Pressure And Vacuum Electronics
PAVE Catalog.indd 1
www.PAVEtechnologyCo.com
10/27/06 3:22:16 PM
Pressure And Vacuum Electronics
PAVE seals are hermetic seals for low or high pressure,
vacuum, gas, or fluid environments with electrical or fiber
optic applications. Virtually any type of insulated wire,
multi-conductor cable or pin connector type may be specified
for a hermetic version with no detectable leakage through the
stranded wire copper conductors, insulation, shielding, through
glass or plastic fiber optic cables.
No Leaks
Highest Quality
Whether low or high pressures or vacuums, low or high
voltages or amperages, electrical or fiber optic, sealing
gases or liquids, with PAVE-Seals® there is:
• No detectable leakage through the stranded
copper wire conductors regardless of length.
• No detectable leakage through any cable
shielding or insulation including Teflon®.
100% leak and electrical testing is typical with
ISO9001:2000 procedures for the highest reliability and
quality for our customers developed over 25 years of
successful service. All PAVE products for commercial
use are RoHS compliant.
Not Fragile
The more robust epoxy PAVE-Seals replace traditional
hermetic glass or ceramic pin seals whose glass or
ceramic can be prone to cracking, corroded solder pin
joints, higher installed costs and non-copper contacts
with pressure applications of 700 bar (~10,000 psi).
High Vacuum Clean
NASA and major semiconductor companies have
approved hermetic PAVE-Seal® epoxy seals for their
low outgassing in high vacuums to 10-8 Torr, especially
in systems with optics. Special cleaning or packaging
processes are also available.
Readily Customized
Standard existing designs or readily customized hermetic wire or copper pin connector seals for small or
high volume applications are available. All epoxy molded
PAVE-Seals offer optimum low costs, compact designs
and high reliability for PAVE customers whether small
quantities of seals or +100,000/yr.
Chemically Robust
PAVE-Seal® epoxy is compatible with a very wide range
of chemicals including gasoline, SF6, natural gas,
propane gas, hydrogen, helium, argon, nitrogen, Fluorinert, mineral oil, silicone oil, kerosene, saltwater, transmission fluids, JP8 jet fuel. Free epoxy samples for evaluation available upon request.
Temperature Resistant
Temperature range of PAVE-Seal epoxy limited only by
the o-ring compound and wire insulation ratings used
with the PAVE-Seal® Wire Harnesses or PAVE-Mate®
connectors. The maximum range can be below -80°C
to up to 200°C.
Engineer Friendly Website
See our website for our Quick Ship In Stock Price
List for seal designs available for immediate shipment
as well as the most current hermetic seal design
drawings and our online quote request form in Design
Assistance web link.
Teflon®, Tefzel® and Viton® are the registered trademarks of the DuPont Corp.
For quote request forms,
see form on our website in Design Assistance Link
2
PAVE Catalog.indd 2
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:23:04 PM
Wide Range of Customers Use PAVE Products
Commercial • Industrial • Medical • Scientific
• Electronic Fuel Injection in motorcycles, snowmobiles, ATV, marine, F1 racecars
• Volvo S60/V70 automobiles with low emission PZEV steel fuel tanks
• Natural & propane gas and hydrogen fuel cell powered vehicles
• Ford Explorer air suspensions
• Offshore oil exploration, NOAA weather buoys
• Utility voltage switches and lithium battery seals
• Oil-cooled X-ray machines
• Centrifuges, cyclotrons, mass spectrometers
• Mass flow meters
• Pressurized cameras, clean rooms
• Scanning Electron Microscope systems
• Gulfstream G450/500/550, Airbus A380 and Eclipse jet aircraft
• Flywheel & Stirling engine systems
• UV water purification systems
Military
• F-15 jet engine controls (for +20 years)
• Humvee/Hummer transmissions
• Helicopter night vision, laser and
fuel systems
• F-15E/16 FLIR thermal imaging
sensor systems
• Tank fuel and fire control systems
• PAVE-Way III laser/GPS smart bombs
• Nuclear glove boxes
• Submarine and ROV sonar and
acoustic systems
• NASA/EADS International Space Station
and satellite test thermal vacuum chambers
• X47-B Naval Unmanned Combat
Air Systems
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 3
3
10/27/06 3:23:08 PM
Pages Table of Contents
6-23 PAVE-Seal® Wire Harnesses
Hermetic thru-bulkhead continuous conductor wire seals from
1 to 900 wires, #6 AWG to #30 AWG, any type insulation, low
or high pressures or vacuums, gas-tight, moisture-proof,
sealed including through the conductor or insulation. Plastic
(see pages 6-9) or metal housings (see pages 10-12).
24-29 PAVE-Mate® I
PAVE-Mate I style connectors have dual sided electrical
disconnecting plugs on BOTH SIDES with male pins on hex side
and female sockets on thread side from 2 to 128 contacts, #4
AWG to #22 AWG.
30-32 PAVE-Mate® II
PAVE-Mate II with a single side disconnect and either pre-wired
and sealed insulated wire leads or solder cups on the other side.
33 FAQ’s (samples of frequently asked questions)
Available Circular Connectors per MIL-Spec
Amperage Ratings by wire gage or size
For details, visit
www.PAVEtechnologyCo.com
34-35 PAVE-Mate® Rectangular Connectors
Standard density, high density, micro d and nano d-subminiature
hermetic connectors with either single or dual sided connectors
from 9 to 102 pins. Also coaxial and low cost thermocouple
contact versions for pressure or vacuum, light weight aluminum or
plastic shells.
36-38 Coaxial, EMI Cables and Connectors
Hermetically sealed coaxial or shielded cables of any type or
PAVE-Mate connector types with isolated shields (BNC, SHV,
SMA, etc.) and multi-pin coaxial PAVE-Mate connectors, single or
dual sided connections.
39 PAVE-Flex
PAVE-Flex is an insulated flat cable or flex circuit hermetically
sealed, any type can be specified though solid copper conductor
flat cable is the most economical.
40-42 Thermocouple PAVE-Seals®
1 to over 100 insulated, hermetic thermocouple pair wires of any
type or multi-pin thermcouple connectors. Welded wire junctions
can also be ordered.
43, 45 Threaded Cu Rod Hermetic
Threaded copper or brass terminals or studs hermetically sealed
for 20 amps to 1000 amps service up to high voltages for pressure
or vacuum, single or multiple terminal penetration seals.
4
PAVE Catalog.indd 4
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:23:47 PM
Pages Table of Contents
44-45 Solder Cup Pin Seals
#20 AWG or smaller pins on either one or both sides for low or high
pressures and vacuum hermetic header seal in small diameter
seals.
46-47 High Voltage Hermetic Seal
Any type of high voltage wire or cable can be hermetically
sealed for up to 32 kV applications, including termination with
cable connectors.
48-49 Fiber Optic Seals Product Index
PAVE-Optic Seals can be single or multiple fibers, single or
multi-mode fibers of any lengths or connector types such as SMA,
ST, FCPC and other connector types for low or high pressures or
vacuums.
50 Explosion-proof Wire Seals
EExd II, UL, Factory Mutual Enclosure 3600, and/or CSA in metric
threads, NPT threads and/or TIG/laser welded designs can be
provided.
51 Design Assistance Quote Form
For details visit,
www.PAVEtechnologyCo.com
Technical Data
Seal Integrity PAVE-Seal ® PAVE-Mate ®
PAVE Optic-Seal™ PAVE-Flex ®
While all PAVE products will comply with helium
leak rates ranging from <10 -6 cc/sec to 10 -9 cc/sec
(air equivalent) depending upon the design, PAVE also
uses more cost effective air bubble in fluid leak testing
typically at 80 psi (5 bar). Special high pressure
testing up to 10 k psi (600 bar) is also available.
SPECIFICATIONS
>17.4 kV/mm
Dielectric Strength
5.3 @ 1 Mhz
Dielectric Constant
Volume Resistivity
@125° C 1x10-11 Ohm-cm
Dissipation Factor
0.03 @ 1 Mhz
96
Hardness, Shore D
HERMETIC EPOXY TEMPERATURE RATING
Low Vacuum Outgassing:
(Epoxy is proprietary and not sold separately)
0.25%
TML
0.01%
CVCM
PAVE-Seal® 150
PAVE-Seal® 200
PAVE-Seal® 200FR
-40° to 150° C
-60° to 200° C
UL94V-O flame retardant
Toxicity Rating K (NASA MAPTIS)
Odor Rating A
UL
®
FM
High Fungus Resistance
MIL-STD-454J/4
Specific Gravity
@ 25° C 2.3
Compressive Strength
>948 kg/cm2
Compressive Modulus
7.7x104 kg/cm2
Tensile Strength
Water Absorption (24 hours)
0.03%
Thermal Vacuum Stability Rating A
Flammability Rating X
(Use Flammability Rational Codes)
FM Class 3600, EExd II, 90° C TI
The PAVE-Seal epoxy is impervious to most oils, solvents,
fuels, freons, gases, etc. Epoxy samples are available upon
request for a customer’s evaluation for any specific chemical
compatibility.
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 5
>470 kg/cm2
5
10/27/06 3:23:52 PM
PAVE-Seal® Wire Harnesses
Smallest, most compact seal designs and lowest costs, especially for large quantities. Other plastic
housing shell materials besides PAVE-Seal epoxy such as Nylon, Ryton and PPS may also be available.
Insulated, stranded conductor wires are standard (except for
thermocouple wire which is normally solid conductor) with no
detectable leakage through the wire insulation or conductors.
Commercial or mil-spec wires may be specified.
C
INSTALLATION PORT USING
INTERNAL RETAINING RING
B
INSTALLATION PORT USING
EXTERNAL RETAINING RING
SPF12
SPF18
A
15°
A
B
C
0.37 0.438 0.376
SP6
1.21 0.540 0.506
SP8L
SP11M 1.00 0.754 0.689
# of o-rings TRUA RC P/N
N5000-75
1
N5000-56
2
3
N5000-75
PAVE-Seal® Wire Harnesses
See Website Quick Ship Price List
Dimensions in inches [mm]
PAVE-Seal® #2846
SP4S 4 #28
Teflon wires
Hermetic seal vacuum to up to
250 bar (+3000 psi) pressure.
Locked into place with internal
retaining ring
PAVE-Seal® #2244
15 #26 solid conductor
Teflon wires
Hermetic seal for vacuum to 10
bar (150 psi)
Thin wall nitrile gasket face seal
with nylon nut
Other sizes available
SP6
PAVE-Seal® #1632
SP6 6 #28
Teflon wires
Hermetic seal for vacuum to 300
bar (5000 psi) pressures
6
PAVE Catalog.indd 6
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:23:56 PM
PAVE-Seal® Wire Harnesses
SP8
Dimensions in inches [mm]
PAVE-Seal® #1226
SP8 Housing sizes
Four different length
versions with one or two
O-rings for a variety of wiring
PAVE-Seal® #0597
SP8L 9 #22
Tefzel wires
Seals vacuum up to 200 bar
(3000 psi)
12.57±0.25
.495±.010
PAVE-Seal® #2624
SP8L 2 #16
Tefzel wires
Also used in low pressure 1 bar
(15 psi) marine fuel pump seals
PRESSURE
ATMOSPHERE
0.02
290±6
11.42±.24
25.40
1.00
150±6
5.91±.24
4.75±0.76
.19±.03
PAVE-Seal® #2131
SP8M 2 #22
XLPE shielded cable
Used in UV water purification
systems
PAVE-Seal® #0889
SP8S 6 #24
PVC wires
Offshore seabed logging to 200
bar (3000 psi) pressures
SP9
PAVE-Seal® #1627
SP9 16 #24
Teflon wires
Super high pressures to 700 bar
(10,000 psi)
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 7
7
10/27/06 3:24:08 PM
PAVE-Seal® Wire Harnesses
SP11
Dimensions in inches [mm]
PAVE-Seal® #1374
SP11 Housing sizes
3 different lengths with one or
two O-rings
PAVE-Seal® #2298
SP11M 21 #26
Teflon wires
Vacuum to 200 bar (3000 psi)
PAVE-Seal® #2316
SP11L 10 #24
Teflon wires
Mass flow meters, fuel pumps,
transmissions
SPF12
PAVE-Seal® #2104
SPF12 10 #28
Teflon wires
Vacuum to 40 bar (600 psi)
PAVE-Seal® #1575
SPF12 4 #10
Teflon wires
Up to 40 amps per wire
ATMOSPHERE
PRESSURE
2.64±0.15
2x .104±.006
AT TOP OF RADII
AT GROOVE BASE
®
PAVE-Seal #3053
SPFL12 2 #14 & 2 #20
Teflon wires
Fuel pumps, fuel cell systems
21.97±0.20
.865±.008
2
10.57±0.15
.416±.006
1
3.78±0.15
.149±.006
1
INSTALLATION PORT
A
DETAIL A
SCALE 4 : 1
17.83±0.15
.702±.006
1 GROOVE 1
16.41±0.15
.646±.006
O-RING GROOVES
2 GROOVE 2
530 MIN
20.87 MIN
- DENOTES FIT/FUNCTION KPC
- DENOTES SAFETY/COMPLIANCE KPC
- DENOTES QUALITY/CUSTOMER INTERFACE (QCI)
PAVE Catalog.indd 8
15°
18.90±0.15
.744±.006
32
32
19.10±0.03
.752±.001
2
8
PLACE GREEN PAINT DOT HERE
19.27
.76
4x
3.18
.1
20.16
19.85
.794
.781
185 MIN
7.28 MIN
255 MIN
10.04 MIN
11.81±0.15
3
.465±.006
13.26±0.15
.522±.006
11.30
10.99
.445
.433
1.07±0.05
.042±.002
4
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:13 PM
PAVE-Seal® Wire Harnesses
SP16
Dimensions in inches [mm]
PAVE-Seal® #2189
SP16 12 #18
Teflon wires
Vacuum to 40 bar (600 psi)
Natural gas, propane, SF6,
hydrogen gas systems
SPF18
PAVE-Seal® #1733
SPF18 30 #22
Twisted Teflon wires
Double O-rings, vacuum to 20
bar (300 psi)
Humvee transmission,
high voltage switch seals
SP20
PAVE-Seal® #1707
SP20 70 #26
Teflon wires
Vacuum to +200 bar (3000 psi)
GE oil field equipment
SP26
PAVE-Seal® #2722
SP26 42 Twisted, shield #28
Teflon pairs
Vacuum to 40 bar (600 psi)
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 9
9
10/27/06 3:24:19 PM
PAVE-Seal® Wire Harnesses
For use in PAVE-Seal, PAVE-Mate, PAVE-Flex or PAVE-Optic Seal
products. Customer to specify wiring and/or contact arrangement to be
sealed in below housings. See following pages.Other sizes not shown
may be available, including metric. Dimensions are subject to change.
Explosion-proof housings to Factory Mutual, CSA, UL, or CENELEC EN
specifications are also available. Confirm all pressure ratings above
300 psi (20 bar) with the factory sales engineers.
Standard Metal Housings
(Shown without wires, pins, or epoxy seal)
Available in 300 Series Stainless (SS), Brass (B),
Galvanized Steel (PS), or Aluminum (AL).
Other sizes available.
Pipe Thread (NPT)
10-6 Torr (mbar) to +3,000 psi (+200 bar)
PAVE
Part
No.
PT1
PT2
PT4
PT6
PT8
PT12
PT16
PT24
Thread
Size
inch
1/16
1/8
1/4
3/8
1/2
3/4
1
1-1/2
PT
Length
inch
0.53
1.06
0.84
0.84
1.10
1.17
1.36
1.62
PIN
Length
inch
1.06
1.06
1.45
1.45
1.89
1.97
2.34
2.61
“L”
mm
13,46
26,92
21,34
21,34
27,94
29,72
34,54
41,15
“L”
mm
26,92
26,92
36,83
36,83
48,01
50,04
59,44
66,29
Hex
Size
inch
0.38
0.50
0.71
0.85
1.00
1.30
1.60
2.30
Left or Hex
Pressure Side
Max
“H”
mm
9,65
12,70
18,03
21,59
25,40
33,02
40,64
58,42
PT Style
Left
Pressure
Side
PTN Style
SAE Straight Thread O-Ring (UNF-2A Threads)
10-8 Torr (mbar) to +4,000 psi (+300 bar)
PAVE
Part
No.
S06
S08
S08L
S012
S012L
S016
S016L
S022
S026
Thread
Size
inch
3/8 - 24
1/2 - 20
1/2 - 20
3/4 - 16
3/4 - 16
1-1/16 to 12
1-1/16 to 12
1-5/8 to 12
1-7/8 to 12
Length
inch
.061
0.67
1.50
0.80
1.25
1.09
1.50
2.00
2.12
“L”
mm
15,49
17,02
38,10
20,32
31,75
27,69
38,10
50,80
53,85
Parker
O-Ring
Size
3-3
3-5
3-5
3-8
3-8
3-12
3-12
3-20
3-24
Right
Pressure
Side
“B”
inch
mm
.30
7,62
.36
9,14
.36
9,14
.44
11,18
.44
11,18
.59
14,99
.59
14,99
.63
16,00
.59
14,99
Hex
Size
inch
0.56
0.71
0.71
1.00
1.00
1.44
1.44
2.15
2.45
Max
“H”
mm
14,22
18,03
18,03
25,40
25,40
36,58
36,58
54,61
62,23
Left Side
Pressure Side
B
Vacuum Seal and Jam Nut (UN-2A Threads)
10-8 Torr (mbar) to +1,000 psi (+70 bar)
Left Side
Pressure Side
Thru hole diameter is +0.010, -0.000 inches (+0,254, -0.000 mm) thread size
PAVE
Part
No.
Thread
Size
inch
Length
inch
“L”
mm
VS8
VS12L
VS15L
VS18
VS22
VS26
VS32
1/2 - 20
3/4 - 16
1-14
1-1/4 to 12
1-5/8 to 12
1-7/8 to 12
2-1/2 to 12
0.90
1.48
1.88
1.88
2.00
2.12
2.25
22,86
37,59
47,75
47,75
50,80
53,85
57,15
O-Ring
“B”
Size
inch
mm
Hex
Size
inch
Max
“H”
mm
-112
-116
-215
-219
-224
-226
-231
0.96
1.25
1.73
1.91
2.59
2.88
3.25
24,38
31,75
43,94
48,51
65,79
73,15
82,55
.44
1.03
1.25
1.25
1.25
1.25
1.25
11,18
26,16
31,75
31,75
31,75
31,75
31,75
B
VS
8
T(in)
.25
T(mm) 6.4
N(in)
.77
N(mm) 20
12
15
18
22
26
32
.31
7.9
1.0
25
.32
8.1
1.6
36
.36
9.1
1.7
43
.39
9.9
2.3
58
.41
10
2.5
63
.41
10
3.3
83
Tighten nut to 20 ft-lbs max to avoid damage.
NW, ISO, Conflat or ASA Vacuum Flanges
10-8 Torr (mbar) to 150 psi (+10 bar)
PAVE
Part
No.
