Accessories
Cylindrical Sensor Accessories 830-833
Limit Switch Sensor Accessories 834
Mini-limit Switch Sensor Accessories 835
Level Control Accessories 836
Photoelectric Sensor Reflectors 837-840
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
829
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Adjustable Bracket
Cylindrical Sensors
Mounting Brackets
Brackets are available for all diameter
cylindrical sensors. Made of tough
Crastin, the mounting bracket simplifies
mounting and sensor adjustment.
Order bracket by model number shown.
Universal Bracket
Model No. BF 5-30
Proximity sensors
Ultrasonic sensors
• Holds inductive,
photoelectric and
ultrasonic sensors of
all diameters
• Easy installation
• Simple adjustment
• Secure fastening
• Flexible
• Durable
Photoelectric
sensors
Fiberoptic
cable
The BF 5-30 handles
standard sensor
sizes from 5mm to
30mm in diameter
and provides 360°
rotation in 2 axes.
Model Number
BF5-30
Dimensions (mm)
E
12
54
18
25
A
12
25
67
8
25
B
D
14
Dimensions (mm)
5
15
Proximity sensors
Model Sensor
No.
Diameter
A
B
C
D
E
F
Slot Mounting
Width Screws
BF4.5
4.5mm
10
18
10
4.5
15
7
3.5mm
5mm
10
18
10
5
15
7
3.5mm
#6-32
6.5mm
16
26
13
6.5
20
8
3.5mm
#6-32
BF5
BF6.5
Ultrasonic
sensors
Photoelectric sensors
#6-32
BF8
8mm
16
26
13
8
20
8
3.5mm
#6-32
BF11
11mm
24
36
19
11
30
16
4.5mm
#8-32
BF12
12mm
24
36
19
12
30
16
4.5mm
#8-32
BF18
18mm
30
44
24
18
40
26
5.5mm
#10-24
BF30
30mm
40
56
36
30
40
24
5.5mm
#10-24
BF40
40mm
50
66
45
40
30
14
5.5mm
#10-24
Right Angle Bracket
UVW90-M30
Bracket
F
C
30
Proximity sensors
Dimensions (mm)
Angle brackets are available in three
diameter sizes and made of
stainless steel. Sensors can be
adjusted by using lock nuts supplied
with sensor. Order by
model number shown.
B
A
C
D
E
K
Model No.
UVW90-M30
Model Sensor
No. and Hole
Sensor Dia.
Dia.
A
F
G
F
G
Mounting
Dia.
2 Places
H
I
J
K
AB12
12mm
12.70
(1/2")
31.75
(1-1/4")
15.87 17.46 31.75
(5/8") (11/16") (1-1/4")
19.05
(3/4")
6.35
(1/4")
4.76
(3/16")
25.40
(1")
5.56
(7/32")
3.17
(1/8")
AB18
18mm
19.05
(3/4")
34.92 17.46 19.84 38.10
(1-3/8") (11/16") (25/32") (1-1/2")
22.22
(7/8")
6.35
(1/4")
4.76
(3/16")
25.40
(1")
5.56
(7/32")
3.17
(1/8")
9.52
(3/8")
6.35
(1/4")
38.10
(1-1/2")
9.52
(3/8")
3.17
(1/8")
B
AB30 30.96 50.80
30mm (1-7/32") (2")
830
C
D
E
25.40 36.91 63.50 31.75
(1") (1-29/64")(2-1/2") (1-1/4")
PEPPERL+FUCHS
H
I
J
Ultrasonic
sensors
Photoelectric
sensors
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Cushioned Mounting Bracket
Cylindrical Sensors
Two sleeves made of anodized aluminum and nickel-plated jam nuts will thread on
standard size proximity sensors (see ordering information table). The end cap is a
fiberglass reinforced nylon material and is tapered at 30° to protect the sensor
face from shearing. The mounts provide up to 10mm of protection against
overtravel of the target.
Ordering Information
Diameter
of Sensor
Model
Number
8mm
12mm
18mm
30mm
Cable Protectors,
Nuts and Washers
B.
C.
A.
CM-08
CM-12
CM-18
CM-30
D.
C (max)
30°
A
Features
• Protection against
accidental contact
• Easy installation
• Durable
• Flexibility for sensor
placement
• Secure fastening
D
B
A
Dimensions (mm)
B
C
M8 x 1
A.) “SM” Cable Protectors
Mount to the back of cylindrical sensor to
prevent cable from bending too close to sensor.
