FLUIDS, LUBRICANTS AND GENUINE PARTS
ENGINE
Description
Type
Part
Number
Capacities
U.S.
Metric
Cooling System
♦ Engine Coolant (3.8L
Engine)
MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile
Formula HOAT (Hybrid Organic Additive Technology)
1 Gallon 05066386AA
13
Quarts
12 Liters
♦ Engine Coolant (2.8L
Diesel Engine)
MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile
Formula HOAT (Hybrid Organic Additive Technology)
1 Gallon 05066386AA
13
Quarts
12 Liters
6 Quarts
5.7 Liters
Engine Oil with Filter
1 Quart 04761872AC
♦♦/♦♦♦ Engine Oil (3.8L
Engine) Domestic and
Export Non ACEA
MOPAR® API Certified SAE 5W-20 engine oil,
meeting the requirements of Chrysler Material
Standard MS-6395.
♦♦♦♦ Engine Oil (2.8L
Diesel Engine)
SAE 0W-40 Diesel Engine Oils confirming to API
(American Petroleum Institute) Quality CI-4 or CJ-4.
For countries that use the ACEA European Oil
Categories for Service Fill Oils, use engine oils
meeting the requirements of ACEA C3 and approved
to MB 229.31 or MB 229.51.
1 Quart 05127394AA
7 Quarts
6.6 Liters
Engine Oil Filter (3.8L
Engine)
MOPAR® Engine Oil Filter
04105409AC
N/A
N/A
Engine Oil Filter (2.8L
Diesel engine)
MOPAR® Engine Oil Filter
5003558AA
N/A
N/A
2 Door 18.5
Gallons
2 Door 70 Liters
4 Door 22.5
Gallons
4 Door 85Liters
2 Door 18.5
Gallons
2 Door 70 Liters
4 Door 22.5
Gallons
4 Door 85Liters
2 Door 18.5
2 Door 70 Liters
5 Quarts 04761851AD
Fuel (approximate)
Fuel Selection (3.8L
Engine) Domestic
Fuel Selection (3.8L
Engine) Export
Fuel Selection (2.8L
Diesel Engines)
87 Octane, (R + M)/2 method
91 Octane
Use only the best quality fuel with a calculated
Cetane Index of 50 or higher. In addition, the
N/A
N/A
N/A
Description
Capacities
Part
Number
Type
U.S.
manufacturer recommends using diesel fuel with a
sulfur content of less than or equal to 15 ppm.
Metric
Gallons
4 Door 22.5
Gallons
4 Door 85Liters
1.25
Pounds
0.51
Kilograms
A/C Refrigerant System
A/C Refrigerant
(Single)
R-134a
82300101AB
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
♦♦♦ For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that
meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for
correct SAE grade.
♦♦♦♦ If equipped with a particulate filter, use SAE 5W-30 Diesel Engine Oils confirming to API (American Petroleum
Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine
oils meeting the requirements of ACEA C3 (LOW ASH) and approved to MB 229.31 or MB 229.51.
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
SPARK PLUGS
Gap
Description
Spark Plugs (3.8L Engine)
Type
Part Number
Champion® Double Platinum Spark Plug
04686742AE (RE14PLP5)
U.S.
Metric
0.050 in
1.27 mm
TRANSMISSION
Capacities
Description
Type
Part Number
U.S.
Metric
4.0 Quarts
3.8 Liters
Automatic
42RLE - Service Fill
MOPAR® ATF+4 Automatic
Transmission Fluid
1 Quart 05013457AA
1 Gallon -
Capacities
Description
Type
Part Number
U.S.
Metric
8.8 Quarts
8.3 Liters
4X2 - 5.5
Quarts
4X2 - 5.2
Liters
4X4 - 6.5
Quarts
4X4 - 6.2
Liters
4X2 - 14.8
Quarts
4X2 - 14 Liters
4X4 - 16.9
Quarts
4X4 - 16 Liters
1.6 Quarts
1.5 Liters
05013458AA
♦ 42RLE- Overhaul Fill
MOPAR® ATF+4 Automatic
Transmission Fluid
1 Quart 05013457AA
1 Gallon 05013458AA
1 Quart 05013457AA
545RFE - Service Fill
MOPAR® ATF+4 Automatic
Transmission Fluid
1 Gallon 05013458AA
1 Quart 05013457AA
1 Gallon 05013458AA
1 Quart 05013457AA
♦ 545RFE - Overhaul Fill
MOPAR® ATF+4 Automatic
Transmission Fluid
1 Gallon 05013458AA
1 Quart 05013457AA
1 Gallon 05013458AA
Manual
♦♦ NSG370
MOPAR® Manual Transmission
Lubricant
1 Quart - 04874464
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an
auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
♦♦ Approximate dry fill or fill to bottom edge of fill plug hole.
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
TRANSFER CASE
Capacities
Description
Type
Part Number
U.S.
Metric
Capacities
Description
♦ NV241
Type
Part Number
MOPAR® ATF+4 Automatic Transmission
Fluid
U.S.
Metric
2.1 Quarts
2.0 Liters
1 Quart - 05013457AA
1 Gallon - 05013458AA
♦ Approximate dry fill or fill to bottom edge of fill plug hole.
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
CHASSIS
Capacities
Description
Type
Part Number
U.S.
Metric
Axles (Front)
186 FBI (Model 30) - Front Axle
MOPAR® Gear & axle Lubricant
SAE 80W-90
1 Quart - 04874468
2.1 Pints
1.0 Liters
♦ 216 FBI (Model 40) - Front
Axle
MOPAR® Gear & axle Lubricant
SAE 80W-90
1 Quart - 04874468
2.7 Pints
1.3 Liters
MOPAR® Gear & axle Lubricant
SAE 80W-90
1 Quart - 04874469AA
4.75
Pints
2.25 Liters
N/A
N/A
N/A
N/A
N/A
N/A
Axles (Rear)
♦/♦♦♦♦ 226 RBI (Model 44) Rear
Axle
Chassis Systems
♦♦ Brake Master Cylinder
♦♦ Clutch Master Cylinder
♦♦♦ Power Steering Reservoir
MOPAR® Brake Fluid DOT 3, SAE
J1703.
MOPAR® Brake Fluid DOT 3, SAE
J1703.
MOPAR® Power Steering Fluid +4
12 oz. Bottle 04318080AB
32 oz. Bottle 04318081AB
12 oz. Bottle 04318080AB
32 oz. Bottle 04318081AB
16 oz. Bottle 05166226AA
♦ Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR® Limited Slip Additive.
♦♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (04549625AC), is
acceptable.
Capacities
Description
Type
Part Number
U.S.
Metric
♦♦♦ If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid
(05013457AA), is acceptable.
♦♦♦♦ If equipped with Trailer Tow package use MOPAR® Synthetic Gear Lubricant, SAE 75W-140
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.