NW16
NW25
Length
inch
1.15
2.03
“L”
mm
29,21
51,56
Tube
O.D.
inch
mm
3/4
19,05
1
25,4
NW40
2.40
60,96
1-1/2
10
PAVE Catalog.indd 10
38,1
L
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:23 PM
PAVE-Seal® Wire Harnesses
See Website Quick Ship Price List
Dimensions in inches [mm]
PAVE-Seal® #2064
SO8 1/2"-20 4 #24
Teflon wires
Vacuum to +60 bar (+1000 psi)
PAVE-Seal® #1588
PT8 1/2"NPT 9 #22
Tefzel wires
Vacuum to 200 bar (3000 psi)
PAVE-Seal® #1708
PT8 1/2"NPT 2 #14
Teflon wires
Vacuum to 200 bar (3000 psi)
PAVE-Seal® #1649
VS15L 1"-14 12 #20
Teflon wires
High vacuum to 20 bar (300 psi)
Higher pressures if on O-ring
side
PAVE-Seal® #1872
VS15-AL 20 #22
Teflon wires
High vacuum to 20 bar (300 psi)
PAVE-Seal® #2411
PT2 1/8" NPT 5 #24
Teflon wires
Vacuum to pressures to 200 bar
(3000 psi)
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 11
11
10/27/06 3:24:24 PM
PAVE-Seal® Wire Harnesses
Dimensions in inches [mm]
PAVE-Seal® #2281
Custom AL flange
9 #23 shielded
rubber cable
Pressures to 70 bar (1000 psi)
PAVE-Seal® #2301
Modified VS22 for low profile
Shielded 39 wire cable with
connectors
PAVE-Seal® #3223
VS22 1-5/8” thread, 16 #14
Tefzel wires
High vacuum to 40 bar (600 psi)
PAVE-Seal® #0367
1-1/2”NPT Nipple,
9 #10
PE/Teflon wires
Vacuum to 40 bar (600 psi)
PAVE-Seal® #3112
SO12 3/4"-16 thread, 15 #28
Teflon wires
High vacuum up to 70 bar
1000 psi)
12
PAVE Catalog.indd 12
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:27 PM
PAVE-Seal® Product Index
Note: stock items are subject to
change. Please check website
for most current updates.
DESCRIPTION CODE BREAKDOWN
HOUSING
PART
SEE PAGES
6-10
HOUSING
MATERIAL
UPPER
PAVE-SEAL®
TEMPERATURE
RATING
°C
NUMBER OF
WIRES
YOUR CHOICE
OPTIONS
PT
SO
VS
CF
SP
B = Brass
SS = Stainless Steel
PS = Plated Steel
AL = Aluminum
E = Epoxy Molded
Type Codes:
dsub = dsub or micro d-sub
fo = fiber optic
hp = high pressure
hv = high voltage
pf = flat cable
150
200
200FR
1 thru?
P = pair (ie,tc)
TP = twisted pair
TSP = twisted
shielded
pair
WIRE LENGTH
ON LEFT OR
HEX SIDE
METRIC OR
ENGLISH
WIRE
INSULATION
AND GAGE
PC = PVC insulated
TE = Teflon insulated
TZ = Tefzel insulated
JT = J thermocouple
KT = K thermocouple
ET = E thermocouple
TT = T thermocouple
Wires
1
WIRE LENGTH
ON RIGHT OR
THREAD SIDE
METRIC OR
ENGLISH
• Indicate inches, feet, millimeters,
or meters.
• Unlimited lengths.
• Options include end stripping,
tinning, or terminations.
• Thermocouple wire is Teflon
insulated with #20 and #24
standard sizes.
Type
1
Type
2
Total
Wires
PAVE Description Codes.
Housing & wires
AWG#
Wires
2
AWG#
PART/
DRAWING#
ps
stock
2
PT8-SS-150-2-TEE14-10-10
2
14
1708
ps
stock
4
SPF12-E-150-4-TEE10-24-36
4
10
1575
ps
stock
6
SP6-E-150-6-TE28-50-50cm
6
28
1632
ps
stock
9
PT8-SS-200-9-TZ22-24-24
9
22
1588
ps
stock
9
SP8L-E-150-9-TZ22-5-16
9
22
597
ps
stock
10
SPF12-E-150-10-TE28-12-10
10
28
2104
ps
stock
12
SP16-E-150-12-TEE18-24-24
12
18
2189
ps = PAVE-Seal with wires
both sides
ps
stock
12
VS15L-SS-150-12-TEE20-48-48
12
20
1649
ps
stock
20
VS15-AL-80-20-TE22-48-48
20
22
1872-1
pm1 = PAVE-Mate I with
pins both sides
ps
1
PT8-SS-80-1-PC2RED-120-240
1
2
2408
ps
1
PTN12-SS-200-1-TE18-12-24(20)
1
18
2508
pm2 = PAVE-Mate II with
pins one side
ps
1
SO6-B-80-1BLK-TEE16-15-10
1
16
0047C
ps
1
SON9-PS-80-1C-2PE18-3-64
1
18
801
rf = coaxial
ps
1
SP2-E-150-1-FEP26-12-12
1
26
685
ps
1
SP4S-E-150-1-TE22-12-60
1
22
2005
ps
1
SP6-E-150-1-TE20-25-25
1
20
1870
PS
1
SP8S-E-150-1-R2950062-15-15
1
16
2631
sh = shielded cables
sc = solder cup
stock = in-stock price list
item (see website)
tc = thermocouple
terminal = hi current
threaded Cu rod
ex = explosion proof
ps
1
SPF5L-E-150-1-TEE18-12-12
1
18
1836
1
TP1-E-150-1-PC30-4-4
1
30
2073
ps
1
VS8-SS-150-1-TEE12-72-24
1
12
2111
ps
2
FL/PTF8-AL-150-2-TE14-3-2.5
2
14
2720
ps
2
MT-SS-200FR-2-KP26-95mm-BLADES
2
26
2406
ps
2
PT16-B-4-ALPHA 5122C-120-30
2
22
1658
ps
2
PT2 SS-80-2-TEE22-20-8
2
22
900
ps
2
PT2-B-80-2-PC24-6-6
2
24
1676
ps
2
PT2-SS-80-2-PC22-4.5-4.5
2
22
2021
ps
2
PT2-SS-80-2-TEE22-6.0-6.0
2
22
2182
ps
2
PT32-S-80-2-IPC24-60-84 2
2
24
775
ps
hp
ps
2
PT4-B-150-2-TET28-.29GT-2.25
2
28
2324
2
PT4-SS-200-1-TSP20/LOOP-1.75-2.5
2
20
1515-1
2
PT6-SS-150-2-TE14-84-36
2
14
1506
2
PT8-SS-150-1TSP-TEE18-12-12
2
18
2968
ps
2
PTN12-SS-200-2-8K-24-216
2
8
2243
ps
2
PTN16-SS-150-2-Alpha45052-24-24
2
18
2337
ps
2
PTN16-SS-200-2-TEE10-36-240
2
10
1757
ps
2
SO12/PT12-SS-150-2-TEE18-24-24
2
18
180
ps
2
SO12-SS-80-2-TE12-60-60cm
2
12
2297
ps
2
SO6-SS-150FR-1TP-TE24-12-4
2
24
2031
ps
sh
ps
ps
sh
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 13
13
10/27/06 3:24:32 PM
PAVE-Seal® Product Index
Type
1
Type
2
Total
Wires
PAVE Description Codes.
Housing & wires
Wires
1
AWG#
ps
2
SO8-SS-150-2-TZ22-18-18
2
22
1652
ps
2
SO8-SS-80-2-TE18-24-24
2
18
2585
ps
2
SO8-SS-80-2-TE22-6-6
2
22
1660
ps
2
SP16-E-150-2-TEE10-16-16
2
10
2335
ps
PART/
DRAWING#
2
SP1TP-U-100-2C-CW3732REV1-.7-96
2
26
2128
SP5-P-150-2-TE28-6-6
2
28
2591
ps
2
SP5-P-150-2-TEE26-15-5ST
2
26
1398
ps
2
SP5P-E-150-2-XLP22-.3M-.3M
2
22
1877
ps
hp
2
SP5-PH-150-2-TE28-6-6
2
28
1712
ps
2
SP6-E-150-2-TE22-12-12
2
22
2633
ps
2
SP6-E-150-2-TE24-12-12
2
24
1735
2
SP6-E-150-2-TE24-40CM-40CM
2
24
1735
ps
2
SP6-E-150-2-TZ22-6-30
2
22
2771
ps
2
SP6-E-200-1TP-TE26-6-24
2
26
1598
ps
2
SP6-E-200-2-24-T
2
24
1847
ps
hp
hp
ps
hp
2
SP7L-E-150-2-TEE20-12-12
2
20
1381
ps
sh
2055
2
SP8/83-E-150-2SJ-TE18-12-32
2
18
ps
2
SP8/83-E-150-2SJ-TEE20-3-32
2
20
760
ps
2
SP8L-E-150-2-PC16-4-6
2
16
1368
ps
2
SP8L-E-150-2-PC18-4/5-10
2
18
1693
ps
2
SP8L-E-150-2-PC18-9-10
2
19
1610
ps
2
SP8L-E-150-2-TZZ16-200-150mm
2
16
2624
ps
2
SP8L-E-150-2-TZZ16-4-6
2
16
2832
ps
2
SP8L-E-150-2-TZZ18-4-10
2
18
2620
ps
2
SP8L-E-150-2-TZZ18-4-20
2
18
2752
ps
2
SP8L-E-150-2-TZZ18-6-12
2
18
2390
ps
2
SP8L-E-80-2-PC18-10-9
2
18
1738
ps
2
SP8L-E-80-2-TE16-4-6
2
16
2550
2
SP8M-E-150-1TSJP-PE22-297-20
2
22
2131
ps
2
SP8M-E-150FR-2-IPC14-12-12
2
14
1762
ps
2
SP8M-E-200FR-2-IPC14-12-12
2
14
1763
ps
2
SP8M-E-80-2-TE22-10-10
2
22
1706
ps
2
SP8S-E-100-2-PE20-20CM-20CM
2
20
1383
ps
ps
sh
2
SP8S-E-150-1TJSP-PE22-306-2
2
22
2177
ps
2
SP8S-E-150-2-TE28-6-6
2
28
2058
ps
2
SP8S-E-150-2-XLPE22TXL-.6m-.3m
2
22
1878
ps
2
SP8S-E-200-2-TE22-8-18
2
22
1977
ps
sh
2
SP8S-E-80-1TSJP-PC22-120-3
2
22
1874
ps
sh
2
SPF12-E-150-2-18-C85083-.5-10 w/COLLAR
2
18
971
ps
2
SPF12-E-150-2-PC12-12-12
2
12
2524
1420
ps
2
SPF12-E-150-8-2-PC18-18-18
2
18
ps
hp
2
SPF7.5-PH-150-2-TE18-5-12
2
18
1673
ps
hp
2
TP2-E-150-2-PC30-4-4
2
30
2033
ps
2
VCR4-SS-150-2-TEE22-6-22
2
22
1280
PS
2
VS12L-SS-150-2-TE12-36-36
2
12
2725
2
VS12L-SS-80-1TSP/2P-TE16/KT27-6-6
2
16
2381
2
VS14-B-150-1/1-TUBE/TUBE-36-X probe
2
2
VS15L-SS-150-1-PROFIBUS/DP-3M-3M
2
22
2955
ps
2
VS18S-SS-150-2-PC8-10-9
ps
2
VS8-B-80-2-UL1061-230M-160M
2
ps
ps
ps
sh
ps
ps
ps
PAVE Catalog.indd 14
AWG#
2
ps
14
Wires
2
sh
sh
2215
2
8
2090
2
22
1697
VS8-SS-200FR-1TSJP-2FEP22-6-31
2
22
1397
2
VS8-SS-80-2-PC26-12-4
2
26
1172
2
VS8-SS-80-2-TE22-12-12
2
22
2113
UL1061=PC28
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:38 PM
PAVE-Seal® Product Index
Type
1
Type
2
Total
Wires
PAVE Description Codes. Housing
& wires
Wires
1
AWG#
Wires
2
AWG#
ps
2
VS8-SS-80-2-TEE18-30-40CM
2
18
ps
3
FLOPW 3 CABLE IS ASSEMBLY
3
24
1827
3
FL-SS-150-3-PTFE12-44-24
3
12
1407
1805
PS
3
PT12-PS-150-3-TEE10-4-4
3
10
2637
ps
3
PT12-PS-150-3-TEE12-4-4
3
12
1860
ps
3
PT12-SS-200FR-3-TEE12-12-12
3
12
1787
ps
3
PT2-B-80-3-PC24-6-6
3
24
1675
ps
3
PT2S-PS-150-3-TEE18-24-5
3
18
2302
ps
3
PT8/VS18-SS-150-3-PC12-36-36
3
12
1717
ps
3
PT8-B-150-3-PC18-12-12
3
18
0834-1
ps
3
PT8-B-150-3-PC18-6-6.38
3
18
1685
ps
3
PT8-B-150-3-PC18-9-9
3
18
858
ps
3
PT8-SS-150-3-TEE14-18-36
3
14
1447
ps
3
PTN12-SS-150-3-TEE12-18-18
3
12
1623
ps
3
PTN12-SS-150-3-THHN12-240-240
3
12
2610
ps
3
PTN12-SS-200-3-8K-24-216
3
8
2242
ps
3
PTN16-SS-150-3-TEE6-18-18
3
6
2543
ps
3
PTN16-SS-150-3-TEE8-18-18
3
8
1631
ps
3
PTN20-PS-150-3-2-18-107,
submersible water pump seal
2
2932
ps
3
PTN20-PS-150-3-H8-150-50,
submersible water pump seal
8
2898
ps
3
PTN24-PS-80-3-HYP4-82-66
3
4
1766
ps
3
PTN8-SS-150-3-THHN12-240-240
3
12
2611
2514
ps
3
PTNL16-B-150-3-PC16-12-72
3
16
3
PTW20-SS-150-TEE6 AWG
3
6
1233
ps
3
SO12/PT8-B-150-3-PC18-8-8
3
18
1328
ps
3
SO12-PS-150-3-PC16-4.38<2(2)
3
16
1894
ps
3
SO12-SS-150-3-TE18-10-10
3
18
2902
ps
3
SO7-SS-150-3-TE22-18-18
3
22
1337
ps
3
SO8L-SS-200-3-TEE24-12-12
3
24
745
ps
3
SP11M-E-80-3-TE14-1M-1M
3
14
2351
ps
3
SP2-E-150-3-ET28-4-4
3
28
2190
weld
ps
ps
3
SP6-E-200-3-TE26-6-6
3
26
2870
3
SP8/60-E-150-3-KYNAR22-12-80 HI P
3
22
1373
ps
3
SP8L-E-150-3-PC18-10-7
3
18
1796
ps
3
SP8L-E-150-3-TEE16-800-50mm
3
16
2788
ps
3
SP8L-E-150-3-TZZ18-6-12
3
18
2426
ps
3
SP8L-E-80-3-PC18-181mm-175mm
3
18
1640
ps
3
SP8S-E-150-3-TZ22-6-6
3
22
2542
PS
3
SP8S-E-150-3-TZZ18-8-8
3
ps
3
SP8S-E-150-3W-KYNAR22-12-80
3
22
1303
ps
3
SPF12-E-200-3-TEE14-18-18
3
14
2809
ps
3
SPF12-E-200-3-TEE14-18-18
3
14
2806
ps
3
SPF12-E-200-3-TZ14-18-18
3
14
2927
ps
3
SPF2-E-150-3 WIRE CABLE
3
24
1202
ps
3
VS12-B-150-3-PC14-11-8
3
14
1326
ps
3
VS12S-SS-200FR-3-TEE22-120-12
3
22
2386
ps
3
VS15L-SS-150-3-TEE12-24-24
3
12
1890
ps
3
VS15-SS-150-3-TEE10-48-8
3
10
1439
ps
3
VS15XL-C22-150-3-PC12-72-72
3
12
2799
943
ps
ps
hp
hp
2701
3
VS8-B-150-3-TEE24-6-24
3
24
ps
3
VS8-B-80-3-TE26-24-24
3
26
884
ps
4
1513-SS-150-4-TE28-5-65
4
28
1507
4
FL1931-AL-150-1-FAC4PC20-90-900mm
4
18
1893
ps
sh
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 15
PART/
DRAWING#
15
10/27/06 3:24:41 PM
PAVE-Seal® Product Index
Type
1
Total
Wires
PAVE Description Codes. Housing
& wires
ps
4
FLANGE-B-150-4-TE24-6-6
4
24
1545
ps
4
PT12-B-150-4-TEE12-36-36
4
12
2484
ps
4
PT12-SS-150-4-TEE12-36-36
4
12
1560
ps
4
PT12-SS-150-4-TEE18-36-36
4
18
1566
ps
4
PT4-B-80-4-PC20-12-12
4
20
1558
ps
4
PT4-B-80-4-PC20-16-16
4
20
1558
ps
4
PT4-B-80-4-PC20-5-5
4
20
1558
ps
4
PT4-SS-150-4-IPC28-12-12
4
28
1802
ps
4
PT6-SS-150-2/1SP-TE18/TE26-24-4
2
18
ps
4
PT6-SS-80-4-PC22-14-14
4
22
1798
ps
4
PT8/VS18-SS-150-4-PC12-36-36
4
12
1718
ps
4
PT8-B-150-4-TE14-72-72
4
14
1736
ps
4
PTN12-SS-150-4-THHN12-240-72
4
12
2612
ps
Type
2
2
AWG#
26
PART/
DRAWING#
2690
PTN12-SS-200-2TSP-TE18-48-12
4
18
1600
4
PTN16-SS-150-4-TEE10-12-12
4
10
1786
ps
4
PTN16-SS-150-4-TEE10-6-60
4
10
1853
ps
4
PTN16-SS-200-4-TEE12-36-240
4
12
1755
ps
4
PTN20-PS-150-1-4#10-*A-150 *SE,
subermersible water pump seal
10
2899
ps
4
PTN20-PS-150-4-H8-300-60
4
8
1502
ps
4
PTN20-PS-150-4J-H8-150-50
4
8
2899
4
PTW20L-SS-200-4-TEE10-36-144
4
10
1702
4
SO0098-S-150-4-HYP20-27T-*T Gendex
4
18
334
ps
ps
hp
4
SO12C-SS-150-2/2-TE12/26-1000m-1000m
2
12
ps
hp
4
SO12-SS-150-4-TE12-12-12
4
12
4
SO12-SS-150-4-TE14-12-12
4
14
2134
ps
2
26
2613
2365
ps
rf
4
SO12-SS-80-4/1-TE28/RG178-24-24
4
28
2474
ps
hp
540
4
SO16L-SS-150-4-NST20-24-24 (USE SP12 HI-P)
4
20
PS
4
SO6-SS-150-4-G22-24-4
4
22
2694
ps
4
SO6-SS-150-4-TE24-24-24
4
24
2023
ps
4
SO8-SS-150-4-TE24-6-6
4
24
2942
ps
4
SO8-SS-150-4-XLPE22-12-12
4
22
1946
ps
4
SO8-SS-80-2TP-PC24-6-6
4
24
2064
ps
4
SO8-SS-80-4-TE22-24-24
4
22
2586
ps
4
SP11L-E-150-4-TZ12-12-18
4
12
ps
4
SP11M-E-150-2/2-E14/26-160-80cm
2
14
2
26
2412
ps
hp
hp
2636
4
SP11M-E-150-2/2-GXL14/18-24-17
2
14
2
18
2075
ps
4
SP11M-E-150-2/2-GXL14/18-24-36
2
14
2
18
2533
ps
4
SP11M-E-150-2/2-TZ14/22-160-80cm
2
14
2
22
2476
ps
4
SP11M-E-150-2/2-TZ14/22-6-6
2
14
2
22
2832
ps
4
SP11M-E-80-3/1-TE14/20-12-20
3
14
1
20
1556
ps
4
SP16-E-150-4-PC20-SOC SOC=SOCKETS
4
20
1391
ps
4
SP4S-E-150-4-TE28-50mm-500mm
4
28
2846
ps
4
SP6-E-150-2-PC24-12-12
4
24
1546
ps
4
SP6-E-150-4-TE24-24-8
4
24
1599
ps
4
SP6-E-150-4-TZ22-5-5
4
22
2501
ps
4
SP6-E-200-4-TE24-6-24
4
24
2041
4
SP6X-E-150-4-TE30-6-6
4
30
2526
4
SP8-E-150-2P-TE28-7?-7?
