6 5/8” WirlTool®, Circulating Tool
Model WT 101
For cleaning 9 5/8” casing or small bore BOP, with NC 38 box x pin connection
Dimensional data
Max OD, inch
Min ID, inch
Fish neck OD, inch
Length, mm
Jet size diameter, mm
Number of jets
Material properties
Body material
Tensile Yield strength, lbs
Torosional Yield strength, ft-lbs
Operational data
Total jet flow area, sq.in
Connection
Max pump rate, lpm
Recommended washing rotation, rpm
Recommended RIH speed washing, m/min
Recommended POOH speed washing, m/min
Transport Data
Weight, kg
6,625
2,50
4,50
1245
12
8
AISI 4140
649 000
11 000
1,4
NC 38
2500
5
No limit
2
79
Updated electronic revision of this
document is filed at
http://www.innovar.no
Filplassering, dokument nr. og revisjon:
I:\A1_STYRENDE DOKUMENTASJON (Originalfiler)\Engineering Datasheets
(EDS)\WirlTool\EDS-058-02, WT 101 6,625 WirlTool.docx
Revisjonsdato:
01.12.2016
Dokument eier:
Operation Manager
Innovar Solutions AS Varabergmyra 18, 4051 Sola, Norway
E-mail: [email protected] Telephone: + 47 954 49 500 www.innovar.no
Godkjent av:
General Manager
Side
nr.: 1