D
M16 x 1.5
11
10
M12 x 1 M22 x 1.5
11
10
M18 x 1 M30 x 1.5
15
10
M30 x 1.5 M47 x 1.5
25
15
A
Teflon Sensor Caps
Diameter
of Sensor
Order
Model Number
8mm
12mm
18mm
30mm
SM8
SM12
SM18
SM30
B
Features
• Repels Weld Slag
• Protects Sensors from
Impact Damage
• Models for shielded and unshielded
12mm, 18mm and 30mm diameter
inductive sensors
C
MODEL
A
TC-12
8.90
(0.35)
TC-12-U
15.0
(0.59)
8.90
(0.35)
TC-18
TC-18-U
TC-30
TC-30-U
15.0
(0.59)
8.90
(0.35)
22.7
(0.90)
B
C
Thread
16.1 0.75
(0.63) (0.03)
M12 X 1
22.5 0.75
(0.88) (0.03)
M12 X 1
34.5 1.27
(1.35) (0.05)
M12 X 1
B.) Steel Nuts
Jam nuts — supplied with all
cylindrical stainless steel sensors.
Diameter
of Sensor
Order
Model Number
5mm
8mm
12mm
18mm
30mm
M 5x0.5
M 8x1
M 12x1
M 18x1
M 30x1.5
1/2 NPT
Conduit
Adapters
C.) Knurled “S” Lock Washers
“S” lock washers secure the mounting
of cylindrical proximity sensors.
For 12mm diameter sensors
12mm diameter to 1/2" NPT
conduit
Length 2", Diameter 1"
Order number M12 – 1/2" NPT
Diameter
of Sensor
Order
Model Number
12mm
18mm
30mm
S12
S18
S30
For 18mm diameter sensors
18mm diameter to 1/2" NPT
conduit
Length 2", Diameter 1"
Order number M18 – 1/2" NPT
For 30mm diameter sensors
30mm diameter to 1/2" NPT
conduit
Length 2", Diameter 1-3/8"
Order number M30 – 1/2" NPT
PEPPERL+FUCHS
NPT adapter
Pg 9 to 1/2" NPT conduit
Length 7/8", Diameter 1"
Order number Pg 9 – 1/2" NPT
Model Number
M12-1/2" NPT
M18-1/2" NPT
M30-1/2" NPT
Pg 9-1/2" NPT
D.) Plastic Nuts
Supplied with all cylindrical
Crastin sensors.
Diameter
of Sensor
Order
Model Number
12mm
18mm
30mm
P 12x1
P 18x1
P 30x1.5
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
831
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Cylindrical Sensors
Exchanger Bracket
Exchanger brackets permit easy
installation and removal of standard
cylindrical shielded inductive sensors.
Designed for situations where periodic
sensor removal is required, the bracket’s
collet-style locknut secures the sensor in
place, eliminating the need to readjust the
sensor after reinstallation. The bracket
also features a stop shoulder to maintain
the sensing gap during sensor removal
and installation.
Ordering Information
Diameter
of Sensor
Model
Number
8mm
12mm
18mm
30mm
EXG-08
EXG-12
EXG-18
EXG-30
Dimensions (mm)
Model
Number
A
B
C
D
E
F
EXG-08
EXG-12
EXG-18
EXG-30
8.10
12.5
18.5
31.0
32.0
34.0
38.0
38.0
18.0
20.0
20.0
20.0
M12 x 1
M16 x 1.5
M24 x 1.5
M36 x 1.5
3.05
3.30
5.08
5.84
17.4
22.2
30.2
41.3
Dimensions (mm)
B
A
C
F
D
E
Ordering Information
Probe Tip Adapter
Diameter
of Sensor
The probe tip adapter attaches to
8mm or 12mm shielded inductive
sensor to create a probe-style limit
switch. The adapter has a 50mm
spring-loaded stainless steel probe
that activates the sensor when
displaced. The probe tip adapter is
ideal for in-die sensing or other
space-critical applications.
8mm
12mm
Model
Number
PTA-08-50
PTA-12-50
Dimensions (mm)
A
C
B
D
E
I
(Dia.)
F
H (Hex)
G
Dimensions (mm)
Model
Number
A
B
C
D
E
F
G
H
I
Probe Travel
PTA-08-50
74.9
31.8
31.8
M8 x 1
3.18
25.4
49.5
11.1
M8 x 1 to depth
of 20.0
For activation: 1.80 to 191
Maximum: 2.03
PTA-12-50
78.7
31.8
31.8
M12 x 1
4.75
25.4
53.9
15.8
M12 x 1 to depth
of 18.0
For activation: 1.42 to 2.03
Maximum: 2.15
Dimensions (mm)
Sight Glass Mount
The sight glass mount allows a 30mm diameter
capacitive sensor to be attached to a sight glass
for level detection. The mount is made of plastic
and includes stainless steel fasteners, and
accommodates 24.4mm to 44.5mm diameter
plastic or glass tubes. This mounting method
allows for easy sensor adjustment without
disturbing the fluid inside the tank.
