Eugenol

Roth International, Ltd.
NFPA
Eugenol USP
0
0
0
SECTION 1 : Chemical Product and Company Identification
MSDS Name: Eugenol USP
Manufacturer Name:Chr. Hansen, Inc.
Department: Dental Products Manufacturing Division
Manufacturer MSDS Revision Date:
02/01/2002
Trade Names:
00-058125-00
CAS Number: 97-53-0
NFPA
Health: 0
Flammability: 0
Reactivity: 0
Other:
Distributor Name: Roth International, Ltd.
Distributor Address:
669 West Ohio Street
Chicago, Illinois 60610-3958
Emergency Telephone Number: 800 631-8305
Internet: www.rothendo.com
Distributor Telephone: 800 631-8305
Fema No: 2467
SECTION 2 : Hazardous Ingredients/Identity Information
Chemical Name
CAS#
Eugenol
97-53-0
Hazardous: Yes
SECTION 3 : Physical And Chemical Characteristics
Physical State/Appearance:
Clear Liquid
Color:
Colorless
Odor:
Characteristic Odor.
Vapor Pressure:
Not Applicable
Vapor Density:
(Air = 1): Greater Than 1
Boiling Point:
Not Applicable
Melting Point:
Not Applicable
Solubility:
In H2O: Insoluble
Specific Gravity:
(H2O = 1.0): 1.064
FlashPoint:
200 deg F
SECTION 4 : Fire And Explosion Hazards
Flash Point:
200 deg F
Flash Point Method:
Tag Closed Cup
Extinguishing Media:
CO2, Foam, Dry chemical
Fire Fighting Instructions:
Keep containers cool with fine water spray.
Unusual Fire Hazards:
None Known.
Dot Hazard Classification: Non-Combustible
SECTION 5 : Health Hazards
Eugenol :
Route of Exposure:
Skin
Potential Health Effects:
Health Hazard Determination:
This product is a "Mixture" for which no health hazard data exist. The Hazard
Communication Standard requires that such mixtures be assumed to present the
same health hazards as do components that constitute at least 1% of the mixture
(0.1 for carcinogens) although OSHA has noted that the hazards of individual
components may be altered by including them in a mixture.
Carcinogenicity:
Has the substance been listed as a Carcinogen or Potential Carcinogen in the "Annual
Report on Carcinogens" published by NTP, by the International Agency for Research
on Cancer, or by OSHA: No
Signs/Symptoms:
None Known
Other Potential Health Effects:
Overall Determination:
Liquid may be irritating to eyes and skin
Repeated contact may cause contact dermatitis.
Aggravation of Pre-Existing Conditions:
None Known
This product is a mixture some components of which we consider to be a trade
secret.
SECTION 6 : Emergency And First Aid Procedures
Eye Contact:
Rinse with copious amounts of water - see physician
Skin Contact:
Wash with soap and water
Inhalation:
Remove to fresh air
Other First Aid:
None
SECTION 7 : Reactivity Data
Chemical Stability:
Presents no significant reactivity hazard.
Conditions to Avoid:
Avoid strong oxidizing agents.
Incompatibilities with Other Materials:
Avoid strong oxidizing agents.
Hazardous Polymerization:
None.
Hazardous Decomposition Products:
Burning liberates CO, CO2 and smoke. Does not undergo explosive decomposition,
is shock stable, and is not an oxygen donor. Does not form explosive mixtures with
organic materials.
SECTION 8 : Precautions For Safe Handling
Spill Cleanup Measures:
Eliminate all sources of ignition.
Small Spill:
Small spills can be flushed with water or soaked up with absorbent. Contain and
absorb by the use of sand, or inert power.
Handling:
Keep away from heat and flame. Keep container closed when not in use. Use with
adequate ventilation.
Storage:
Store in cool dry area protected from direct sunlight.
Waste Disposal:
Should be disposed of by a responsible contractor according to federal, state or
local ordinances, or incinerated in keeping with all Environmental Protection Agency
regulations.
DOT Hazard Class: Non-Combustible
SECTION 9 : Control Measures
Ventilation System:
Special ventilation facilities are not normally required for the handling of flavor
fragrance compounds provided that adequate air circulation is maintained within
the working area.
Skin Protection Description:
Prevent contaminated clothes. Wash affected area with water (or soap and water) if
irritation persists obtain medical advice.
Eye/Face Protection:
Irrigate copiously with water for at least ten minutes. Obtain medical advice.
Respiratory Protection:
No special procedures normally required. If excessive exposure produces adverse
affects remove the individual to fresh air and keep at rest. Obtain medical advice if
any symptoms persist.
Other Protective:
Measures should be taken to prevent contact with eyes and skin.
Exposure Limits:
Threshold limit value (TLV): None Established.
OSHA Permissible Exposure Limit (PEL): None Established.
SECTION 10 : Other Information
NFPA:
Fire Hazard: 0
Health: 0
Reactivity: 0
Specific Hazard:
MSDS Revision Date:
02/01/2002
MSDS Author:
D. Makarewicz
Disclaimer:
The information in this MSDS was obtained from current and reputable sources
However, the data is provided without any warranty express or implied regarding
its correctiveness or accuracy, it is the user's responsibility both to determine safe
conditions for use of this product and to assume liability for loss, injury, damage or
expense resulting from improper use of this product.
Chemical and Common Names: This material is a mixture.
5M
Copyright© 1996-2009 Actio Corporation. All Rights Reserved.