4
24
4
SP8H-E-150-4CS/08434-1M-1M
4
ps
4
SP8L-E-150-2/2-TE18/20-8/4-6
2
18
2
20
2463
ps
4
SP8L-E-150-2/2-TE18/22-250-250MM
2
18
2
22
2229
ps
4
SP8L-E-150-4-18-SC-SC
4
18
2714
ps
4
SP8L-E-150-4-PC18-150CM-150CM
4
18
2770
ps
hp
ps
ps
PAVE Catalog.indd 16
Wires
2
4
ps
16
AWG#
ps
weld
sh
Wires
1
hp
1370
1257
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:44 PM
PAVE-Seal® Product Index
Type 1
Type
2
Total
Wires
PAVE Description Codes. Housing
& wires
Wires
1
AWG#
Wires
2
AWG#
ps
4
SP8L-E-150-4-PC18-4-10
4
18
1714
ps
4
SP8L-E-150-4-PC18-4-5
4
18
2362
ps
4
SP8L-E-150-4-PC18-8-8
4
18
2169
ps
4
SP8L-E-150-4-TE18-150CM-150CM
4
18
2711
ps
4
SP8L-E-150-4-TE22-12-12
4
22
1645
ps
4
SP8L-E-150-4-TEE16-8-6
4
16
2290
ps
4
SP8M-E-150-4-*-2-6
4
ps
4
SP8M-E-150-4C-TE26-36-36
4
26
2894
ps
4
SP8M-E-150-4-PC16-12-12
4
16
2019
ps
4
SP8M-E-150-4-PU22-5-18
4
20
1417
ps
4
SP8M-E-150-4-TEE16-12-12
4
16
2378
2946
1365
ps
4
SP8M-E-150-4-TZZ16-12-12
5
16
ps
4
SP8M-E-150-4-TZZ16-12-12
4
16
2946
ps
4
SP8SC-E-150-4-XLPE22-96-18
4
22
524
PS
4
SP8S-E-150-3/1-TEE24/R1788354-15-15
3
24
ps
4
SP8S-E-150-4-TEE20-6-21
4
20
2579
PS
4
SP8S-E-150-4-tz22-21-3
4
22
2648
ps
4
SP8S-E-150-4-TZ22-6-6
4
22
2789
4
SP8S-E-200-2-TSJP #24 CABLES
4
24
1356
4
SP8X-E-200-4-TE22-24-24 HI P
4
22
726
ps
sh
ps
1
18
2630
ps
4
SPF.56-E-4-TEEE18-24-18
4
18
ps
4
SPF12-E-150-2/2-TE14/20-6-10
2
14
ps
4
SPF12-E-150-4-PC18-18-18
4
18
3200
ps
4
SPF12-E-150-4-TE12-18-18
4
12
1358
ps
4
SPF12-E-150-4-TEE18-24-45
4
18
2219
ps
4
SPF12-E-80-4-PC18-80-1860
4
18
2193
ps
4
SPF12-E-80-4-PC22-16-1.5T
4
22
2080
ps
4
SPF12-E-80-4-PC22-16-1.5T
4
22
ps
4
SPF12L-E-150-2/2-TE14/20-600-264mm
2
14
1253
2
20
2911
2098
2
20
3053
2
22
1543
ps
4
SPF16-E-2/2-IPC16/18-31T-6T
4
16
ps
4
VS12L-SS-150-1/1-TSP16/22-6-6
2
16
ps
4
VS12S-B-150-4-M81044/12-22-10-5
4
22
ps
4
VS15L/PT8-SS-150-4-PC12-36-36
4
12
1856
4
VS15L-SS-150-2TSJP-12RE2N06-48-48
4
12
2349
ps
4
VS15-SS-80-4-PC12-24-48
4
12
1480
ps
4
VS15-SS-80-4-TEE12-30-40
4
12
1806
ps
4
VS18/PT8-SS-150-4-TZ12-36-36
4
12
2802
ps
4
VS9CONX-80-4-PVC18-6-6
4
1
1361
ps
4
VS9PG7-N-80-4-PC22-8-8
4
22
1316
ps
5
CF133-SS-80-5-PC10-96-96
5
10
993
ps
5
PT12-B-150-5-PC22-4-4
5
22
1970
ps
sh
826
1484
ps
5
PT12-PS-150-3/2-SRML16/18-12-24
5
16
ps
5
PT16-PS-150-3/2-SRML10/18-12-24
3
10
2
18
1108
ps
5
PT16-PS-150-3/2-SRML12/18-12-24
3
12
2
18
1105
ps
5
PT24-PS-150-3/2-SRML 6/18-12-24
3
6
2
18
1101
ps
5
PT24-PS-150-3/2-SRML4/18-12-24
3
4
2
18
1107
2
18
1446
ps
5
PT2-SS-150-5-TE24-50-50mm
5
24
ps
5
PT8-SS-150-3/2-TEE14/18-18-12
3
14
ps
tc
1103
2411
5
PTN16-SS-200-3/1P-TEEE14/JT20-36-36
5
14
1131
ps
5
PTN20-PS-200-3/2-TEE10/20-6-10
5
10
374
ps
5
PTNF12-SS-150FR-2/1/2-PCC12/14/18-*-14
3
14
2
18
1788
ps
5
PTNF12-SS-150FR-2/1/2-PCC12/14/18-*-14
3
14
2
18
1868
5
PTW20-SS-150-3/2-TEE10/18-7-7
5
10
weld
ps
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 17
PART/
DRAWING#
428
17
10/27/06 3:24:46 PM
PAVE-Seal® Product Index
Type
1
Type
2
Total
Wires
5
SO17LD-PS-150-5-TEEE14-48*-24
5
14
476
sh
5
SP11.8-E-200-2/1TSP/1-EE16/E20/E24
5
16
1266
ps
5
SP11M-E-80-5-TE24-1M-1M
5
24
2350
ps
5
SP12Y-E-150-5-TEE18-48-48
5
18
2359
ps
5
SP8S-E-150-5-PC26-40-3
5
26
1402
ps
5
SP8S-E-200-5-TE30-8-18
5
30
1978
ps
5
VS12b0666-B-150-5-TEE22-25-3
5
22
1217
ps
ps
ps
AWG#
PART/
DRAWING#
VS15L-SS-150-1-PROFIBUS/FC-3M-3M
5
22
2912
5
VS15L-SS-200FR-5-TEE12-24-24
5
12
2385
ps
5
VS22-SS-200-5-TEE8-96-60
5
8
2028
ps
5
VS8-B-80-5-TE22-9T-9T
5
22
1390
ps
6
M24-AL-150-6-HARM20-4-2 KEMA
6
20
950
6
M24-V-150-2/2/2-TE22-6-144/24/6
6
22
1732
ps
6
M24-V-80-6-TE22-625-150MM
6
22
1984
ps
6
PT16-B-80-6-TZ8-12-12
6
8
2180
ps
6
PT16ES31-SG-200-6/2-EE22/RG303-X-Y+24
6
22
0771-1
ps
6
PT16-SS-150-4/2-PC10-22-12-30
4
10
ps
6
PT6-B-80-4-TZ18-30-4T
6
18
2179
ps
6
PT6-SS-80-6-TEE18-6-6
6
18
1720
ps
6
PTN4-B-80-6-PC24-24-24
6
24
1387
ex
sh
2
22
2605
6
PTN8-SS-150-1-METTLER CABLE-360-24
6
28
2723
ps
6
PTN8-SS-150-6-TEE18-60-6
6
18
1619
PS
6
SO6-SS-150-6-G26-18-5
6
26
ps
6
SP11M-E-150-2/4-TE14/18-12-8
2
14
ps
sh
2695
4
18
1678
2
18
2488
6
SP11M-E-150-3TSP-TE20-48-96
6
20
ps
6
SP26-E-150-4/2-XLP8/18-12-24
4
8
ps
6
SP6-E-150-6-TEE28-2-16
6
28
1174
ps
6
SP6-E-150-6-TEE28-25-9
6
28
1812
ps
6
SP6-E-200-3TP-TE26-6-24
6
26
1597
ps
6
SP6-E-200-3TP-TE26-6-24
6
26
1618
ps
6
SP6-E-200-6-TE28-72-72
6
28
1753
ps
hp
2775
6
SP6X-E-150-6-TET32-3SA-12
6
32
1969
ps
6
SP8L-E-150-6-TK24-25-50CM
6
24
2704
ps
6
SP8M-E-150-2TP/1P-TE26/KT24-36
4
26
ps
6
SP8M-E-200-6-TE22-50mm-350mm
6
22
2519
ps
6
SP8M-E-200-6-TE24-100mm-350mm
6
24
2570
ps
6
SP8S-E-150-3P-IPC24-12-12
6
24
889
ps
6
SPF12-E-150-1C/2-4EE22S/EE12-24-35
6
12
699
ps
6
SPF12-E-150-2/4-TEE10/16-24-36
2
10
ps
6
SPF12-E-150-6-TEE18-4-4
6
18
1408
ps
6
SPF12-E-150-6-TZZ18-533-188mm
6
18
2491
ps
6
SPF12-E-150-6-XLPE18-636-188mm
6
18
2563
ps
6
VS12b0666-B-150-6-TEE16-36-3
6
16
1218
ps
2
4
24
16
2895
1830
6
VS12-SS-150-6-TE20-12-12
6
20
1605
sh
6
VS15-SS-150-1-6c-20-19-3.75
6
20
1816
6
VS18-SS-200-6-TEE12-12-12
6
12
1784
hp
6
VS8-B-150-3TP-TE26-6-24
ps
6
VS8-B-80-4/2-TEE28/22-12-12
4
28
ps
6
VS8-B-80-6-pc22-UL1061-240M-275M
6
22
1696
ps
6
VS8-B-80-6-TE26-24-24
6
26
886
ps
6
VS8-SS-80-6-TE24-12-12
6
24
2357
ps
7
PT6-SS-150-7-PC22-24-24
7
22
2492
ps
7
PT8-PS-80-TUBE/C-.25tube/7#26-6-38
7
27
1765
ps
7
PTES31-SG-200-7-E22-24-24
7
22
769
ps
ps
ps
PAVE Catalog.indd 18
Wires
2
5
ps
18
AWG#
ps
ps
sh
PAVE Description Codes. Housing
& wires
26
944
2
22
1815
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:48 PM
PAVE-Seal® Product Index
Type
1
Type
2
Total
Wires
PAVE Description Codes. Housing
& wires
Wires
1
AWG#
Wires
2
ps
rf
2
AWG#
7
SP11M-E-150-2/1-3-TEE18/RG174-TEE26-18-6
5
18
ps
7
SP16-E-150-7-PC14-20-48
7
13
906
ps
7
SP8M-E-80-7-TE22-10-10
7
22
1705
ps
7
SP9/128-E-200-3/2/1-EE16/26/TSP
7
24
1320
ps
7
SPF.56-E-7-TEEE18-24-18
7
18
1254
7
SPF12-E-150-4/1/1-TEE18/2C20/TI
7
18
1136
ps
7
SPF12-E-150-7-TEE20-18-18
7
20
2805
ps
7
SPF12-E-150-7-TZZ20-18-18
7
20
ps
sh
ps
sh
7
SPF12-E-200-1/3TSP-TZ20/24-18-18
1
20
ps
sh
2890
2926
6
24
2100
7
VS8-SS-150-7S-TE26-12-12
7
26
ps
7
VS8-SS-150-7-TEE26-12-12
7
26
ps
8
FL V3280-AL-8-55SPEC14-18-18
8
ps
8
PT4-SS-150-8-TE26-12-12
8
26
ps
8
PT8L-SS-150-6/2-TE16/TE18-12-*
6
16
ps
8
PT8-SS-150-4P-TE24-12-24
8
24
1299
ps
8
PT8-SS-150-8-PC22-72-24
8
22
1329
ps
8
SO12-AL-80-3/5-PC18/26-12-5
3
18
5
26
2438
ps
8
SO12-SS-80-3/5-PC18/26-12-5
3
18
5
26
2437
ps
8
SO12-SS-80-8-TE32-*-X
8
32
2471
ps
8
SO12-SS-80-8-TE32-*-X
8
32
2471
1818
1817
1333
1821
2
18
1448
ps
hp
8
SO8-SS-150-8-TE24/T-24-24
8
24
1521
ps
hp
8
SO8-SS-150-8-TE24-24-24
8
24
1522
ps
8
SP11M-E-150-2/6-TE14/26-80-80CM
2
14
6
26
2078
ps
8
SP11M-E-150-3/5-TE14/TE22-12-12
3
14
5
22
1845
ps
8
SP11M-E-150-3/5-TE14/TE22-7-5
3
14
5
22
2496
ps
8
SP12X-E-150-3/5-TE14/26-12-4
3
14
5
26
2153
ps
8
SP16-E-150-1TSP/2/6-FP20/GXL12/GXL16-47-12
6
16
2
12
2122
PS
8
SP16-E-150-3/5-TEE10/24-24-24
3
10
5
24
2643
ps
8
SP6-E-150-4TP-TE28-24-24(WHT)
8
28
1413
ps
8
SP6-E-200-4TP-TE28-24-24
8
28
1414
ps
8
SP8A-E-150-8-TE24-6-6
8
24
1854
ps
8
SP8-E-80-8-PC26-18-8
8
26
989
ps
8
SP8L-AL-150-8-TE26-18-18
8
26
2274
ps
8
SP8M-E-150-2/6-TEE18/26-12-12
2
18
ps
8
SP8M-E-200-8-TEE26-2-12
8
26
ps
8
SP8S-E-150-2/6-TE22/26-200-200mm
2
22
ps
8
SP8S-E-150-5/3-TE26/TE20-12-12
8
26
1429
ps
8
SP8S-E-150-8-IPC22-24-24
8
22
1846
ps
8
SP8S-E-150-8-TE24-24-24
8
24
ps
8
SPF12-E-150-2/2/4-PC14/24/28-1
2
14
6
28
2396
ps
8
SPF12-E-150-2/2/4-PC14/24/28-10-10
2
14
6
28
2396
ps
8
SPF12-E-150-2/2/4-PC14/24/28-1-1M
2
14
6
28
2396
ps
8
SPF12-E-150-3/5-TE14/28-32-12
3
14
5
28
2509
ps
8
SPF12-E-150-3/5-TEE18/24-12-12
3
18
5
24
2699
ps
8
SPF12-E-150-3/5-TZ16/22-19-5
3
16
5
22
2844
ps
8
SPF12-E-150-8-TEE18-7T-4T
8
18
ps
8
SPF12-E-200-3/5/1P-TEE14/20/KT20-12-48
3
14
5
20
2784
ps
8
SPF12-E-80-8-PC20-15.5-2T
8
20
ps
8
SPF12-E-80-8-PC20-15.5-2T
8
20
2099
ps
8
VS12L-SS-150-2-CABLE 4/#22-6-6
8
22
1800
ps
sh
tc
6
26
2965
6
26
2615
2333
1795
698
2081
8
VS12L-SS-150-4/2P-TEE16/KT24-24-24
4
16
ps
9
FL12-AL-150-9C/PP23-12-33
9
23
4
24
2281
ps
9
PT12-SS-150-9-TE18-12-23
9
18
2165
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 19
PART/
DRAWING#
1952
19
10/27/06 3:24:50 PM
PAVE-Seal® Product Index
Type
1
Type
2
Total
Wires
PAVE Description Codes. Housing
& wires
ps
dsub
Wires
2
AWG#
PART/
DRAWING#
9
PT8-SS-150-1-10C/PC23-DB9-7
9
PT8-SS-150-9-TE22-12-12
9
22
1892
ps
9
PTN12/M20-SS-200-9-TEE18-48-24
9
18
3110
ps
9
PTN12/M20-SS-200-9-TEE18-48-24
9
18
3110
ps
9
PTN12-SS-200-9-TEE18-24-24
9
18
902
ps
9
PTN12-SS-200-9-TEE18-24-48
9
18
1752
ps
9
PTN12-SS-200-9-TEE18-24-48
9
18
1752
ps
9
PTN12-SS-200-9-TEE18-24-48
9
18
1752
ps
9
PTN12-SS-200-9-TEE18-24-48 uses 0073
9
18
902
ps
9
PTN24-PS-150-9-THHN\TEE10-100-11
9
10
367
ps
9
PTN8-SS-200-9-RA22-6-16
9
22
1250
ps
9
PTN8-SS-200-9-TEE18-24-48
9
18
1111
7
26
2046
ps
tc
9
SO12-SS-200-3/4/1P-TE26/24/JT24-250cm-60cm
ps
hp
9
SO16LT-316SS-150-9S-24-24
ps
9
SO16-SS-150-4TP/1-TE28/22-72-36V
9
28
ps
9
SP11-E-4/5-TE18/14-24-24
9
14
1130
sh
9
SP11L-E-150-7/1TSP-TE24-25CM-50CM
9
24
1749
9
SP11L-E-150-9-TE24-25CM-50CM
9
24
1423
hp
9
SP11L-E-150-9-TE26-650MM/800MM-150MM
9
26
3218
ps
9
SP11M-E-80-5/4-TE14/18-24-8/4
5
14
ps
9
SP16-E-150-6/3-TEE18/24-.14M-.31M
9
18
1411
ps
9
SP16-E-150-9-S16-3-7
9
12
940
ps
9
SP20-E-150-9-IPC16-18-18
9
16
1171
ps
9
SP8L-E-150-9-22-SC-SC
9
20
2713
ps
9
SP8L-E-150-9-LAPPWIRE-50CM-50C
9
22
2951
ps
9
SP8L-E-150-9-TE28-24-24
9
28
3179
ps
9
SP8L-E-150-9-TEE26-24-24
9
26
450
9
SP8L-E-150-9-TK24-25CM-50CM
9
24
2170
ps
9
SP8M-E-150-9-K22-80-12
9
22
2414
ps
9
SP8M-E-150-9-PC22-12-12
9
22
2018
ps
9
SP8S-E-200-9-TE24-24-24TE=22759/11
9
24
1357
ps
ps
ps
ps
hp
sh
2
24
1771
1710
1384
4
18
1375
9
SPF12-E-150-7/1-TEE18/2C20-13cm-*
7
18
2
20
ps
9
SPF12-E-200-1/2/3TP-TZ16/20/24-18-18
1
16
8
24
ps
10
M24-V-150-1-10C-PVC22-216-24
10
22
2949
ps
10
M24-V-150-2/2/6-TE22-6-144/24/6
10
22
1731
ps
10
PT12-SS-150-10-TE16-24-72
10
16
ps
10
PT16-SS-80-10-PC12-120-120
10
12
ps
10
PT20-B-80-2/2/1/4/4-TEE8/10/16/18/22-T-*
2
8
ps
10
PT4-SS-80-10-TE26-12-12
10
26
1529
10
SO12-AL-150-10-TE24JS-48-18
10
24
2268
10
SO12-SS-150-10-TEE24-12-12 #1690
10
24
1690
ps
sh
ps
ps
2314
2101
1655
8
SO12-SS-150-3/7-TE24/28-12-12
3
24
SP11.8-E-200-5-5TSJP-E20/24/26-48-56
10
20
ps
10
SP11-E-150-4/6-TE16/TE20-36-6
10
16
870
ps
10
SP11L-E-150-1O-TE24-60-15cm
10
24
2316
ps
28
2431
10
sh
7
10
10
ps
2525
1265
10
SP11M-AL-150-10-TE20-18-18
10
20
2273
10
SP8H-E-200-10-TZ22-12-12
10
22
2102
ps
10
SP8L-E-150-8/2-TZ26/22-500mm-500mm
8
26
ps
10
SPF12-E-150-10-TEEE18-24-18
10
18
ps
hp
ps
2
22
2072
1782
10
SPF12-E-150-3/7-TE20/24-4-4
3
20
7
24
10
SPF12-E-200-2TSP/3TSP-TZ22/TZ26-21-21
4
22
6
26
2226
ps
10
SPF12-E-80-2/8-PC14/22-8-14
2
14
8
22
1895
ps
10
VCR16-E-150-10-TE28-12-12
10
28
ps
PAVE Catalog.indd 20
AWG#
ps
ps
20
Wires
1
sh
831
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:52 PM
PAVE-Seal® Product Index
Type
1
Type
2
ps
rf
ps
ps
weld
ps
ps
ps
Total
Wires
PAVE Description Codes. Housing
& wires
Wires
1
AWG#
10
VS15L-E-150-10-20-3112SP
10
20
2415
10
VS18-SS-150-10-RG178-36-36
10
rg178
2915
20
962
10
W/SMA PLUG CONNECTORS
10
11
0106-AL-150-11-EE20-8-11
11
11
PTW12-SS-150-11-TEE20-7-7
11
20
11
SP11M-E-80-6/2P/2-RPC28/K24S/PC22-18-18
6
28
Wires
2
AWG#
1471-1
429
4
24
2639
11
SPF12-E-150-11-TE20-54-6
11
20
2306
11
VS15L-SS-150-3/1/1/1-4C/2C/2C/3C-6-6
11
22
2447
ps
11
VS16GD16-AL-150-6/5-TE16/20-6-26
6
16
5
20
2282
ps
11
VS16GD16-AL-150-6/5-TE16/20-6-26+
6
16
5
20
2284
ps
12
FL0588-SS-200-12-TEE22-28-7
12
22
586
ps
12
M24-V-150-4/2/6-TE22-6-144/24/6
12
12
1730
ps
12
PT8-SS-150-12-TE26-12-12
12
26
2247
ps
12
PTF12-SS-150-6TP-TE24-12-24
12
24
981
ps
12
PTN12-SS-150-12-TEE16-72-72
12
16
1783
ps
12
PTN12-SS-200-12-TEE18-24-24
12
18
2703
ps
12
PTN12-SS-200-12-TEE18-24-240
12
18
1630
ps
12
PTN12-SS-200-12-TEE18-24-48
12
18
903
ps
12
PTN12-SS-200-12-TEE22-17-17
12
22
2466
ps
12
PTNL16-B-150-12-PC16-12-72
12
16
2171
ps
weld
sh
12
PTW20L-SS-200-6TSP-TE18-36-144
12
18
1703
ps
ps
12
SP11-E-150-12-TEE20-20CM-20CM
12
20
375
ps
12
SP11L-E-150-12-TEE20-60-20CM
12
20
2391
ps
12
SP16-E-150-12-PC18-X-Y
12
18
430
ps
12
SP16-E-150-12-TE20-36-36
12
20
1719
ps
ps
sh
ps
12
SP16-E-150-6/6-PC22/14-4-4
6
22
12
SP16-E-150-6TSP-TE20-48-96
12
20
6
2967
12
SP16-E-200-12-GXL20-50-50cm
12
20
3152
4
14
20
2289
ps
hp
12
SP20-E-150-8/4-TEE10/20-2-2m
8
10
ps
hp
12
SP8H-E-150-12-ET24-12-12
12
24
1792
ps
hp
12
SP8H-E-80-12-PC30-50CM-50CM
12
30
1277
ps
12
SP8L-E-100-6P-TE28-24-105
12
28
1300
ps
12
SP8P-SS-150-12-TEE24-9.5-9.5
12
24
ps
12
SPF12-E-150-10/2-EE24/EE18-12-60
10
24
2
3189
1
740
18
2568
ps
rf
12
SPF12-E-150-11/1-TEE24/RG179-120-30cm
11
24
ps
sh
12
SPF12-E-150-12-TEE22-24TST-36PST
12
22
ps
tc
12
VS10-SS-150--0001 CABLE ASY NO CONN.