Model No.
SG30
G
A
F
E
B
D
C
Dimensions (mm)
Model
No.
A
B
C
D
E
F -Sensor Dia
SG30
30
36.8
69
37.5
50.8
30mm*
G -Tube O. D.SG30
25.4 - 44.5
*(threaded or non-threaded)
832
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Cylindrical Sensors
End Stop Adapter
Ordering Information
The end stop adapter turns a
standard 8mm diameter shielded
inductive sensor into a durable
mechanical stop switch. Using a
hardened screw and spring-loaded
piston, the adapter threads over the
sensor. When the spring-loaded
piston is depressed, an internal
target moves and the sensor is
triggered. These adapters are useful
for applications where end-of-travel
signals are required and are available
in 25mm and 50mm lengths. Sensor
activation point is dependent upon
the insertion depth (0-1.5mm).
Barrel
Length
Model
Number
25mm
50mm
ES-08-25
ES-08-50
Dimensions (mm)
31.8
B
G
H
C
F
16.7
A
E
Dimensions (mm)
Model
Number
A
B
C
D
E
F
G
H
For use with
ES-08-25
ES-08-50
M8 x1
M8 x1
25.0
50.0
M8 x1
M8 x1
5.8
5.8
5.84
5.84
2.93
2.93
11
11
28.6
28.6
Shielded Sensors
Shielded Sensors
Block Cushion Mount
The spring loaded block cushion
mount provides surface-mountable
protection against accidental target
contact for standard shielded
inductive sensors. This mount
incorporates a block-shaped outer
housing, an inner sleeve that
secures the sensor, and a plastic
protective cap for the sensor face.
Ordering Information
Diameter
of Sensor
Model
Number
8mm
12mm
18mm
BCM-08
BCM-12
BCM-18
Dimensions (mm)
M
L
H
C
G
K
30o
E
A
F
D
B
Dimensions (mm)
Model
Number
A
B
C
D
E
F
G
H
I
J
K
Max
Overtravel
BCM-08
BCM-12
BCM-18
M8 x 1
M12 x1
M18 x 1
19.0
19.0
25.4
9.52
9.39
12.7
0.25
0.75
0.75
15.8
2.22
31.7
15.1
21.8
30.0
5.10
6.22
8.50
22.1
22.1
30.0
18.4
24.8
34.3
25.4
38.1
44.5
3.58
5.08
6.61
9.04
10.4
12.0
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
833
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Limit Switch Sensors
Photoelectric
limit switch sensors
Mounting Brackets
Y
Proximity
limit switch
sensors
Ultrasonic
limit switch
sensors
X
Can be turned 360°
Adjustable Unistrut® Bracket
Adjustable Slide Bracket
The adjustable Unistrut® type mounting bracket is especially
designed for the limit switch style sensors and can be adjusted
up to 20mm along the Y axis. It can be rotated 360° in
increments of 1.87° and fits into the Unistrut®. The bracket can
be moved along the X axis to the full length of the Unistrut®.
The bracket is furnished with four M5x20mm screws
and two headless screws. The Unistrut® mounting track
can be ordered in lengths of 2 feet.
To order specify MH4-2681 UNI.
Unistrut® is a
With this bracket the completely mounted
and wired sensor can be moved up to 30mm.
When the M5-16mm sensor mounting screws
are loosened, the sensor can be moved back
and forth easily.
16.5
Oblong hole
40 long x 15 wide
6.5
This allows precise adjustment of the sensing
point. The sensor can be secured in the
proper position by tightening the mounting
screws. Made of aluminum to resist corrosion.
To order specify model
number MH4-2057.
registered trademark
of the Unistrut
Corporation.
5
30
73
Model No.
MH4-2057
M5 (4 plcs.)
60
15
90
30
Model No.
MH4-2681 UNI
40
Dimensions (mm)
Mounting Instructions
Example 1: Position bracket on Unistrut® and lock in place with
snap lock screw. Then back off snap lock screw slightly to allow
movement of the bracket on the Unistrut®. Mount and fasten the
sensor loosely with two M5x20mm screws, using the elongated
holes. Then screw the headless screws into the round holes.
