MJK
PROCESS AUTOMATION
June 2012 - Prices may change without notification
257
PROCESS AUTOMATION
CONTENTS
MJK – Process Automation
Level Measurement
On-Off Level
 Float Switch 7030
259

Electrode Control 501
259
Ultrasonic Measurement
 Shuttle Ultrasonic Level Transmitter
260
Hydrostatic Measurement
 EXPERT Hydrostatic Level Transmitter 1400
262
 EXPERT Hydrostatic Level Transmitter 3400
263
Pump Controllers
 Pump Controller 701P
264
 Pump Controller 704
265
Flow Measurement
Open Channel Flowmeter  Ultrasonic Flow Converter 713
266
Electromagnetic Flowmeters
 MagFlux Converter
267
 MagFlux sensor Type 7200 with Australian flanges AS4087 PN16
268
 Accessories
269
Analytical Measurement
SuSix®Turbidity & Suspendid Solids Transmitter  Susix® Sensor
270
 SuSix® Converter
271
 Accessories for SuSix® Sensors
271
Oxix® Dissolved Oxygen transmitter
 Oxix® Sensor
272
 Oxix® Converter
273
 Accessories for Oxix® Sensors
273
pH, Redox & Temperature
 pHix Compact pH or Redox Transmitter
275
RTU and Controllers
Modular Micro Controller Mμ Connect
258
276
June 2012 - Prices may change without notification
MJK
On / Off Level Measurement
Float Switch 7030
The float switches 7030 belongs to a new generation of float switches where the mercury
switches used previously have been replaced with up-to-date environment friendly materials.
Float Switch 7030
Because float switches are often used in environmentally sensitive engineering systems such
as pumping stations and sewage plants, it is very important that the switches do not contain
mercury.
When used for control or alarm in pumping stations, the float switches can be easily damaged
during the replacement of pump and other machinery.
Features:
➤ Float switches without mercury!
➤ The float switch is made of polypropylene, an environment-friendly and strong material.
➤ Electro-mechanical contact system.
➤ The electro mechanical contact system with a voltage-free switch can withstand loads up to 16A allowing a motor starter to be connected directly.
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
202810
202811
7030-1013 Float Switch 12m cable
7030-1013 Float Switch 20 m cable
$202.70
$279.30
$222.90
$307.20
Discount Code: MJ1
Electrode Control 501
The Electrode Control 501 is a simple and low cost system for the control of level.
The system includes a level relay for DIN-rail mounting combined with a range of
different level electrodes.
The Electrode Control 501 is used for the control of e.g. a pump or for detecting
high or low levels and for a level alarm. A jumper bridge determines whether to
registrate a high or low level.
Electrode Control 501
Features:
➤ Price competitive and reliable system for the control of level in conductive liquids.
➤ The amplifier is easy to mount on a DIN-rail.
➤ The electrodes are delivered for suspension in cable and for mounting with 1” thread.
➤ For mounting a special bracket is available, which can be mounted directly on the wall
or in combination with MJK modular fittings.
Part No.
202820
202860
202865
Description
Level relay 501, 230 V AC
Electrode base with 1 electrode rod (max. 3)
Additional 1 m electrode rod for 202860
Additional electrode rod for 202860
List $
(Ex GST)
$342.30
List $
(Inc GST)
$376.50
$152.30
$167.50
$85.10
$93.60
Discount Code: MJ1
June 2012 - Prices may change without notification
259
PROCESS AUTOMATION
Level
Ultrasonic Level Transmitter - Shuttle
Ultrasonic Level Meter - Shuttle Sensor
Ultrasonic Level Meter - Shuttle
With MJK cabled sensors, it is easy to position the transmitter with the display, where it can be useful, and the large
display allows viewing from a distance. Shuttle has a one-step measurement start-up procedure that is easy to follow and
easy to modify the set-up of all functions, controls and signal management features. The advanced on-board software
ensures accurate and reliable operation even in difficult applications. Use the Shuttle® Ultrasonic Level Transmitter for level
measuring in tanks, wells, containers, weirs, flumes, canals, etc.
Shuttle® is an advanced microprocessor based ultrasonic level meter with an intelligent, precise
measuring system utilizing the latest hardware and software technology.
Shuttle® provides simple and
logical operation, using advanced technology resulting in a high quality product at a competitive price.
Features:
➤ Ultrasonic measuring system with 3 sensors measuring ranges from 10 cm to 25 metres.
➤ Learning-function allows the Shuttle®Level Transmitter to learn how the tank is arranged with piping, pumps and other tems that might disturb the measurement. The system also ignores turbulence and electrical interference, so even a slow moving mixer can pass through the ultrasonic beam without any influence on the measurement.
➤ 2 output relays for level / system alarm or pump control with duty and standby cycles.
➤ 4 - 20 mA output with zero and span adjustment.
260
June 2012 - Prices may change without notification
MJK
Level
Ultrasonic Level Transmitter Shuttle (continued)
Features:
➤ Indication of the strength of the echo signal with a bargraph.
Ultrasonic sensor
200570 / 200660
➤ Very narrow ultrasonic pulse signal gives great Data
Shuttlesensitivity
LeveltoTransmitter
sheet
signal strength and minimum
foam ®
and sludge on the surface of the liquid.
Dimensions
➤ Easy to read LCD-display for both setup and indication. Actual level is indicated with both a bargraph and with digits in millimetres, centimetres, metres, feet and inches. The digital readout can be chosen as either relative level or absolute level.
Order numbers
Ultrasonic sensor
200640 / 41 / 42
200630 / 31 / 32
Shuttle® Field L
201210
Sh
201215
Sh
an
201225
Sh
an
201235
Sh
an
201240
Sh
an
➤ 10 - 30 V DC or 230 / 115 V AC supply.
➤ FM approved sensors for hazardous areas.
