PRODUCT SPECIFICATION
camera site
EM1400/EM2400 Mount
WALL MOUNT, LIGHT-DUTY, ENCLOSURE
Product Features
• Light Duty Wall Mount
• Adjustable Head
EM1400
• Supports up to 20 Pounds (9.07 kg)
• Accommodates EH4000 Series Enclosures and Light-to-MediumWeight Cameras
• Cable Feedthrough Hole Conceals Wiring (EM2400 only)
• Can be Adapted for Pole Mount Applications With Use of
PA101 Adapter
EM2400
The EM1400 and EM2400 are light duty wall mounts capable of
supporting a maximum load of 20 pounds (9.07 kg). These mounts
are primarily for use with our EH4010 and EH4014 enclosures, but
they can be used with other lightweight enclosures or light-tomedium-weight large format cameras.
2.00
(5.08)
Ø 0.281 (0.713), 3X
4.25
(10.80)
2.13
(5.14)
The EM1400 features a die-cast arm with an adjustable head,
which allows mechanical positioning of the camera or enclosure.
1.68
(4.27)
3.37
(8.56)
The EM2400 is constructed of aluminum and also features an
adjustable head, which allows mechanical positioning of the
camera or enclosure. In addition to the removable front end cap,
there is also a half-inch diameter cable feedthrough hole in the
mounting arm that conceals the camera or enclosure wiring.
11.36
(28.85)
2.75
(6.99)
1.50
(3.81)
Ø 0.281 (0.713),
3X
2.86
(7.26)
In addition, the EM1400 and EM2400 can be adapted for pole
mount applications when used with the PA101 pole mount adapter.
1.25
(3.18)
2.78
(7.06)
3.48
(8.84)
Ø 0.343 (0.87),
1X
5.26
(13.36)
10.53
(26.75)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
EM1400 DIMENSION DRAWING
C260 / REVISED 1-06
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
EM1400
Light duty wall mount for EH4010/EH4014
enclosures and light-to-medium-weight large
format cameras; manually adjustable swivel
head.
Light duty wall mount with cable feedthrough
for EH4010/EH4014 enclosures and light-tomedium-weight large format cameras;
manually adjustable swivel head.
EM2400
2.00
(5.08)
Ø 0.28 (0.71), 3X
Ø 0.50 (1.27)
4.25
(10.80)
2.12
(5.39)
3.37
(8.56)
1.68
(4.27)
MECHANICAL
Pan adjustment
Tilt Adjustment
EM1400
EM2400
360°
±75°
±90°
3.00
(7.62)
1.50
(3.81)
11.43
(29.03)
Ø 0.343
(0.87), 1X
2.78
(7.06)
3.50
(8.89)
5.28
(13.41)
GENERAL
Enclosure Mounting
Suggested
Mounting Method
Two 1/4-20 x 0.625 hex head machine screws
(supplied)
Secure to solid surface with three 1/4-inch
diameter fasteners (not supplied) or use one
5/16-inch diameter and one 1/4-inch
diameter fastener for center mount holes in
applications where wall studs are
encountered
Cable Feedthrough
(EM2400 only)
10.75
(27.31)
2.88
(7.32)
Ø 0.28 (0.71), 3X
EM2400 DIMENSION DRAWING
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
One 0.50-inch (1.27 cm) diameter hole in
mount arm
Construction
EM1400
EM2400
Finish
Maximum Load
Unit Weight
EM1400
EM2400
PA101
Shipping Weight
EM1400
EM2400
PA101
Die-cast zinc
Aluminum
Gray polyester powder coat
20 lb (9 kg)
1.56 lb (0.71 kg)
2.75 lb (1.25 kg)
0.88 lb (0.40 kg)
3 lb (1.35 kg)
4 lb (1.81 kg)
2 lb (0.90 kg)
PA101 POLE ADAPTER
Ø0.25 X 0.75 SLOT
(0.64 X 1.91), 4X
1/4-20 X 3/4 STUD, 3X
5.00
(12.70)
CERTIFICATIONS
• UL Listed (model EM1400 only)
2.86
(7.26)
OPTIONAL MOUNT ADAPTER
PA101
Pole mount adapter for EM1400 and EM2400
mounts. Stainless steel straps supplied.
Straps fit 3-inch (7.62 cm) to 8-inch (20.32 cm)
diameter pole.
1.00
(2.54)
0.875
(2.22)
2X
0.75
(1.91)
2X
4.00
(10.16)
2.725
(6.92)
REF.
PA101 DIMENSION DRAWING
0.425
(1.08)
1.30
(3.30)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150
International Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2006, Pelco. All rights reserved.