Align in the desired position, tighten screws to hold the sensor
firmly in place. Sensor can be removed from the mounting bracket
without affecting sensing range adjustment by removing the two
M5x20mm screws and lifting sensor up and over the two headless
screws. To remount the sensor, simply slide the sensor onto the
two headless screws and fasten the sensor tightly using the two
M5x20mm screws through elongated holes.
Example 2: Position bracket on Unistrut® and lock in place with
snap lock screw. Then back off snap lock screw slightly to allow
movement of the bracket on the Unistrut®. Mount and fasten the
sensor loosely with the mounting screws (M5x20mm). Align in
desired position and tighten the four mounting screws to hold
the sensor firmly in place.
834
PEPPERL+FUCHS
30
40
100
70
30
5
2
60
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Mini Limit Switch Sensors
30
15° 15°
Mounting Brackets
360°
rotation
R20
18mm Pilot Light (12-24 VDC)
50.5
66
14.5
40
IP67,
stainless
steel
housing
60
15° adjustments
20
10
Rotating
This mounting bracket
is used to provide
adjustment of the
sensor after mounting.
Canbe surface mounted
or mounted on 35mm
DIN rail.
Model Number
OMH4-4950
4.5
5
21
12.5
5.5
21
50
30.5
M4
This pilot light
provides ultrafor status indication
harsh-duty
bright
for almost any industrial
application including part bins,
machinery, conveyor lines and error
proofing. Available in red, yellow or
green (or all three combined), these
indicators feature an IP67,stainless
steel housing for harsh-duty
applications.
applications.
This
M12 x 1
52
Model No.
OMH4-4950
39
32
30
Quick Disconnect
Adjustable
This mounting bracket is
used to provide adjustment
of the sensor after mounting.
To order specify model
number MH4-3742.
M4 Tap
4
30
22
M4 x 8
Screw
M18 x 1
V1 Type
6
16
Male Receptable End View.
12
Max.
Yellow LED ( )
Black
Blue
( )
4
1
25
16
54.66
Green LED ( )
24 across the flats
4 thickness
Brown
3
2
White
Red LED ( )
4.2
Model No.
MH4-3742
Model Number
LED Color
LED18RYG-P
LED18RRR-P
LED18YYY-P
LED18GGG-P
Red, Yellow, Green
Red
Yellow
Green
Test Instruments
On-site troubleshooting can be a
problem without the
proper testing
equipment. With
P+F’s hand-held
tester, proximity
sensors can be
tested without having
to remove the sensor
from its installation.
With this compact
easy-to-read tester,
instructions are right
on the front of the unit.
You can check all 2-, 3- and
4-wire DC sensors and all 2- and
3-wire AC sensors.
If the tester is improperly connected to a
sensor, a safety feature prevents damage
to either the tester or the sensor.
To order specify model number 1-1350.
Model No.
1-1350
PEPPERL+FUCHS
The intrinsically
safe 2/Ex tester
is excellent for
testing sensors in
hazardous locations. It has a built-in
rechargeable battery with a nominal
voltage of 8VDC. When connected,
the function of the proximity sensor
is indicated on the LED display.
Designed for use in hazardous
locations to test
N/SN type outputs only.
The ST-03 is
a universal,
compact testing
device that fits
in your palm.
Features:
• The unit tests the operation of all DC
sensors in 2-wire, 3-wire and 4-wire
configurations, and all sensors built
according to DIN 19234, NAMUR.
• Will not damage sensors that are
connected incorrectly.
• Push-button terminals allow quick,
easy sensor connection.
To order specify model number ST-03.
To order specify model number 2/Ex.
Model No.
2/Ex
Model No.
ST-03
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
835
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Mounting Flanges and Sensor Wells for Level Control
Mounting Flanges
and Sensor Wells
Use of M-101, M-104 and M-112 wells keeps
tanks sealed if sensor is removed.
PVC ANSI
Mounting Flange
To order specify
model number PA-02.
Model No.
PA-02
Dimensions in mm
(unless otherwise specified)
19
22
98
Model M-112
178
Swivel Type
Mounting Bracket
Model M-105
*thru hole on
model M-105 only
After mounting, this bracket can
be adjusted in both directions.
To order specify
model number MH4-3505.
Model No.
MH4-3505
Models
M-101 and M-104
Y-axis
Sensor
Diameter
Model
Number
30mm Delrin
30mm Teflon
30mm Teflon (for ultrasonic)
40mm
Dimensions in mm
(unless otherwise specified)
M-101
M-104
M-105
M-112
*thru hole on
model M-105 only
1.72"
.945"*
52
7
65
65
X-axis
Conduit Adapter and Mounting Flange
for 30mm Diameter Ultrasonic Sensors
2.19"
1.03"
1-1/2"
NPT
.25"
1.90"
2.25"
104
M30x1.5
20
1/2" NPT
1-1/4" NPT
1-1/2"
across
the flats
42 24
1.90"
across
the flats
38
Stainless Steel
Mounting Flange
Dimensions in inches
(unless otherwise specified)
836
PEPPERL+FUCHS
Model No.
