BELT DRYER
The Ingetecsa Belt Dryers are characterised by the absence of dead
zones and total accessibility for their maintenance and cleaning.
Multiple types of belts, cleaning systems, feed systems, etc. allow
us to offer customised solutions.
Our equipment has an outstanding thermal efficiency thanks
to internal gas re-circulation. The dryer can be subdivided into
multiple climatic zones, individually adjustable, so that perfect
control of the profiles of heating and drying speeds of the product
is achieved.
Drying
Reacting
Working principle:
The wet product is placed on a perforated belt which carries it
through the drying tunnel. Inside the tunnel the gases cross both
conveying belt and product layer. The dryer can be subdivided
into differentiated modules enabling adjusted flows, controlled
temperatures and moisture of the drying gas, and optimised belt
speed as well as overall energy consumption. The drying air can
be heated directly by combustion fumes or by built-in or external
heat exchangers. The tunnel’s sides are closed by doors that
facilitate significantly access to the interior. The Ingetecsa Belt
Dryers are easy to maintain due to the modular system design.
TYPES OF BELT DRYERS:
Outstanding thermal efficiency and control
of the drying process. Absence of dead
zones and total accessibility for its
maintenance and cleaning. Adaptable design.
HEAT RECOVERY:
Single-belt dryer
Multi-level dryer
PFD of a belt dryer with heat recovery.
Typical applications:
Granulated products which are not suitable for fluidisation and
require very careful mechanical and thermal treatment, or that
need long residence times.
Food Industry
HEATING AND VENTILATION SYSTEMS:
Potatoes, vegetables and fruit
Indirect heating: through hot water, saturated
steam or thermal oil with built-in exchangers.
Proteins and animal sub-products
Pulps and fibres
Direct heating: with fuel or natural gas burners
sending the flame directly inside the dryer
module.
Chemical Industry
Basic and intermediate chemistry
11
External indirect or direct heating: with exchangers
or burners installed externally and in accordance
with safety guidelines.
Vulcanisation accelerators
Colourings and pigments
TYPES OF BELT DRYERS:
Metallurgy and Mining
Metallurgy
Mining industry
Recycling and Disposal
Recycling
Industrial and sewage sludge
•
•
•
•
•
Chain-guided stainless wire mesh conveyor.
Chain-guided slat conveyor.
Chainless wire mesh conveyor.
Wire cloth belt with self-guiding wire.
Chain-guided belt of flexible slats.
FEED SYSTEMS:
Moving feed conveyor belt · Distribution conveyor
screw · Rotary paddle plate feeder · Linear
extruder · Predrying granulator.
INGETECSA · Ingeniería y Técnica del Secado s.a. · Roger de Flor, 49-51 · 08013 Barcelona · Spain · Tel. +34 932 466 544 · Fax +34 932 462 107
[email protected] · www.ingetecsa.com