Shuttle Level Transmitter
®
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
201215
Shuttle® Level Transmitter, complete with Shuttle® Ultrasonic Sensor 200570
Universal bracket
and 12 metres of cable, supply voltage 230 / 115 V AC or 10 - 30 V DC
$1854.30
$2039.70
Accessories
200219
Bracket for ultrasonic sensor, short
$140.70
$154.80
200220
Bracket for ultrasonic sensor, standard
$171.20
$188.30
Ultrasonic sensor
200570 / 200660
Discount Code: MJ1
Ultrasonic sensor
200640 / 41 / 42
200630 / 31 / 32
Hydrostatic Level Measurement
Sensor bracket, short
Sensor bracket, standard
MJK Expert™ hydrostatic level transmitters are designed for level measurement by submerging the transmitter
Order numbers
®
Field Levelhydrostatic
Transmitter complete
with Ultrasonichave
Sensora modern design with high
in open channels, drains and Shuttle
tanks. Expert™
level transmitters
Level Transmitter
without sensor, supply voltage 230 / 115 V AC or 10 - 30 V DC
201210plastic
Shuttle
functionality and the use of modern
and® steel
materials.
Shuttle® Level Transmitter, complete with Shuttle® Ultrasonic Sensor 200570
and 12 metres
of cable,
supplywaterworks
voltage 230 / and
115 V in
ACprocess
or 10 - 30tanks
V DC in the
plants,
pump
stations,
201215
MJK level transmitters are used in sewage
industry.
®
Level had
Transmitter,
complete with
Ultrasonic
Sensor 200632
201225
Shuttlehave
For more than 20 years MJK level
transmitters
a reputation
forShuttle
their ®high
accuracy
and stability, the
and 12 metres of cable, supply voltage 230 / 115 V AC or 10 - 30 V DC
ability to withstand rough industrial environments, their sturdiness and functional design and wide measuring
®
Level Transmitter, complete with Shuttle® Ultrasonic Sensor 200642
201235
Shuttle
ranges.
Accessories
200205
Un
200219
Sh
200220
St
200590
Co
690010
Ad
Ca
200570
Ul
200630
Ul
200631
Ul
200632
Ul
200640
Ul
200641
Ul
200642
Ul
200660
Ul
840010
Sh
840011
Sh
Distributed by:
and 12 metres of cable, supply voltage 230 / 115 V AC or 10 - 30 V DC
Shuttle® Level Transmitter, complete with Shuttle® Ultrasonic Sensor 200660
and 12 metres of cable, supply voltage 230 / 115 V AC or 10 - 30 V DC
201240
Features:
Accessories
➤ 2-wire 4 - 20 mA passive signal system.
➤ Sturdy design with housing from 200205
PPS, Universal bracket
polypropylene or stainless steel.
➤ Steel reinforced cable with
200219
high200220
tensile
Short sensor bracket
ultrasonic
sensor
➤ for
The
design
without
sharp edges prevents paper from sticking to the sensor
housing
Connection box for
cable or the diaphragm.
Standard sensor bracket
for ultrasonic
sensorand
particles,
textiles
strength.
200590
➤ Diaphragms from ceramic or 316L
steel.
690010
Additional cable for Shuttle® Ultrasonic Sensor.
Measuring
ranges
Can be extended➤
to 100
metres, specify
length from
0 - 0.3 m to 0 - 300 m
200570
Ultrasonic sensor, 30 kHz, range of 15 metres (fluids), with 12 metres of cable
200631
Ultrasonic sensor, 30 kHz, range of 25 metres (fluids), with 50 metres of cable
200632
Ultrasonic sensor, 30 kHz, range of 25 metres (fluids), with 12 metres of cable
200640
Ultrasonic sensor, 40 kHz, range of 12 metres (fluids), with 12 metres of cable
200641
Ultrasonic sensor, 40 kHz, range of 12 metres (fluids), with 50 metres of cable
200642
Ultrasonic sensor, 40 kHz, range of 12 metres (fluids), with 12 metres of cable
The Expert™ Level Transmitter Model 1400 and 3400 are approved according to UL and
200630
Atex for applications in hazardous
areas.Ultrasonic sensor, 30 kHz, range of 25 metres (fluids), with 12 metres of cable
June 2012 - Prices may change without notification
261
rammable range
PROCESS AUTOMATION
pressure
re range
iation, 0 point
re deviation, FS
0-1m
0-1m
0 - 3 m 0 - 10 m 0 - 10 m 0 - 30 m 0 - 100 m 0 - 300
Temperature deviation, FS Better than ± 0.01 % / °C
4 bar
4 bar
6 bar
10 bar
10 bar
18 bar
40 bar
40 ba
Linearity / Stability
Better than ± 0.2 % FS / ± 0.2 % FS
-10 °C to 70 °C
Measurement accuracy
Better than ± 0.1 % FS @ +10 to 30 °C
Better than ± 0.02 % / °C
Better than ± 0.2 % FS @ full temperature range
Longthan
time± stability
Better than ± 0.1 % FS per year
Better
0.01 % / °C
Materials
Better
than ± 0.2 % FS / ± 0.2 %Housing:stainlesssteel(AISI316L),diaphragm:96,6%
FS
TM
Supply
ent accuracy
Better
thanvoltage
± 0.1 % FS @ +10 to10-30VDC(12-30VDCforcablelengthsabove100
30 °C
Better than ± 0.2 % FS @ full temperature range
Output signal
2-wire4-20mA(passivetransmitter)
stability
Better than ± 0.1 % FS per year
2
Cable
2 × 0,5 mm2 (pressure)+5x0,15mm
(data),shielded
2 3
Expert™ Level transmitter 1400 series with improved accuracy for both high and low
Housing:stainlesssteel(AISI316L),diaphragm:96,6%Al
O /Cellpacking:Viton®
measuringCable
ranges. length
The transmitters are approved for mounting
hazardous 12 m
12 m in explosion
12 m
12 m
12 m
areas. 10-30VDC(12-30VDCforcablelengthsabove100m)
It has a capacitive measuring system and built-in breather tube for direct air pressure
tage
compensation.
Enclosure
IP68,withstandsastaticpressureequaltomax.overp
nal
2-wire4-20mA(passivetransmitter)
Expert™ Level transmitter 1400 series has the following features:
Approvals2
UL®Class1Division1GroupA-D,ATEX:II2GEExiaIIC
2
2 × 0,5 mm (pressure)+5x0,15mm
(data),shielded,PURinsulation
CE: EN61000-6-3/-4:2001,
EN61000-6-1/-2:1999,EN50
Features:
➀
Can
lengths on
gth
12
m be delivered
12 m with
12other
m cable
12 m
12 request.
m
35 m
110 m
320 m
Stability
EXPERT Hydrostatic Level
Transmitter 1400
➤ Application: Water Wells, Water Storage ➤ Measuring ranges between 0 – 30 cm and Processing
and 0 – 300m
IP68,withstandsastaticpressureequaltomax.overpressure.
