Chemlok
®
Description
Features and Benefits
Chemlok® EP5081-40 is a fluorescing additive to be
used with the following clear Chemlok adhesives;
Chemlok AP131, Chemlok AP132, Chemlok AP133,
Chemlok AP134, Chemlok KP1001, Chemlok 607,
Chemlok 5150, Chemlok Y5323 and Chemlok
Y1520A. When added at 5% by weight, Chemlok
EP5081-40 fluorescing additive will impart
fluorescence to the dry film which can be seen under
an ultraviolet light source (i.e. a black light). Lab
results indicate that Chemlok EP5081-40 fluorescing
additive does not affect adhesion.
Easy to Use - blends into a variety of clear products.
Causes Fluorescence - adhesive coverage is
readily identifiable under a black light.
Maintains a Clear Appearance - additive does not
distort optical clarity of adhesive under normal
lighting.
Typical Properties* of Chemlok EP5081-40 Additive
Appearance
Clear Liquid
Non-volatile Content
by weight
8.5% - 11.5%
Density
kg/m3
lb/gal
796 - 833
6.65 - 6.95
Flash Point
Setaflash (closed cup)
11°C (52°F)
Solvent
Ethanol
Shelf Life
One year from date of shipment, unopened container,
21°C - 27°C (70°F - 80°F) storage temperature.
*Data is typical and not to be used for specification purposes.
product information
Chemlok® EP5081-40
Fluorescing Additive for Clear
Chemlok Adhesives
Application
The following approximate amounts of Chemlok
EP5081-40 fluorescing additive may be added to the
adhesive by slowly pouring the additive into the
adhesive while stirring.
Mixing Chemlok EP5081-40 Additive
by weight
by volume
3.78 L (1 Gallon)
190 grams (0.4 lbs)
240 mil (1/2 pint)
18.93L (5 Gallon)
772 grams (1.7 lbs)
0.95 liters (1 quart)
208.20L (55 Gallon)
8.6 kilograms (18.7 lbs)
10.4 liters (11 quarts)
Clean Up
Use alcohol, such as methyl alcohol or isopropyl
alcohol to clean up Chemlok EP5081-40 additive.
Values stated in this bulletin represent typical values as not all tests
are run on each lot of material produced. For formalized product
specifications for specific product end uses, contact the Customer
Service Department.
Information provided herein is based upon tests believed to be
reliable. Inasmuch as Lord Corporation has no control over the
manner in which others may use this information, it does not
guarantee the results to be obtained. In addition, Lord Corporation
does not guarantee the performance of the product or the results
obtained from the use of the product or this information where the
product has been repackaged by any third party including but not
limited to any product end user. Nor does the company make any
express or implied warranty of merchantability, or fitness for a
particular purpose concerning the effects or results of such use.
Chemlok is a registered trademark of Lord Techmark, Inc., a
subsidiary of Lord Corporation.
© Lord Corporation Printed in USA DS3154 (Rev.2 11/04)
Cautionary Information
Before using this or any Lord product, refer to the
Material Safety Data Sheet (MSDS) and label for
safe use and handling instructions.
For industrial/commercial use only. Must be applied
by trained personnel only. Not to be used in
household applications. Not for consumer use.
For additional information, contact Lord Corporation at:
1-800-Chemlok, write: Lord Corporation, 2000 West
Grandview Blvd., P.O. Box 10038, Erie, PA 16514-0038,
or by email: [email protected]