®
Facet Part Nos: Filter Assembly 1732030
Element 043046
Boeing Part No: Assembly D10-3202-2
.75 GPM Skydrol 500 Filter Assembly
1.87
Specifications
Rated Flow: .75 gpm
Fluid: Skydrol 500 A
Pressure Drop at Rated Flow: 1 psi at 100°F
Outlet
Degree of Filtration: 150 micron nominal
Operating Pressure: 500 psi
Burst pressure: 1250 psi
Temperature range: -65°F to +250°F
Housing Material: Aluminum alloy anodized
Element Material: Facet Poroloy® media 3.25
(stainless steel)
Weight: .5 lbs
Head
Inlet
Flow/Pressure Data
20
Element
Assembly Part No. 1732030
Fluid: Skydrol 500 at room temperature
15
Pressure Drop - PSI
10
8
6
5
4
3
2
Bowl
Inlet and Outlet Ports
per AND 10050-6
1.8
1
.1 .15 2 .3 .4 .5 .6 .8 1.0 1.5 2
3 4 5 6 8 10
Flow Rate - GPM
Purolator Facet Inc. · 8439 Triad Drive · Greensboro, NC 27409 · 800-852-4449 · 336-668-4444 · Fax: 336-668-4452
Facet Part Nos: Filter Assembly 1732030
Element 043046
Boeing Part No: Assembly D10-3202-2
.75 GPM Skydrol 500 Filter Assembly
Item No.
1
2
3
4
Part No.
568997
043043
573801
043046
1
No. per
Nomenclature
Assembly
Lockwire
1
Head
1
O-ring - Packing (NAS1611-216) 1
Poroloy® Element Assembly
1
6
4
Item No.
5
6
7
No. per
Nomenclature
Assembly
O-ring - Packing (NAS1611-012) 1
Bowl
1
Name Plate
1
Part No.
573812
034066
043077
5
3
7
2
Maintenance and Overhaul Instructions
Disassembly: Disassembly of the filter follows the sequence of the assigned item numbers in exploded view.
Cleaning: Wash metal parts in a suitable solvent such as trichloroethylene, carbon tetrachloride, stoddard solvent, etc. Place the filter element upright in a pan of solvent with the open end above the fluid level. After 15
minutes of soaking, lift out and rinse the outer surface with clean solvent. Do not brush or wipe element surfaces.
Do not allow dirty solvent to get inside of the element.
Other methods include vapor degreasing and steam cleaning. After visible soil has been removed, the element
should be placed in a fixture and reverse flushed (flow from inside to outside) under pressure with a series of
abrupt bursts of flow ending with a blast of clean air.
Inspection: Head and bowl and should be examined for distorted threads or scoring.
Replacement Items: Replace packing rings. Replace element if damaged. Replace defective head or bowl.
Lubrication: Before reassembly, lubricate packing rings with Skydrol 500. Lubricate threads on head and bowl
with lubricant conforming to Specification MIL-L-4343.
Reassembly: Reassemble in the reverse order of disassembly. Lubricate head and bowl threads and tighten 75 in. lbs.
Test: None
FPD 28.1 R8/96
©Copyright
Purolator Facet, Inc. - 2002- Printed in USA