➤ AISI 316L Housing
®
Hydrostatic Level Meter 1400
➤ Accuracy better than ± 0.1 % and UL Class1Division1GroupA-D,ATEX:II2GEExiaIICT5/T6and
stability 0.1 %/year ➤ Ceramic
diaphragm
CE:
EN61000-6-3/-4:2001,
EN61000-6-1/-2:1999,EN50014:1997 E, EN50020:2002
Order
Numbers
➤ 2-wire 4 - 20 mA Output signal
delivered with➤other
cable
lengths on request.
Ø 22mm
outer diameter
203911
Expert™ 1400,
203916
Exper
➤ PUR range
Cable 0 - 0,3 mWG
➤ Programmable zero point and span with mbers
flexible measuring
ranges
203912
Part No.
➤ Lightning
surge
Expert™ 1400,
range
0 resistance
- 1 mWG
Ceramic Measuring
203913
mWG Range
Description Expert™ 1400, range 0 - 3 Measuring
Cell Model
203917
List $ 203918
List $
(Ex GST)
(Inc GST)
Exper
Exper
203914
Expert™ 1400,
Exper
203911
Expert pressure transmitter
1400range 0 - 5 mWG
0 - 0,3 m
$1862.70202925
$2049.00
Expert™ 1400,
range
0 - 0,3 mWG
203916
Expert™ 1400,
range
0 - 30 mWG
203912
Expert pressure transmitter
1400
0–1m
$1862.70 $2049.00
All 1400
transmitters are
203915
Expert™
1400,
range
0
10
mWG
203913 range
Expert0pressure
transmitter
1400 203917
0 – 3Expert™
m
$1862.70
$2049.00
Expert™ 1400,
- 1 mWG
1400,
range
0 - 100 mWG
Expert pressure transmitter
1400
203915 range
Expert0pressure
transmitter
Expert™ 1400,
- 3 mWG
1400
Expert pressure transmitter
1400
Expert™ 1400,
- 5 mWG
203917 range
Expert0pressure
transmitter
152 mm
65 mm
MJK Expert™ 1400
Level Transmitter
Expert™
0 – 100
m (SG)
202925
$1862.70
$2049.00
1400,
range
0 - 300 mWG
$2334.20
$2567.60
1400,
special
meas. range
$3678.20
$4046.00
Discount Code: MJ1
MJK Expert™ 1400
All 1400 transmitters are UL and Atex approved.
Level Transmitter
Dia. 22 mm
262
0 – 30 m
$2049.00
MJKLevel
Expert™Transmitter
1400
152 mm
65 mm
Expert™ 1400, range 0 - 10 mWG
1400
0 – 10
m
Expert™
203918
$1862.70
73 mm
203916
0–5m
Cable
Level
(1 pc.
Cable bracket for MJK Expert™ 1400
Level Transmitter
Level Transmitter
(1 pc. with
is delivered
with
transmitter)
Dia.each
24 mm
(1 pc. is delivered
each transmitter)
Cable bracket for MJK Expert™ 1400
73 mm
203914
Dia. 24 mm
June 2012 - Prices may change without notification
Supply voltage
Better than ± 0.02 %Output
/ °C signal
10-30VDC(12-30VDCfor
Temp. deviation, zero point
Temperature deviation, FS
Better than ± 0.01 %Cable
/ °C
2 × 0,5 mm2 (pressure)+5x0,
Linearity / Stability
Better than ± 0.2 % FS
/ ± length
0.2 % FS
Cable
Measurement accuracy
Better than ± 0.1 % FS
@ +10 to 30 °C
Enclosure
IP68,withstandsastaticpress
Better than ± 0.2 % FS @ full temperature range
Approvals
UL®Class1Division1GroupA
Better than ± 0.1 % FS per year
CE: EN61000-6-3/-4:2001, EN6
➀
2 3
®
Can be delivered with other
cable lengths on request.
Housing:PPS(Ryton),diaphragm:99,9%Al
O ,cellpacking:Viton
2-wire4-20mA(passivetrans
MJK
12 m
12 m
12 m
Long time stability
EXPERTTM Hydrostatic
Materials
Supply voltage
10-30VDC(12-30VDCforcablelengthsabove110m)
Level Transmitter
3400
Output signal
2-wire4-20mA(passivetransmitter)
Order numbers
2
Order Numbers 2(data),shielded,PURinsulation
Cable is designed for use in waterworks,
2 × 0,5 mmsewage
(pressure)+5x0,15mm
MJK Expert™ 3400 Level Transmitter
treatment
12 m 3400,
12range
m
Expert™
0 -35
0.3mmWG 110 m
Hydrostatic Level Meter 3400
Cablewhere
lengthaccurate and long 12
m stable 12
m measuring
12 m
203951
plants and industrial applications
term
level
is required. It is very robust Enclosure
and designed for applications
in rough environments
with
IP68,withstandsastaticpressureequaltomax.overpressure.
203952
Expert™ 3400, range 0 - 1 mWG
®
aggressive chemicals and aggressive
is the programming
Approvals fluids. A major design
ULfeature
Class1Division1GroupA-D,ATEX:II2GEExiaIICT5/T6and
203953
Expert™ 3400, range 0 - 3 mWG
CE:
EN61000-6-3/-4:2001,
EN61000-6-1/-2:1999,EN50014:1997 E, EN50020:20
facility. With a standard USB interface and a laptop computer, the servicing transmitter
209954
Expert™ 3400, range 0 - 5 mWG
➀
be delivered
with other cable
can be programmed on-the-flyCan
to the
required measuring
range.lengths on request.
