Products & Applications
TECHNICal
tools
optibelt TT 3
optibelt TT mini
optibelt laser pointer II
optibelt Service-Box
Drive solutions with Optibelt
optibelt TT 3
Frequency tester
for the measurement
of tension
of V-belt drives,
timing belts
and ribbed belts
Special advantages
• Optibelt database classification by product groups
• Quick and easy determination of the belt tensioning
The Optibelt TT3
Technical data
­frequency tension tester Range of measurement 10-600 Hz
allows you to optimise Measuring accuracy < 100 Hz: 0.1 Hz your drive’s efficiency
> 100 Hz: 1.0 Hz
Input values and service life. This
Belt span length ≤ 10 000 mm Belt weight
< 10 000 g/m further development
Static belt tension 1-60 000 N
Sensor of the frequency
acoustic, with electronic suppression of interfering noise
­measuring technique
Display allows specific drive
LCD, 2 lines of 16 characters each
Power supply – optional – details to be entered
Batteries
2 x 1.5 V mignon cells (AA) and calculates the
Mains adaptor 2.4 V, 1000 mAh
Temperature range ­optimum frequency
+5 °C to +70 °C
in Hertz [Hz].
Dimensions 205 x 95 x 40 mm (without sensor)
Weight 230 g (not including batteries/mains adaptor)
• Non-contact measuring with repeatable accuracy
• Large measuring range from 10-600 Hz
• Display in Hertz [Hz] or Newton [N]
• High accuracy of measurement
• Adjustment with Optibelt tension
­recommendations
• Quality evaluation of the measuring results
• Storage of own data sets possible
• Simple operation
• Universal measuring head for comfortable measuring
• Data communication via PC including software
Areas
of application
•General mechanical engineering
•Utility vehicle/automobile industry
•Agricultural machine engineering
•Household appliances and office equipment
optibelt Technical Tools
optibelt TT mini
The new compact
frequency tension tester –
the guarantor of a long service life
of your V-belts,
ribbed belts
and timing belts
The Optibelt TT mini frequency tension tester is used to check the tension of drive belts by measuring their frequency of vibration. Due to its compact design, it offers universal application possibilities for drives in engineering, in the car industry and for many other technical applications.
Even in places that are diffi cult to access, the TT mini can be used so that the V-belts, ribbed belts and timing belts can be checked for their tension values simply and quickly.
In addition, the Optibelt TT mini offers further advantages:
• indication in Hertz [Hz]
• large measuring range from 10-600 Hz
• simple measuring with repeatable accuracy
• small, compact design (the size of a mobile phone)
• automatic switch-off function • exact works calibration and CE certifi cation
optibelt TT mini s
with fl exible goose neck
for trouble-free measuring at spots that are especially diffi cult to access
optibelt Technical Tools
optibelt laser pointer II
An indispensable aid for belt drives
Special advantages
1. Easy application for belt drives
2. Laser power < 5 mW
3. Exactly aligned line
­projection
The Optibelt laser pointer
­facilitates the alignment of belt drives. This device assists in identifying
the three most frequent causes for drive failures:
• the axial offset of the pulleys
• the horizontal
­angular deviation
• the vertical angular deviation
The belt pulleys are
aligned to each other via the front and/or the
lateral surfaces.
This professional handling
will improve the operation
of the belt and prolong its service life considerably.
The
user-friendly
­Optibelt
laser pointer II
is a device
of proven value,
especially
for ­everyday
­usage.
4. Measurements of parallel and angular
­misalignment
5. Higher operational safety of the drives
6. Time-saving and exact
measuring method
7. User-friendly application
Technical data
Laser: Class ll M EN 60825-1
Output
< 5 mW power:
Wavelength 635 nm of the laser:
Measuring < 0.5 mrad accuracy: level parallelity to the magnetic surface
Housing:
Brass, zinc coated
Power
1.5 V AA supply:
battery cell
CE approved
FDA certified
optibelt Technical Tools
optibelt Service-Box
… for fast help on site!
V-belt and pulley groove gauges. The pulley groove fl anks of V-grooved pulleys can be checked for angular deviation and wear. Where necessary, marks may be made on the belts such as measurements, reference marks etc. which are clearly readable using the special ballpoint pen with silver ink.
The inaccurate thumb method for setting belt tension is made redundant thanks to the Optikrik belt tension gauge.
The application and control of the belt tension with the Optikrik facilitates the maintenance work of the fi tter and increases the effi ciency and longevity of the drive.