12
22
1282
ps
12
VS12L-AL-150-12-Judd24-24-15
12
24
2600
ps
13
PT12-SS-150-9/1-PC18/Alpha9504C-24-24
9
18
ps
13
PT16-SS-150-1-AWC1165-13J-240-72
13
22
1935
ps
13
SO12-SS-150-5/8-PC18/22-10-22
13
18
1160
1385
ps
sh
2366
1829
4
22
2503
13
SO16-SS-150-6TSP/1-TE28/22-72-36V
13
28
ps
13
SP8S-E-150-13-TE28-5-5
13
28
2394
ps
13
VS12L-AL-150-13-TE22-48-48
13
22
2604
ps
13
VS15L-SS-150-4C/4C/3C/2C-6-6
13
22
1424
ps
sh
14
PT16-SS-150-1-14#22-15-6FT
14
22
2892
ps
14
PT16-SS-150-14-TEE22-72-72
14
22
2328
ps
14
PTN16-SS-150-14-TEE22T-72-72
14
22
2904
ps
hp
14
SO12SR-SS-14-TE24-2-36 LO PROFILE
14
24
1210
ps
rf
14
SPF12-E-150-1/2/14-RG179/TE20/TE24-120-6
14
24
2521
ps
14
SPF12-E-80-12/2-TEE28/22-TABLE-3
14
28
1255
ps
14
SPF12-E-80-14-PC28-165-25CM
14
28
1689
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 21
PART/
DRAWING#
21
10/27/06 3:24:55 PM
PAVE-Seal® Product Index
Type
1
Total
Wires
PAVE Description Codes. Housing
& wires
Wires
1
AWG#
ps
14
VS22-304SS-150-14-TZ14-72-24
14
14
ps
14
VS22-SS-150-14-TZ14-168-72
14
14
ps
14
VS22-SS-150-6/8-TEE10/14-72-72
6
10
ps
15
SO12-SS-150-15-TE28-12-12
15
28
3112-1
ps
15
SPF12-E-150-15-TEE22-13-13
15
22
1814
ps
15
VS9CON610-N-15-TE26-6-6
15
26
2244
ps
16
PTN12-SS-200-16-TEE24-8-8
16
24
2004
ps
16
SP11M-E-150-8TP-TE26-72-72
16
26
2923
ps
16
SP26-E-80-1/10/6-RJ45/PC22/16-192-24
10
22
ps
Type
2
2696
2688
8
6
14
16
2276
1965
SP9/128-E-200-8TP-ET24-36-36
16
24
16
SPF12-E-150-16-PC24-18T-6
16
18
1794
ps
16
SPF12-E-80-16-PC28-50-400CM
16
28
1589
ps
16
VS22-304SS-150-16-TZ14-24-96
16
14
3234
ps
16
VS22-304SS-150-16-TZ14-96-24
16
14
17
SPF12-E-150-1/4/12-RG188AU/TE20/24-120-6
16
20
17
SPF16L-E-200-3/3/9/2-TE10/12/14/22-20-30
17
10
18
PTN12-SS-200-1-12W CABLE-10FT
ps
18
PTN16-SS-200-18-TEE18-24-48
ps
18
PTN16-SS-200-18-TEE18-24-48
18
18
2596
ps
18
SO26-PS-150-18-PCC12-130CM
18
12
1275
2859
rf
ps
ps
hp
12
18
1627
3223
1
rf
2903
1243
18
1185-1
18
1801
18
SP11M-E-200-18-TE24-6-24
18
24
PS
19
SO8X-AL-150-19-TZ30-15-15
19
30
2638
ps
19
SP11-E-150-19-TE26-6-6
19
26
843
1516
ps
19
SP11M-E-80-19-TE26-180CM-7CM
19
26
ps
20
PT12-SS-80-20-TEE20-24-24
20
20
ps
20
PT16-SS-200-20-TE16-24-24
20
16
ps
20
SPF12-E-150-20-TE28-24-10
20
28
1947
ps
20
VS12L-SS-80-20-TE28-60-20cm
20
28
2278
ps
20
VS22-SS-150-20-TEE14-48-48
20
14
1932
ps
20
VS26-SS-150-20-TE16-1.2M-1.2M
20
16
915
ps
21
PT16-B-80-21-TE28-12-12
21
28
21
SP11M-E-200-21-TET26-180CM-7CM
21
26
22
PTN20-SS-150-24-K22-60-60, Kapton wire
24
22
3198
22
SP16-E-150-22-HV22-18-18
22
22
2959
ps
22
SPF12-E-150-19/3-PC24/TFCPO15-48-12
22
24
930
ps
24
BPE1.5-SS-150-24-TE22-180-120
24
22
2116
ps
24
SO26L-SS-150-1-CABLE-500FT-6FT
24
18
2045
ps
24
VS26-SS-200-24-TE20-240-240
24
20
2204
ps
25
PT16-SS-200FR-25-#22CABLE-18-18
25
22
1823
ps
25
PT16-SS-80-25-PC22-120T-120T
25
22
1654
ps
25
SP15X-E-150-25-TE26-29-6T
25
26
2571
ps
hp
hp
ps
ps
hv
2149
2298
ps
25
VS32-SS pc & mic cable assembly
25
26
1617
ps
28
SN32-B-28-TPR16-4T-4T
28
16
155
ps
28
VS18-SS-150-12/16-TEE18/26-20-20
12
18
ps
29
SPF12-E-150-29-TEE24-24-24
29
24
19
24
22
ps
tc
29
VS32-SS-150-7/5P/12-TES24/KT20/TE20-360-240
ps
rf
30
005 CABLE 38999x2 15P W/COAX PLUG
30
ps
rf
30
FL1567-AL-150-4/26-COAX/AW29-*-*
4
ps
tc
16
26
1981
10
20
1985
26
29
2270
2251
1852
30
NW40K-SS-150-3P/30-KT24/TE24-108-36
30
24
ps
30
PT16-SS-200-30-TE20-24-24
30
20
2151
ps
30
PT16-SS-200FR-30-#22CABLE-18-18
30
22
1822
30
PTW24-SS-150-30-PC16
30
16
1367
weld
PAVE Catalog.indd 22
PART/
DRAWING#
16
ps
22
AWG#
ps
ps
hp
Wires
2
ps
1509
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:24:59 PM
PAVE-Seal® Product Index
Type
1
Total
Wires
PAVE Description Codes.
Housing & wires
ps
30
SPF18-E-80-30-TF22-15-14
30
22
1733
ps
30
VS15L-SS-150-30-TE30-600mm-600mm
30
30
1701
ps
30
VS18-SS-80-30-TEE24-72-8
30
24
2112
ps
30
VS22-SS-150-30-IPO18-24-72
30
18
1793
ps
32
VS18-SS-200-16P-ET24-96-60
32
24
ps
32
VS22-SS-150-20/4/4P-TEE22/18/22
20
22
ps
33
VS32L-AL-150-33-TE10-480-480
33
10
ps
34
PT6H-SS-200HV-34-TE30-48-48
34
30
2879
ps
35
CF275-SS-150-35-TE24-48-24
35
24
1644
988
ps
Type
2
AWG#
Wires
2
AWG#
PART/
DRAWING#
2759
12
18
1489
0681-2
36
CF275-SS-200-18TSP-TE26-20CM-20CM
36
26
ps
36
VS15L-SS-80-18TP-TE26-48-44
36
26
ps
36
VS22GD22-AL-150-32/4-TE18/20-6-26
32
18
4
20
2285
ps
36
VS22GD22-AL-150-32/4-TE18/20-6-26T
32
18
4
20
2286
ps
37
SO16-SS-150-37-TE28-10-1Ocm
37
28
1612
ps
37
VS18-SS-150-37-TEE20-48-48
37
20
1791
ps
37
VS22GD22-AL-150-32/3/5-TE18/20/22-6-26T
32
18
ps
38
SP16-E-150-38-TE26-36-36
38
26
ps
40
VS22GD22-AL-150-32/3/5-TE18/20/22-6-26
32
18
ps
42
CF275-SS-150-42-TEE22-36-36
42
22
2527
ps
45
VS22-SS-150-45-TEE20-72-72
45
20
1776
ps
46
VS22-SS-150-46-TZ24-106/3-36/31
46
24
2754
ps
50
VS26-SS-150-50-TE20-1M-1M
50
20
2928
ps
52
CF275-SS-200-52-TE24-12-12
52
24
1711
ps
57
VS26-SS-150-57-TE16-48-48 OR -1.2M-1.2M
57
16
914
ps
60
CF275-SS-80-60-TE22-96-96
60
22
2427
ps
60
FLFEI-SS/D-80-25P/4TP/1TP-DB25/TE28/
TE26-DB25-24
60
28
2044
ps
60
VS22-SS-200-60-TE20-72-72 +AMP TERM
60
20
1415
ps
64
FLFEI-SS/D-80-25P/7TP-DB25/E26-
64
26
ps
64
NW40KF40-SS-150-32TSP-CWNMUF-96-36
64
ps
sh
Wires
1
5
22
2301
8
22
2283
2467
1674
1510
64
SP20-E-200-70-TE26-8-8
64
26
ps
65
CF275-SS-150-65-TEE22-12-12
65
22
ps
69
VS32L-AL-150-69-TE12-480-480
69
12
ps
71
SP25Y-E-150-65/3P-TEE28/KT30-240-24
65
28
6
30
2502
71
SP25Y-E-150-65/3P-TEE28/KT30-240-24
65
28
6
30
2502
75
VS22-SS-150-25/50-TE20/24-24-24
25
20
50
24
2130
ps
hp
1477
hp
ps
1707
0681-1
ps
sh
76
VS32L-AL-150-38TSP-TE20-480-480
76
20
0681-4
ps
sh
84
SP26-E-150-42TSP-TE28-36-36
84
28
2722
ps
90
VS26-SS-150-90-TE28-24-24
90
28
1785
ps
100
VS26-SS-150-100-TE22-48-20
100
22
1400
ps
104
VS31-B-150-104-TE24T
104
24
1336
160
VS32-SS-80-80TSP-TE22-48-36
160
22
1613
ps
190
VS32-SS-150-95TP-TE20
190
20
1496
ps
220
VS32-SS-150-110TP-TE24/22/20
220
24
1497
ps
300
VS32-SS-200-300-TE22-36-36
300
22
479
ps
300
VS32-SS-90-300-TE22-60-400CM
300
22
ps
340
VS32-SS-150-340-TE22-600MM-4000MM
340
22
2300
ps
524
VS32-SS-150-524-TE24-36-84
524
24
2489
ps
540
FL0531-SS-80-266TP-TE24-18T-360T
540
24
530
ps
900
ASA11-SS-150-900/1-TE20/T-60-60
900
20
1681
ps
900
FLASA11-SS-150-900-TE20-60-60
900
20
1501
ps
sh
Visit www.PAVEtechnologyCo.com for updated information
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 23
23
10/27/06 3:25:03 PM
PAVE - Mate® I
PAVE-Mate I is a bulkhead, multi-contact connector with various
styles of high performance mil-spec based or industrial electroless
nickel plated aluminum, plastic or stainless steel shell disconnects
that can be disconnected on either side of the bulkhead.
Signal, power, coaxial, thermocouple and fiber optic versions
are available for high vacuum use or up to low or highpressure applications. PAVE-Mate I style connectors have
dual sided disconnects with male pins on hex side and
female sockets on thread side. Mating connector plugs
are supplied. Contacts are copper or brass, gold or silverplated, #22 AWG (5 amps), #20 (7A), #16 (13A), #12 (23A),
#8 (60A) and #4 (100A). Typically 600V rated minimum
with ratings up to 1300 VDC available. Selected contact
arrangements offer low outgassing in high vacuum
mating connector plugs with either epoxy, Viton or
dialyll phythalate inserts instead of neoprene.
In-line PAVE-Mate I style allow for the mating connectors to be
connected without the bulkhead PAVE-Mate connector
being present. Most contacts for the mating plugs are
loose crimp contacts, though both solder cup contacts
and crimp contacts are normally available. Crimp, insertion
and removal tools for contacts are also available.
Pressure ratings from 10-8 Torr up to 100 bar (1500 psi)
For high pressures above 20 bar (300 psi), the face-seal O-ring must be on the high pressure side.
See Website Quick Ship Price List
PAVE-Mate® I #1964
VS26 size with 7 #8 contacts
Up to 60 amps per contact
Threaded coupling
PAVE-Mate® I #1837
VS18 size with 8 #16 contacts
Up to 13 amps per contact
Bayonet coupling
24
PAVE Catalog.indd 24
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:25:06 PM
PAVE - Mate® I
Dimensions in inches [mm]
PAVE-Mate® I #1656
VS15L size with
10 #20 contacts
Up to 7 amps per contact
Bayonet coupling
PAVE-Mate® I #1530-1
VS26 size with
12 #12 contacts
Up to 23 amps per contact
Threaded coupling
PAVE-Mate® I #1667
VS22 size with
21 #16 contacts
Up to 13 amps per contact
Bayonet coupling
PAVE-Mate® I #1637-1
VS18 size with
26 #20 contacts
Up to 7 amps per contact
Low outgassing epoxy inserts
standard Bayonet coupling
PAVE-Mate® I #1583
VS26 size with
37 #16 contacts
Up to 13 amps per contact
Threaded coupling
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 25
25
10/27/06 3:25:10 PM
PAVE - Mate® I
Dimensions in inches [mm]
PAVE-Mate® I #1525
VS18 size with
37 #22 contacts
Up to 5 amps per contact
Threaded coupling
PAVE-Mate® I #1669
VS32 size with
48 #16 contacts
Up to 13 amps per contact
Threaded coupling
PAVE-Mate® I #1670
VS22 size with
55 #20 contacts
Up to 7 amps per contact
Bayonet coupling
PAVE-Mate® I #1671
VS26 size with
61 #20 contacts
Up to 7 amps per contact
Bayonet coupling
PAVE-Mate® I #1491
VS22 size with
79 #22 contacts
Up to 5 amps per contact
Threaded coupling
26
PAVE Catalog.indd 26
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:25:13 PM
PAVE - Mate® I
Dimensions in inches [mm]
PAVE-Mate® I #0642
VS32 size with
128 #22 contacts
Up to 5 amps per contact
Threaded coupling
PAVE-Mate® I #2581
1/16" NPT size with
4 #24 contacts
Up to 2 amps per contact
Vacuum to 700 bar (10,000 psi)
Push-pull friction lock coupling
Pushthru PAVE-Mate® I
Glovebox Connectors
Type
1
Type 2
pm1
pm1
Type
3
Pin
AWG#
1092
1046
1000
1061
1074
1082
1020
1083
0,64
0,81
1,29
2,05
0,81
INSTALLATION PORT
24
R.945
+0.25
0
+.01
1.25
- .00
31.75
63.44
2.5
63.44
2.5
12.70
3.96
.500
.156
32
44.45
1.75
68.63
2.70
105.84
4.2
PAVE-Mate® I Product Index
by Stock Items, then Total Conductors
Conductors
1
AWG#
Conductors
2
AWG#
Total
Conductors
Description Code
stock
7
stock
7
8
7
VS26-SS-150-7-8-3102PS
1964
8
7
VS26-SS-150-7-8-3102PS(AU)
2029
pm1
stock
8
16
8
VS18-E-150-8-16-3112PS
1837
pm1
stock
10
20
10
VS15L-E-150-10-20-3112PS
1656
pm1
stock
12
12
12
VS26-SS-150-12-12-3102PS
1530
pm1
stock
21
16
21
VS22-E-150-21-16-3112PS
1667
pm1
stock
26
20
26
VS18-E-150-26-20-3112PSV
1637-1
pm1
stock
37
22
37
VS18-SS-200-37-22-99920PS(V)
1525
pm1
stock
37
16
37
VS26-E-150-37-16-3102PS
1583
pm1
stock
48
16
48
VS32-E-150-48-16-3102PS
1669
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 27
Pin Dia.
