All Purpose Cleaner
Antibacterial Cleaner
_______________________________________________________________________________
Kitchens
Microwaves
Worktops
Stainless Steel
Painted Areas
Tiles & Grout
Cooker Tops
Oven Degreasing
Sachets EasyClean is a state of the art break through in cleaning
solutions for the home, automotive, industries, aviation and
marine. Sachets EasyClean is a grease busting, stain neutralizing,
cost effective all purpose cleaner. Simply mix with water, spray
on any surface and you will be astonished how effective
Sachets EasyClean cuts through the toughest tasks. It was
developed to provide a whole new healthy all round cleaning
solution for our homes and place of work.
Mixing Options with Sachets EasyClean
For general cleaning, mix one sachet of Sachets EasyClean into a
750ml or 1 litre trigger spray bottle, fill with water and shake well. If
you often encounter challenging clean-ups, go with the 750ml dilution.
If most of your cleaning is light, use the 1 litre dilution.
Window Washing
Mix one sachet to 3 litres of water.
Industrial Floor Machines
Mix one sachet to 5 litres of water.
Carpet & Scrub Cleaning Machines
Mix one sachet to 5 litres of water.
Windshield Wiper Fluid
Mix 1 sachet to 1 litres of water.
Bathrooms
Baths & Showers
Glass & Mirrors
Soap Build-up
Lime scale
Tiles & Grout
Carpets & Rugs
Mould & mildew
General Cleaning
Vanished Woods
Plastic Furniture
Plastic Appliances
Nicotine remover
Graffiti Remover
Upholstery
Leather Cleaner
Stain Remover
Car & Caravan Care
Car Washing
Oxidation Remover
Tar & Bug Cleaner
Alloy Wheels
Interior Detailing
Paint Over sprays
Engine Wash
Fiberglass
Rubber marks
Rust bleeds
And Much More
UNITS 6/7/8 BOARSHURST BUSINESS PARK, GREENFIELD, OLDHAM• OL3 7ER
PHONE: 01457 820067 • FAX: 01457 820332
General Surface Cleaning
Spray the surface to be cleaned thoroughly, let penetrate for ten seconds and wipe clean. If
it's a vertical surface, such as a wall, be sure to spray from the bottom up, placing your cloth
at the bottom as you spray, to catch drip lines.
White terry cloth squares (12") work best for general cleaning on hard surfaces, as well as
cloth carpet, and upholstery. Sponges are better for porous, pitted, or irregular surfaces.
Several sizes (and stiffness) of nylon brushes are helpful when more agitation is required,
and are normally safe for use on scratchable surfaces (test first). A small nylon brush is
helpful for cloth, upholstery, and carpet. Scotchbrites are effective for heavy build-up of
grease or carbon (as with engines or ovens) but may scratch softer surfaces (test first).
Light gauge steel wool works very well for tough clean-ups on surfaces that are either
impregnable or not damaged by fine abrasion. Cleanups on concrete will require a wire
brush, copper preferred. For more challenging surface clean-ups, spray thoroughly, wait 30
seconds to several minutes, then agitate with cloth, sponge, Scotchbrites, brush, or steel
wool, as indicated above. When agitating,
it's best to work in a circular motion, both clockwise and counter clockwise.
If it's a really tough surface clean-up, spray thoroughly, then lay a cloth or
paper towel over the area and spray that as well to assure that the surface will be kept moist
for a longer wait period of 30 minutes or more. It may be
necessary to come back periodically and re-spray. The longer you allow Morris Powder to
penetrate, the easier the cleanup will be. If necessary, soak
overnight, having also sprayed a terry cloth square or towel over the surface to
assure it stays moist. A longer wait time may turn a half hour of scrubbing with a brush into
a simple wipe off with a cloth.
Limescale on sink fixtures- Spray thoroughly and let penetrate for several minutes. Agitate
with scotchbrite or nylon brush. Rinse with water. If stubborn, wrap the fixture with a cloth
and spray the cloth thoroughly. Agitate with brush or scotchbrite after allowing a longer
penetration time. Rinse with water and wipe clean.
Carbonized Cookware - For steel or aluminium pans that are heavily carbonized on the
outside, prepare a "dipping tank" of solution with one sachet per litre of water. Leave the
pan to soak in dip tank overnight. Agitate with the appropriate tool in the morning and wipe
clean.
Restaurant Grease Filters - Use the same dipping tank concentration as above (one
sachet per litre of water) and soak grease-trap filter for 12 hours before agitating with non
scratch brush and rinsing under running water.
Window Washing - Mix one sachet to 3 litres of water. Spray windows sparingly, wipe and
polish with old newspaper or dry cloth. (Warning. Using the product too strong will leave
streaks on your windows. For heavy build-up on glass such as nicotine several
applications maybe required)
UNITS 6/7/8 BOARSHURST BUSINESS PARK, GREENFIELD, OLDHAM• OL3 7ER
PHONE: 01457 820067 • FAX: 01457 820332
Aircraft - Morris Powder is an excellent cleaner/degreaser for removing hydraulic fluid
leakage on surfaces, and the same applies for the automotive and industrial sector.
Simply follow the directions above for surface cleaning.
Carpet Stains - The ability to take out a carpet stain depends on age, heat exposure,
whether or not it has already been "cleaned in," or bleached. Spray the area thoroughly and
let penetrate for one to two minutes, agitate with a cloth or small brush from the outside in.
Spray a second time and repeat. Now "pick up" the stain by rinsing with a wet white cloth in
a circular motion, working, once again, from the outside in. Wipe dry with a towel. Cover
the area with a dry cloth after cleaning until it dries.
Carpet Shampooing Machines - Vacuum the area to be cleaned. Pre-spray all
heavily soiled areas and stains. Mix one sachet to five litres of water. Clean carpet,
concentrating on heavily soiled areas. Let carpet dry thoroughly and vacuum.
Deep Fat Fryers - Fill with water to above the oil level. Add one sachet per litres to one and
a half litres of water. Heat and boil for 10 minutes. This will clean both the vessel and the
element. Let cool, rinse with clean water and dry before replenishing oil.
Nicotine Stains on Walls - If you do not remove nicotine stains before painting, they may
bleed through the new paint coat. Working areas of about 4' x 6', spray the wall from
bottom up, agitating with a sponge in a circular motion. Re-spray and wipe with a cloth.
Rinse by wiping with a damp towel.
Oxidation - Old paint becomes "chalky" is it is oxidized. If you're cleaning something that's
quite old, or has been out in the sun for a while, don't be alarmed if it seems that some of
the "colour" is coming off on your rag. What's happening is that you are
removing the oxidized portion of the paint coat. You'll also notice that the paint is brighter
and more colourful. You may wish to protect that paint with a wax coat after cleaning.
Upholstered Chairs - Test fabric for colour-fastness or bleeding before cleaning.
Pre-spot any stains or heavily soiled areas, then spray the upholstered area, let penetrate for
one to two minutes--no more, then agitate as appropriate with cloth or soft bristled brush,
wipe with a damp cloth, then dry with a white towel.
Stainless steel - Clean surfaces as described above. After cleaning stainless steel
surfaces, always polish the surface afterwards with a damp cloth thus removing any
residue left from the cleaning process.
Dishwasher – For deep cleaning. Spray interior, including seals, which often are subject to
mildew. Let penetrate for several minutes, then wipe down seals. Re-spray inside, and run
dishwasher on short cycle to clean.
Stains on Concrete - Spray thoroughly the area to be cleaned. Empty a sachet of
powder directly over the stain and work into the surface with a wire brush. Let penetrate for
five to ten minutes, agitate with wire brush and rinse clean with water.
