ELECTRICAL INSULATION TAPES
3M 16 Crepe Paper Tape
3M 16 Crepe Paper Tape is a highly conformable tape that is typically used for coil cover and end-turn
taping applications. This tape combines good dielectric properties with outstanding conformability for easy
application around tight turns and bends. It is made from a single layer of crepe paper that is coated on
one side with a thermosetting rubber adhesive.
Features
 Crepe paper backing
allows outstanding
conformability
 105ºC operating
temperature
 Thermosetting adhesive
Properties
Backing
Adhesive
Total Thickness
Operating Temperature
Dielectric Breakdown
Insulation Resistance
Breaking Strength
Adhesion to Steel
Crepe Paper
Thermosetting Rubber
0.228mm (9 mil)
105ºC (221ºF)
2,500 volts
>1 x 106 MΩ
44 N / 10mm (25 lb./in)
5.5 N / 10mm (50 oz./in)
Availability
Associated Gaskets slits 3M 16 Crepe Paper Tape in-house and can provide this quality tape in whatever
width you require (standard widths are also listed below).
Standard roll widths: 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm
Standard roll length: 55mtrs.
3M is a trademark of 3M.
Visit: www.agaus.com.au
Phone: 1300 098 060
Important
This information should not be treated as a substitute for specific
technical advice. AG does not offer such advice and cannot warrant
the performance or suitability of products for particular applications.
Rev:
V000640
7017R01215AGDOCg