M-106
1/2" NPT
Aluminum Conduit
Adapter
Model No.
M30X1/2" NPT-ultra
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
FE-RR9
2.75" x 8.25" foil
reflective tape.
Can not be cut.
76.2
209.6
4.6
53
45
8
5
34
38
8
5
65
45
35
OFR 70
foil reflector,
self-adhesive
68 ± 0.5
70 ± 0.5
50.8
25.4
FE-RR7-sheet
sheet of 16
individual
1" x 2" foil
reflective tape.
Can not be cut.
68 ± 0.5
24
FE-RR6
2.2" x 1"x 0.37" rectangular
reflector with mounitng
holes on either end.
150° F max temperature.
FE-RR15
2.25" x 1.35"
x 0.30"
Reflector with
mounting ears.
Best with polarized
versions
70 ± 0.5
FE-RR1
3" diameter circular
reflector with 0.18"
diameter mounting
hole.150° F max
temperature
Reflectors
69.9
Dimensions (mm)
ORR 100
103
99
71
72.5
FE-RR8
2.8" x 2" x 0.30" high
efficiency acrylic
reflector w/ mounting
"ears". Best with
polarized versions
112
124.6
50
8
5
99
55
4.5
8.5
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Thickness = 9.0
837
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Reflectors
Dimensions (mm)
48
Reflector A48
self-adhesive
50.9
ORR 50
Thickness = 8.5
8
10
4.3
32.5
10
5
10
Reflector A80
self-adhesive
40
80
50.9
0.85
5.5
Reflector A25
self-adhesive
2.8
25.2
23.5
50
7.2
7.4
84
4.5
Reflector C110-2
0.85
7.4
2.8
Reflector A35
self-adhesive
34.5
32.8
25.2
5.7
6.5
Reflector Clip25
with expansion fit
12.8
13
46
41.5
Reflector Clip40
with expansion fit
40
6.5
Reflector A46
self-adhesive
2.25
6.5
5
8
838
PEPPERL+FUCHS
23.5
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Dimensions (mm)
Reflectors
40.5
7.4
34 ±0.5
7.5
Reflector H60
50.8
60
52 ±0.5
6.5
3.2
Reflector Clip50HT
with expansion fit,
micro-structure,
temperature rating
230° F maximum
12.6
3.5
55.5
84.5
77
8.7
116
132
77
3.2
5
Reflector H85
84.5
9
Reflector H116HT
temperature rating
230° F maximum
51.5
27
40
50
60
4.5
-40 ˚F
+
24VDC
G
-
42
32.5
4
1
10
4
4.5
48
57
Reflector H48
Reflector MA50
self-adhesive,
micro-structure
21
3
50
8
Reflector MA21
self-adhesive,
micro-structure
182
150
3.5
Reflector H180
-
F
Thickness = 8
7.4
+
24VDC
119
18
Reflector H160
-36 ˚F
110
3.5
5.8
Reflector
Heater120
heated for
temperatures
down to -40° F,
24VDC supply
voltage, 8W,
for use with V1
mating cordset
3.5
PEPPERL+FUCHS
6.5
10.5
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
839
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com
Accessories
Reflector Mclip 15HT
with expansion fit,
micro-structure,
temperature rating
230° F maximum
21
4
Dimensions (mm)
Reflector MS21
micro-structure
with threaded
screw
M3
Reflectors
15
3.7
6.5
8.4
12.6
25.2
7.5
Reflector Mclip 21
with expansion fit,
micro-structure
M4
Reflector S25
with threaded
screw
21
3
6.5
8.4
12.8
41
9.5
Reflector S42
with threaded
screw
20
26
32
M5
3
20
Reflector MH20
micro-structure,
especially suitable
for lasers
3.5
10
4.3
6
50
23
19
60
2
4.9
Reflector MH23
micro-structure,
especially suitable
for lasers
19.2
Reflector VR10
2
9.7
13.8
1
H
Reflector MH56
micro-structure
10
2
L
62
56
50
RT Series Self-Adhesive Reflective Tape
3.5
MODEL
3.5
840
PEPPERL+FUCHS
RT1 x 100
RT1 x 2
RT2 x 100
RT3 x 100
H
L
1.0"
1.0"
2.0"
3.0"
100"
2.0"
100"
100"
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: [email protected]
Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com