude as far into the vehicle. The
closed bucket bottom and the close tine location results in
reduced spillage. With the close bucket bottom, you can
always completely gather up the material.
210
210 T
240
Weight
Width
Depth
Teeth length
605 kg
210 cm
81 cm
-
620 kg
210 cm
81 cm
24 cm
640 kg
240 cm
86 cm
-
240 T
260
260 T
Weight
Width
Depth
Teeth length
655 kg
240 cm
86 cm
24 cm
710 kg
260 cm
86 cm
-
730 kg
260 cm
86 cm
27 cm
Manure fork
Three advantages that make a lot of difference: Our manure forks are
equipped with a specially hardened box section that neither deforms nor
turns when working. The tines are installed before the implement is painted
- metal to metal. The tines are secured with a very high torque.
All in all, you get an implement with a longer service life.
Multibenne, which is designed according to the
same principles as Silograb, can handle many
different types of fodder, including manure.
As a result, it is not necessary to switch
between implements when feeding.
Manure fork
Multibenne
130
150
170
190
210
230
250
Weight
Width
Volume
Depth
Number of tines
in the fork
280 kg
130 cm
0.66 m3
80 cm
304 kg
150 cm
0.76 m3
80 cm
360 kg
170 cm
0.86 m3
80 cm
386 kg
190 cm
0,96 m3
80 cm
423 kg
210 cm
1.07 m3
80 cm
447 kg
230 cm
1.17 m3
80 cm
477 kg
250 cm
1.27 m3
80 cm
7 pcs
8 pcs
9 pcs
10 pcs
11 pcs
12 pcs
13 pcs
32
33
130
150
170
Weight
Width
Depth
Number of tines
123 kg
130 cm
85 cm
7 pcs
136 kg
150 cm
85 cm
8 pcs
152 kg
170 cm
85 cm
9 pcs
190
230
Weight
Width
Depth
Number of tines
165 kg
190 cm
85 cm
10 pcs
203 kg
230 cm
85 cm
12 pcs
Because it works!
Lifting implement
The upper profile is made in a single piece. This profile with holes for lateral adjustment provides robust securing of
the forks. The load is distributed over a large area thanks to the wide load-bearing surfaces of the forks. With this
special design, breaks in the arm are avoided and you get to operate a very stable fork that does not ”dangle”.
The forks are naturally approved with a large safety margin.
Pallet forks
Pallet forks
1,000 kg 1,600 kg 2,500 kg
Weight
Max. load
Width
Fork length
Fork height
Fork type
122 kg
1,000 kg
140 cm
97 cm
50 cm
profile
160 kg
1,600 kg
140 cm
97 cm
92 cm
wrought
170 kg
2,500 kg
140 cm
120 cm
95 cm
wrought
Accessories - Pallet forks
Bale spike
Weight
Bale spike (one short and one long tine).
For installation on the pallet fork subframe.
24 kg
Log grab attachment
Suitable for fork kits 1,000 kg,
1,600 kg and 2,500 kg
Weight
Big bag lifter
Service is everything
85 kg
For safe handling of large bags.
The height of the hook above the
ground is normally the same as when
the bottom of the large bags is level with
the lowest point of the front loader when
the bags are hanging from the big bag lifter.
Note the practical benefit of having the hook
bent to the side. The hook can easily be seen
from the driver’s seat.
Excellent access to spare parts, good service opportunities, well-trained service
personnel and close proximity to rapid assistance are decisive for a front loader’s efficiency and service life. All Trima customers should be aware that they are backed
up by a solid organisation.
+ In order to support our customers, Trima’s organisation,
Big bag lifter
Weight
Max. load
Width
Height
from sales staff to service personnel, focuses on the user’s
118 kg
1,000 kg
120 cm
170 cm
need for rapid service.
+ Trima has a comprehensive service network close to
the customer.
Accessories
Counter-weight
+ Spare parts are available wherever Trima is sold.
The counter-weight is an extremely useful piece of equipment. You
should remember always to have the
same weight on the back of the tractor
as on the front loader. With the loose
implement bar, the counter-weight can be
quickly put on and taken off. The counterweight contributes to:
+ Our customers have access to spare parts information,
3-point linkage
instructions and other vital information via Internet.
This implement can be used like the tractor’s
3-point linkage to help move some implements
around the farm. Available with either Euro or
SMS hooks.
+ Technical support is always close at hand for the customer.
Continual training and information mean that all Trima representatives can assist customers with considerable expertise.
• better stability and weight distribution
• reduced load on the front wheels and
front axle
• better contact with the ground, giveing
improved traction
+ Trima has always worked in close co-operation with users, and
we are happy to receive your opinions and proposals for improvements. Our careful following-up provides important support in the
Weight, empty
Weight, filled min.
125 kg
1000 kg
Weight
development of new loaders, implements and subframes. A new Trima
78 kg
is always developed to meet today’s and tomorrow’s requirements!
34
35
Best nr 1114 4179
ps.pondus: 0409. photo: jostein skeidsvoll. repro: umerepro Bild & Media
Because it works!
Ålö AB, SE 901 37 Umeå, Sweden
Tel: +46 (0)90-17 05 00. Fax: +46 (0)90-17 05 99
www.alo.se
The front loaders in the brochure have extra equipment. Certain products may be optional extra equipment. Some of the products are not available on all markets. Working with front loaders and accompanying implements is not without risks.
Serious injuries and damage can occur to people and materials in the event of incorrectly carried out work. Show consideration to your surroundings, use common sense and comply with local laws and regulations. Always read the instruction
manual supplied carefully. Only use original spare parts and accessories. Ålö’s product range is continually being developed. We reserve the right at any time to alter specifications, prices and versions with no obligation on our part.
®, ™ Trademarks of Ålö AB.