MIX COFFEE TABLE
HARDWARE
4 - hex
nuts
4 - flat
washers
4 - threaded rods
10 - bumpers
Missing hardware? Please call 800.606.6387 for replacements.
COMPONENTS
1 - glass top
4 - caps
Thank you for purchasing the Mix Coffee Table. This page
lists all the contents included in the box. Please take time to
identify the hardware as well as the individual components
of this product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to protect
them from damage.
ASSEMBLY
2 - side frames
1 - top frame
TOOLS REQUIRED
socket wrench (included)
C
B
socket
wrench
A
bumper
B
A
1 A) Place top frame upside down on a clean, padded surface.
Insert 4 threaded rods into top frame as shown. Turn rods
clockwise to secure.
B) Fit legs of 1 side frame over corresponding rods, and secure
with 2 hex nuts and 2 flat washers, using a socket wrench.
Using your fingers, align edge of each leg with edge of top
frame. Repeat step 1B for remaining side frame.
C) Insert 1 cap into bottom of each leg as shown. Press firmly
to secure.
Made in China - r08
B
glass
top
2 A) Position unit upright. Adhere 6 bumpers corners of frame
assembly as shown.
B) Carefully lay glass top onto frame assembly as shown.
Make sure each glass top is securely supported by each
bumper.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 1 of 1