lectro® lyte 600 salt - Marketplace for chemical industry

[email protected]
www.fmclithium.com
1.888.lithium
LECTRO® LYTE 600 SALT
CAS No. 7447-41-8
QS-PDS-2011 Revision: 00
Chemical Name
Formula
FMC Product Code No. 672-01-062
Lithium Chloride, Electrochemical Grade
LiCl
Appearance
White powder*
Application
Electrolyte salt for lithium batteries
Product Specifications
LiCl
H2O*
Alkalinity (as Li2CO3)
CaCl2
NaCl
Fe2O3
SO4
Insoluables (in HCl)
99.3 wt% min
0.6 wt% max
300 wppm max
300 wppm max
150 wppm max
20 wppm max
60 wppm max
50 wppm max
o
* Value (as weight loss) determined by drying at 350 C for 45 minutes.
Physical Properties
Formula weight
True density
Melting point
Toxicity/Safety Data
White granular solid or powder, odorless. This product is moderately irritating to
the skin, eyes, nose and throat. Ingestion may cause drowsiness, weakness,
tremors, anorexia, nausea, blurred vision, and muscle spasm.
42.40
3
2.07 g/cm
608°C
COMPLETE INFORMATION ON TOXICITY AND SAFETY IS CONTAINED IN
THE FMC MATERIAL SAFETY DATA SHEET (MSDS) AVAILABLE FOR THIS
PRODUCT.
Handling/Storage/Disposal
Avoid contact with eyes, skin or clothing. Use with adequate ventilation. Wear
safety glasses or goggles and rubber gloves. Wash thoroughly after handling.
Keep away from strong acids. Keep container closed.
* Occasional dark particles may be visible and scattered in the product. The particles have no
detectable effect on product purity and will not be cause for rejection.
NORTH AMERICA
AND HEADQUARTERS
FMC Lithium
Seven LakePointe Plaza
2801 Yorkmont Road, Suite 300
Charlotte, NC 28208
P: +1.704.426.5300
F: +1.704.426.5370
EUROPE
FMC Chemicals
Commercial Road
Bromborough
Merseyside
CH62 3NL, England
P: +44.151.482.7356
F: +44.151.482.7361
JAPAN
FMC Lithium
9F, Aoyama Building
1-2-3, Kita-Aoyama
Minato-ku, Tokyo
107-0061, Japan
T: +81.3.3402.3716
F: +81.3.3402.3700
CHINA
FMC Lithium
15F Far East International Plaza
No. 317 Xianxia Road
Shanghai 200051 P. R. China
T: +86.21.6235.1919
T: +86.21.6235.1917
INDIA
FMC India Private Limited
Embassy Star
8, Palace Road
High Grounds
Bangalore 560052, India
T: +91.80.2238.4311
F: +91.80.2238.5255
TAIWAN
FMC Lithium
9F-1, 263 Tun Hwa S. Rd.
Sec. 1
Taipei, Taiwan
T: +866.2.2705.4400
F: +866.2.2702.7460
[email protected]
www.fmclithium.com
1.888.lithium
LECTRO® LYTE 600 SALT
CAS No. 7447-41-8
FMC Product Code No. 672-01
Shipping Containers
125 lb. sealed in a 16.5-gallon fiber drum
Shipping Limitations
Shipments of lithium chloride are not classed as hazardous for transport.
Shipments by post, parcel, air, water, rail, or road are acceptable within each
carrier’s weight limits and packaging requirements.
For shipments within Europe labeling for supply requirements are:
Xn
Harmful
R&S phrases See Material Safety Data Sheet (MSDS)
®
Responsible Care initiative dictates that all shipments of lithium chemicals
must be transported in an approved vehicle in a responsible manner (i.e., no flat
bed trucks).
Lectro Battery Products
FMC provides a comprehensive line of products for battery applications
including additional Lectro Lyte Salts, Lectro Max Anode Materials, and lithium
precursors for producing critical battery materials. FMC possesses extensive
capabilities to develop and customize products and packaging to meet specific
customer requirements. FMC is ISO 9001:2008 certified.
For more information on these products, please call, or visit our website at
www.fmclithium.com. Let FMC Lithium fulfill your battery material needs.
1 FMC © © 2008 FMC Corporation. All rights reserved. The FMC and Lectro logos are registered trademarks of FMC Corp. The Responsible Care logo is a registered trademark of the American Chemistry Council.
The information contained herein is, to our knowledge, true and accurate. While this material is furnished in good faith, no warranty expressed or implied, of merchantability, completeness, fitness or otherwise is made. This material is offered
only for your consideration, investigation and verification, and FMC Corporation disclaims any liability incurred from the use thereof and shall not in any event, be liable for any special, incidental or consequential damages arising from such
use. This information is not intended to be all inclusive and the manner and conditions of use and handling of any material may involve other or additional considerations specific to the use or user. Nothing herein should be construed as
permission or recommendation to infringe any patent or as to any specific use. No agent, representative or employee of this company is authorized to vary any term of this notice.