4 pieces Optikrik gauges, Types 0, I, II, III
1 set of V-belt and pulley groove gauges
1 set of ribbed belt groove gauges
1 measuring tape, 3 m
1 ballpoint pen with silver ink, packed in a sturdy plastic box
Co
py
rig
ht
Contents
All in all a valuable
“aid“ that should
The service box from Optibelt be included in every
is meant to support many service box!
application areas on site. Centre distances, belt lengths and pulley diameters can be established quickly and easily by means of the fl exible measuring tape.
V-belts and pulleys can be identifi ed quickly and Optibelt Messlatte zur Messung der Innenlänge
effortlessly with the Optibelt Measuring Gauge for measuring the inside length
©
07
20
elt
tib
Op
ntz
Ar
up
Gro
Alle ermittelten Innenlängen sind nur Anhaltswerte! All determined inside values are approximate!
Exakte Längenbestimmung nach DIN/ISO/RMA-Norm durchführen.
Exact length measurement according to DIN/ISO/RMA-Standard.
Umrechnungstabellen Conversion table/Längenadditionswerte Length additional value
Optibelt Zahnriemen timing belts OMEGA / HTD / STD / ZR / ALPHA
Profil section
Lw ≈ Li +
3M
6
5M
8M
11
14M
22
XL
40
L
6
H
10
XH
14
48
T5/AT5
8
T10/AT10
19
Lw Wirklänge Pitch length ≙ Ld Richtlänge Datum length, La Außenlänge Outside length, Lb Bezugslänge Effective length, Li Innenlänge Inside length
Kfz-Keilriemen
Automotive V-belts
Optibelt Schmalkeilriemen Wedge belts
Profil section
Measuring Gauge
for V-belts, timing belts and ribbed belts
Measuring range: 500-2,500 mm inside length (Li)
Ld ≈ Li +
La ≈ Li +
SPZ
XPZ
38
—
3V/9N
3VX/9NX
—
42
SPA
XPA
SPB
XPB
45
—
5V/15N
5VX/15NX
67
—
SPC
XPC
—
80
87
—
AVX 10
AVX 13
—
51
—
63
25
D/32
60
85
Optibelt Klassische Keilriemen Classical V-belts
Profil section
Ld ≈ Li +
8
19
Z/10
ZX/X10
22
A/13
AX/X13
30
B/17
BX/X17
20
40
50
C/22
CX/X22
60
Optibelt Doppelkeilriemen Double section V-belts
Profil section
Lb ≈ Li +
AA/HAA
BB/HBB
28
32
CC/HCC
60
Optibelt Rippenbänder Ribbed belts
Profil section
Lb ≈ Li +
PH
6
PJ
9
PK
14
PL
22
optibelt Technical Tools
optibelt CAP 6.0
Drive calculation program
The Optibelt CAP calculation program has been
used world-wide for many years for calculating
and sizing belt drives.
Optibelt now introduces the next generation CAP 6.0.
The new graphics present the drive c­ alculation
in a clearly arranged format, making drive selection
quick and clear.
A new feature of CAP 6.0 is the Drive Optimisation ­facility. The program can ­suggest ­alternatives to optimise the drive in terms of cost or size and allows the input of information such
as existing service intervals, maintenance and energy costs. The potential savings achievable from the optimised drive can
then be displayed or printed as a report.
optibelt Technical Tools
optibelt CAD Pulleys
Internet service for designers and developers
Optibelt pulleys plus enables designers and developers to access CAD drawings of Optibelt standard pulleys via the internet.
The web based interactive catalogue with Vee, ribbed and timing belt pulleys provides quick and trouble free access to a great amount of useful information. Drawings can be downloaded in both 2-D and 3-D format.
Click on www.optibelt.com
for CAD drawings online.
We would
like to know
more about
optibelt
products
 Please provide us with further information
 Please contact us
Company
Sector
Department
Title
First Name
Surname
Street/P.O. Box
A member of the Arntz Optibelt Group
Postal Code
Town
Telephone
Fax
E-Mail
● Fax +49 (0) 52 71 - 97 62 00
© Arntz Optibelt Gruppe 321393/0409Hux
Optibelt GmbH
P.O. Box 10 01 32 37669 Höxter/Germany Tel. + 49 (0) 52 71 - 6 21
Fax + 49 (0) 52 71 - 97 62 00 www.optibelt.com
[email protected]