203955
Expert™ 3400, range 0 - 10 mWG
rder numbers
Expert™ Level transmitter 3400 series has following features:
Order Numbers
Features:
Dia. 50 mm
➤ PPS plastics housing
203955
Expert™ 3400, range 0 - 10 mWG
➤ Ceramic diaphragm, 99,9 %203956
pure
Expert™ 3400, range 0 - 30 mWG
203957
Expert™ 3400, range 0 - 100 mW
203958
Expert™ 3400, range 0 - 300 mW
135203961
mm
Expert™3400,range0-0.3m1"
32 mm
MJK Expert™ 3400
203962
Level Transmitter
Expert™3400,range0-1m1"R
203963
Expert™3400,range0-3m1"R
Expert™ 3400 w/ special meas. ra
202925
135 mm
➤ Ø 50 mm outer diameter
1” ISO
Expert™
3400,
resistant and can be used in 203953
tanks with chemicals
such
as range 0 - 3 mWG
a range of acids, bases and 209954
ferric chloride. Expert™ 3400, range 0 - 5 mWG
Dia. 50 mm
203951
Expert™
Dimensions
and3400, range 0 - 0.3 mWG
Accessories
203952
Expert™ 3400, range 0 - 1 mWG
➤ Application: Drinking, waste and process water, chemical Expert™ 3400, range 0 - 30 mWG
203956
36 mm
MJK Expert™ 3400 Level Transmitter
➤ Programmable zero point and span with flexible measuring mm
➤ Improved accuracy better than ± 0.1 %135
and
stability 0.1 %/year 10
MJK Expert™ 3400
Level Transmitter
236 mm
32 mm
Cable bracket for MJK mode
(1 pc. is delivered with each
1” ISO
Dia. 50 mm
mensions and
ranges.
ccessories ➤ Measuring ranges between 0 – 30 cm and 0 – 300m.
Dia. 50 mm
➤ 2-wire 4 - 20 mA Output signal
Cable bracket for MJK model
3400 (1 pc. is delivered with
each transmitter)
➤ High pull strength (1000 kg) PUR Cable
135 mm
Part No.
203951
203952
203953
203954
203955
203956
203957
203961
203962
203963
36 mm
Description
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
Expert ceramic / capacitive measuring
cell model 3400
60 mm
List $
(Ex GST)
List $
(Inc GST)
10m
0 - 0,3
$1792.40
$1971.60
0-1m
$1792.40
$1971.60
0-3m
$1792.40
$1971.60
0-5m
$1792.40
$1971.60
0 - 10 m
$1792.40
$1971.60
0 - 30 m
$2246.00
$2470.50
0 - 100 m
$3607.80
$3968.60
0 - 0,3 m, with thread conn.
$1792.40
$1971.60
0 - 1 m, with thread conn.
$1792.40
$1971.60
0 - 3 m, with thread conn.
$1792.40
$1971.60
Measuring Range
www.mjk.c
DK:
NO:
SE:
NL:
USA:
AUS:
+45 45 56 0
+47 69 20 6
+46 53 31 7
+31 251 672
+1 847 482
+61 3 9755
Discount Code: MJ1
June 2012 - Prices may change without notification
263
PROCESS AUTOMATION
Pump Controllers
MJK pump controllers come with either ultrasonic or hydrostatic level sensors, and are very suitable for monitoring and
control of levels in tanks and reservoirs. They provide many advanced functions like pump alternation over time, counting of starts and running hours for each pump, calculation of pump flow and integrated communication capability to
SCADA systems.
Pump Controller 701P
Pump Controller 701 is a compact unit for level control
of one pump and one level alarm or for two pumps
in alternating service. The Pump Controller 701P is
designed for DIN-rail mounting.
Pump Controller 701 is supplied either complete with
Expert™ Hydrostatic piezoresistive Level transmitter and
cable bracket or as a separate unit.
Suitable sensors for Pump Controller 701P are pressure
transmitter types 7070, 1400, 7060 and 3400.
Pump Controller 701P
Features:
➤ The Pump Controller 701P is supplied with a hydrostatic pressure transmitter with measuring ranges of 3, 10 or 30 m.
➤ Pump Controller 701P is calibrated via the front panel. The setting values are read on a voltmeter connected to the test sockets on the front, where 0 - 3 V corresponds to 0 - 3 m / 0 - 30 m, and 0 - 1 V corresponds to 0 - 10 m.
➤ Pressure transmitters 7060 and 3400 are made of polypropylene and suited for measurement in waste water and sludge.
➤ Pressure transmitters 7070 and 1400 are of stainless steel with a small outer diameter and are used for clean liquids, for example in water drillings.
Part No.
Description
List $
(Inc GST)
201950
Pump Controller 701, 4 - 20 mA input without sensor
$499.80
$549.80
201956
Pump Controller 701, 0 - 10 m (incl. 202935)
$2104.20
$2314.60
Please contact your local office for other options
264
List $
(Ex GST)
June 2012 - Prices may change without notification
Discount Code: MJ1
MJK
Pump Controller 704
The 704 Pump Controller is a microprocessor
controlled unit and can be used to control up to
four pumps or valves for inlet or outlet applications
between adjustable levels. Functions for control,
alarm, registration, counting and flow calculation
are selectable.
The MJK 704 Pump / Level Controller is delivered
with either an MJK Ultrasonic sensors or an Expert™
Hydrostatic piezoresistive Level transmitter. The Level
Controller is supplied with serial data communication
capabilities so that it can be connected to a SCADA
Pump Controller 704
System.
Features:
➤ Ultrasonic sensor, hydrostatic pressure transmitter ➤ Indication of level for use in dewatering or 4 - 20mA input.
installations or areas prone to flooding problems.
➤ Standard measurement ranges from 0 – 3 m up to 0 – 30 m in liquids, sludge.
➤ Text display for programming and reading ➤ Measures and records level, numbers of starts, pump running time, calculates capacity and output for each pump and total for the whole pumping station.
of measurement values with all indications in English and many other languages.
➤ 4 relays for control and alarms. (Or eight relays by serial connection of two 704 Pump controllers).
➤ Measurement units in mm, cm, m, ft, inches, bar, KPa, %.
➤ Duty and stand-by pump alternation.
Part No.
