Pressure Tanks
ASME Code Stainless Steel,
Galvanized and ASME PT Series Tanks
www. binks. com
A183-100 R 10/11
The Case for ASME Code Tanks:
Numerous government and insurance bodies (e.g. OSHA,
your fire marshal, your insurance underwriter, etc.) use National Fire Protection Association (NFPA) standards.
NFPA standards call for the use of AS ME-code tanks. All Binks pressure tanks are made to ASME standards.
Note: Neither Binksenor its employees are an Authority Having Jurisdiction (AHJ).
0
How to Select a Binks"Pressure Tank: It's helpful to knowthefollowing information:
•
Size/Scope of your operation in tenns of gallons per day per spray for a given spray station.
•
If you're using a plural component coating, what is the tank life of your coating?
•
Is your coating waterborne or solvent borne? What degree of corrosion resistance do you need?
•
Will you need to use a bottom outlet (may be needed for high viscosity materials or high cost materials).
•
Will you be putting either 1gallon or 5 gallon pails in the interior of the pressure tank?
Examples: For a single component coating spraying of 12 gallons of coating per 8 hour shift, we suggest a 15 gallon tank. For a 4 hour tank life plural
component coating, consuming 12 gallons per 8 hour shift, we suggest a 5 gallon tank.
Select pressure tank family, based on available features, in table below.
8
Select how many regulators you'll need.
Choose your regulation options from the table below. We recommend using a
regulator instead of a simple restriction (e.g. a "cheater valve") for greater control and to
avoid an initial blast of higher pressure air when you first pull the trigger on your spray gun.
Fluid Regulation
Oto 100 psi
Fluid Regulation
Oto 30 psi
Air Atomization
0 to 160 psi
Choose for
viscous or long
runs of material
Choose for short
runs of low
viscosity material
Choose for
better control of
atomizing air
Option 1: Single regulated
•
Option 2: Double regulated
•
Option 3: Single regulated
with improved low fluid
pressure control
Option 4: Double regulated
with improved low fluid
pressure control
II
•
•
•
8
Select your agitation option.
For coatings that remain well dispersed
over time, you may not need any agitation. If you
have either a low viscosity material, or a small
volume of material, direct drive agitation is an option.
For higher viscosity materials or larger volumes of
material, or where there is a risk of air entrainment,
we recommend a gear reduced agitator.
ILow
vi.oo•;ty I
materials or
•
•
•
None
Direct
Drive
•
smaller
volumes of
material
Higheni.oo•ity
materials or larger
volumes of material or
where air entrapment
could be a problem
15:1 Gear
Reduced
Binks• ASME Code PT Tanks
are a great choice in a 2 gallon pressure tank, spraying up to
80 psi of fluid pressure.
•
Choose zinc-plated lid and shell options (83C-) for solvent borne materials.
•
Choose stainless steel lid and zinc-plated shell options (83Z-) for waterborne materials.
Tank Size
Internal
Volume
(Gallon)
Head
Gasket
Bottom
Disposable Outlet
Liner
Kit
2 gallon, zinc
plated lid
1 gallon
pail
2.8
PT-33-1
PT-78-K60
SBBI-21-044
31
38
2gallon,
1 gallon
pail
2.8
PT-33-1
PT-78-K60
SBBI-21-043
31
38
ss lid
Service
Bulletin
Reference
Estimated
Estimated
Shipping Weights Shipping Weights
for Tanks without for Tanks with
Agitators (lbs)
Agitators (lbs)
Holds
Container
Size
2 Gallon PT Tanks I Specifications
Max Working Pressure, psi
80 psi (5.5 bar)
Air Inlet
1/4' NPS(m)
Fluid Outlet
3/8' NPS(m)
Fluid Outlet if using bottom
outlet kit
n/a
2 Gallon PT Tanks I Capacity and Dimensions
1 gallon
Standard paint container that
will fit inside
Inside diameter
9W
Inside height at center
9W
Overall height
20W
Overall width
13%'
-
• •
Binks• ASME Code PT Tanks
Zinc Platad
Ud and Shell
•
•
•
•
Stainless
Stael Ud and
Zinc Plated
Shell
Single
Regulated
(8-100 psi fluid
Double
Regulated
(8-100 psi fluid
preaure. 8-&0 psi
atomizing air
preaure)
preaure)
•
•
•
•
•
•
•
•
Direct Drive
Agitation
2 Gallon Tank
PartN•ber
83C-210
•
•
•
•
•
•
•
•
83C-211
83C-220
83C-221
83Z-210
83Z-211
83Z-220
83Z-221
II
NEW Binks• 183G- ASME Code Tanks give you app lication flexibility for most
solvent borne applications.
