RGB 270
Features and Benefits
• Seamless source of dot-free illumination
• Tri-chip RGB LEDs
• Compatible with RGB controller or DMX 512
• Viewing Angle of 270 degrees
• UL/cUL, CE, TUV and RoHS Compliant
• Bending Diameter of 120 millimeters/4.72 inches
• Fabricated with Eco-friendly, UV-resistant PVC materials
• Three Year Manufacturer’s Warranty
Vivid RGB delivers remarkably fluid color transitions by utilizing advanced DMX and
LED dimming technology. Using our exclusive Triple-Extrusion technology, Vivid RGB
brings you discernibly richer, truer color. Visibly uniform and flicker free, Vivid RGB
transitions like no other – even in high frame-rate environments. Seen by millions
at the 2016 Grammy Awards.
For more information
please contact
toll free: 1.888.580.NEON (6366)
email: [email protected]
www.ledneonflex.com
E347880
RGB 270
Vivid RGB
Technical Specifications
11.5 x 29mm / .45 x 1.14in
Color
CCT Wave Length
LED Light
SMD, RGB Light Chip
Running Length
Single feed: 10 meters / 32.8 feet
Double feed: 20 meters / 65.6 feet
Red
Green
Blue
620 - 630 Nanometer
520 - 530 Nanometer
465 - 475 Nanometer
Light Surface
Rounded profile 270°
Lumen Maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°
50,000 Hours L70 @ 50° : 70,000 Hours L50 @ 50°C
Chromaticity Ordinates
x: 0.4715 y: 0.4276 u: 0.2624 v: 0.5354
Color Bin Tolerances
+/- 3 %
Efficacy (lm/w)
19.88
Output
CRI88
Electrical
Input Voltage
24V DC Constant Voltage
Power Consumption
12 watts per meter / 3.66 watts per foot
Power Factor
≤1
LED Count
60 LEDs per meter / 18 LEDs per foot
Dimming
110-277v 0- 10v & Magnetic Low Voltage
Physical
Materials
Polyvinyl Chloride (PVC)
LED Spacing
16.7 millimeter / .66 inch
Cutting Length
10 cm / 3.94 inches - 6 LEDs
Package Size: 340 × 340 ×240 millimeters / 13.4 × 13.4 × 9.4 inches
Package Weight:
10.5 kilograms / 23.1 pounds
Thermal Management
Cool to the Touch, Free Air Convection
Fixture Connections
Front & End Leader Cables
Lumen Count
Color
Lumen/m
Red
Green
Blue
R+G+B(white)
>22lm
>90lm
>18m
>130lm
Power/m
12 W
Profiles
29 mm
1.14 inch
Dimensions
Colors Available
11.5 mm
.45 inch
Mounting
Bend Tolerances
Maximum Diameter
(lateral bending only)
120 millimeters / 4.7 inches
Temperature Ranges
Ambient -30° to 45° Celsius / -22° to 113° Fahrenheit
Operating
-20° to 45° Celsius / -13° to 113° Fahrenheit
Humidity
0- 95% Non Condensing
Dependability
Warranty
3 years
Safety
Certification
Tested to UL & CSA by Underwriters Laboratory for use in USA and
Canada, complies with California Title 24 Requirements, Lighting Facts.
Exceeds ANSI C78.377A, CE & RoHS Compliant.
IP Rated
IP68 Factory Order/ IP68 with Accessories
*For DMX controller inquiries please check our website or call for customer service.
**Photometric Data available upon request or at www.ledneonflex.com
E347880
www.ledneonflex.com
RGB 270
3
Year
270°
3 Year
Minimum Bend Diameter
12
0m
m
nch
01
i
4.7
01 |0
01
|0
|0
2
2
2
2
0 1 |0
Photometric Data
270°
CCT
>22lm
>90lm
>18m
>130lm
Candle Power Distribution
www.ledneonflex.com
Illuminance Characteristics
RGB 270
Injection-moulded End Fittings
Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Factory orders only.
Bottom Exit Cable
LN-11X29-RGB-FA-PFB
LN-11X29-RGB-FA-PFB-1m
LN-11X29-RGB-FA-PFB-3m
18mm
11.5mm
Side Exit Cable
16.5mm
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
LN-11X29-RGB-FA-PFS
LN-11X29-RGB-FA-PFS-1m
LN-11X29-RGB-FA-PFS-3m
1.8mm
29mm
Connects light to power supply with
pre-installed side cable, IP68.
The following cable lengths are available.
