Service MANOSKOP® torque wrench with quick adjustment − automatic triggering
O1
Cal
Version:
Function:
Application:
Sturdy compact one-armed torque wrench, adjustable to scale
and self-triggering. The accuracy is sustained for many thousands
of operations, because high quality material is used for all wear
parts with stressed parts only briefly loaded on each occasion.
Body and handle are of sturdy square section, handle covered
with a non-slip rubber grip; scales are adjustable.
Left-hand tightening by reversing the plug-in head.
If the set value is reached while using the wrench, the wrench
triggers giving a "signal" (audible and perceptible) and is then
immediately ready for use again.
For controlled tightening of screws etc. to a pre-set
torque. Since the set torque can be varied, it is ideal
for repairs and short series production.
QuickRelease:
Secure location and quick change-over of any plug-in head
with the QuickRelease safety locking.
The rectangular socket allows use of a wide variety of plug-in heads.
65 7090_100
With QuickSelect quick adjustment
65 7092_100
±3%
65 7094_100
Version:
65 7090 – With plug-in reversible ratchet.
65 7090 Size 800 – With plug-in ratchet with push-through square.
65 7092 – With square drive plug-in head.
65 7094 – Without any plug-in head (basic model);
see No. 657580 − 657950 for suitable plug-in heads.
Advantage:  Ergonomically shaped two-component handle,
resistant to aggressive liquids such as fuel, Skydrol etc.
 Adjustment scale behind a sight glass for protection
against dirt and damage.
 Quick, precise, and reliable setting: Pull the setting
knob, "Twist" to set the desired value and "Press"
to save it. Setting knob moves easily since there
is no spring pressure to be overcome.
20
50
100
130
200
400
650
800
63A
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
63A
XXX
XXX
XXX
XXX
XXX
XXX
XXX
—
63A
QuickSelect quick adjustment
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
2 − 20
−
20 − 180
293
0.2
0.74
3/8″
10 − 50
7 − 37
−
348
0.25
1.05
3/8″
9×12
20 − 100
15 − 75
−
404
0.5
1.21
1/2″
25 − 130
20 − 95
−
446
0.5
1.36
1/2″
Maximum torque
torque wrench with
65 7090 QuickSelect
reversible plug-in ratchet
torque wrench with
65 7092 QuickSelect
square drive plug-in head
wrench QuickSelect
65 7094 Torque
without plug-in head
Measuring range
Measuring range
Measuring range
Overall length including pitch
Scale graduation, 1 graduation =
Weight
Square drive (65 7090, 65 7092)
Socket for plug-in head
Nm
Nm
lbf.ft
lbf.in
mm
Nm
kg
inch
mm
40 − 200 80 − 400
30 − 150 60 − 300
−
−
492
632
1
2
1.49
1.89
1/2″
3/4″
14×18
130 − 650 160 − 800
100 − 480 120 − 600
−
−
915
1233
2.5
5
3.40
6.8
3/4″
3/4″
22×28
With quick adjustment
65 7100_100
±4%
65 7200_100
Version:
65 7100 – With plug-in reversible ratchet.
65 7200 – With square drive plug-in head.
65 7210 – Without any plug-in head (basic model);
see No. 657580 − 657950 for suitable plug-in heads.
Function:
Adjustment: Quick adjustment of the torque
with the slide setting button. The value is fixed
using the locking key in the handle.
20L
40L
50
100
130
200
400
650
63A
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
63A
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
63A
65 7210_100
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
4 − 20
−
196
0.5
0.32
3/8″
8 − 40
−
240
1
0.4
3/8″
6 − 50
5 − 36
333
2
0.8
3/8″
20 − 100
15 − 72.5
388
2.5
1.02
1/2″
25 − 130
20 − 95
435
2.5
1.1
1/2″
Maximum torque
wrench
65 7100 Torque
with reversible plug-in ratchet
wrench
65 7200 Torque
with square drive plug-in head
wrench
65 7210 Torque
without plug-in head
Measuring range
Measuring range
Overall length including pitch
Scale graduation, 1 graduation =
Weight
Square drive (65 7100, 65 7200)
Socket for plug-in head
Nm
Nm
lbf. ft
mm
Nm
kg
inch
mm
9×12
40 − 200 80 − 400
30 − 145 60 − 300
480
615
5
10
1.25
1.66
1/2″
3/4″
14×18
130 − 650
100 − 480
900
20
3.48
3/4″