Tank Size
Holds
Container
Size
Internal
Volume
(Gallon I
2.8
Head
Gasket
QMS-80-1
Estimated
Estimated
Service Shipping Weights Shipping Weights
Bulletin for Tanks without for Tanks with
Reference
Agitators (lbsl
Agitators (lbsl
77-2927
45
59
Bottom
Outlet
Kit
183-3000
Disposable
Liner
PT-78-K60
Galvanized Tanks I Specifications
Max Working Pressure, psi
Air Inlet
Fluid Outlet
Fluid Outlet if using bottom
outlet kit
110 psi (7.5 barl
W NPT(ml
%' NPT(ml
%" NPT (ml or
* 'NPS(ml
Galvanized Tanks I Capacity and Dimensions
Standard paint
container that
will fit inside
Inside diameter
Inside height
at center
Overall height
Overall width
2Gallon
Tanks
5 Gallon 10 Gallon 15 Gallon
Tanks
Tanks
Tanks
1 gallon
5 gallon
5 gallon
5 gallon
9W
9W
14'
16'
14'
19Yls'
14'
26 Yls'
23Ys'
13%'
30o/1s'
18W
33%'
18W
43%'
18W
lllllKS
.
Larger handles for
increased portability
Binks• ASME Code Galvanized Carbon Steel Tanks
Single
Reg• llllad
•
•
•
I
Doullle
Siegle
lleglllllled Regul818d
willl Exira willl Exira
Sensitive Sensitive
Do•ble
Reu• l818d Reg• lator Reg• latar
Direct 15:1 Gear 2Gall•
Drive
Reduced TaakPart
Agitator Agitator Nunlber
5Gall•
TaakPart
Nulllber
10Gall•
TaakPart
Nulllber
1836-200
1836-210
1836-21 1
1836-213
1836-220
1836-221
1836-223
1836-230
1836-231
1836-233
1836-240
1836-241
1836-243
1836-500
1836-510
1836-1000 1836-1500
1836-1010 1836-1510
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1836-513
1836-520
1836-523
1836-530
1836-533
1836-540
1836-543
-
15Gall•
TaakPart
Nlllllber
-
1836-1013 1836-1513
1836-1020 1836-1520
-
-
1836-1023 1836-1523
1836-1030 1836-1530
-
-
1836-1033 1836-1533
1836-1040 1836-1540
-
-
1836-1043 1836-1543
•
NEW Binks• 183S- ASME Code Tanks
give you application flexibility with our best
chemical resistance. Suitable for waterborne coatings.
Tank Size
2 gallon
5 gallon
10 gallon
15 gallon
Holds
Container
Size
1 gal. pail
5 gal. pail
5 gal. pail
5 gal. pail
Internal
Volume
(Gallon)
Head
Gasket
Disposable
Liner
Bottom
Outlet
Kit
2.8
QMS-80-1
PT-78-K60
183-3000
9.8
QM-1458-1
PTL-408-K20
183-3001
11.8
QM-1458-1
PTL-412-K8
183-3001
19.8
QM-1458-1 PTL-415-K10
183-3001
Estimated
Estimated
Service Shipping Weights Shipping Weights
Bulletin for Tanks without for Tanks with
Agitators (lbs)
Agitators (lbs)
Reference
77-2927
38
52
77-2929
69
90
77-2929
71
90
77-2929
89
108
All 183S tanks
include fill port.
Stainless Steel Tanks I Specifications
Max Working Pressure, psi
Air Inlet
Fluid Outlet
Fluid Outlet if using bottom
outlet kit
110 psi (7.5 bar)
W NPT(m)
¥a" NPT (m)
%" NPT(m) or
%'NPS(m)
Stainless Steel Tanks I Capacity and Dimensions
lt1;;Kiii
•
Standard paint
container that
will fit inside
Inside diameter
Inside height
at center
Overall height
Overall diameter
2 Gallon
Tanks
5Gallon 10 Gallon 15 Gallon
Tanks
Tanks
Tanks
1 gallon
5 gallon
5 gallon
5 gallon
9W
14'
14'
14'
9W
16'
19ltls'
26 ltls'
23%'
30o/1s'
33%"
43%"
13%'
18W
18W
18W
5Gallon
Tank Part
Number
10Gallon
Tank Part
Number
Binks• ASME Code Stainless Steel Tanks
...........
Si•gle
D011ble
Sillgle
Reg•lated Reg•llllad
witll Exira with Exira
Seasitive Seaitive
Double
Reg•llllad Reg.lator Regulator
Direct 15:1 Gear 2Gallon
Drive Reduced Tank Part
Agitator Agitator Number
15Gallon
Tank Part
Number
I
5
9
2
4NE1
1
2t
hAv
e
.
50
322297
4
1
Por
t
l
a
nd,
OR9
7
22
0
80082
43
3
6
9
www.
f
i
ni
s
hi
ngt
e
c
hnol
ogi
e
s
.
c
om
SinKS.
www.binks.com
Saks and Service Through A Global Net·work of Industria/ Distributors
North American Office
Toll Free Customer Support and Technical Assistance
1951nternationale Blvd.
Glendale Heights, ll60139 USA
800-992-4657 USA & Canada Only
630-237-5000
888-246-5732 USA & Canada Only
Toll Free Fax
Cl2011 Binkl • PrintoclinUSA • All RighiS Ro..r;od AI83·100Rl1W2011l