(For longer lengths please contact us)
Length
41.8mm
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
30.8mm
Connects light to power supply with
pre-installed bottom cable, IP68.
The following cable lengths are available.
(For longer lengths please contact us)
Length
1.8mm
16.5mm
Φ12mm
11.5mm
18mm
22.5mm
Part Number
0.3m / 0.98’
LN-11X29-RGB-FA-PFE
LN-11X29-RGB-FA-PFE-1m
LN-11X29-RGB-FA-PFE-3m
1m / 3.2’
3m / 9.8’
Φ12mm
Φ
29mm
End Cap
Part Number
1.8mm
16.5m m
30.8mm
Pre-installed termination protection
of the light, IP68.
18mm
11.5mm
30.8mm
Length
30.8mm
Connects light to power supply with
pre-installed end cable, IP68.
The following cable lengths are available.
(For longer lengths please contact us)
Φ12mm
End Exit Cable
LN-11X29-FA-EC
11.5m m
www.ledneonflex.com
15mm
RGB 270
End Fittings
Stocked accessories. Standard on non-factory orders.
Power Connector
21m m
Connects light to power lead, IP68.
The following cable lengths are available.
(For longer lengths please contact us)
Length
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
LN-11X29-IP68-RGB-300-L / LN-11X29-IP68-RGB-300-R
LN-11X29-IP68-RGB-1M-L / LN-11X29-IP68-RGB-1M-R
LN-11X29-IP68-RGB-3M-L / LN-11X29-IP68-RGB-3M-R
57mm
Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate *1
Connects light to power lead, IP68.
The following cable lengths are available.
(For longer lengths please contact us)
Length
1m / 3.2’
3m / 9.8’
Part Number
LN-11X29-IP68-1M-RB
LN-11X29-IP68-3M-RB
33mm
Bottom Power Connector
20.5mm
Feed connector * 1 (Four-pin), Silicone gasket * 1,
Aluminum Billet * 1, Crimp Plate *1
End Cap
43mm
21mm
Termination protection of the light. IP68.
Part Number
LN-11X29-IP68-END
Tail plug * 1
Silicone gasket *1
Aluminum Billet * 1
Crimp Plate * 1
33mm
37mm
Jumper
Connects two pieces of light together with a
flexible cable. IP68 connector.
Lengths Available
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.84’
LN-11X29-IP68-RGB-J30
L
LN-11X29-IP68-RGB-J1m
LN-11X29-IP68-RGB-J3m
Double-end connector *1(Four-pin), Silicone gasket * 2, Aluminum Billet* 2, Crimp Plate * 2
Power T-Feed
50mm
Connects two pieces of light together with
a T joint, powered from the middle. IP68
connector.
Lengths Available (L1 & L2)
Part Number
0.3m / 0.98’
LN-11X29-IP68-RGB-T
T joint * 1 (Four-pin),
Silicone gasket * 2,
Aluminum Billet * 2,
Crimp Plate * 2
L2
L1
Seamless Splice
Connects two pieces of light together
seamlessly.
Part Number
32m m
LN-11-IP40-RGB-SPL
Silicone gasket * 1
Joint PCB * 1
U steel plate * 2
Crimp Plate * 2 Please Note: Indoor only.
www.ledneonflex.com
m
63m
17 .5m m
33mm
RGB 270
Snap Fittings
Stocked accessories. Standard on non-factory orders.
Connector
Connects light to power lead, IP68.
The following cable lengths are available.
(For longer lengths please contact us)
Length
Part Number
0.3m / 0.98’
1m / 3.2’
3m / 9.8’
LN-11X29-IP68-SC-300
LN-11X29-IP68-SC-1M
LN-11X29-IP68-SC-3M
Feed connector * 1 (PC Cover), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1
End Cap
Termination protection of the light. IP68.
Part Number
LN-11X29-IP68-SC-END
Tail plug * 1
Silicone gasket *1
PC Cover * 1
Crimp Plate * 1
www.ledneonflex.com
Mounting Channel
RGB 270
.86 inch
Aluminum Mounting Channel
.54 inch
/.13 inch
Part Number
50 mm / 2 inch
LN-11-AL-CLIP
25 mm / .98 inch
/
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
1000 mm / 39.37 inch
LN-11-AL-1M-CHAN
100 mm / 3.93 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
.94 inch
Plastic Mounting Channel
.55 inch
Please Note: Production Order Only. 21 Day Lead Time.
