UNIVERSAL ENCLOSURE OPTIONS
Inner Platform Base
Provides a handy platform, flush with bottom rackspace, for supporting heavy equipment and
mounting electrical boxes. Fits inside rack. See chart below for part #s.
Caster Base
With a 1,300 lb. weight capacity, our commercial grade caster bases are equipped with heavy
duty non-locking 3” swivel wheels and are UL Listed in the US and Canada. Fine floor caster
bases available, with a 700 lb. weight capacity. Each base comes with its wheels preinstalled to
save time, fits inside rack, and raises total rack height only w”. (ERK caster bases raise rack height
by 4”.) Caster base works with LF leveling feet, see pg. 29. NOTE: Inner platform base and caster
base do not fit VMRK-54 and VRK-44-31H racks.
Commercial Grade
Caster Base Part #
Fine Floor
Caster Base Part #
Inner Platform Base
Part #
CBS-WRK-32
CBS-WRK-32R
BS-WRK-32
WRK 32” deep
CBS-WRK-27
CBS-WRK-27R
BS-WRK-27
WRK 27” deep
BS-MRK-42
MRK 42” deep
–
–
BS-WRK-32
Fits
CBS-MRK-36
CBS-MRK-36R
BS-MRK-36
MRK 36” deep
CBS-MRK-31
CBS-MRK-31R
BS-MRK-31
MRK 31” deep
CBS-MRK-26
CBS-MRK-26R
BS-MRK-26
MRK 26” deep
CBS-DRK-31
–
–
DRK 31” deep
CBS-DRK-36
–
–
DRK 36” deep
CBS-ERK-20
CBS-ERK-20R
–
ERK 20” deep
CBS-ERK-25
CBS-ERK-25R
–
ERK 25” deep
Fine floor casters
constructed from
Dynatread TPR
to protect fine
flooring!
CBS-WRK-32
Seismic Floor Anchor Brackets
When properly installed, seismic floor anchor brackets bring any Seismic Certified DRK, WRK,
MRK, VMRK, VRK, ERK, SC, SCQ, SCRK and SCQRK Series enclosure to Zone 4 and
Seismic Use Group III Upper Floor Essential Equipment rating and have an
I p rating of 1.5.
Includes four brackets.
Part #
Fits
WRK-Z4
WRK Series
MRK-Z4
Seismic Certified
riser bases
available,
see pg. 29
DRK, MRK, VMRK Series
VRK-Z4
SEISMIC BRACKET
VRK Series
ERK-Z4
ERK Series
SC-Z4
SC, SCQ, SCRK, SCQRK Series
Rack Base Templates
Use these handy bottom templates for pre-installation of floor anchor bolts prior to the arrival of the
racks. Conveniently keyed to interlock, use two and “leapfrog” them to layout entire bays of racks.
Part #
MRK-TEMP-26
Description
WRK-TEMP-27
bottom template for WRK-XX-27
WRK-TEMP-32
bottom template for WRK-XX-32
MRK-TEMP-26
bottom template for MRK-XX-26
MRK-TEMP-31
bottom template for MRK-XX-31
MRK-TEMP-36
bottom template for MRK-XX-36
Rail Bracket Adaptors
Adaptors allow for the vertical mounting of rack panels or electronics between rackrail brackets.
Description
Fits
RBA-W44-1
Part #
1 space
44 space WRK
RBA-W44-2
2 space
44 space WRK
RBA-W44-3
3 space
44 space WRK
RBA-MV44-1
1 space
44 space MRK/VRK
RBA-MV44-2
2 space
44 space MRK/VRK
RBA-MV44-3
3 space
44 space MRK/VRK
RBA Series
rail bracket adaptor
shown with patch panel
Distributed by Multicom, Inc.
www.multicominc.com
1076 Florida Central Parkway, Longwood, FL 32750
Toll free: 800.423.2594 Phone: 407.331.7779 Fax: 407.339.0204
[email protected]