INSULATORS
INSULATORS
NEW
Improved 23613 Dead End/Suspension Insulator
Salisbury’s Improved 23613 Dead End/Suspension Insulator has
aluminum end fittings. These new end fittings create a lightweight
product that is easier to handle and provides a 15,000 pound ultimate
tensile strength. The new aluminum end fittings withstands corrosion
better than the previous galvanized steel SI series insulators, adding
to the life of the insulator. 100% proof testing ensures trouble-free
installation.
The insulator was tested in accordance with ANSI C29 and IEC1109.
See page J-4 for more information.
L-2
Insulators.
www.salisburybyhoneywell.com
SALVAR® & Silicone Insulators
SALVAR® & Silicone Composite Insulators combine
the technologies of fiberglass reinforced rod, metal fittings
and our extensive knowledge of elastomeric insulation to
produce a high quality composite insulator. Since 1980
thousands of SALVAR® and Silicone Insulators have been
installed by utilities worldwide in a variety of environments.
Continued outstanding performance is proof of their
superior quality and design.
Design: Two designs are used to manufacture SALVAR®
and Silicone Insulators: Unibody and Modular. Unibody
Design insulators are one-piece injection molded directly to
the rod and sealed to the end fittings with a bead of silicone
to give the insulator high dielectric strength and protect it
from all environmental conditions. This design is used for
standard distribution dead end/suspension insulators.
Fiberglass Rod: A high quality fiberglass reinforced rod
is the core of every insulator with ultimate mechanical
strength at least twice the maximum working load.
End Fittings: Standard distribution dead/end suspension
units are supplied with clevis and tongue fittings meeting
ANSI C29-2 specifications. Ball, socket, and eye fittings
are also available. All are made of hot dipped galvanized
high strength carbon steel and have an ultimate tensile
strength rating of 15,000 pounds. All end fittings on dead/
end suspension insulators are attached by compression.
Every insulator is proof tested to verify the crimp.
Unibody insulators have end fittings sealed with silicone to eliminate any possibility of moisture
or contamination from reaching the fiberglass rod.
101 E. Crossroads Pkwy., Ste. A Bolingbrook, IL 60440 toll free ph (USA):877.406.4501 toll free fax (USA):866.824.4922 ph:630.343.3800
L-3
SI Series Silicone Insulator & New Aluminum Option
15kV to 35kV
Dead End/Suspension, Tongue & Clevis
The SI Series of Silicone Insulators features
a silicone formulation weathershed material.
Salisbury combined the excellent hydrophobic
and electrical qualities of silicone with an
optimum weathershed design and corrosion
resistant fiberglass rod to produce a state-of-theart insulator which meets or exceeds industry
requirements. The insulators were tested in
accordance with ANSI C29 and IEC1109. End
fittings are hot dipped galvanized high strength
carbon steel, providing a 15,000 pound ultimate
tensile strength. 100% proof testing ensures
trouble-free installation.
RUS Accepted.
Unibody insulators have end
fittings sealed with silicone to
eliminate any possibility of
moisture or contamination from
reaching the fiberglass rod.
NEW
Salisbury’s Improved 23613 Dead End/
Suspension Insulator has aluminum end fittings.
These new end fittings create a lightweight
product that is easier to handle and provides
a 15,000 pound ultimate tensile strength. The
new aluminum end fittings withstands corrosion
better than the previous galvanized steel SI series
insulators, adding to the life of the insulator. 100%
proof testing ensures trouble-free installation. This
insulator includes the same silicone weathershed
material as th SI Series.
23613
The insulator was tested in accordance with
ANSI C29 and IEC1109.
Class
No. of Weathersheds
Length-in ( m )
Dia. of Weathersheds-in ( mm )
Leakage Distance-in ( m )
Dry Arc Distance-in ( m )
L-4
9501U-SI
9502U-SI
23613
9503U-SI
DS-15
4
13.5 ( .34 )
3.8 ( 97 )
17.1 ( .44 )
8.4 ( .22 )
DS-28
6
17.5 ( .45 )
3.8 ( 97 )
26( .66 )
12.13 ( .31 )
DS-28
6
17.5 ( .45 )
3.8 ( 97 )
26( .66 )
12.13 ( .31 )
DS-35
8
21.3 ( .54 )
3.8 ( 97 )
35.1 ( .89 )
16 ( .41 )
Flash Over Voltage
Critical Impulse, Pos
Critical Impulse, Neg
Dry, 60 Hz
Wet, 60Hz
173
250
97
67
217
310
145
115
217
310
145
115
258
340
168
137
Radio Influence
Test, kV Ground
Max RIV-1000kHz µV
15
1
25
1
25
1
25
1uV
Ultimate Strength lbs.
FRP Rod Dia.-in ( mm )
15,000
.73 ( 18.63 )
15,000
.73 ( 18.63 )
Typ. Appl-kV, Ø-Ø
Net Weight ea.-lbs. ( kgs )
15
2.6 ( 1.20 )
27
3.1 ( 1.39 )
Insulators.
15,000
15,000
.73 ( 18.63 ) .73 ( 18.63 )
27
2.2 ( .99 )
35
3.5 ( 1.57 )
www.salisburybyhoneywell.com
The 9502L-EP Silicone Insulator
27kV
The 9502L-EP Silicone Insulator combines
two essential characteristics:
PERFORMANCE - The 9502L-EP is the
only composite insulator manufactured as a
replacement for two 10” (254mm) porcelain
disks. Installation is limited to horizontal
dead-end applications only.
INNOVATION - Unlike any other insulator
on the market, the unique shed design
of the 9502L-EP minimizes the material
content without compromising electrical or
dimensional requirements.
End fittings are hot dipped galvanized high
strength carbon steel.
Must be used as a dead end insulator only.
RUS Accepted.
No. of Weathersheds
Length-in ( m )
Dia. of Weathersheds-in ( mm )
Leakage Distance-in ( m )
Electrical
Critical Impulse
Ratings
Dry, 60 Hz
kV
Wet, 60 Hz
Radio
Test--kV Ground
Influence
Max RIV--1000Hz µV
Typ. Appl--kV, Ø-Ø
Ultimate Strength-SML- lbs / kN
Net Weight ea.-lbs ( kgs )
9502L-EP
5
11.5 (. 29 )
5 ( 127 )
22 ( .56 )
189
116
92
20
1
27
15000 / 70
2.8 ( 1.3 )
101 E. Crossroads Pkwy., Ste. A Bolingbrook, IL 60440 toll free ph (USA):877.406.4501 toll free fax (USA):866.824.4922 ph:630.343.3800
L-5