Dwg. Part#
mm
US Patent 4,666,228
37
22
19
20
7
16
3
12
19
#20 K T/C
COAXIAL
MHV
PLUG
Solid SS
Fiber Optics SMA 12
The all stainless steel or lower
cost aluminum version Pushthru
PAVE-Mate connectors are
designed for gloveboxes and
other potentially hazardous
chemical or pharmaceutical
processes that may require the
periodic safe replacement of the
connector without potential
exposure to personnel by
“losing” the hermetic seal during
the replacement operation.
The replacement epoxy molded
connector “core” pushes the
original connector core into the
chamber and then locks into
place. With the unique double
O-ring design, an O-ring seal is
always maintained during this
operation. Fluorocarbon O-rings
are supplied.
Refer to page 13 for
Description Code Breakdown
and Type Codes
Total Pins
Part/
Drawing #
27
10/27/06 3:25:17 PM
PAVE - Mate® I
Type
1
Type 2
pm1
Type
3
Conductors
1
AWG#
stock
55
pm1
stock
pm1
stock
pm1
stock
Conductors
2
AWG#
Total
Conductors
Description Code
Part/
Drawing #
20
55
VS22-E-150-55-20-3112PS
1670
61
20
61
VS26-E-150-61-20-3112PS
1671
79
22
79
VS22-SS-150-79-22-99920PS
1491
642
128
22
128
VS32-SS-150-128-22-99920PS
pm1
4
28
4
PT1-SS-200-4-.028Cu-QD
1125
pm1
3
20
3
PT12-B-150-3-20-3112
1331
pm1
3
12
3
PUSHTHRU ASSY 5015 3#12
PT-1061
pm1
3
20
3
VS12L-SS-150-3-20-3112PS
1772
pm1
3
16
3
VS15L-E-150-3-16-3112PS
2167
pm1
3
20
3
VS15L-SS-150-3-20-3112PS
1956
pm1
3
12
3
VS18-SS-150-3-12-3102PS
1780
pm1
4
26
4
PT1-C276-200-4-.028Cu-QD
2581L
2581
pm1
Pushthru
4
26
4
PT1-C276-200-4-.028Cu-QD
pm1
4
14
4
SO16-SS-200-4-14-T-T (T=.250 TABS)
2091
pm1
4
20
4
VS15L-SS-150-4-20-3112PS
2681
pm1
4
12
4
VS22-E-150-4-12-3102PS
1855
pm1
4
12
4
VS22-E-150-4-12-3102SP
1855-R
pm1
4
8
4
VS22-E-150-4-8-3102PS
1863
pm1
4
8
4
VS26-SS-150-4-8-3102PS
2403
pm1
4
4
4
VS32-SS-150-4-4-3102PS
2401
pm1
5
16
5
PT16-SS-150-5-16-3102PS
1395
pm1
5
16
5
VS18-E-150-5-16-3112PS
2084
pm1
5
16
5
VS18-SS-150-5-16-3102PS
2418
2743
pm1
hp
5
16
5
VS26-SS-150-5-16-999PS
pm1
6
20
6
PT12-B-150-6-20-3112 PMI
1332
pm1
6
22
6
PT8-SS-150-6-22-38999/20PS
1297
pm1
6
20
6
VS15L-E-150-6-20-3112PSVNP
1897
pm1
6
20
6
VS15L-SS-150-6-20-3112PS
1722
pm1
6
20
6
VS15L-SS-150-6-20-3112PW-SN-(NP)
1891
pm1
6
20
6
VS15L-SS-150-6-20-3112SP
1564
pm1
6
16
6
VS22-SS-150-6-16-3102PS(NP)
2059
7
16
7
VS18P-SS-150-7-16-QDC
PT-1009
pm1
8
20
8
VS15L-E-150-8-20-3112PS
1797
pm1
8
16
8
VS18-SS-150-8-16-3112PS
1715
pm1
8
12
8
VS26-E-150-8-12-3102PS
2573
pm1
10
20
10
VS15-E-150-10-20-3112PS
1665
pm1
10
20
10
VS15-E-150-10-20-3112PS(NP)
1665
pm1
10
20
10
VS15L-E-150-10-20-3112PSW
1656W
pm1
10
20
10
VS18-SS-150-10-20-3112PS
1864
pm1
10
16
10
VS22-SS-150-10-16-3102PS
1481
pm1
12
12
12
SO26-SS-150-12-12-QDC-QDC-NP
641
pm1
14
20
14
VS15L-E-150-14-20-3112PS
1684
pm1
pm1
inline
Pushthru
12
8
2
16
14
VS32-SS-150-12/2-8/16-3102SP(NP)
1758
pm1
hp
14
20
1
16
15
VS18-E-150-14/1-20/16-3112PS
1713
pm1
18
20
18
PT16-B-80-18-20-3112PS(NP)
2398
pm1
19
20
19
VS18-E-150-19-20-3112PS
1651
pm1
19
20
19
VS18-E-150-19-20-3112SP
1611
19
20
19
VS18P-SS-150-19-20PS PUSHTHRU
1046
pm1
19
20
19
VS18-SS-150-19-20 PUSHTHRU ASSY
37 PIN 22 AWG
1047
pm1
19
20
19
VS18-SS-150-19-20-3112PS
1721
pm1
19
20
19
VS18-SS-80-19-20-3112P-SC
1547
pm1
19
16
19
VS22-E-150-19-16-3102PS
2173
19
12
19
VS32-SS-150-19-12-27466PS
2738
19
12
19
VS32-SS-150-19-12-99920PSN
1662-N
pm1
pm1
pm1
28
PAVE Catalog.indd 28
Pushthru
inline
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:25:22 PM
PAVE - Mate® I
Type
1
Conductors
1
AWG#
Total
Conductors
Description Code
pm1
21
16
21
CF275-SS-80-21-16-3112PS
pm1
pm1
21
16
21
V626-SS-150-21-16-3112PS
21
16
21
VS26FLT-SS-200FR-21-16-99920SPB
2232
pm1
22
22
22
VS18-SS-150-22-22-99920SPN
1661-N
pm1
18
16
4
12
22
VS26-E-150-18/4-16/12-3102PS (NP)
2329
pm1
1
16
22
20
23
VS18-E-150-1/22-16/20-3112NP
2671
pm1
24
16
24
VS26-SS-150-24-16-3102PS
1482
pm1
26
20
26
CF275-SS-80-26-20-3112PS
pm1
26
20
26
VS18-E-150-26-20-3112PS
pm1
26
20
26
VS18-E-150-26-20-3112PS (CRIMP)
1637-3
pm1
26
20
26
VS18-E-150-26-20-3112PSE
2510
pm1
26
20
26
VS18-E-150-26-20-3112PSV VITON
1637
pm1
26
20
26
VS18-SS-150-26-20-3112PS
1723
pm1
26
16
26
VS26-E-150-26-16-3102PS
2572
26
20
26
VS26-SS-150-26-20-27466PS
2739
pm1
31
16
31
VS26-E-150-31-16-3112PS
1957
pm1
32
20
32
VS22-SS-150-32-20-3112PS
1848
pm1
32
20
pm1
28
16
pm1
Type 2
inline
Type
3
Conductors
2
7
AWG#
12
2401
1647
32
VS22-SS-150-32-20-3112PS
1848NP
35
VS32-E-150-28/7-16/12-3102PS(NP)
1958
pm1
Pushthru
37
22
37
38999/III 37 #22 SS receptacles molded
epoxy Pushthru core
1958
pm1
inline
37
22
37
VS26-SS-150-37-22-999PS
2744
37
16
37
VS32-SS-150-37-16-3102SP(NP)
1759
37
20
2
16
39
VS26-SS-150-37/2-20/16-999PS
2742
pm1
27
20
14
16
41
VS22-E-150-27/14-20/16-3112PS
1490
pm1
27
20
14
16
41
VS22-SS-150-27/14-20/16-3112PS
1777
pm1
41
20
41
VS22-SS-150-41-20-3112PS
1691
pm1
41
20
41
VS22-SS-150-41-20-3112PS(NP)
1691NP
pm1
pm1
inline
pm1
pm1
inline
pm1
pm1
27
20
41
VS26-SS-150-27/14-20/16-3112PS
1490?
41
20
14
16
41
VS26-SS-150-41-20-27466PS
2735
48
16
48
VS32-SS-150-48-16-3102PS(A95)
goldplated
2397
55
22
55
VS26FLT-SS-200FR-55-22-99920SPA
2231
pm1
inline
55
20
55
VS26-SS-150-55-20-27466PS
2732
pm1
inline
55
20
55
VS26-SS-150-55-20-3470PS
2733
55
20
55
VS26-SS-150-55-20-40FH55SPN
1781
2745
pm1
pm1
inline
55
22
55
VS26-SS-150-55-22-2746PS
pm1
inline
61
20
61
VS26-SS-150-61-20- 3470PS
2734
pm1
inline
61
20
61
VS26-SS-150-61-20-27472PS
2731
pm1
inline
61
20
61
VS32-SS-150-61-20-27466PS
2730
pm1
inline
66
22
66
VS26-SS-150-66-22-27466PS
2736
79
22
79
VS22-SS-150-79-22-99920SP
1492
pm1
pm1
inline
79
22
79
VS26-SS-150-79-22-27466PS
2740
pm1
inline
79
22
79
VS26-SS-150-79-22-27472PS
2737
pm1
inline
79
22
79
VS26-SS-150-79-22-999PS
2727
100
22
100
VS26FLT-SS-200FR-100-22-99920SPC
2233
inline
100
22
100
VS26-SS-150-100-22-27466PS
2728
100
22
100
VS26-SS-150-100-22-27466PS
2728
pm1
inline
100
22
100
VS26-SS-150-100-22-27472PS
2741
pm1
inline
100
22
100
VS26-SS-150-100-22-27472PS
2741
pm1
inline
100
22
100
VS26-SS-150-100-22-27472PS
2729
100
22
100
VS26-SS-150-100-22-40fh35sp*
2937
inline
100
22
100
VS26-SS-150-100-22-999PS
2726
pm1
128
22
128
VS26-SS-150-128-22-40FJ35SP
2936
pm2
128
24
128
VS32-SS-150-128-TE24-99920SN-20
1780R
pm1
pm1
pm1
pm1
pm1
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 29
Part/
Drawing #
29
10/27/06 3:25:25 PM
PAVE - Mate® II Connectors
PAVE-Mate® II has a single disconnect on one side and
pre-wired with any type insulated wire or cable for any length.
Signal, power, coaxial, thermocouple, high voltage and fiber
optic versions are available.
Any connector series or type including circular or rectangular
can be ordered either as a PAVE-Mate style, including both high
performance military or economical industrial metal, or plastic
shell multi-pin connectors.
Pressure rating from high vacuum (10-8 Torr) to pressures to 100 bar (1500 psi).
Dimensions in inches [mm]
PAVE-Mate® II #1666
VS12L size with
13 #22 contacts & Teflon wires
Up to 5 amps per pin/wire
Bayonet coupling
In-stock Quick Ship Product
PAVE-Mate® II #0267
3 #12 125V 15 amps
Standard UL wall outlet receptacle
Vacuum to 5 bar (75 psi)
PAVE-Mate® II #3114
PT24 1-1/2" NPT size
Up to 7 amps per wire
55 #20 Teflon wires
30
PAVE Catalog.indd 30
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:25:29 PM
PAVE - Mate® II Connectors
Dimensions in inches [mm]
PAVE-Mate® II #2635
Low profile, fits any
Jam nut with O-ring
Seals in standard MIL-Spec
D-shaped port
Multiple coaxial and signal wires
and pins
1 1/4-20UN-2A
ATMOSPHERE
PRESSURE
1.73
PAVE-Mate® II #2934
Reversed engineered BIW
Type connector
.06 MAXIMUM OVER/UNDER FILL
1.50
+.062
.013
- .013
.1
.25
1.2
1" NPT
) 2.6(
126 MINIMUM
32
VS7 INSTALLATION PORT
PAVE-Mate® #3206
ATMOSPHERE
PRESSURE
13.61±0.03
.536±.001
Button switch hermetically sealed
Vacuum to 1 bar (15 psi)
3.00
1.52
.118
.060
Refer to page 13 for
Description Code Breakdown
and Type Codes
Type
1
Type
2
pm2
pm2
Type
3
PAVE - Mate® II Product Index
by Total Conductors
Conductors
1
AWG#
stock
13
22
sc
3
pm2
Conductors
2
AWG#
Total
Conductors
Description Code
Part/
Drawing #
13
VS12L-AL-150-13-TE22-27508P-48
1666
3
PT8-SS-150-3-20-16SC-3112S
1211
0665-1
4
22
4
PT6-SS-150-4-PC22-QDB-48
4
22
4
PT6-SS-80-4-TE26-8-SC
953
pm2
4
20
4
PT8-SS-150-4-PC20-3112P-12
1686
pm2
4
26
4
VS8SX-SS-150-4-26-SC-QD
2873
pm2
6
26
6
FL1741-SS-150-3TP-TE26-RM12BRD-15
1745
pm2
6
20
6
NW25-SS-80-6-20-3112E10-6P-P
1695
6
20
6
PT4S-SS-150-6-20-3112P(SOC)
949
6
24
6
SO8M-SS-150-6-24-QD-SC
1922
6
20
6
SP16M-E-150-6-20-3112PS-SC
1203
6
22
6
VS12-AL-150-6-TE22-27508P-8
2168
7
20
7
VS15L-SS-150-7-20-SC-40FB99PN
1537
pm2
8
24
8
PLUG/CABLE ASY & SEALED RCPT ASY
1862
pm2
8
26
8
PT8-SS-150-8-TE26-99920P-36
3168
pm2
8
16
8
VS18-SS-150-8-PC16-3112P-24
3263
pm2
8
16
8
VS18-SS-150-8-TEE16-3112P-24
2666
pm2
8
12
8
VS22-SS-150-8-TEE12-3470LP-48
1770
pm2
8
12
8
VS22-SS-200-8-TEE12-3102P-24
1335
pm2
8
8
8
VS22-SS-200-8-TEE8-99920P-300 &
265FJ8S-8-TEE8-120
2203
pm2
9
28
9
9 PIN D-SUB W/72 INCHES RIBBON
960-1
pm2
sc
pm2
sc
pm2
sc
pm2
pm2
pm2
sc
hp
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 31
31
10/27/06 3:25:35 PM
PAVE - Mate® II Connectors
Type
1
Type
2
Type
3
Conductors
1
AWG#
Conductors
2
AWG#
Total
Conductors
Description Code
Part/
Drawing #
pm2
9
28
9
9 PIN D-SUB W/72 INCHES RIBBON
960-2
pm2
10
22
10
FL4.8-SS-150-10-TEE22-QDB-20
985
pm2
10
16
10
PT16-SS-150-10-EE16-126-BIW12#
2934
pm2
10
20
10
SO16-SS-80-10-TE20-3112S-360(NP)
2555
pm2
10
20
10
VS15L-SS-150-10-TE20-480-3112P
1412
pm2
10
20
10
VS15L-SS-80-10-TE20-3112P-36
1585
pm2
11
12
11
CF275-SS-150-11-TE12-18-27508P(V)
2432
pm2
13
22
13
SP16E-N-150-13-PC22-MOLEX-1
2865
pm2
stock
13
22
13
VS12L-AL-150-13-TE22-27508P-48
1666
pm2
sc
13
22
13
VS15L-SS-150-13-40FB35PC-SC
1542
14
16
14
SO22-PS-105-14-PC16-3102S-54 NP
548
pm2
pm2
rf
16
20
16
D38999/23Y*-E-150-6/10-RG179/TZ24P247PS1
2635
pm2
rf
16
rg316
16
VS22-SS-150-16-RG316-240-40FG1
3199
pm2
rf
rg179
16
VS26-SS-150-16C-RG179-240-40FG
2887
17
SP20-E-150-16/1-COAX/TE24-#22P-18
2948
pm2
16
pm2
18
20
18
VS18-SS-150-18-TE20-3112P-120NP
1672
pm2
19
20
19
VS18-SS-150-19-TE20-3112S-120NP
1607
pm2
22
22
22
SO12L-22-TE26-20KC35SN-40
1393
pm2
22
26
22
SO12L-316SS-22-TE26-20KC35SN-40
1393
pm2
22
22
22
VS15L-SS-150-22-TE22-180-40FC35PN
1539
pm2
22
22
22
VS15L-SS-150-22-TE22-180-40FC35SN
1541
PM2
26
20
26
SPF20L-AL-150-26-20-PC01-SC
2608
pm2
26
20
26
VS18-SS-150-26-TEE20-3112P-36NP
1876
pm2
26
20
26
VS18S-SS-150-26-TE20-3112P-12
1616
pm2
27
30
27
PCB 27 PINS NICOMATIC
2506
sh
32
20
32
PT16-SS-200-10TSP-TE20-3471P-96
1995
37
22
37
CABLE ASY 2000581-011
811
sh
40
20
40
VS26-SS-200-41-20TPS-3112P-300 &
MS3475L2>0-20TPS-120
2206
pm2
41
20
41
PT24-PS-150-41-TE20-3112P-72
1751
pm2
41
20
41
VS22-SS-150-41-20-3112S-48
1769
pm2
55
24
55
PT24-PS-150-55-TE24-3112P-60
3114
pm2
55
22
55
VS18-SS-150-55-TE22-180-40FE35
2882
pm2
55
20
55
VS22-SS-150-55-TEE20-3112P-24
2201
pm2
64
26
64
FEI-SS/D-80-25P/7TP-DB25-E26
2433
pm2
64
26
64
FEI-SS-80-25P/7TP-DB25/TE26-4-*
1869
pm2
64
26
64
FLFEI-SS/D-80-25P/7TP-DB25/E26
1677-1
pm2
64
26
64
FLFEI-SS-80-25P/7TP-DB25/TE26-4-*
2436
pm2
66
22
66
VS22-SS-150-66-TE22-180-40FF35
2886
pm2
79
22
79
VS22-SS-150-79-TE22-27508<10
1953
pm2
112
112
VS26-150-112-PTFE7-QDC-20
882
pm2
pm2
pm2
1
DESCRIPTION CODE BREAKDOWN
HOUSING
PART
SEE PAGES
6-10
HOUSING
MATERIAL
coax
Note: stock items are subject to change. Please check website for most current updates.
