IMPORTANT! !PL EA SE READ ENTIRE
IN ST RUCTION SHEET BEFORE ASSEM BLY!!
Oak Terrace Loveseat
Identify all parts packed i n the carton against the parts list. Remove all protective
materials. Place parts on a non-abras ive surfac e. If you are miss ing any parts or
are unsure how to proceed with assembly, please call custome r service center
immediatel y at 844-836-4055 (Monday-Friday, 9:am-5:00pm CST) or e-mail:
[email protected]
Do not attempt to assemble the product if any parts are missing or damaged .
Step 1
Place right armrest (A) on a flat, soft surface. Attach the chair backC) to the right
armrest (A) by inserting bolts (H) with metal washers (E) through each hole of
the right chair armrest (A) and into chair back (C) .
(warning: placing it on a hard surface wil l scratch the armrest).
(DO NOT TIGHTEN THE BOLTS COMPLETELY!)
PARTS LIST
A
RIGHT
ARMREST
2
G
BOLT
M6*40mm
3
B
LEFT
ARMREST
2
H
BOLT
M6*45mm
4
C
CHAIR BACK
2
I
PE CAP
11
D
CHAIR SEAT
2
J
HEX
WRENCH
1
E
METAL
WASHER
F
BOLT
M6*30mm
11
4
Step 2
Repeat for the left armrest (B).(DO NOT TIGHTEN THE BOLTS COMPLETELY!)
I
C
Step 3
Attach chair seeat (D) to the chair arm by using bolts (F) with metal washers(E)
through each hole of the chair arm and into the chair seat (D).
(DO NOT TIGHTEN THE BOLTS COMPLETELY!)
H
E
Step 4
Attach chair seat (D) to the chair back(C) by using bolts (G) with metal washers(E)
throught each hole of the chair seat (D) and into the chair back.
Step 5:
Tighten all bolts with the Hex wrench(J). Cover all bolts with the PE caps(I).
Place the cushion on the chair seat.
Your chair is now ready for use.
A
STEP 1
C
A
B
I
H
E
I
C
I
F
B
G
E
D
E
STEP 4
A
STEP 2
STEP 3
STEP 5