Description
Pressure
Transmitter
List $
(Ex GST)
List $
(Inc GST)
202040
Pump Controller 704P-1124, 0 - 10 m (incl. 202935)
7060
$3223.50
$3545.90
Discount Code: MJ1
June 2012 - Prices may change without notification
265
PROCESS AUTOMATION
Open channel Flow meter
Ultrasonic Flow Converter 713
Flow Converter 713 is designed for measuring and recording water flow in open ducts and channels. Flow Converter 713 is a
complete instrument for the measuring of instantaneous flow and recording of totalized water flow. It can be adapted to any
type of weir or flume.
nnel Flowmeter 713
Pressure transmitter
Expert 3400
Features:
Ultrasonic sensors
Converter 713
200570 -Flow
200580
1” ISO
32 mm
➤ Supplied with either ultrasonic or hydrostatic sensor.
➤ Maximum accuracy with measuring ranges down to 0-10cm.
➤ Flow Converter 713 is calibrated from the front panel.
➤ Easy to operate with setup information in English or other
user-specified language.
➤ Security access code can be programmed.
➤ Adaption to any kind of weir or flume.
➤ Built-in control of Sampler e.g. MJK 780.
135 mm
➤ Built-in totalizer with counter.
Ultrasonic sensors
200570-200580
➤ All values stored in an E2-prom.
➤ Indication of average flow (m3/hour) actual, the last hour, today, the last 24 hours.
➤ Indication of accumulated flow (m3) actual, the last hour, today, the last day.
➤ If 713 is set as an emergencyDia.
storm 50
flow mm
meter, the number of storm flows, storm flow time and volume as well as start and stop time for the last storm flow are counted.
➤ Alarm can be set for high and low flow, and excess of 1-hour- and 24-hour volumes.
Part No.
201455
Description
Open Channel flowmeter, 0-1 m with sensor 200580
Sensor stand
for flume
List $
(Ex GST)
List $
(Inc GST)
$3277.10
$3604.80
Discount Code: MJ1
266
Bracket
June 2012for
- Prices may change without notification
Ultrasonic Sensor
Flowmeter
MagFlux® Flowmeters are developed for measurements
in all types of conductive liquids, including measurement
of flow in drinking water, wastewater, sludge and process
MJK
Electromagnetic
Flowmeters
water and delivers very stable and highly accurate flow measurements due to the latest microprocessor
technology.
MagFlux® Flow Meters are manufactured in carbon steel and stainless steel for flange or wafer connection
and lining in hard or soft rubber and PTFE/PFA. The sensors have no moving parts to foul, create no hydraulic
influence on the flow, use a well-proven technology, and communicate using a standard protocol. MagFlux®
Flowmeter has a very userfriendly menu structure with all instructions in clear text - no symbols or codes are
used. The Display is unique in its design in which it can be mounted in three different ways: locally on the sensor,
remotely on a wall or mounted in a panel door. Furthermore, a single display can operate up to four Flow
Converters and Sensors.
MagFlux® Flow Sensors are available in sizes ranging from DN 3 to DN 1200, with standard construction lengths
and connections.
MagFlux® Flowmeters, Converters and Displays are supplied with a technically advanced enclosure made of
glass reinforced polycarbonate giving maximum protection against harsh industrial environments.
Features:
➤ Dimensions from 15mm to 1400mm / ½” to 54” as ➤ 4-20 mA output for flow in one or both ➤ Counters and pulse output with or without standard - other dimensions on request MagFlux® Flow sensor are in carbon or stainless steel with lining in hard rubber or PTFE/PFA.
directions
reset
➤ The converter can be delivered with or without display.
➤ Detection of empty pipe
➤ One single Display can operate up to four MagFlux® Flowmeters
➤ Modbus communication is utilized between the Display and the flow Converter and to other external devices.
➤ Simple and flat menu structure with easy navigation
➤ Large dynamic measuring range with an accuracy of up to 0,2% of the measurement range
protection
➤ Self-diagnosis with indication and logging of errors
➤ Automatic electrode cleaning
➤ Built-in datalogger with graphic display
➤ Two dynamic batch counters with password ➤ PC or keypad programmable and PC storage of settings and log data
➤ MagFlux® Flow sensors withstands submersion down to 10 m / 30 ft. static pressure
➤ User definable engineering units
Converter and Display Unit
June 2012 - Prices may change without notification
267
PROCESS AUTOMATION
MagFlux Converter
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
207925
With display, wall mounting 115/230 VAC
$1872.20
$2059.40
207926
With display, wall mounting 24 VAC
$1872.20
$2059.40
207927
With display, wall mounting 10-30 VDC
$1872.20
$2059.40
Discount Code: MJ1
MagFlux sensor Type 7200
with Australian flanges AS4087 PN16
Features:
➤ Mounting: Flange EN-1092-1 / ANSI B 16.5 / AWWA C207-01
➤ Ambient temp. range
➤ (Other flanges available: DIN , ANSI, AS4087
➤ Media temp. range: -10…80 °C / 15…175 °F
PN21, PN35)
➤ Compact converter: -10…60 °C / 15…140 °F
➤ Materials: Housing - Carbon steel
➤ Remote converter: -10…80 °C / 15…175 °F
➤ Enclosure: IP67, IP68 / NEMA 4, NEMA 6P
Flanges - Carbon steel
Lining - Hard rubber
Electrodes - Steel 1,4571 / AISI 316 TI
➤ From DN 25 / 1” and up, ground electrode is ➤ Accuracy: Better than ± 0,25 %
built in.
Flowmeter 7200
268
June 2012 - Prices may change without notification
with Australian flanges AS4087 PN16
MJK
MagFlux sensor Type 7200
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
287207-040-00
MagFlux 7200 Sensor DN 15 PN40
$1525.70
$1678.20
287210-040-00
MagFlux 7200 Sensor DN 20 PN40
$1556.10
$1711.70
287213-040-00
MagFlux 7200 Sensor DN 25 PN40
$1586.60
$1745.20
287216-040-00
MagFlux 7200 Sensor DN 32 PN40
$1617.00
$1778.70
287219-040-00
MagFlux 7200 Sensor DN 40 PN40
$1647.50
$1812.20
287222-016-00
MagFlux 7200 Sensor DN 50 PN16
$1516.20
$1667.80
287222-040-00
MagFlux 7200 Sensor DN 50 PN40
$1647.50
$1812.20
287225-016-00
MagFlux 7200 Sensor DN 65 PN16
$1663.20
$1829.50
287225-040-00
MagFlux 7200 Sensor DN 65 PN40
$1687.40
$1856.10
287228-016-00
MagFlux 7200 Sensor DN 80 PN16
$1663.20
$1829.50
287228-040-00
MagFlux 7200 Sensor DN 80 PN40
$1707.30
$1878.00
287231-016-00
MagFlux 7200 Sensor DN 100 PN16
$1648.50
$1813.40
287231-040-00
MagFlux 7200 Sensor DN 100 PN40
$1769.30
$1946.20
287234-016-00
MagFlux 7200 Sensor DN 125 PN16
$1996.10
$2195.70
287234-040-00
MagFlux 7200 Sensor DN 125 PN40
$2177.70
$2395.50
287237-016-00
MagFlux 7200 Sensor DN 150 PN16
$2232.30
$2455.50
287237-040-00
MagFlux 7200 Sensor DN 150 PN40
$2449.70
$2694.60
287240-016-00
MagFlux 7200 Sensor DN 200 PN16
$2975.70
$3273.30
287243-016-00
MagFlux 7200 Sensor DN 250 PN16
$3901.80
$4292.00
287246-016-00
MagFlux 7200 Sensor DN 300 PN16
$4899.30
$5389.20
287249-016-00
MagFlux 7200 Sensor DN 350 PN16
$6030.20
$6633.20
287252-016-00
MagFlux 7200 Sensor DN 400 PN16
$7183.10
$7901.40
287255-016-00
MagFlux 7200 Sensor DN 450 PN16
$8140.70
$8954.70
287258-016-00
MagFlux 7200 Sensor DN 500 PN16
$9310.40
$10241.40
287261-016-00
MagFlux 7200 Sensor DN 600 PN16
$10995.60
$12095.20
287264-016-00
MagFlux 7200 Sensor DN 700 PN16
$14365.10
$15801.60
287267-016-00
MagFlux 7200 Sensor DN 800 PN16
$16848.30
$18533.10
287270-016-00
MagFlux 7200 Sensor DN 900 PN16
$19952.10
$21947.30
287273-016-00
MagFlux 7200 Sensor DN 1000 PN16
$25334.40
$27867.80
287276-016-00
MagFlux 7200 Sensor DN 1200 PN16
$33519.20
$36871.10
287278-016-00
MagFlux 7200 Sensor DN 1400 PN16
$46376.40
$51014.00
287281-016-00
MagFlux 7200 Sensor DN 1600 PN16
$62736.50
$69010.10
Discount Code: MJ1
Electromagnetic Flow meter Accessories
Gel Potting Kit
If the MagFlux® Sensor is to be buried or submerged under water, the Converter and Display Unit must be remote
mounted, and the electrical connection to the sensor must be potted using gel potting kit part no. 579035.
June 2012 - Prices may change without notification
269
PROCESS AUTOMATION
Sheet
cations
TurbidityandSuspendedSolidsTransmitter
Sensor
Cable
➤ (2x2+1) x 1.0mm² (AWG 18/19)
®
SuSix
Sensor
➤ Colours:
Red,
white, blue, brown, black
➤ PUR Turbidity
0.001 - 9999 FNU/NTU 1)
Suspended solids
MagFlux Sensor Cable
0.001 - 400 g/l (SiO2)
List $
List $
Infrared-diode
system and beam focusing (l = 860 nm)
Description
(Ex GST)
(Inc GST)
Two-channel-90° scattered light measuring corresponding to DIN/EN 27027/
Gel potting kit IP 68
$211.10
$232.20
ISO7027
Additional
verification
by
six-channel
multi-angle
measuring
Sensor cable (per meter)
$22.10
$24.30
Six-channel, multi-angle with modified absorption
2 channels are used for absorption
Measurement principle
Part No.
Turbidity
579035
691080
Suspended solids
SuSix®Turbidity & Suspended
Solids Transmitter
Materials
Head: Stainless steel DIN 1.4460
Optical lenses: Sapphire
Wiper (optional): PA (GF), TPU
Cable
3 x 2 x 0.34 mm2, outer diameter Ø 8.3 mm
Cable length
10 m (customized lengths, optional 2)
Response time
Susix®
Sensor
Flow velocity
— Body: Stainless steel DIN 1.4435
— O-ring: Viton
— Cable: PUR
1 second
No limit
Power supply
V DCsensors
(15-30 V
DC)designed for
MJK SuSix®
turbidity and suspended 24
solids
are
Current consumption
Approx.
mA tanks, wells and
measurement
by immersing the sensor
into45open
containers
or in-line pipe mounting. TheRS
sensors’
6 optical
Output
485, 9600
baud,windows
2-wire and its
patented
measuring
system delivers measurements
from
turbidity
in clean
Accuracy
(turbidity)
Better than 3%
of actual
concentration
drinking
water to(susp.
suspended
sludge,
only one
sensor
Accuracy
solids)solids in heavy
Better
than all
5%from
of actual
concentration
(depends on calibration and media)
model.Temperature
The rangesrange
covered in turbidity 0are
0,001
to short
9999term
FNU to
/ NTU
/ FTU
- 60
ºC —
80 ºC
— with wiper 0 to 50 ºC
and suspended solids in the range from 0,001g/l to 400 g/l.
Enclosure rating
IP 68 to IEC 529 (10 m) / 10 bar pipe mounted, NEMA 6x
Weight
1,3 kgto handle tough applications.
The SuSix®
transmitter is rugged and designed
Approvals saphire optics, the PURCE:
EN61010-1,
The scratch-proof
cable
and the EN61326-1
heavy duty sensor — ATEX: Ex II 3G
1)
4000
upwards
manufacturer
norm.
housing
ensure
long FNU
life, internal
even where
scaling
and biofouling are problems.
2
) Can be delivered with other cable lengths on request.
Advantages:
nicalDimensions
➤
Easy calibration ➤ Strong correlation with laboratory results
onFitting
SuSix® Immersion fitting
order no. 155215
Susix Sensor
➤ High stability ➤ Universal sensor Wall bracket
➤ Built-in
for cleaning
extensionsystem (option) 240 mm
1” ISO RG
Extension for
➤ Built-in
loggerbracket
universal
➤ Network
ready
Universal
bracket
40 mm
1000 mm
Description
List $
(Ex GST)
List $
(Inc GST)
206310
SuSix sensor
$7535.90
$8289.40
206312
SuSix sensor with wiper
$9250.50
$10175.60
Part No.
475 mm
Discount Code: MJ1
270
SuSix®
sensor
June 2012 - Prices may change without notification
T
MJK
SuSix® Converter
The SuSix® Converter has a logical menu structure with mobile phone type navigation. There are also a number
of selectable languages in the large graphical display.
The SuSix® display indicates the measurement in engineering units and has a built-in data logger with a memory
of 160,000 data points with time/date stamp. The logged measurements can easily be transferred as a CSV file
to a PC using the buil-in USB port. This allows easy spreadsheet data analysis.
The SuSix® Converter has a 4-20mA output, two relays for control or alarms, and a digital input for automatic
range changes and more calibration curves. Alarms are also indicated as pop-up menus and stored in the
SuSix® converter’s alarm log.
The SuSix® display is configured by the operator so only the relevant data are indicated with an option to name
the display with a site tag name or number.
MJK’s SuSix® can work in networks with other SuSix® units, other MJK products, or with third party SCADA and
telemetry systems via is RS485 Modbus communications. The MJK Susix display can supervise, set-up and
operate up to four Susix or other MJK devices for enhanced economies of space and lower cost.
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
206304
Susix® Converter with display, 10-30 VDC
$1956.20
$2151.80
206305
Susix® Converter with display, 115/230 VAC
$1956.20
$2151.80
206306
Susix® Converter with display, 24 VAC
$1956.20
$2151.80
Discount Code: MJ1
Accessories for SuSix® Sensors
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
155240
Adaptor for SuSix immersion fitting ISO
$219.50
$241.40
155210
SuSix Insertion fitting
$3616.20
$3977.80
Discount Code: MJ1
June 2012 - Prices may change without notification
271
PROCESS AUTOMATION
Oxix® Dissolved Oxygen transmitter
Oxix® Sensor
Oxix® Dissolved Oxygen Transmitter is developed to measure
dissolved oxygen in water and wastewater processes. The optical
sensor has no consumable parts like membranes or chemicals,
is factory calibrated and almost maintenance free. The sensor’s
function is based on the fluorescence principle and does not
consume oxygen like standard membrane-type sensors. It is
rugged and designed to handle tough applications. The physical
outline and structure of the sensor reduce frequent cleaning to
a minimum. For extreme conditions a built-in air and water jet
cleaning system can be activated. When the sensor’s built in
tubing connection is connected to a valved air or water line, a
regular flushing of the optics can be controlled by the converter.
The Oxix® Transmitter has one 4-20 mA analogue output, two
digital outputs for process control and/or alarms, and one digital
input for resetting alarms, etc. It holds a large graphic display and
a user interface showing the actual measurement values. The
mobile phone-like menu system available in multiple languages,
together with the soft keys for operation, makes it very easy to
programme and control the instrument. The large build-in data
logger of the display unit offers 160,000 time-stamped entries. A
trend curve of the loggings for the overview of the local operator
is easily retrieved and shown in the display simply by activating a
one-push button on the unit.
The Oxix® dissolved oxygen transmitter is a unique system that
combines advanced electronics with a solid-state optical sensor.
No other dissolved oxygen system can compare with the features
and benefits of this revolutionary design.
Features:
➤ High performance optical sensor
➤ Large, easy-to-read display with trend curve ➤ No calibration
capability
➤ Multiple languages
➤ No spareparts needed in sensor’s expected 10 year lifetime
➤ Built-in datalogger
➤ Air or water jet cleaning via built-in nozzle ➤ No moving parts, oxygen consumption or risk of poisoning
➤ Measurements not affected by sunlight or dry environment
➤ Mounting accessories (optional)
Part No.
206510
Description
Oxix sensor w 10m cable
List $
(Ex GST)
List $
(Inc GST)
$4690.40
$5159.40
Discount Code: MJ1
272
June 2012 - Prices may change without notification
MJK
Oxix® Converter
The Oxix® Converter has a logical menu structure with mobile phone type navigation. There are also a number
of selectable languages in the large graphical display.
The Oxix® Display indicates the measurement in engineering units and has a built-in data logger with a memory
of 160,000 data points with time/date stamp. The logged measurements can easily be transferred as a CSV file
to a PC using the buil-in USB port. This allows easy spreadsheet data analysis.
The Oxix® Converter has a 4-20mA output, two relays for control or alarms, and a digital input for automatic
range changes and more calibration curves. Alarms are also indicated as pop-up menus and stored in the
Oxix® converter’s alarm log. The Oxix® display is configured by the operator so only the relevant data are
indicated with an option to name the display with a site tag name or number.
MJK’s Oxix® can work in networks with other Oxix® units, other MJK products, or with third party SCADA and
telemetry systems via its RS485 Modbus communications. The MJK Oxix® display can supervise, set-up and
operate up to four Oxix®or other MJK devices for enhanced economies of space and lower cost.
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
206304
Oxix® Converter with display, 10-30 VDC
$1956.20
$2151.80
206305
Oxix® Converter with display, 115/230 VAC
$1956.20
$2151.80
206306
Oxix® Converter with display, 24 VAC
$1956.20
$2151.80
Discount Code: MJ1
Accessories for Oxix® Sensors
Oxix® sensor adaptor
for immersion ISO
Oxix® sensor adaptor for
immersion ISO thread version
➤ PVC
Part No.
155243
Description
Adapter for Oxix immersion Fitting ISO
List $
(Ex GST)
$183.80
List $
(Inc GST)
$202.10
Discount Code: MJ1
June 2012 - Prices may change without notification
273
Oxix Float Ball
PROCESS AUTOMATION
Oxix® Ball Float
Ball Float
Data Sheet
Measuring dissolved oxygen near the water surface at a constant depth even as
Order Numbers and
Accessories
Oxix® Ball Float
the surface level changes, is required at many water treatment installations. The
155250
MJK Oxix® Ball Float rises and falls with the water level keeping the MJK Oxix®
Accessories for Oxix® Ball Float
Transmitter right where it needs to be. The flexible design includes a hinge bracket
155265
for a PVC pipe that clamps to a railing.
Ball Float for Oxix® sensor – ISO thread
155260
PVC pipe - PN10 - 50mm - (Ø50x2,4mm) 2 m
155261
PVC pipe- PN10 - 50mm - (Ø50x2,4mm) lb/m
Adaptor, pipe slip fit connection to ISO (50mmx40mm x1¼” ISO)
155266
PVC elbow 45 degree. slip fit connection (50 mm)
155268
PVC Closing Cap w/Female slip fit for PVC pipe 50 mm
579055
PVC glue, bottle containing 0,120kg
200205
Universal Bracket
200206
Hinged pipe bracket for pipe ø45-55mm
Mechanical Dimensions
This system also allows easy change outs of mechanical components and
(mm)
sensors. PVC pipes can be supplied locally and cut to length. The Oxix® Ball Float
155260
PVC pipe - PN10 - 50mm
installation simply uses a 45 degree elbow and adaptor fittings for complete
flexibility. Oxix® Ball Float components can be delivered separately to retrofit
155266
PVC 45 degree elbow, 50 mm
existing pipes, fittings, etc. on older or worn-out DO systems. This reduces the cost
of retro fitting with MJK Oxix D.O. monitoring systems.
155265
PVC Adaptor (50mmx40mm pipe slip
fit connection and 1 ¼” ISOFPT
Connection
1¼” ISO Thread
21mm
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
155250
Ball Float for Oxix Sensor ISO Thread
$492.50
$541.70
155251
Ball Float for Oxix Sensor NPT Thread
$480.90
$529.00
155250
Oxix Ball float
Surface
1 ½” ISO.
130mm
155265
PVC Coupler with ISO 1 1/4 thread
$93.50
$102.80
155266
PVC 45 deg 50mm
$71.40
$78.50
206510
Oxix sensor
Discount Code: MJ1
Denmark
The Netherlands
North America
www.mjk.dk
[email protected]
+45 45 56 06 56
www .mjk.com
[email protected]
+31 251 672171
www.mjk.com
[email protected]
+1 847 482 8655
Norway
Sweden
Australia
www.mjk.no
[email protected]
+47 69 20 60 70
www.mjk.se
[email protected]
+46 53 31 77 50
www.mjk.com
[email protected]
+61 3 9755 1529
Oxix® Hinged mounting for pipe ø45mm-55mm
for universal bracket
Rail mounted hinged pipe bracket for 50mm
PVC pipe on Universal Bracket 200505.
➤ Stainlees steel SS 316
Oxix Brackets
Part No.
200206
Description
Hinged Mounting Bracket for Railing
List $
(Ex GST)
$401.10
List $
(Inc GST)
$441.20
Discount Code: MJ1
274
June 2012 - Prices may change without notification
pHix Compact pH or Redox Transmitter
MJK
pH, Redox & Temperature
The pHix® Compact is a new and innovative pH and Redox transmitter designed for easy
installation and maintenance with electrode, transmitter, and mounting in one unit.
The unique design of pHix® Compact eliminates high impedance electrode connections
and special hardware for mounting. With union in one end and male thread in the other
end, pHix® Compact makes mounting in pipelines and open tanks very easy.
Another innovation is the simple 2-wire 4-20 mA connection with communication
capabilities for setup, electrode diagnosis, trouble shooting and calibration.
Also, a new double-junction electrode has been developed for the pHix® Compact with
lower impedance, increased electrolyte volume, increased junction area and longer
lifetime than traditional pH electrodes. The new electrodes can be used successfully in
wastewater, potable water and water with low ion concentration.
Features:
➤ pHix® Compact is made from ➤ Available with 4-20 mA output for pH / redox or with 2 galvanically separated 4-20 mA outputs for both pH and temperature.
➤ pHix® Compact is completely waterproof, and withstands a static pressure of 5 bar.
➤ No need for fittings or cables - both pHix Compact
electrode connections, transmitter and cable comes as one complete unit.
chemical resistent Ryton® (PPS) and 316 SS.
➤ pHix® Compact can be loop powered directly from an active 4-20 mA input e.g. a PLC or indicator.
➤ Automatic electrode monitoring.
➤ Communication capability with commands for all configuration parameters.
➤ Built-in temperature sensor.
pHix Compact
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
203110
pHix® Compact pH transmitter complete with electrode
(no. 160310)
$2739.50
$3013.40
203112
pHix® Compact pH and temperature transmitter complete with electrode
(no. 160310)
$2975.70
$3273.30
203120
pHix® Compact redox transmitter complete with electrode (no. 160312)
$2761.50
$3037.70
Discount Code: MJ1
June 2012 - Prices may change without notification
275
PROCESS AUTOMATION
Modular Micro Controller
Mμ Connect
Mµ connect
Mμ Connect® (pronounced ‘My Connect’) is an integrated control and monitoring Instrument. It is designed for the control of
pumping stations, small wastewater treatment plants and to measure and record over flow, control filters, raw water pumps
and booster pumps for water supply pump stations.
Mμ Connect® has advanced features for power optimization of pumps with the control of frequency and has functions for
calculation, data logging and communication with SCADA systems.
Mμ Connect® is modular and attached to a DIN rail mounting with a DIN rail bus system to simplify installation of additional
I/O modules. Mμ Connect® accepts both analogue and digital pressure transmitters. By using digital (Modbus) sensor
communication from a level transmitter Mμ Connect® will gain maximum measurement accuracy by avoiding A/D and D/A
conversion inaccuracies. With a wide selection of I/O modules, Mμ Connect® can be configured as simply as an alarm status
device or with the full functionality of a multi-variable process control PLC. Mμ Connect® has WIFI built-in and is operated with
a PC program Instrument Link and can be monitored and updated with a smart phone with graphic and flexible access to
data and controls.
Part No.
Description
List $
(Ex GST)
List $
(Inc GST)
205240
Mu ConnectR without modem
$2022.30
$2224.50
205243
Mu ConnectR with GSM/GPRS modem
$2422.40
$2664.60
Discount Code: MJ1
276
June 2012 - Prices may change without notification