Hydro-MAXX T
Hydrophilic PTFE for Fine Chemical/Semiconductor/Electronics
▪ Fine/High Purity Chemicals
▪ Low temperature Resist Strippers
(without peroxide)
▪ KOH and TMAH based developers
▪ Dilute Acids
▪ Dilute Bases
The Hydro-MAXX-T is a nanometer rated filter cartridge for the filtration of fine
chemicals, developers, strippers, etc. in the semiconductor/electronics industry.
Hydro-MAXX-T filters are made of a patented hydrophilic (PTFE) membrane
filter media that requires no prewetting or flushing for operation in aqueous
solutions. The media also delivers quick rinse up times, excellent flow/retention
characteristics and does not de-wet.
The high area (11ft.2/10” cartridge) provides low flux rates across the media
ensuring a high level of particle retention of small particles without sacrificing flow.
The filter cartridge is rigorously flushed with Ultra Pure Water (UPW) and cleaned
in the manufacturing process to meet the needs and demands of today’s Fine
Chemical and Semiconductor industries.
Features & Benefits
Hydro-MAXX T
• Large surface area: Enables high flow rates while maintaining
excellent ultrafine particle retention. Provides longer filter life.
• High Density Polyethylene or Polypropylene hardware and support
media: High purity materials with excellent cleanliness, rugged
construction and a wide range of chemical compatibility..
• Patented hydrophilic PTFE membrane: Eliminates prewetting in
aqueous solutions. Does not de-wet in outgassing fluids.
• Nanometer rated retention: Availiable in retention ratings of 20 nm,
30 nm, 50 nm and 100 nm, delivering the broad scope of ultrafine
small particle retention for today’s electronics industry.
Performance Characteristics
12
12
20nm
8
30nm
6
4
2
0
0.5
1
1.5
2
2.5
Water Flow Rate (gpm)
3
10
Differential Pressure (PSID)
Differential Pressure (PSID)
10
8
6
50nm
4
100nm
2
0
0.5
1
1.5
2
2.5
3
Water Flow Rate (gpm)
The Strainrite Companies
Materials of Construction
Retention Rating (nanometers)
20, 30, 50, 100
Filter Media
Hydrophilic PTFE
Maximum Differential Pressure
Forward: 50 psid (3.5 bar) @ 68°F (20°C)
Reverse: 35 psid (2.5 bar) @ 68°F (20°C)
End Caps
Ultra Pure HDPE, Polypropylene
Pleat Support Material
Ultra Pure HDPE, Polypropylene
Maximum Operating Temperature
180°F (82°C) Polypropylene
160°F (71°C) Ultra Pure HDPE
Cage/Core
Ultra Pure HDPE, Polypropylene
Packaging Economy
Bulk packaging in case quantities
to reduce material disposal:
5 inch
10 inch
20 inch
30 inch
40 inch
Specialty
Specifications
Seals
Fluorocarbon
EPDM
Silicone
PTFE
FEP Encapsulated Silicone
FEP Encapsulated Fluorocarbon
48 per carton
24 per carton
12 per carton
12 per carton
9 per carton
Sealing
Thermal Bond
Dimensions
Hydro-MAXX T
Outside Diameter
2.7” (6.87cm)
Approx. Surface Area
11ft2 per 10” equivalent
Lengths
5” (12.7cm)
10” (25.4cm)
20” (50.8cm)
30” (76.2cm)
40” (102cm)
Ordering Information
Hydro-MAXX T
HDMXT
Nanometers
20
30
50
100
www.strainrite.com | 800-487-3136
Code | Lengths
5
10
20
30
40
5"
10"
20"
30"
40"
Code | Pleat Support
HD
PP
Ultra Pure HDPE
Polypropylene
Code | End Cap Configuration
C3
C6
C7
C8
Flat/222
Flat/226
Fin/226
Fin/222
Code | Gasket/O-ring Material
S
V
E
T
TV
TS
Silicone
Fluorocarbon
EPDM
Teflon/PTFE
Encapsulated Fluorocarbon
Encapsulated Silicone
Rev. 03.2017