Name:
)
Pinhole Camera Assignment
Creative Process Summative Evaluation
TASK
Each student will construct their own usable pinhole camera. Students will capture
and develop three (3) photos using their own pinhole camera and submit for
evaluation.
.
.
.
.
\
will
be evaluated on:
Understanding of Camera Mechanics (camera construction);
Application of the Creative Process (developed 3 photos);
Application of Tools (safety and use of equipment in dark room);
Application of the Elements and Principles of Photography (creativity).
Students
rffi
$
!4:
Lciel4
" 1&*r8.,
Camera Construction
Durable; Light Protected, Appropriate dimensions;
all mechanical components; Creativity.
Creative Process
Developed 3 photos independently; trimmed and
cropped; mounted and displayed.
Dark Room SafeW
Follows all rules and safety procedures without
reminders; respects equipment and space;
responsible.
ii
.s}ffii'
fi.r+ii j$i
Excellent
Good
Satisfactory
Poor
Excellent
Good
Satisfactory
Poor
Excellent
Good
Satisfactory
Poor
Excellent
Good
Satisfactory
Poor
Creativitv
Photos are interesting and appealing; Makes use of
compositional strategies, elements, camera angles
and distance. and subiect matter.
Teacher Comments:
t40
IVlarnvc A Bracr & Wrurr Pnnqr
Tnavs
@ 3000nu. E.q,cH
The paper that has been exposed is processed, first by immersion in a photographic developer, halting
development with a stop bath, and fixing in a photographic fixer. The print in then washed to remove the
processing chemicals and dried.
After you've exposed your paper under the enlarged negative:
f
.) TRAY
1: PapTnDEYELoPER
Rq,rIo: 1+9 =
ml Developer and
ml Water.
INsrRucuoxs: Agitate by flipping paper continuously for 1 minsfs.
2.) TRAY 2: Srop Baur
Rc,rro:
l+19=
ml Stop Bath and
ml Water.
flippingpap$ continuously for 30 seconds.
INSTRUCTIoNS: Agitate by
3.) TRAY 3: PaprnFucn
Ratto: l+3=
ml Fixer and
ml Water.
INsrRucrtoNs: Agitate by flippingpaps continuously for 2 minutes.
4.) TRAY4:'Wersn
Insffuctions: Agitate by flrpping paper continuously for 3-5 minutes. The longer you rinse, the better.
If all the chemicals are not rinsed properly from the print, they may start to fade over time. You may
choose to leave the print soak in the water for up to 10 minutes.
5.) Bring your print outside the Darkroom to dry with paper towel and evaluate.
What I found most difficult/Problems I encountered:
Next time I'll remember/Tips for myself: