The Acoustical Testing Center

The Acoustical Testing Center
Where Quiet Counts
The Acoustical Testing Center (ATC) at the Fridley plant of Cummins Power Generation is the
largest engine-testing facility of its kind in the world. This innovative building provides several
significant advantages:
Its state-of-the-art hemispherical anechoic (no echo) chamber
eliminates external noise interference or input.
We can now measure precisely the noise output from fully
assembled generator sets of all types and sizes.
Pinpointing the sources of noise in a generator set helps
us design quieter, “greener” products.
The ATC reduces the environmental impact on the surrounding
neighborhood by eliminating the need for outdoor testing.
CPG110051_ATC_GO_Flyer 1
10/3/11 1:32 PM
FLYER
JOB # CPG110051
DATE 10.3.11
CLIENT Cummins Power Generation
NAME ATC Event Flyer
2
TRIM
8.5" x 11"
BLEED .125"
FOLDED
FILE CREATED AT:
COLOR CMYK
C
M
Y
K
INITIALS
CD
AD/DS
CW
AM
PM Kristine G.
STAGE: FINAL
DATE
Key Facts
23,000 square feet of total building area
• ~ 13,000 square feet of hemi-anechoic test area
• ~ 5,000 square feet of build area
Fully capable of testing generator sets up to 3.3 MW and of all fuel types
(gasoline, diesel, JP8, natural gas, propane)
• Meets all current and applicable testing standards: ISO 3744, 3745, 6798, 8528-10
• Facilitates year-round 24/7 testing for increased productivity
Curved hemispherical roof: the preferred acoustical design
Chamber acoustical material: 50 Hz Metadyne® LF Wedge sized at 4' x 4' x 4'9"
Air-handling units: capable of moving 222,500 CFM of air through test cell
Architecture sets standard for future expansion
Constructed following LEED guidelines for green building design
Ensures sounds from building are well below property-line noise requirements
Basic right-first-time infrastructure will be able to handle generator sets
up to 4.4 MW in the future and accommodate building expansion
Key Dates
September 2010: Construction started
December 2010: Steel erection
April 2011: Building enclosed
September 2011: Construction completed
October 2011: Grand opening
©2011 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation, Cummins and the “C” logo are registered
trademarks of Cummins Inc. “Our energy working for you™” is a trademark of Cummins Power Generation. F-2351 (10/11)
CPG110051_ATC_GO_Flyer 2
10/3/11 1:32 PM