PEKOE® 23 x 18 SINGLE BOWL
STAINLESS STEEL KITCHEN SINK
18 GAUGE STAINLESS STEEL
PEKOE® 23 x 18 SINGLE BOWL
STAINLESS STEEL KITCHEN SINK
❏ 18SB.10231800.075
•Fabricated Single Bowl Stainless Steel
kitchen sink
•18 Gauge Stainless Steel
•Extra Deep 10" Bowl
•10mm radius corners
•Undermount installation
•Side and bottom sound pads with full spray insulation
•26" (660mm) cabinet required
•Includes:
- 7302282-401.0750A Bottom Grid - 9028000.075 Waste Fitting - 791676-100.0070A Undermount Sink Clips
- Cutout template
- Installation Instructions
•Limited Lifetime Warranty
Nominal Dimensions:
23" x 18" x 10"
(584 x 457 x 254mm)
Bowl Size:
21" (533mm) wide
16" (406mm) front to back
10" (254mm) deep
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Compliance Certifications - Meets or
Exceeds the Following Specifications:
• ASME A112.19.3
To Be Specified:
❏ Color: Stainless Steel .075 L35
© 2017 AS America Inc.
spec_18SB.10231800.075 Pekoe 23x18 SS KitchenSink 2/17
PEKOE® 23 x 18 SINGLE BOWL
STAINLESS STEEL KITCHEN SINK
18 GAUGE STAINLESS STEEL
10"
(254mm)
23" (584mm)
21" (533mm)
ø4-1/2"
(ø114mm)
6-5/16"
(160mm)
ø3-9/16"
(ø90mm)
ø4-15/16"
(ø125mm)
18"
(457mm)
16"
(406mm)
11-1/2"
(292mm)
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE SUGGESTED.
*FITTINGS
NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.3.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
L36
© 2017 AS America Inc.
spec_18SB.10231800.075 Pekoe 23x18 SS KitchenSink 2/17