HiPace® 10 with TC 110 and
power supply OPS 40, DN 25
HiPace® 10 with TC 110 and power supply OPS 40, DN 25
Similar Image
The world's smallest series-production turbopump
A powerful, rugged turbopump with a pumping speed of 10 l/s for N2
DN 25 connection
Drive electronics TC 110 and power supply OPS 040 integrated
Mobile usable
Requires no additional cooling
Electronic connection in direction of fore-vacuum connection
Dimensions
www.pfeiffer-vacuum.com
Page 2
Technical Data
HiPace® 10 with TC 110 and power supply
OPS 40, DN 25
Bearing
Compression ratio for Ar
Compression ratio for H2
Compression ratio for He
Compression ratio for N2
Cooling method, standard
Electronic drive unit
Flange (in)
Flange (out)
Fore-vacuum max. for N2
Gas throughput at full rotational speed for Ar
Gas throughput at full rotational speed for H2
Gas throughput at full rotational speed for He
Gas throughput at full rotational speed for N2
Integrated power supply
Interfaces
Mounting orientation
Operating voltage
Particulate matter
Permissible magnetic field max.
Protection category
Pumping speed for Ar
Pumping speed for H2
Pumping speed for He
Pumping speed for N2
Rotation speed ± 2 %
Rotation speed variable
Run-up time
Ultimate pressure according to PNEUROP
Hybrid
2.5 · 108
3 · 102
3 · 103
3 · 106
Convection
with TC 110
DN 25
DN 16 ISO-KF / G 1/8"
25 hPa | 18.75 Torr | 25 mbar
0.37 hPa l/s | 0.28 Torr l/s | 0.37 mbar l/s
2.78 hPa l/s | 2.08 Torr l/s | 2.78 mbar l/s
0.48 hPa l/s | 0.36 Torr l/s | 0.48 mbar l/s
0.37 hPa l/s | 0.28 Torr l/s | 0.37 mbar l/s
YES
RS-485, Remote
in any orientation
24 (± 5 %) V DC
YES
3 mT
IP30
11.5 l/s
3.7 l/s
6 l/s
10 l/s
90,000 rpm | 90,000 min-1
50 - 100 %
0.9 min
< 5 · 10-5 hPa | < 3.75 · 10-5 Torr |
< 5 · 10-5 mbar
2 kg | 4.41 lb
Weight
Order number
HiPace® 10
www.pfeiffer-vacuum.com
PM P03 963
Page 3
Accessories
Accessories Diaphragm pumps
Connection adapter for backing pump
Connection cable TPS 180 - MVP 006-4 with
HiPace 80/HiPace 10, 2 x 0.5 m
Accessory for DCU/HPU
Accessories package for HPU 001/PC
RJ 45 interface cable on M12 for HiPace
Adapter and control cables
Control cable for valve
HiPace - ACP connection cable
Adapters/connections TC 110
TCS 11, adapter for TC 110/120 with RS-485
interface
TCS 12, adapter for TC 110/120 with interface
RS-485, 4 accessory ports and coupling set
Centering ring
Centering ring, FPM/Aluminum, DN 25 ISO-KF
Centering ring with integrated fine sieve
Centering ring with integrated mesh screen, DN
25 ISO-KF
Control and display units
DCU 002, Display Control Unit
Fore-vacuum safety valves
TVV 001 fore-vacuum safety valve, 115 V AC
TVV 001 fore-vacuum safety valve, 230 V AC
Interface cables
Interface cable, M12 m straight/ M12 m angled
0.7 m
Interface cable, M12 m straight/M12 m straight,
3m
Mains cables
Mains cable 115 V AC, NEMA 1-15 to C7, 1.8 m
Mains cable 230 V AC, XVI EN 50075 to C7,
1.5 m
Mounting kit for HiPace, connection adapter,
hexagon screws
Connection adapter DN 25 ISO-KF
Mounting kit for HiPace, including centering
ring and claws
Mounting kit for HiPace 10, DN 25 ISO-KF,
including centering ring with claws
Mounting kit for HiPace 10, DN 25 ISO-K,
claws
Mounting kit for HiPace 10, DN 25 ISO-K and
claws
Pressure Sensors
IKT 010, Digital Cold Cathode Sensor, low
current
IKT 011, Digital Cold Cathode Sensor, high
current
RPT 010, Digital Piezo/Pirani Sensor
TIC 010, Adapter for two sensors
Relay boxes suitable for TC 110, TC 400 and
TCP 350
Relay box for backing pump, single phase 20 A
for TC 110/120 and TCP 350, M8 plug
www.pfeiffer-vacuum.com
PM 016 525 -T
PM 061 399 -T
PM 061 005 -T
PM 051 726 -T
PM 061 687 -T
PM 071 142 -X
PM 061 636 -U
PM 061 638 -U
PF 110 125 -T
PF 113 225 -T
PM 061 348 -T
PM Z01 206
PM Z01 205
PM 061 791 -T
PM 061 283 -T
P 4564 309 OB
P 4564 309 OA
PM 093 315 -T
PM 016 627 -T
PF 104 000 -T
PT R72 100
PT R73 100
PT R71 100
PT R70 000
PM 061 373 -T
Page 4
Accessories
RS-485 accessories
Connector M12 to RS-485
Power separator for RS-485
Termination resistor for RS-485
USB converter to RS-485 interface
Y-Connector M12 to RS-485
Shielded relay boxes suitable for TC 110/TC
400 with PB, TC 1200 and TM 700
Relay box, shielded, for backing pumps, 1phase 7A for TC 110/120 and TCP 350, plug
M8
www.pfeiffer-vacuum.com
PM 061 270 -X
PT 348 132 -T
PT 348 105 -T
PM 061 207 -T
P 4723 010
PM 071 282 -X
Page 5
Vacuum solutions from a single source
Pfeiffer Vacuum stands for innovative and custom vacuum solutions worldwide,
technological perfection, competent advice and reliable service.
Complete range of products
From a single component to complex systems:
We are the only supplier of vacuum technology that provides a complete product portfolio.
Competence in theory and practice
Are you looking for a
perfect vacuum solution?
Please contact us:
www.pfeiffer-vacuum.com
Pfeiffer Vacuum GmbH
Headquarters · Germany
T +49 6441 802-0
[email protected]
All data subject to change without prior notice.
Benefit from our know-how and our portfolio of training opportunities!
We support you with your plant layout and provide first-class on-site service worldwide.