CATALOG NUMBER
everest
TYPE
Available with
three distributions
T5HO/HPT8 Fluorescent
Cold Storage
High Bay
Housing: Housing to be die formed, steel construction with
high-gloss baked white enamel finish over rust inhibiting phoscoat. Fixture is shipped fully wired with Sim-Flex “plug-and-play”
modular power cord system. Fixture is fully cowled and enclosed
with a gasketed, hinged, and latched acrylic lensed door.
everest
Optics: Optics to be high performance, faceted, extra wide and
deep Miro4 reflectors (95% minimum reflectance), with sharp
cutoff characteristics to maximize usable lumens and reduce
glare. Optics to be available in three distributions: Narrow for aisle
lighting, Medium for high bay applications, and Wide for low bay
applications.
Electrical: HPT8 technology: Ballast to be Instant Start, high
efficiency, Electronic, High ballast factor, Parallel lamp operation,
Universal voltage 120 - 277VAC, 50/60Hz, minimum Starting
temperature -22F (-30C), < 10% THD, High-power factor, Thermally protected, Automatic resetting, Class P, Anti-striation control, Sound rating A. Ballasts to be wired with Sim-Flex “plug-andplay” modular power cord system. T5HO technology: Ballast to
be electronic Program Start, 1.00 Ballast Factor, Universal voltage
120 - 277VAC, 50/60Hz, Starting temperature -20F (-29C), < 10%
THD, High-power factor, Thermally protected, Automatic resetting, Class P, Sound rating A. Ballasts to be wired with Sim-Flex
“plug-and-play” modular power cord system.
Everest
FEATURES AND BENEFITS
48.53”
• Exclusive external quick-connect, Sim-Flex “plug-and-play” wiring and sensor
systems provide maximum flexibility, ease of installation, and convenience
• Extra wide and deep MIRO 4 reflectors are available in 3 light distributions for
high utilization of light for a variety of applications
• Fixtures have two design variations to optimize the lamp output to fall within two
major temperature zones to give you more light vs. a single design fixture
• Efficient, electronic T5HO system can save up to 50% in energy costs vs. metal
halide; superior lumen maintenance, higher maintained lumens/watt, instant
re-strike and improved color rendition
• HPT8, NEMA Premium ballasts ensure superior lumen maintenance, higher
maintained lumens/watt, instant re-strike and improved color rendition
• Full cowling and tool free, hinged and gasketed doors for heat retention and light
optimization in cold environments
• Anti-vibration, rotary sockets for reliable lamp operation
Wiring: Fixture to be completely factory wired with Sim-Flex
“plug-and-play” modular power cord system. Optional Sim-Flex
Occupancy Sensor to have the capability of being added at a later
date with the “plug-and-play” cords without any wiring or tools.
Operation: Fixtures to be designed and optimize for peak
lamp output in two ambient temperature ranges: Refrigerated
Zone: 50°F to 32°F (10°C to 0°C) and Freeze Zone 32°F to -20°F
(0°C to -29°C).
Certifications: Fixture UL-cUL;
Mounting: Chain or cable hanging. Order mounting accessories separately.
Accessories: See ordering information.
Dimensions
49.06 ”
6.0”
20.00 ” (4L)
29.23” (6L)
24.53”
Sim-Flex Port
10.00” (4L)
14.62” (6L)
700 Ramona Avenue • Philadelphia, PA 19120 • 866.412.3662 • www.simkar.com
everest
everest
Everest Ordering Information
Series
Distribution
# Lamps
EVE
N = Narrow
M = Medium
W = Wide
4
T5HO
6
54T5H = 54W T5HO, 46”
(Not included
unless ordered) T8
32HP8 = 32W HPT8
Lamp Type
Ballast
Switching
Voltage
Zone
E = Electronic (T5HO only)
CS = Customer Specified
For 6 lamp units
Blank = dual ballasts
(4L/2L)
For 4 lamp units
Blank = dual ballasts
(2L/2L)
4L = (1) 4-lamp ballast
U1 = 120V – 277V
U3¹ = 347V – 480V
347¹ = 347V
480¹ = 480V
R =Refrigerated Zone
50°F to 32°F (10°C to 0°C)
F = Freeze Zone
32°F to -20°F (0°C to -29°C)
1 Contact factory for availability or custom offerings.
everest
Options
Wiring (Required)
Mounting Accessories
BP = Bulk Pack, Palletized
ELS1 = Emergency Lighting (low lumens)
ELS2 = Emergency Lighting (medium lumens)
ELS3 = Emergency Lighting (high lumens)
Lamps
835K = 3500 K Lamp installed
841K = 4100 K Lamp installed
850K = 5000 K Lamp installed
See Sim-Flex power cord ordering logic below
CA24 = Chain Hanger Assembly: (2) 18” chains, (2) “V” hooks, EWG4 = Heavy Duty Wire Guard, 4 lamp fixture
(2) “S” hooks for total drop 24”
EWG6 = Heavy Duty Wire Guard, 6 lamp fixture
CS24 = Chain Hanger Assembly: (4) chains, (4) “S” hooks for
total drop of 24”
Occupancy Sensors - see Sim-Flex ordering logic below
HKSC = Hook & Chain Assembly: Monopoint mount to four point
suspension. (Includes hook, chain, and mounting plate
CAB272 = Adjustable Cables: includes (2) 72” Y, steel aircraft
cables, tool-free adjusters and mounting hardware.
CAB472 = Adjustable Cables: includes (4) 72” steel aircraft
cables, tool-free adjusters and mounting hardware.
Accessories
Sim-Flex ordering logic
Power Cord
Prefix
Series
# Circuits
Length
Termination
Voltage
SFX
PC = Power Cord
1C = Single Circuit
2C = Dual Circuit; Universal voltage
(120-480); pigtails.
6 = 6’
BLANK = Pigtails
PS = Plug, straight blade (120V only)
PT = Plug, twist lock
BLANK = 120 - 480VAC (pigtails)
12 = 120VAC
22 = 208/240VAC
27 = 277VAC
34 = 347VAC
48 = 480VAC
Sensor Box (Control cord required for operation)
Prefix
Series
Model
Lens
Type (H models only)
Options
Voltage
SFX
SB = Sensor Box
S = (Standard; multipurpose lenses included)
H = High Performance (Lens option required
in next column)
1 = Aisle
1M = Aisle - Start/End
3 = Low Bay
4 = High Bay
BLANK = PIR Occupancy Sensor
C = Cold Temperature
(-40˚ to +40˚F)
12 = 120VAC
22 = 208/240VAC
27 = 277VAC
34 = 347VAC
48 = 480VAC
Control Cord
Prefix
Series
# Circuits
Ballasts # Controlled
SFX
SC = Sensor Control Cord
1C = Single Circuit
2C = Dual Circuit
1=1
2=2
3 = All*
*Use also for single ballast fixtures. Not for use with dual circuit configurations.
700 Ramona Avenue • Philadelphia, PA 19120 • 866.412.3662 • www.simkar.com