UPPER
PAVE-SEAL®
TEMPERATURE
RATING
°C
NUMBER OF
WIRES
YOUR CHOICE
OPTIONS
PT
SO
VS
CF
SP
32
PAVE Catalog.indd 32
B = Brass
SS = Stainless Steel
PS = Plated Steel
AL = Aluminum
E = Epoxy Molded
150
200
200FR
1 thru?
P = pair (ie,tc)
TP = twisted pair
TSP = twisted
shielded
pair
WIRE
INSULATION
AND GAGE
PC = PVC insulated
TE = Teflon insulated
TZ = Tefzel insulated
JT = J thermocouple
KT = K thermocouple
ET = E thermocouple
TT = T thermocouple
WIRE LENGTH
ON LEFT OR
HEX SIDE
METRIC OR
ENGLISH
WIRE LENGTH
ON RIGHT OR
THREAD SIDE
METRIC OR
ENGLISH
• Indicate inches, feet, millimeters,
or meters.
• Unlimited lengths.
• Options include end stripping,
tinning, or terminations.
• Thermocouple wire is Teflon
insulated with #20 and #24
standard sizes.
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:25:44 PM
Frequently Asked Questions
Please visit www.PAVEtechnologyCo.com to find the
answers to these and more frequently asked questions.
1. Where can I find a complete catalog of PAVE-Seal
and PAVE-Mate installation instructions?
6. Are there other PAVE-Mate connector pin arrangements
not shown in the catalog?
2. Do the the PAVE-Seal versions with insulated and
stranded conductors have a much higher leak rate
compared to the PAVE-Mate styles with solid pins?
7. Where can I find all of the contact arrangements
lettering or numbering?
3. What are the available circular connector contact or
pin arrangements available as PAVE-Mate connectors
that connect to MIL-Spec or commercial connectors?
4. Where can I find assembly instructions for the following
PAVE-Mate connector pin and wire assemblies?
– MIL-C-26482 Series II, PAVE 3112
– MIL-C-38999, PAVE 38999 style
– MIL-DTL-5015, PAVE 3102 style
8. How do I find out what PAVE hermetic seals are
currently in stock or can otherwise ship quickly?
9. Does PAVE have any test data from a recognized
laboratory, such as NASA, that demonstrates that
PAVE epoxy sealants have very low vacuum out
gassing characteristics?
10. Does PAVE offer special cleanliness and packaging
processes to further reduce any high vacuum
outgassing?
5. Can I order additional mating plugs or contacts for the
PAVE-Mate series?
11. Does PAVE offer special high vacuum low outgassing
connectors in its dual sided PAVE-Mate I connector line?
Standard Circular Connectors
Visit www.PAVEtechnologyCo.com and select the Tools link to view the available circular
connector contact or pin arrangements that connect to MIL-Spec or commercial connectors.
Virtually any Mil-Spec or commercial non-hermetic connector can be converted
by PAVE into a reliable, cost effective hermetic connector seal upon request.
Typical Amperage Ratings by Copper Wire Gage or Diameter
105°C PVC or 200°C Teflon insulation.
Any type or size wire or cable may be specified to any length.
UL, SAE/MIL-Spec, CSA rated wire also available.
Wire Conductor Gage
AWG
O.D.
Amperage
Rating
Nominal Insulation
Overall Diameter (O.D)
30
0,30 mm
2
.03”
0,8 mm
28
0,40
2
.04
1,0
26
0,50
3
.05
1,3
24
0,60
3
.06
1,5
22
0,78
4
.06
1,5
20
0,90
6
.07
1,8
18
1,21
8
.08
2,0
16
1,50
10
.09
2,3
14
1,85
18
.11
2,8
12
2,40
25
.12
3,0
10
2,94
40
.16
4,1
8
3,73
60
.21
5,3
6
4,67
80
.26
6,6
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 33
33
10/27/06 3:25:50 PM
D-Sub, Micro-D, and Nano Rectangular
PAVE-Mate® Connectors
Both PAVE-Mate I (dual sided disconnects) or PAVE-Mate II
(single sided disconnect with either insulated Teflon wires leads
or solid bar conductor PCB leads) styles are available in all
contact arrangements for standard density, high density,
micro D and Nano contact density rectangular connector
arrangements from 9 to 100 pins. In addition, special double
connector arrangements are also available to achieve a higher
contact density in a compact single installation port.
Male pin and/or female socket contacts hermetic connector versions are readily available.
More detailed drawings available at www.PAVEtechnologyCo.com
Dimensions in inches [mm]
ATMOSPHERE
PRESSURE
.096
.050
.50
OVER/UNDER FILL
THIS SIDE .06
PAVE-Mate® II #0960
2x
32
.81
.120
POLARITY STRIPE TO
PIN 1 FOR 0960-2
O-ring face seal
9 #28 contacts and flat cable
Vacuum to 10 bar (150 psi)
4x R.083
1.39
.984 .806
1.52
.1
POLARITY STRIPE TO
PIN 1 FOR 0960-1
72 MINIMUM
.68
O-RING NOT SHOWN
THIS VIEW
.449
INSTALLATION PORT
(1/16" THICK BULKHEAD)
ATMOSPHERE VACUUM
PAVE-Mate® II #2299
2X
LEAK TEST PORT
4-40 UNC-2B x 0.25
2.390
1.852
4X
2X
O-ring face seal, std dsub
25 #20 Teflon wires and contacts
Up to 7 amps per wire
High vacuum to 10 bar (150 psi)
R0.15
0.125
(1.534)
PIN #1
4X
0.38
0.25
0.025
2.390
2X
.405 -0.000
2X
1.48
MINIMUM
A
±0.004
Ø0.156
+0.010
0.480
0.1
MAXIMUM
MINIMUM
PIN #14
+0.010
-0.000
1.505
(R0.104)
0.730
0.385
R0.125
32
1.600
2.653
(0.25)
6-32 UNC-2B x 0.31
0.460
3.00±.01
O-ring face seal
62 #25 contacts of pcb posts
High vacuum to 10 bar (150 psi)
VACUUM
INSTALLATION PORT
32
ATMOSPHERE
PAVE-Mate® II #2676
2x
.136 THRU
3.30±.04
.050±.003
.20±.06
.02 OVERHANG
OF SS PLATE
.46±.03
.090
2.20±.01
EPOXY EXTRUSION
.445±.010
.480±.015
GROOVE
.40±.01
EPOXY EXTRUSION
.85±.04
.46±.04
2.280±.015
GROOVE
3.00±.01
2.245±.010
2x 4-40 UNC
32
.55
.45
.62
.52
34
PAVE Catalog.indd 34
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:25:57 PM
D-Sub, Micro-D, and Nano Rectangular
PAVE-Mate® Connectors
Dimensions in inches [mm]
ATMOSPHERE
®
PAVE#2748-1 SHIPPED MOUNTED TO A NW50 FLANGE
VACUUM
32
.72
PAVE-Mate I #2748
R.070
O-ring face seal
9 #20 contacts, std d-sub
High vacuum to 10 bar (150 psi)
1.450
32
2.080
4x
.06
1.575±.010
.69
NOT INCLUDING
OVERFILL IN GAP
Refer to page 13 for
Description Code Breakdown
and Type Codes
Type
3
dsub
pm2
stock
dsub
pm1
dsub
pm1
dsub
dsub
32
6±0.25
.236±.010
16
INSTALLATION PORT
10.36±1.02
.41±.04
13
.51
4x
Type
2
+0.10
- 0.05
+.004
.046
- .002
57.81
2.28
3.45±0.08
.136±.003
1.830
1.16
.04
31.87
1.255
1.53±.01
4x#6-32 UNC . 3 MIN
DO NOT BREAK THRU
VACUUM
52.31
2.059
37.37
1.47
1.43
.39
.06 OVER/UNDERFILL IN GAP
BETWEEN CONNECTOR & HOUSING
PAVE-Mate® I #2575
.44±.01 .650
.34 .481±.010
CONNECTOR CENTERED .06
TO CENTER OF HOUSING
.25±.01
NO JACKPOSTS
THIS SIDE SEE
NOTE 8
4x
INSTALLATION PORT
. 65 0
ATMOSPHERE
O-ring face seal
102 #25 contacts, micro d-sub
High vacuum to 10 bar (150 psi)
+.004
- .002
.090
ALL AROUND
.9 0 0
4x
1.450
R.030
1.830
+.005
.140
- .000
36.20
1.43
1.52
R.060
37.59
1.480
16
22.86
.900
21.66
.85
5.03
.198
.015
17.50
.69
.039
31.87
1.255
52.31
2.059
D-Sub Product Index
by Stock Item, then Total Conductors
Total
Conductors
Description Code
Part/
Drawing #
20
25
DSUB25-AL-150-4/21-E20/24-DSUB25-24
2299
20
9
CF275-SS-150-9-DSUB-PLUG-RCPT
807
9
20
9
CF275-SS-150-9-DSUB-RCPT-PLUG
804
pm2
9
22
9
FL-AL-80-9-TE22-DSUB-12
960
pm1
9
20
9
SP30/13-E-150-9-20-DSUB-DSUB
2748
dsub
pm2
15
26
15
SP16/6-AL-150-15-TE26-30CM-83513
3232
dsub
pm1
15
22
15
SP30/13-E-150-15-22-DSUB-DSUB
2749
dsub
sh
18
28
18
FLFEI1.75-AL-150-18S/1-ET28/COAX-12
2280
dsub
pm2
21
30
21
FLMIRCOD-E-150-21-TZ30-7-0 rectangular
2191
dsub
pm2
25
30
25
LWF-AL-150-25-30-NANOMICS-.5
2224
44
22
44
FL-AL-150-44-22-DSUB-DSUB
3151
dsub
rf
weld
Conductors
1
AWG#
25
9
Conductors
2
AWG#
dsub
pm2
51
26
51
FLSP31/10-E-80-51-PIN-M8351303/G05N-0.37
2522
dsub
pm2
51
26
51
SP31/10-E-80-51-E26-24-M8351301/GN
2557
dsub
pm1
51
25
51
SP33/14-AL-150-51-25-M83513
3142-1
dsub
pm2
62
24
62
SP48/15-E-150-62-BARE24T-DSUB-.05
2676
dsub
pm1
70
26
70
EdgecardTBL-E-150-50/20-SAMTEC rectangular
1998
dsub
pm1
74
25
74
SP35/19-E-150-74-25-M83513
2768
dsub
pm2
100
26
100
SP43/11-E-80-100-E26-24-M8351301/HN
2558
dsub
pm1
102
25
102
SP36/24-E-150-102-25-3MM83513
2575
dsub
pm1
102
25
102
SP36/24-E-150-102-25-3MM83513
3220
dsub
pm1
200
25
200
SP52-25-E-150-200-25-M83513
2766
dsub
pm1
200
25
200
SP52-25-E-150-200-25-M83513
2767
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 35
.115
VACUUM
.046
PAVE-Mate® I #3142
2x
1.27
.02
SS PLATE
OVERHANG
1.90
ATMOSPHERE
.55
.090±.006
.052±.004
Type
1
.83
.57
1.67
O-ring face seal
51 #25 contacts, micro d-sub
High vacuum to 10 bar (150 psi)
32
INSTALLATION PORT
35
10/27/06 3:26:05 PM
Coaxial, EMI Shielded PAVE-Seal® Wire Harness
and PAVE-Mate® Connectors
Virtually any coaxial type connector is available in the PAVEMate I (dual sided disconnects) or PAVE-Mate II (single sided
disconnect with cable leads) including BNC, SMA, SMB, SMC,
Twinax, SHV, MHV, N, and Triaxal with floating or grounded
shields for low or high pressure or vacuum uses. In addition, any
type of coaxial or shielded cables can be hermetically sealed in
almost any combination or length as a PAVE-Seal Wire Harness.
Multi-pin coaxial PAVE-Mate connectors are also available
up to 29 shielded contacts. Connector shells are typical
electroless nickel plated aluminum or gold-plated stainless
steel. TDR testing is available for special impedance controls.
Electrical frequencies up to 1 gHz are an acceptable use.
See Website Quick Ship Price List
Dimensions in inches [mm]
PAVE-Mate® I #0261
VS15L size, 1" port
BNC to BNC
Isolated/floating shield
High vacuum to 100 bar
(1500 psi)
PAVE-Mate® I #1162
VS8 size, 1/2" port
Isolated/floating shield
High vacuum to 200 bar (3000 psi)
VACUUM
ATMOSPHERE
2.45
®
PAVE-Mate II #3199
5
.06 MAXIMUM
OVER/UNDERFILL
1.625
.1
240 MINIMUM
PAVE Catalog.indd 36
+.010
- .000
2.18
.1
.05±.05
.39
1.25
2.25
36
7
1 5/8-12 UNF-2A
3
2
Up to 29 coaxial pins
High vacuum to 50 bar (750 psi)
All MIL-Spec connector series
available
INSTALLATION PORT
4
1
2.00
.84
.10
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:26:12 PM
Coaxial, EMI Shielded PAVE-Seal® Wire Harness
and PAVE-Mate® Connectors
Dimensions in inches [mm]
PAVE-Mate® II #1861
VS12L size, 3/4" port
Optional isolated or grounded
shield
Vacuum to 100 bar (1500 psi)
PAVE-Seal® #1557
VS8 size, 1/2" port
RG179 coaxial cable
Vacuum to 100 bar (1500 psi)
62.23
2.45
ATMOSPHERE
INSTALLATION PORT
VACUUM
.06 MAXIMUM
OVER/UNDER FILL
BOTH SIDES
PAVE-Seal® #2791
+0.25
41.28
0
+.010
1.625
- .000
VS22 size, 1-5/8" port
27 twinaxial cables
High vacuum to 500 bar (750 psi)
2.54
.1
31.75
1.25
5000
197
MINIMUM
57.15
2.25
Refer to page 13 for
Description Code Breakdown
and Type Codes
7.62
.3
50.80
2.00
(1 5/8-UN 2A)
5000
197
MINIMUM
Coaxial, EMI Shielded Product Index
Type
1
Type
2
Type
3
Conductors
1
rf
pm1
stock
rf
pm1
stock
rf
pm1
rf
pm1
rf
ps
rf
by Stock Items, then Total Conductors
Total
Conductors
Description Code
Part/
Drawing #
1
1
VS15L-SS-150-1-BNC-BNC
261
1
1
VS8-SS-150-SMA-SMA (HELIUM)
1162
1
PT-1032 COAX CONNECTOR ASY LESS
CABLE/POT)
1032
1
1
PT16-SS-150-1-UHF-UHF
1768
1
1
PT4-SS-150-SMA-RG196-50mm
2410
pm1
1
1
PT4-SS-200-MD-MD
rf
pm1
1
1
PT4-SS-200-SMA
rf
pm1
1
1
PT8-SS-150-BNC-BNC
1532
rf
pm1
1
1
PT8-SS-150-BNC-BNC (XL)
2095
rf
pm1
1
1
PT8-SS-150-TNC-TNC
2172
rf
pm1
1
1
SO12L-SS-150-BNC
rf
pm1
1
1
SO12L-SS-80-BNC-BNC
rf
pm1
1
1
SO8-SS-150-SMA-SMA (grounded)
rf
ps
1
SO8S-SS-150-1-TWINAXE20-60-6
1330
rf
pm2
1
1
SPF12L-B-80-2-TE20-BJ77-2 triax
2220
rf
pm1
1
1
VS12-AL-150-F-F
2577
rf
pm2
1
1
VS12L-SS-150-1-BNC-SC
1861
rf
pm1
1
rf
pm1
1
rf
pm1
sc
hv
1
AWG#
75 ohms
Conductors
2
AWG#
1646
1
VS12-SS-150-TRIAX-TRIAX (QDB)
1155
1
VS15L-SS-150-BNC, 75 OHMs
2800
1
VS15L-SS-150-MHV-MHV
2954
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 37
9.91
.39
21.34
2.54
.84
.10
37
10/27/06 3:26:23 PM
Coaxial, EMI Shielded Product Index
Type
1
Type
2
rf
pm1
rf
pm1
rf
pm1
rf
pm1
rf
ps
rf
pm1
rf
pm1
rf
Type
3
hv
Conductors
1
AWG#
Conductors
2
AWG#
Total
Conductors
Description Code
Part/
Drawing #
1
1
VS15L-SS-200-TNC
1527
1
1
VS15L-SS-200-TNC-TNC, 75 ohm
2964
1750
1
1
VS18-SS-150-BNC-BNC
1
1
VS18-SS-150-SHV-SHV
1518
1
1
VS18-SS-200-1-RG225-12-96
0663MM
1526
1
1
VS18-SS-200-N-N
1
1
VS8-SS-150-SMA-SMA
1162-1
ps
1
1
VS8-SS-80-1-RG179-72-72
1557-1
rf
ps
1
1
VS8-SS-80-1-RG179-96-48
1557
rf
pm1
1
rf
pm2
1
rf
pm2
rf
rf
hp
1
VS8-SS-80-1-SMB-SMB
2144
1
VSBNC-SS-200-1-CRTFE18-BNC-13
2628
2
2
CONNECTOR FUEL GAGE NSN 5935-00-6738388 57F908572-3 Blackhawkcopter
75
ps
2
2
SO12L-SS-80-2-RG316-10-30
1504
ps
2
2
SO8-SS-150-TWINAXM17-120-24
1251
rf
pm2
2
20
2
SP4-E-150-2/1-TE20/TE26-TRIAX-12
rf
pm2
2
20
2
SP5.5-E-150-2-TE20-BJ77-12 triax
rf
pm1
3
3
VS22-SS-150-2/1-BNC/MHV-BNC/MHV
1699
rf
pm1
4
4
CF450-SS-150-4-BNC-BNC
980
rf
ps
4
4
KF200-SS-150-4-RG142/UB-BNC-24
rf
hv
5
5
SO16L-SS-80-3/2-RG316/18HV
1306
rf
ps
5
5
VS15L-SS-150-3-RG58-6T-6T
2435
rf
ps
5
5
VS18-SS-150-5-RG58-6T-6T
1774
rf
ps
5
rf
ps
5
rf
ps
rf
ps
rf
rf
18
2664
5
VS18-SS-150-5-RG59-6T-72T
2505
6
VS18-SS-150-5/1-RG174/1788022-
2963
6
6
VS18-SS-150-6-RG178-48-48
2393
6
6
VS18-SS-150-6-RG178A/U-120-120
pm2
6
6
VS18-SS-150-6-RG316-180-40FE6PA
ps
7
7
VS18-SS-150-7-RG174+C-12-120
1461
pm1
coax
8
8
FL54/18-AL-150-8-RG178 OR 196-DSUB-DSUB
3205
rf
ps
8
8
SP16-E-80-2/1/5-RG178/RG179/TE28
1574
rf
ps
8
8
VS18S-SS-80-8-RG178BU-72-(73-397)
1227
rf
ps
10
10
CF275-SS-150-10-HVC-36-36
1470
rf
ps
10
10
CF275-SS-150-10-RG178-36-36
1471
rf
ps
10
10
VS18-SS-150-10-RG58/U-8-12
2537
rf
ps
11
11
VS22-SS-150-11-RG178-60-60
1389
rf
ps
12
12
VS18S-SS-80-12-RG178BU-20SOC
1228
rf
ps
13
13
CF275-SS-150-13-R24A0024-30-30
1416
rf
ps
13
13
VS32L-AL-150-13-RG59U-480-480
0681-5
rf
pm2
16
20
16
D38999/23Y*-E-150-6/10-RG179/TZ24-P247PS1
2635
rf
pm2
16
rg316
16
VS22-SS-150-16-RG316-240-40FG1
3199
pm2
rf
rg179
16
VS26-SS-150-16C-RG179-240-40FG
2887
rf
ps
20
20
VS22-SS-150-20-RG178-60-60
2529
rf
pm2
21
21
VS22-SS-150-21-RG196-QDB-96
rf
pm2
29
29
VS26-SS-150-29-RG179-144-QDB
880
pm1
rf
29
29
VS32-SS-150-29-CX-3899940RN
3254
rf
ps
30
30
VS32-SS-150-30-RG316-2-2m
2482
rf
pm2
37
37
VS30-SS-150-37-RG196-QDB-96
coax
ps
38
38
NW40-SS-150-38-MICTOR-73-24
2751
rf
ps
40
40
VS26-SS-150-40-RG178-24-24
2561
72
VS22-SS-150-36TSP-100OHMTWINAX-5M-5M
2791
rf
rg174
coax
72
COAX
TWINAX
1
hv
1540
Visit www.PAVEtechnologyCo.com for updated information
38
PAVE Catalog.indd 38
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:26:31 PM
PAVE-Flex® Flat Cable Hermetic Seals
PAVE-Flex is a flat cable or flex circuit seal using either
standard flat cables or custom flat flex circuits. PVC,
Teflon or Kapton insulated flat cables are used. Solid
conductor rather than stranded conductor flat cables
are the most economical design.
