FOLDING ROUND DINING TABLE SET
MPG-TBS01-T
Please check contents before assembly. If any items are missing or damaged, do not take the unit back to
the store. Call (416) 597-2291 for customer service and we will save you time by correcting any problems
directly for you.
COMPONENTS
Base
C - Center Cross Beam x 1
A -Table Leg x 4
D - End Cross Beam x 2
B - Table Leg Cross Beam x 2
E - Center of Table Top x 1
Table Top
F - Side of Table Top x 2
HARDWARE
TOOLS REQUIRED
(M7 x 90 mm) x 4 Pcs
(M4 x 15 mm) x 18 Pcs
#2
Phillips
Screwdriver
washer x 8 Pcs
(M7 x 60 mm) x 6 Pcs
Allen Key x 1 Pcs
(M8 x 60 mm) x 8 Pcs
NOTE: • Read all assembly, use and care instructions, before starting.
page 1
v.3.0
M
E R R Y
P R O D U C T
S
FOLDING ROUND DINING TABLE SET
MPG-TBS01-T
Ax4
figure 1
Bx2
STEP 1 Insert the doweled ends on the Table Leg Cross Beams (B) into the Table Legs (A).
Secure with Bolts (1) and tighten using the Allen Key (6).
C
figure 2
Dx2
STEP 2 Insert the doweled ends Center Cross Beam (C) and End Cross Beams (D) into the
Table Leg Cross Beams.
Secure with Bolts (2) and tighten using the Allen Key (6).
page 2
v. 3.0
FOLDING ROUND DINING TABLE SET MPG-TBS01-T
x3
E
figure 3
Fx2
STEP 3 Lay the table top panels gently upside down as shown in Figure 4.
Secure the Sides of the Table Top (F) to the hinges of the Center of Table Top (E) using 3
(4) Screws for each hinge.
Secure using Phillips screwdriver.
x2
x2
figure 4
STEP 4 Flip the Base of the Table upside down and place Table Leg ends into place.
Secure with washers (5) and (3) Bolts using Allen Key.
page 3
v.3.0
M
E R R Y
P R O D U C T
S
FOLDING ROUND DINING TABLE SET MPG-TBS01-T
USE INSTRUCTIONS
•
Once assembled, the sides of the table top (F) will hang down. This is the folded position.
E
Fx2
figure 5
•
To secure sides of the table top (F) into a table position, secure one side at a time. Lift the side of
the table top (F). Reach underneath to pull the support beam out from the center of the table top (E).
Slide the support beam underneath the side of the table top until it stops.
F
figure 6
Support Beam
Support Beam
Support Beam
figure 7
•
To fold the table back down, hold the side of the table top (F) and push the support beams back
into the center of the table top (E). Gently lower the side panels into the folded position.
page 4
v. 3.0
FOLDING ROUND DINING TABLE SET MPG-TBS01-T
CARE INSTRUCTIONS
MERRY PRODUCTS’™ FURNITURE may be used both indoor and outdoor.
•
•
Thank you for choosing MERRY PRODUCTS’™ FURNITURE. With little care and maintenance of
the Folding Round Dining Table Set, MERRY PRODUCTS’™ FURNITURE will provide you with comfort and
enjoyment for many years to come!
The Folding Round Dining Table Set has been treated with an oil-based stain. If used outdoors,
staining or repainting with an oil-based weatherproof coating of your choice before use, and
continued once a year, may increase the life expectancy and maintain the look of
MERRY PRODUCTS’™ FURNITURE.
Cover the Table Set during harsh weather to keep it from weathering.
•
Rinse any panels with water to clean.
•
•
When assembling MERRY PRODUCTS’™ FURNITURE, please handle all panels and/or hardware
with care to avoid any possibilities of damages and/or injuries.
page 5
v.3.0