Glues & Tape Residue - Many tape residues clean up very well with Morris’s Powder while
some, such as that of super glue & duct tape, will require a more aggressive
solvent. Scrape any tape that is amenable to scraping. Spray the remainder thoroughly, let
penetrate for several minutes, agitate as appropriate with brush or scotchbrite and wipe
clean. If stubborn, lay a paper towel over the residue and spray that thoroughly. Let sit for
several minutes to several hours, agitate with the appropriate tool and wipe clean.
UNITS 6/7/8 BOARSHURST BUSINESS PARK, GREENFIELD, OLDHAM• OL3 7ER
PHONE: 01457 820067 • FAX: 01457 820332
Pet Stains on Carpet – Morris Powder is excellent at neutralizing odours. Spray the stained
area thoroughly. Let penetrate for up to two minutes, then agitate with nylon brush. Wipe
with a wet cloth to "lift" stain, then dry with a white towel. Cover the cleaned area until dry.
This will stop re-staining.
Floors - Spray floors thoroughly, concentrating on heavily trafficked and stained areas. Let
penetrate for five to ten minutes, then mop with clean hot water. Replace water frequently.
Mould & Mildew - Spray the area thoroughly. Agitate with a soft bristled nylon brush and
rinse with water. Repeat until clean.
Ovens - Spray thoroughly and allow to penetrate grease build-up for ten to fifteen minutes,
re-spraying as necessary to keep damp. Agitate the area with scotchbrite, or non-scratch
stainless wool on tougher areas, and wipe clean. Once cleaned, spray cloth thoroughly and
wipe down oven with This will make it much easier to clean the next time.
Grills & Grates - Prepare a dip tank, with one sachet per one to one and a half litres of
water. Soak grill or grate overnight and clean with hard bristled brush or scotchbrite. Once
clean, wipe it down with mixed solution and the next clean will be much easier.
Jewellery & Watch Bands - Morris Powder is safe for fine jewellery, with one exception:
Do not use Morris Powder with pearls. Mix one sachet in a one litre glass or bowl of warm
water. Place jewellery in the solution for one to two minutes. Do not immerse non
waterproof watches, but hold the movement in such a manner that the band is in the
solution. Use a small toothbrush to agitate within the crevices, rinse in a second glass
or bowl of clean water, and wipe clean.
Laundry Pre-spotting - Stains such as red wine, soda, coffee, grass, rust, etc. respond
very well to Morris Powder. Check fabric first for colour fastness. Spray the stained area
thoroughly, agitate by rubbing the cloth against itself or with a soft bristled brush. Let
penetrate for at least two minutes before placing in wash water, and washing normally.
Tile Grout - Spray grout area thoroughly and let penetrate for several minutes. Agitate with
a soft bristled nylon brush, and rinse with cold running water. Repeat until clean.
Cars, Boats, RVs, etc. - Mix one sachet to a five litre bucket of warm water. Wet the
paintwork thoroughly with the hose. Using a sponge, wash the paintwork with circular
motions, rinsing the sponge in the bucket frequently. Rinse off with clean water before
paintwork dries, and dry with a chamois or towel. Morris’s Powder is excellent at
removing oxidized paint, leaving a cleaner, brighter finish.
Alloy Wheels & Tires - Spray the tires and rims thoroughly. Agitate with a damp cloth on
surfaces and a soft bristled nylon brush in crevices. Rinse with clean water and wipe dry.
Then re-spray the rims and polish with a clean white cloth; re-spray the tires and wipe dry
with a cloth. For whitewalls use a soft brush or sponge.
Car, Boat, & RV Interiors - Spray the area to be cleaned. Using a damp cloth or sponge,
wipe the area in a circular motion. Rinse the cloth or sponge in clean water, wring out and
re-wipe the area. Now buff dry with a clean cloth or towel.
Stripping Wax from Floors - Spray thoroughly the area to be stripped, let penetrate
for several minutes and mop with hot water. ( For scrub machines empty one sachet
into 5 litres of water)
UNITS 6/7/8 BOARSHURST BUSINESS PARK, GREENFIELD, OLDHAM• OL3 7ER
PHONE: 01457 820067 • FAX: 01457 820332