Dimensions in inches [mm]
VACUUM
+.005
.736
- .000
PAVE-Flex #2858
Low profile flat cable with 2 #24
Teflon wires
High vacuum to 5 bar (75 psi)
INSTALLATION PORT
ATMOSPHERE
11.0
FULL R
32
10.0
15°
32
.020
+.005
.336
- .000
O-RING NOT SHOWN
THIS VIEW
.1
1.34±.04
1.85±.04
2 MINIMUM
.100
.265 MAXIMUM
FLEX CONDUCTORS FACING DOWN
(AWAY FROM THE 2x ET22 WIRES)
15.7 MINIMUM
PAVE-Flex #2698
Two PVC solid conductor flat
cable with
2 #10 PVC wires
Vacuum to 3 bar (45 psi)
metric
PAVE-Flex #2196
Two Kapton flex circuits in VS15
housing
High vacuum to 30 bar (450 psi)
PAVE-Flex #1188
Teflon solid conductor flat cable in
Custom molded epoxy seal with
vent port
High vacuum to 5 bar (75 psi)
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 39
39
10/27/06 3:26:38 PM
Thermocouple PAVE-Seal® and PAVE-Mate® Hermetic Seals
PAVE Technology can provide hermetic seals for one to over
100 pairs of all types and insulations of thermocouple wire
(Teflon insulated most commonly used). Any wire lengths may be
specified. The thermocouple wire conductor remains continuous
and unbroken through the entire PAVE-Seal ® wire assembly
assuring maximum temperature reading accuracy.
PAVE-Mate® I or II style hermetic circular or rectangular pin
connectors are also available.
Common thermocouple grade contacts are:
Type T, Copper-Constantan
Type K, Chromel-Alumel
Type J, Iron-Constantan
Type E, Chromel-Constantan
Visit www.PAVEtechnologyCo.com to view the Hermetic
Seals Quick Ship price list for stocked thermocouple seals.
Dimensions in inches [mm]
PAVE-Seal®
VS15L 1” port, 9 pairs Teflon
#1602, Type T Cu/Cu-Ni
#1664, Type J Fe/Cu-Ni
#1601, Type K, Ni-Cr/Ni-Al
#1650, Type E, Ni-Cr/Cu-Ni
High vacuum to 100 bar (1500 psi)
PAVE-Seal® #3212
VS22 size1 5/8" port
25 pairs Teflon Ni/Ni tc wire
High vacuum to 50 bar (750 psi)
VACUUM
PAVE-Seal® #2622
ATMOSPHERE
104 MINIMUM
4.00±.25
3.00±.25
NW16 flange
3 shielded pairs Teflon Type J
High vacuum to 10 bar (150 psi)
.9
90±4
2.00±.25
.2 TYP
.3 TYP
1
.75
1.150
40
PAVE Catalog.indd 40
.8
.5
OTHER 2 CONNECTORS &
FERRITE CABLE CLAMPS
NOT SHOWN FOR CLARITY
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:26:50 PM
Thermocouple PAVE-Seal® and PAVE-Mate® Hermetic Seals
ATMOSPHERE
2.75
PAVE-Mate® I #2734
VACUUM
VS26 size, 1-7/8" port
61 #20 thermocouple contacts
In-line style, any type
thermocouple.
D-sub 50 pin version also
available
INSTALLATION PORT
1.885
(
1.875-12 UN-2A)
32
1.25
2.50
2.25
3.7
Refer to page 13 for
Description Code Breakdown
and Type Codes
Thermocouple Product Index
By Stock, then Ascending Total Wires. All thermocouple wire types are available.
Type
1
Type
2
Total
Wires
PAVE Description Codes.
Housing & wires or pins.
AWG#
PART/
DRAWING #
tc
stock
18
VS15L-SS-150-9P-ET20-48-48, Type E Teflon
20
1602
tc
stock
18
VS15L-SS-150-9P-JT20-48-48, Type J Teflon
20
1664
tc
stock
18
VS15L-SS-150-9P-KT20-48-48, Type K Teflon
20
1601
tc
stock
18
VS15L-SS-150-9P-TT20-48-48, Type T Teflon
20
1650
tc
2
PT1-SS-150-1P-JT24-50-50mm
24
2409
tc
2
PT2-SS-150-1P-K30-120C-4W
30
2154
tc
2
SP6-E-150-1P-KT24-36-36
24
1606
tc
2
VS8-SS-150-1P-BX20-180-36
20
1621
tc
2
VS8-SS-150-1P-SX20-180-36
20
2035
ps
3
NW16-SS-200-3P-JT20-104-4
20
2622
4
PT4-B-150-2P-TT24-16-16
24
2136
ps
4
SO8X1688-AL-150-1/2-JT20/E16-3-3
16
1648
tc
4
SP12-E-150-2P-RTS20-120-120
20
1808
tc
4
VS15L-SS-150-2P-BX20-360-120
20
1963
tc
4
VS8-SS-150-2P-TT24-30-30
24
1997
tc
6
PT4-SS-150-3P-JT24-36-36
24
1559
tc
8
PT6-SS-150-4P-TT24-48-48
24
1399
tc
8
PT6-SS-80-4P-KT24-300-300mm
24
1493
tc
8
PT8-B-150-4P-TT20-72-72
20
1737
tc
8
PTN12-SS-200-4P-JT20-24-48
20
2241
tc
8
PTN16-SS-200-4P-JT20-36-240
20
1756
tc
8
PTN6-SS-200-4P-RT24-36-204
24
1478
tc
8
VS15L-SS-150-2P/6P-RT20/KT20-36-3
20
2038
tc
8
VS15L-SS-150-4P-BX20-120-120
20
1620
tc
10
NW40-SS-150-5P-TT24-1M-1M
24
1680
tc
10
PT20-SS-200-5P-KF22-48-48
22
2234
tc
10
PT6-SS-150-5P-KT24-84-36
24
1604
tc
10
SP8S-E-150-5P-KT24-36-36
24
1896
tc
10
VS12L-SS-150-5P-TT24-36-36
24
1700
tc
10
VS15L-SS-150-5P-KT20-5m-25m
20
3104
10
VS8-SS-150-5P-KT24-10-10
24
2716
tc
12
NW25-SS-150-6P-KT20-24-24
20
1960
tc
12
PT16-SS-150-6P-KXG16-36-36
16
2161
tc
12
PT24-SS-200-6P-JT20-24-24
20
2428
tc
tc
tc
tc
ps
tc
12
PT8-SS-150-6P-KT20-12-12
20
2583
ps
12
SP11M-E-80-6P-KT24-180CM-7CM
24
1517
12
VS15L-SS-150-4P/2P-RTT24/CX24-36-48
24
1505
sh
12
VS15L-SS-150-6P-ETSS20-15-15
20
1404
12
VS15L-SS-200-6P-CXG24-36-60
24
1842
14
PT8-SS-200-2/6P-TEE22/KT36-23.5/17-23.5/17
36
2908
tc
16
PT12-SS-200-8P-TT20-24-24
20
2150
tc
16
PT8-SS-150-8P-TT27-84-96
27
1944
tc
16
PT8-SS-150-8P-TT30-72-96
30
1704
tc
tc
tc
tc
tc
ps
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 41
.41
1.000
41
10/27/06 3:26:54 PM
Thermocouple Product Index
Type
1
Type
2
Total
Wires
PAVE Description Codes.
Housing & wires or pins.
tc
16
PT8-SS-150-8P-TT30SLE-72-96
30
1775
tc
16
PTN12-SS-200-8P-JT20-36-180
20
1679
ps
16
SP12-E-150-8P-BX20-240-180
20
722
tc
ps
16
SP8L-E-150-8P-BX20-240-180
20
722
16
VS15L-SS-150-6P/4-TT20/EE22-48-48
20
2214
tc
pm2
16
VS22-SS-200-8P-CX16-120-3450P
16
2707
tc
pm2
16
VS22-SS-200-8P-K16-120-3450P
16
2706
tc
16
VS25L-150-8P-BX20-240-120
20
1692
tc
18
PT20-SS-200-9P-KF22-48-48
22
2125
tc
18
PTN12-SS-200-9P-ET20-24-48
20
0904ET
tc
18
PTN12-SS-200-9P-KT20-24-48
20
1052+
ps
18
VS15L-SS-150-9P-KT24-96-96
24
2129
18
VS15L-SS-150-9P-RXT20-48-48
20
1875
ps
18
VS15L-SS-150-9P-TT20-60-60
20
1647X
tc
18
VS15L-SS-200-9P-JT20-72-60
20
1615
tc
19
PT1047 TYPE K VS18P-SS-150-19-20-QD
20
1047
tc
20
VS18-SS-150-10P-TT20SLE-72-72
20
2225
tc
24
FL-SS-150-12P-KG20-96-36 glass braid tc
20
2145
tc
24
NW40-SS-150-12P-BXT20-48-48
20
2441
tc
24
NW40-SS-150-12P-KT20-48-48
20
1581
tc
24
NW40-SS-150-12P-KT20-96-48
20
1581-1
tc
24
NW40-SS-150-12P-Ni/NiMoT18-36-24
18
1843
tc
24
NW40-SS-150-12P-NT20-48-48
20
2429
tc
24
PT16-SS-150-12P-KT20-120-480
10
2317
tc
24
PTN12-SS-200-12P-JT20-24-48
20
2240
tc
24
PTN16-SS-200-12P-KG20-36-36
20
3115
tc
24
PTN24-SS-200FR-24-SXT20-360<24
20
2323
tc
24
VS15L-SS-150-12P-CT24-120-60
24
1586
tc
24
VS18-SS-200-12P-RT20-12-12
20
2564
tc
25
VS22-SS-150-25P-KT20-36-36
20
2063
tc
26
VS18-SS-200-5P/8P-KT20/RT20-180-180
20
2009
tc
27
SPF18-E(1.125DIA)37-TT24
24
1232
tc
32
VS22-SS-150-16P-TT20-24-24
20
1871
tc
tc
tc
tc
34
VS22-SS-150-5P/2P/20-JT20/KT20/TEE20-72-72
20
2275
tc
36
VS22-SS-150-18P-KT20-48-48
20
1779
tc
36
VS22-SS-150-18P-TT20-300-24
20
1804
tc
40
PT24-SS-150-20P-TT24-36-36
24
1683
tc
40
VS22-SS-150-20P-TT20-48-48
20
1790
tc
40
VS22-SS-200-20P-KT20-24-60
20
2347
tc
40
VS22-SS-200-20P-RXT20-24-60
20
2032
40
VS26-SS-200-20-TT20-3122P-300 &
SC3126F20-20-TT20-120
20
2205
tc
48
PTN24-SS-200FR-24TP-SXT20-360<24
20
2322
tc
50
VS22-SS-150-25P-ET24SLE-60-48
24
2184
tc
50
VS22-SS-150-25P-NT20-36-36, Ni/td>
20
3212
tc
50
VS22-SS-150-25P-TT20-36-36
20
2057
1626
tc
ps
pm2
tc
60
VS22-SS-150-30P-TT24-120-24
24
pm1
INLINE
61
VS26-SS-150-61-20- 3470PS
20
2734
tc
pm1
61
VS30-SS-150-61-T20-QDBP-QDB(NP)
20
791
tc
80
SO26-SS-150-40P-TT20-100-100
20
2372
tc
100
VS32-SS-50P-RT29-48-72
29
1475
1161
tc
PAVE Catalog.indd 42
PART/
DRAWING #
tc
tc
42
AWG#
120
VS32-SS-200-40P/20P-CGX24/KT24-36-36
24
tc
ps
140
VS32-SS-150-70P-TTSTR20-48-84
20
2535
tc
160
VS32-SS-150-80P-KT20-48-48
20
1773
tc
250
VS32L-AL-150-125P-TT24-480-480
24
0681-3
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:26:57 PM
PAVE-Seal® Threaded Cu Rod Hermetic
Low and high-current and voltage terminal seals for low or high
pressures and vacuum use.
See product index on page 45 and on website.
600 V minimum ratings
Dimensions in inches [mm]
ATMOSPHERE
PAVE-Seal® #1573
(ø0.250-20 UNC-2A)
PT8 size, 1/2" NPT
1/4" copper rod, 70A
Vacuum to 50 bar (750 psi)
PRESSURE
2X
1.5
0.6
2X
0.3
(0.87)
(HEX)
2.8
(6.7)
ATMOSPHERE
PRESSURE
.106
.090
(3/4 NPT)
1.30
PAVE-Seal® #3181
PT12 size, 3/4" NPT
½” copper rod, 200A
Vacuum to 50 bar (750 psi)
2X
(ø0.500-14 NPT)
(1.1)
(2x 1/2-20 UNF)
1.13
.94
.87
1.31±.06
1.45±.06
WASHERS NOT
SHOWN FOR
CLARITY
1.18
.313
2.25±.06
2.76
6.18
PAVE-Seal® #1565
VS26 size, 1 7/8" port
¾” copper rod, 400A
High vacuum to 30 bar (450 psi)
PAVE-Seal® #2584
SO8 size, 1/2" straight thread
6-32 threaded brass rod, 20A
High vacuum to 100 bar
(1500 psi)
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 43
43
10/27/06 3:27:01 PM
PAVE-Seal® Solder Cup Pin Seals
PAVE offers both standard and custom designed solder cup pin
seals for sizes #20 AWG or smaller for low and high pressures
and vacuums. Contacts are typically gold-plated copper or
brass alloy. Pins can be on both sides or just one side and
the other side pre-wired with a sealed insulated wire of any
insulation type or lengths in either a molded epoxy or metal
housing of your choice.
Dimensions in inches [mm]
PAVE-Seal® #1962
SPF12 size, 3/4" port
12 #20 solder cup contacts
Non-magnetic versions
High vacuum to 10 bar (150 psi)
ATMOSPHERE
PRESSURE
PAVE-Seal® #0207
2X
0.120
4X
0.085
(0.495)
SP8L size, 1/2" port
9 #20 solder cup contacts
High vacuum to 200 bar (3000 psi)
0.25
±0.06
2X
(0.750)
1.25
+0.03
-0.05
GOLD PLATED
BOTH ENDS
4X
0.085
0.120
2X
SOLDER CUP POSITIONS
SCALE 4=1
PAVE-Seal® #2208
SP8S size, 1/2" port
5 #22 Tefzel wires and pins
High vacuum to 60 bar (1000 psi)
PAVE-Seal® #2096
PT1 size, 1-1/16" NPT
1 #18 wire #12 pins
Vacuum to 100 bar (1500 psi)
44
PAVE Catalog.indd 44
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:27:11 PM
Threaded Cu Rod Hermetic Product Index
Type
1
Type
2
Conductors
1
AWG# or
Thread size
Maximum
Amperage
+600 V
Total
Conductors
PAVE Description Codes
PART/
DRAWING #
threaded copper stud or rod high current terminal seals
terminal
stock
1
0.25”
75
1
PT8-SS-150-1-.25CU-3-3
1573
terminal
stock
1
0.50”
200
1
PT16-SS-200HV-.50Cu-2.4-3.0
1587
terminal
stock
1
0.50”
200
1
PT12-SS-200-.5CU-3-2
3181
terminal
stock
1
0.75”
400
1
VS26-SS-150-1-.75CU-3.7-3.7
1565
terminal
2
20
7
2
PT6-B-150-2-NICKEL FILAMENTS
1307
terminal
2
18
10
2
PT6L-SS-80-2-TE18 probe
1340
terminal
1
0.15”
15
1
SO8-SS-80-1-B6.32CU-1-1
2584
terminal
1
0.17”
20
1
SO8-SS-80-1-B10.32-.5-.5
2616
terminal
1
0.25
25
1
SO12-SS-150-.25CU-.7-.7
2910
terminal
1
0.25
25
1
SO12-SS-150-1-.25-22-33mm
3132
terminal
1
12
25
1
VS8XL-AL-80HV-1-.08CU-1.3-.5
2053
terminal
1
0.19”
50
1
PT4-SS-80-1-.19CU-.94-1.62
926
terminal
1
0.38”
150
1
PT12-PS-200HV-.38Cu-1-1
1236
terminal
1
0.25”
75
1
VS12-SS-200-1-.25CU-3-3
916
terminal
1
0.38”
150
1
SO17S-BOS-200HV-375CU-4-4
1555
0.38”
150
1
VS15-SS-150-.38CU-1-1
1444
terminal
terminal
1
0.38”
150
1
VS15-SS-80-.38T-1-1
1568
terminal
1
0.50”
200
1
VS18-SS-200-.50CU-2.2-2.6
917
terminal
1
0.75”
400
1
PT24-SS-150HV-1-0.75cu-4-4
1629
terminal
1
0.63”
400
1
SO17LH-PS-200-1-.63CU
2893
Solder Cup Pin Seals Product Index
by Total Conductors
Refer to page 13 for
Description Code Breakdown
and Type Codes
Type 1
Type 2
Conductors
1
AWG#
Total
Conductors
Description Code
Part/
Drawing #
soldercup
ps
1
18
1
PT1-SS-80-1-#12/TE18-.3-24
2096
soldercup
ps
2
24
2
PT2-B-150-2-TEE24-SC-6
1438
soldercup
ps
2
20
2
SO8-SS-150-2-TE20-10-SC
3133
2
24
2
SP6-E-200-2-24-T
1847
2384
tabs
soldercup
ps
2
8
2
SP8S-E-150-2-TE22-18-3PINS(MOLEX)
soldercup
ps
2
22
2
SPF12-E-150-2S-TEE8-1.5M-LUG
3128
soldercup
ps
3
24
3
SO8-SS-150-3-PC24-12T-SC
2066
soldercup
ps
4
26
4
PT6-SS-80-4-TE26-8-SC
953
soldercup
ps
5
22
5
SP8S-E-150-5-TZ22-80-SC
2208
soldercup
ps
6
18
6
FL-AL-150-6-TE18-PIN-12
3139
soldercup
ps
6
20
6
SPF9-E-80-6-20-SC-SC
1990
soldercup
ps
9
22
9
SP8M-E-150-9-22-SC-sc REV JOI-9 SOC!