/.13 inch
Part Number
300 mm / 11.81 inch
LN-11-PL-CLIP
50 mm / 1.96 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
1000 mm / 39.37 inch
LN-11-PL-1M-CHAN
100 mm / 3.93 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Model
www.ledneonflex.com
Self-locking Aluminum Mounting Channel
RGB 270
Uses: Ceilings and Vertical Installations
Part Number
50 mm / 1.96 inch
LN-11-CLIP-SL
25 mm / .98 inch
/
25 mm / .98 inch
/
Φ 3.5 mm / .13 inch
1000 mm / 39.37 inch
LN-11-AL-1M-CHAN-SL
100 mm / 3.93 inch
200 mm / 7.87 inch
150 mm / 5.9 inch
350 mm / 13.77 inch
Φ 3.5 mm / .13 inch
Optional Accessories
Male and Female Connectors
Cutter
Please Note: Factory order only.
*Installation guide available upon request or at www.ledneonflex.com
Part Number Naming Convention
LN-11X29-24-RGB
RGB - Fixture Color
24V - Voltage
11X29 - Profile Size
LN - LED Neon Flex
www.ledneonflex.com
Testing Results for LED Neon Flex
Performance
Standard/Reference value/Description
Optical Testing
Photometric test-integrating sphere system
IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length)
Photometric test-goniophotometer system
IES LM 79(lumen intensity distribution & Lux diagram)
Illuminance efficiency ratio
Product specification sheet
Uniformity of lighting surface (led neon flex light)
Evaluate indirect glare
RGB color mixture uniformity (led neon flex light)
Evaluate the uniformity of color
Lumen maintenance test
IES LM 80
Color-coordinate shift
ANSI C78.377
Electrical Testing
Normal Temperature Test (77°F)
UL1598, IEC60598-1
Normal Temperature Test(104°F)
UL1598, IEC60598-1
Reliability Testing
Lifetime test
IS TM 21
Electrical insulation test
UI2388, IEC60598-1, >4M Ω
Dielectric voltage withstand test
UI2388, IEC60598-1, >1.5KV
Waterproof test
IP68/IP67/IP65
Hi-Lo Temperature impact
-68°F – 140°F
Ultraviolet (UV) light exposure
ASTM G 26. Exposure Method 1
Salt spray test
IEC68-2-11
Anti-cracking test (-13°F)
Assess PVC’s anti-cracking property under low temp.
Connector pull test
50N
Mechanics Testing
Pull test (Connector, Body)
UI2388
Impact test
IEC 62262, UL2388
Bending fatigue resistance test
UL2388, IEC60598-1
www.ledneonflex.com
RGB 270
Charts
RGB 270
Power(w)
12
11
10
9
8
7
0
-25
-20
-15
-10
-5
0
10
15
20
25
30
35
40
45
50
55
60
Tc(℃)
Working Temperature vs. Power
Lumen(lm)
160
14 0
120
100
80
60
40
20
03
1
2
47
5
69
8
10
Length(m)
47
5
69
8
10
Length(m )
Lumen Output vs. Length of Light
V(v)
24 .0
22 .0
20 .0
18 .0
16 .0
14 .0
12 .0
10 .0
03
1
2
Working voltage vs. Length of Light
www.ledneonflex.com
RGB 270
Power Supply Configuration Table
The maximum length of light for different power supply ratings.
Power Supply
Rated Power /mtr
35w
60w
75w
80w
100w
120w
150w 185w
240w
320w
6.5w / 7.2w / 8w
3m
6m
7.5m
8m
10m
12m
15m 18m
24m
30m
10.6w / 11w / 12w 2m
3.5m
4.5m
5m
6m
7m
10m 12m
14m
20m
Feed Setup
Single Feed
Example: Double Feed
It is recommended to use one 80W power supply when loading maximum 8m light (7.2w/m) or
maximum 5m light (12w/m) when powering the light at one end.
(X,Y) Chromaticity Diagram
y 0.46
2700 K
3000K
0.44
3500K
0.42
4000K
4500 K
0.40
0.38
0.36
5000K
5700K
6500K
0.34
0.32
0.30
0.28
0.26 0.28 0.30 0.32 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54
x
www.ledneonflex.com
RGB 270
Project Details
Project Name:
Notes:
Warehouse Locations
United States
Canada
6230 W. Desert Inn Rd.
Las Vegas, NV 89146
T: (702) 749-5316
30 Milner Road
Moncton, NB E1E 2R8
T: (702) 749-5319
For more information
please contact
toll free: 1.888.580.NEON (6366)
email: [email protected]
www.glls.com
www.ledneonflex.com