207
soldercup
ps
12
22
12
SPF12-E-80-12-22-SC-SC
1962
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 45
45
10/27/06 3:27:15 PM
High Voltage Hermetic Cable PAVE-Seal®
and PAVE-Mate® Connectors
Any type of high voltage wire or cables up to 30 kV, single or
multiple cables, with or without high voltage cable connectors
for low or high pressures and vacuums.
Dimensions in inches [mm]
PAVE-Mate® I #1518
VS15L size, 1” port
High vacuum to 100 bar (1500 psi)
SHV to SHV connector
5 kV, isolated shield
PAVE-Seal® I #2691
SP6 size, 3/8" port
High vacuum to 300 bar (4500 psi)
15 kVdc with molded on connector
Airborn laser optic systems
INSTALLATION PORT
RECOMMEND TRUARC N5000-106
PRESSURE ATMOSPHERE
20°
PAVE-Seal® #2959
SP16 size, 1" port
Vacuum to 100 bar (1500 psi)
22 wires rated 2.5 kV
submarine array
32
15°
2
32
.996
.808
32
1.130
45°
.1
18 MINIMUM
1.01
18 MINIMUM
1.11
1.062
1.006±.002
.056
.208
.577
PAVE-Seal® #2490
SPF12 size, 3/4" port
Vacuum to 20 bar (300 psi)
30 kV PVC cable with connector
mass spectrometers
46
PAVE Catalog.indd 46
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:27:19 PM
High Voltage Hermetic Cable PAVE-Seal®
and PAVE-Mate® Connectors
DESCRIPTION CODE BREAKDOWN
HOUSING
PART
SEE PAGES
6-10
Note: stock items are subject to change. Please check website for most current updates.
UPPER
PAVE-SEAL®
TEMPERATURE
RATING
°C
HOUSING
MATERIAL
NUMBER OF
WIRES
YOUR CHOICE
OPTIONS
PT
SO
VS
CF
SP
B = Brass
SS = Stainless Steel
PS = Plated Steel
AL = Aluminum
E = Epoxy Molded
1 thru?
P = pair (ie,tc)
TP = twisted pair
TSP = twisted
shielded
pair
150
200
200FR
WIRE
INSULATION
AND GAGE
PC = PVC insulated
TE = Teflon insulated
TZ = Tefzel insulated
JT = J thermocouple
KT = K thermocouple
ET = E thermocouple
TT = T thermocouple
WIRE LENGTH
ON LEFT OR
HEX SIDE
METRIC OR
ENGLISH
WIRE LENGTH
ON RIGHT OR
THREAD SIDE
METRIC OR
ENGLISH
• Indicate inches, feet, millimeters,
or meters.
• Unlimited lengths.
• Options include end stripping,
tinning, or terminations.
• Thermocouple wire is Teflon
insulated with #20 and #24
standard sizes.
High Voltage Product Index
Refer to page 13
for Type Codes
by Total Conductors
Type
1
Type
2
Conductors
1
hv
ps
1
1
PT2-SS-150-1-10KV COAX
1151
hv
ps
1
26
1
SP6L-E-150-1-1786580-30N-3-26
2691-1
hv
ps
1
26
1
SP6L-E-150-1-1788425-30N-5-24
1359
hv
ps
1
18
1
SPF12-E-150-1-B200PA48/BUS20-26-3.8
2809
hv
ps
1
18
1
SPF12-E-150-1-B200PA48-31T-13
2304
hv
ps
1
18
1
SPF12-E-150-1-B200PA48-44T-2
2305
hv
ps
1
18
1
SPF12-E-150-1-B200PA48-77T-22
2370
hv
ps
1
18
1
SPF12-E-150-1-B8866-36-24
1534
hv
ps
1
18
1
SPF12-E-150-1-Belden8866/B9867-48-48
2312
hv
ps
1
20
1
SPF12-E-150-1-Belden9867/BARE14-36-11
2490
hv
ps
1
20
1
SPF12-E-150-1-Belden9867/BUS16-36-40
2439
hv
ps
1
20
1
SPF12-E-150-1-Belden9867-48-48
2311
hv
ps
1
14
1
SPF12-E-150-B200PA48/BARE14-17-36
2793
hv
ps
1
20
1
SPF12-E-150-B200PA48/BUS20-38-24
2792
ps
hv
1
18
1
SPF12-E-200-1-RB18-8-SOC
3134
hv
pm2
1
22
1
VS12L-SS-150-1-MHV-SC
2966
pm1
hv
hv
ps
1
AWG#
Conductors
2
AWG#
Total
Conductors
PAVE Description Codes
Part/
Drawing #
mhv
1
VS15L-SS-150-1-MHV-MHV
2954
70 ohm
1
VS18-SS-150-1-5602-5-5m
3167
rf
pm1
1
shv
1
VS18-SS-150-SHV-SHV
1518
hv
ps
2
24
2
SPF12-E-150-1/1-TE24-FO1B090-24-24
1659
hv
ps
2
22
2
VS15L-SS-90-2-HV22-60-24, 15KV
1500
hv
ps
2
20
3
SPF12-E-150-1/1/1-1679611/TEE18/2224-24 15kv
2252
hv
ps
7
22
7
SP11L-E-150-1-Belden8868-60-20CM 15kv
2392
hv
ps
7
16
7
SPF38-E-150-7-16SIL-14-14, 20kvdc
2266
12
24
12
VS12L-AL-150-12-Judd24-24-15
2600
ps
1
hv
ps
12
36
2
22
14
SPF12-E-200-1-PC18-8-SOC
2304-1
hv
ps
18
26
1
18
19
FL-SS-150-18/1-TE26/HV18-24-11
2528
ps
hv
22
22
22
SP16-E-150-22-HV22-18-18
2959
See PAVE website for updates
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 47
47
10/27/06 3:27:24 PM
PAVE-Optic Seals
PAVE-Optic Seals are hermetically sealed single or multi-mode
fiber optic cables, either insulated (Teflon or PVC) or bare cables.
Insertion loss is less than 0.5 db @ 800 nm. Any type, combination
or lengths can be ordered for a wide range of applications from
high vacuums to moderate or high pressures. ST, SMA, FCPC
PAVE-Mate standard multi-mode connectors are also available.
See FAQ for quote requirements for special designs or contact
factory sales engineer via website or telephone.
See Website Quick Ship Price List
Dimensions in inches [mm]
PAVE-Mate® I #1271
VS8 size, 1/2" port
Multi-mode 62.5/125µ
Vacuum to 100 bar (1500 psi)
ST coupling
PAVE-Mate® I #1563
VS8 size, 1/2" port
Multi-mode 62.5/125µ
Vacuum to 100 bar (1500 psi)
SMA coupling
PRESSURE
ATMOSPHERE
®
PAVE-Mate I #2567
VS8 size, 1/2" port
Single mode SMF28
Vacuum to 1000 bar (15,000 psi)
Delphi snap lock coupling
.4 MINIMUM
.4 MINIMUM
2x 1/2-20 UNF-2A
PRESSURE
PAVE-Seal® #2905
VS8 size, 1/2" port
5 SMF28 fibers
Vacuum to 1000 bar (15,000 psi)
Teflon jacket
PAVE Catalog.indd 48
ATMOSPHERE
2x 1/2-20 UNF-2A
.87
1/2-20 UNF-2B
.585
.8
.8
R.03
2x .63
39.4[1000] MINIMUM
48
32
INSTALLATION PORT
45°
.25
1.61
39.4[1000] MINIMUM
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:27:29 PM
PAVE-Optic Seals Product Index
by Total Conductors
Refer to page 13 for
Description Code Breakdown
and Type Codes
Type
1
Type
2
Type
3
Conductors
1
fo
pm1
stock
fo
pm1
stock
fo
pm1
hp
fo
pm1
fo
AWG#
Conductors
2
AWG#
Total
Conductors
Description Code
1
1
VS8-SS-150-1-62/125u-ST-ST
1271
1
1
VS8-SS-150-62.5/125u-SMA-SMA906
1563
1
1
VS8N-SS-150-1-SMFO-QD-QD FO NIPPLE
ADAPTER
2567
1
mmfo
1
VS8N-SS-150-1-MMFO-SNAPLOCK
2567-1
1
mmfo
1
multimode patch cord for 2567-1
2843-1
fo
ps
1
1
PT4-SS-150-1-FOSM
1301
fo
ps
1
1
SP4.9-E-150-1-SMFO-6.5-39 single mode
2176
fo
ps
1
1
SP6-E-150-1-SMFO-3-36
2139
fo
ps
1
1
SP6-E-80-1-FOMM-2M-2M
2121
fo
hv
1
SP8/128-E-200-1/1-HV18-FO-36-36
1319
fo
hp
1
mmf
1
SP8H-E-200-1-MMF-39-19
2851
fo
ps
1
FIBER
1
SP8L-150-1-FO-150cm-150cm
2712
fo
ps
1
1
VS12X-SS-150-2-SI80/125-100-100C
1173X
fo
pm1
1
1
VS15-SS-80-1-1OOUM-ST-ST
819
fo
ps
1
1
VS18-SS-150-1-FO-1050mm-450mm
2430
fo
pm1
1
1
VS8-SS-150-1-100/140u-SMA-SMA 906
1514
fo
pm1
1
1
VS8-SS-150-1-100/140u-ST-ST
2027
fo
pm1
1
1
VS8-SS-150-1-1000/1250u-SMA-SMA905
2026
1
1
VS8-SS-150-1-1000u(LOW OH)-SMA
3126
1
VS8-SS-150-1-FO-SMA-SMA
855
1
VS8-SS-1FO-FC/PC-36 PM2
1124
2750
pm1
fo
pm1
fo
pm2
1
fo
ps
3
2
NW25-SS-150-3-FO-82-36
fo
ps
2
2
PT4-SS-150-2-FOSM TWIN FIBER OPTIC
1302
fo
ps
2
2
VS12-SS-150-2-SI80/125-100-100C
1173
fo
ps
2
2
VS8-SS-80-2-FO(BLUE)-1-1M
2127
fo
ps
2
2
VS8-SS-80-2-FO(CLEAR)-1-1M
2126
fo
pm1
1
fo
2
20
3
SP13-E-150-2/1-E20/FO-#16P-36
2947
fo
ps
1
24
2
fo
3
SP8/128-E-200-1/2-TE24/FO-2-2m
2625
fo
hp
3
3
SP8H-3-150-3-FO-0.5-0.5m
1991
fo
ps
3
3
VS8-AL-150-3-FOSMF28-6-2.3
2253
fo
ps
3
3
VS8-SS-150-3-SMFO-48-48
1955
fo
ps
3
3
VS8-SS-80-3-FO-6-6
2271-1
fo
ps
4
4
CF275-SS-150-4-FO-1M-1M
731
4
FL80-SS-150-4-MMFO-338-278
1442
4
SP8H-E-150-4-SMFO-50-50cm, single mode
2146
4
VS8-SS-150-4-125mFO-60-60
1624
5
SP8H-E-150-5-SMF28-1000-1000M
2953
5
SPF12-E-80-4/1-PC20/MMFOST-12-12
2649
5
VS8N-SS-150-5-SMF28-1000-1000MM
2905
fo
4
FIBER
MM
fo
ps
fo
ps
4
fo
hp
fo
ps
4
20
fo
hp
5
SM
fo
ps
8
8
CF275-SS-150-8-FO50/125-500-500mm FCPC
2290
fo
ps
8
8
TBS-E-150-8FOARRAY-42-2.74
2000
fo
ps
8
8
TBS-E-150-8FOARRAY-42-4.7
1999
fo
ps
8
8
VS12-SS-80-4/4-FOP/600UM-30-12
2183
fo
ps
12
12
SO12LX-SS-150-6/6-SM/MM-374-19
2068-1
fo
ps
13
13
VS12L-SS-80-5/9-SM/MM-3m-3m
1959
fo
ps
18
18
VS14-18 F.O. W/E FIBER (DOUBLE ENDED)
1317
fo
ps
18
18
VS15-18 F.O. W/E FIBER (SINGLE)
1314
fo
ps
20
20
SP8L-E-150-20-FOSM-1-2M
1873
fo
ps
48
48
VS15S-AL-80-48-100/125FO-60-60
2342
5
SMF28
1
FIBER
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 49
Part/
Drawing #
49
10/27/06 3:27:32 PM
Explosion-proof and Hermetic PAVE-Seal® Wire Harnesses
EExd II, UL, Factory Mutual Enclosure 3600, and/or CSA in metric
threads, NPT threads and/or TIG/laser welded designs can be provided.
Flame-proof barrier
Hazardous Locations PAVE-Seal® Wire Harnesses
PAVE-Mate® hermetic signal or power connectors approved by UL, CSA or FM for hazardous locations
Class 1, Division 1 or II, Groups C-D areas are available. Submersible versions are also available.
Metric mm
PAVE-Seal® #0840
M24 threaded aluminum housing
Vacuum to 30 bar (450 psi)
CENELEC code EEx d IIc 90C
Up to 12 #20 PVC wires, 60 V
Intrinsically safe
Coriolis mass flowmeters,
marine, mining
PAVE-Seal® #0950
M24 threaded aluminum housing
Vacuum to 40 bar (450 psi)
CENELEC code EEx d IIc
Up to 6 #20 PVC wires, 250 V
Non-intrinsically safe
PAVE-Seal® #1512
M24 threaded Valox or Ryton
housing
Vacuum to 30 bar (450 psi)
CENELEC code EEx d IIc
Non-intrinsically safe
Up to 12 #20 PVC wire 250 V
Low cost, high volume version
Optional O-ring seal
Other safety agency explosion-proof certifications such as ATEX, UL 1203 and 60079,
and CSA C22.2 No 30 with either metric, NPT or pg threading can be obtained for most
PAVE-Seal® Wire or Cable Harness products.
50
PAVE Catalog.indd 50
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
10/27/06 3:27:34 PM
Quotation Request Form
Stranded, plated copper wires, 600 V (105˚C PVC or 200˚C Teflon® Insulation)
Also available on-line in Design Assistance section.
Any type or size of wire or
cable may be specified
including shielded cables,
coaxial cables, thermocouple
wire pairs, high voltage wires,
fiber optic cable, flat cables,
etc. for any length.
NO DETECTABLE LEAKAGE
THRU CONDUCTOR OR
INSULATION.
Wire Conductor
Gage (AWG)
30
28
26
24
22
20
18
16
14
12
10
O.D.
0,30 mm
0,40
0,50
0,60
0,78
0,90
1,21
1,50
1,85
2,4
2,94
Amperage
Rating
2
2
3
3
4
6
8
10
18
25
40
4,67
80
6
Nominal Insulation
Overall
Diameter (O.D.)
.03"
0,8 mm
.04
1,0
.05
1,3
.06
1,5
.06
1,5
.07
1,8
.08
2,0
.09
2,3
.11
2,8
.12
3,0
.21
5,3
.26
Fax copy to +1 937-890-5165
or go online for design assistance
6,6
Please send the following information with your request for a quote or sales engineering design recommendations:
Name _________________________________________________ Title_____________________________________________ Department _______________________________
Company name _________________________________________________________ Street _____________________________________________________________________
City _________________________________________________ State/Providence __________________________ Mail code _________________________ Country _________
Telephone _____________________________ Fax _____________________________________ E-Mail ______________________________________ Mail catalog? ________
How did you become aware of PAVE? __________________________________________________________________________________________________________________
Operating Conditions
Describe equipment our product will be used in _________________________________________________________________________________________________________
Describe media to be sealed (e.g., gas, fluids) __________________________________________________________________________________________________________
Maximum pressure and/or vacuum ___________________________________________________________ Temperature extremes (°C) ________________________________
Voltage (Indicate AC or DC) __________________________________________________________________ Amperage duty cycle _____________________________________
Special requirements _________________________________________________________________________________________________________________________________
Leak rate test _______________________________________________________________________________________________________________________________________
Design Requirements
Number of electrical/fiber-optic conductors by size/type.
PAVE-Seal Style with cable both ends (_____) Cable Gage(s) __________________________________________ Insulation type _____________________________________
PAVE-Mate I® Style with pin disconnects both ends. Number of Pins (_____) Gage ___________________________________________________________________________
PAVE-Mate II® Style with pin disconnect one side only. Number of pins (_____) Gage _________________________________________________________________________
Number of Pins/Wires _______________________________________________________________Gage or size? ____________________________________________________
PAVE Optic-Seal® Style with fiber-optic cable both ends (_____) ___________________________________________________________________________________________
Cable specification including insulation type and size ________________________________________________ Define any high pressure cycling, direction and duration
____________________________________________________________________________________________________________________________________________________
Preferred method of installation (Threaded type, O-ring gland or face seal or TIG or laser welded) _____________________________________________________________
Quantities to quote ____________________________________________ Target/budget prices?_____________________________________ Needed ship date? ___________
BULKHEAD
THICKNESS
Please fill in the blocks and
check appropriate circles.
BULKHEAD
MATERIAL
MAXIMUM DIAMETER
O-RING
CHECK CIRCLE TO INDICATE
PRESSURE OR VACUUM
DIRECTION & AMOUNT
PRESSURE LEVEL
RANGE
FIXED
PISTON
FACE
CHECK CIRCLE TO INDICATE
PRESSURE OR VACUUM
DIRECTION & AMOUNT
STYLE
OPTIONAL
DISCONNECT
PRESSURE LEVEL
OPTIONAL
DISCONNECT
SIZE
VACUUM LEVEL
VACUUM LEVEL
MATERIAL
CSA
Ratings
Available
B
HEX SIDE WIRE LENGTH
OR DISCONNECT TYPE?
A
C
THREAD SIDE WIRE LENGTH
OR DISCONNECT TYPE?
1 bar = 14.7psi = 10 1 kPa = 34 ft or 10 m of H20
Quick-shipping standard connectors and rush shipment or prototyping available! Simple or detailed drawings sent along with your
quotation request are encouraged to help clarify your minimum critical mechanical and electrical requirements so we can help
direct you to the most cost effective, fast solution.
Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165
PAVE Catalog.indd 51
51
10/27/06 3:27:39 PM
PAVE products have a limited lifetime warranty,
depending upon the application’s pressure,
temperature, and other operating conditions.
Pressure And Vacuum Electronics
2751 Thunderhawk Court
Dayton, Ohio 45414-3451 U.S.A.
Phone +1-937-890-1100
Fax +1-937-890-5165
www.PAVEtechnologyCo.com
PAVE-Seal®, PAVE-Mate® and PAVE-Flex® are the
registered trademarks of PAVE Technology. © 2006
PAVE Catalog.indd 52
Specifications are
subject to change
without notice.
Pressure ratings
and pressure
direction use
should be factory
verified on drawings prior to use by the customer.
10/27/06 3:27:44 PM