TECHNICAL GUIDE
Meters
Water | Heat | Gas
pipecenter.co.uk
Meters
Contents
Metering has become a crucial part of energy monitoring and billing
for both commercial and domestic customers.
Introduction To Meters
02
“Jet” Ultrasonic Meters
04
“Jet” Multijet Meters
08
This has resulted in an increase in legislation such as the MID (Measuring Instrument Directive) standard,
product approvals and types. The JET range of meters encompasses these changes to offer high quality and
up to date solutions for every application.
The MID standard is an umbrella approval for all meters and is a requirement for all billing meters. The water
meters have the MID R80 standard and the heat meters have various MID approvals, including Class 2 for the
ultrasonic range which are ideal for RHI (Renewable Heat Initiative) applications. WRAS Approval up to 85°C
applies to the range of water meters further demonstrating the quality of the products.
The Heat Network (Metering and Billing) Regulations 2014 state that any heat supplier into a building that is
either a District Heating Scheme or Communal Heating where heat was provided as part of a service charge
must now all be metered for the end user and charged accordingly.
“Jet” Woltmann Meters
10
“Jet” Wall Mounted Meters
12
“Jet” Gas Meters
14
Part L of the building regulations also requires metering, so it is important to choose carefully and install the
appropriate products to ensure that the building is managed properly and in accordance with good practice.
There are numerous product communication options available, such as pulsed output, M-bus, wireless etc. to
suit all requirements, whether a one off or a large complex infrastructure.
There are many solutions to metering that we can offer, whether for water, heating, gas or industrial
processing with ultrasonic or magflow products.
02
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
03
Heat Meters
The JET range of ultrasonic MID Class 2 meters range from Dn15
to Dn100 (up to Dn200 available) and are available with either
pulsed, mbus or wireless output. These are ideal for long term,
durable applications which require a high degree of consistent
accuracy. There are no moving parts ensuring longevity in
addition to maintaining the highly accurate wide flow range
of 100:1 from minimum to maximum flow rates.
Both the ultrasonic flow sensor and the calculator are supplied
together as an integral unit, complete with temperature
sensors. The normal method of operation is by battery with
the option of mains power. These meters can be fitted vertically
or horizontally without compromising performance.
Renewable heat applications normally use heat meters. For
the Renewable Heat Initiative (RHI) the preferred type is the
MID Class 2 ultrasonic meters. The JET range of high quality
Class 2 ultrasonic meters are ideal for domestic, commercial
and RHI schemes.
The JET range of heat meters have all the necessary approvals.
These include MID (Measuring Instrument Directive) 2004/22/
EC, CEN EN 1434 (2007) and OIML R5 (2002). This also ensures
accuracy, durability and that legal billing standards are met.
A full range of interfaces are available to integrate the meters
into any design of heat metering application from a single source.
Ultrasonic Type (RHI Class 2 Standard)
Wolseley Code
Threaded
171741
171742
171743
171744
171745
-
-
-
-
Unions
N22009
N22010
N22011
N22011
N22013
n/a
n/a
n/a
n/a
Flanged
Dn Size (mm)
Union Tails
Flange Width C (mm)
-
-
-
-
-
171746
171747
171748
171749
DN15
DN20
DN25
DN32
DN40
DN50
DN65
DN80
DN100
1/2” BSP Male
3/4” BSP Male
1” BSP Male
1” BSP Male
1 1/2” BSP Male
-
-
-
-
-
-
-
-
-
165
185
200
235
Bolt Circle Centres D (mm)
-
-
-
-
-
125
145
160
190
Minimum flow l/hr
15
25
35
60
100
150
250
400
600
Nominal Flow m3/hr
1.5
2.5
3.5
6
10
15
25
40
60
Maximum Flow m3/hr
3
5
7
12
20
30
50
80
120
Temp range °C
90
90
90
90
130
130
130
130
130
Length L (mm)
110
130
130
150
150
200
300
300
360
Height H (mm)
50
61
61
61
102
62
118
120
128
Nominal Pressure (Bar)
16
16
16
16
16
25
25
25
25
Pulsed Output Value (kw/h per pulse)
1
1
1
10
10
10
10
100
100
3/4”
1”
1 1/4”
1 1/4”
2”
-
-
-
-
-
-
-
-
-
Pn25
Pn25
Pn25
Pn25
Connection Threaded “A”
Connection Flanged “C”
• MID Class 2 Approved
• Pulsed or M-bus versions available
• Wireless options available
• Battery or mains power versions available
• Fluid temperature measurement range 1-130°C (90°C up to Qp10 size)
• Large easy to read display
• Constant display of total energy used
• Horizontal or Vertical Mounting
• No loss of data when changing battery
• Connection of up to two additional meters possible
• All major components are recyclable
MID Approved
04
Flanged
Threaded
Sizes 50mm to 100mm Flanged version
Sizes 15mm to 40mm Threaded version
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
05
Heat Meters Packs
Heat Meters are generally used in applications such as central boiler services fitted to large buildings, or in District Heating
schemes. Submetering is also a common application.
Wall Mounted Heat Meter Packs
c/w Multijet water meter
Chilled water meters are typically used on air conditioning systems (note that temperature pockets are reversed for this application).
(Pack contains Multijet water meter, heat meter 10L, c/w 3m cabel PIPO, stainless steel pockets M10 x 85mm)
MID Approvals (Measuring Instrument Directive) enables manufacturers to obtain a single approvals certificate valid throughout
Europe EN1434-6:1997 standard for heat meters, installation, commissioning, operational monitoring and maintenance.
Chilled
Hot
Size mm
Qmin l/hr
Qt l/hr
Qn M3/hr
Qmax
M3/hr
Energy
kW/h
per pulse
600813
695457
15
30
120
1.5
3
10
600814
695458
20
50
200
2.5
5
10
600815
695459
25
70
280
3.5
7
10
Inline Heat Meter Packs
600816
695460
32
120
480
6
12
10
600817
695461
40
200
800
10
20
100
(Pack contains Inline heat meter and ball valve)
600818
695462
50
300
1050
15
30
100
600819
695463
50*
300
1200
15
30
100
All of our heating and chilled water meters include BMS pulsed output (MBUS is also an option)
Qt l/hr
Qn M3/hr
Qmax
M3/hr
Energy
kW/h
per pulse
2.5
6
0.6
1.2
1
3
15
1.5
3
1
5
25
2.5
5
1
Chilled
Hot
Size mm
Qmin l/hr
600810
695454
20
600811
695455
20
600812
695456
25
Suitable for larger flow rates greater than 2.5 M3/hr, includes flowmeter,
integrator and pockets
*PN16 flanged
Wall Mounted Heat Meter Packs
c/w Woltmann water meter
Suitable for small pipework applications up to a flow rate of 2.5 M3/hr
(appartments, underfloor heating, low flow applications)
(Pack contains Woltmann water meter, heat meter 100L, c/w 3m cabel PIPO, stainless steel pockets M10 x 85mm)
Chilled
Hot
Size mm
QnMin
M3/hr
Qt M3/hr
Qn M3/hr
Qmax
M3/hr
Energy
kW/h
per pulse
600820
695464
50
0.45
3
15
30
100
600821
695465
65
0.75
5
25
50
100
600822
695466
80
1.2
8
40
80
100
600823
695467
100
1.8
12
60
120
100
600824
695468
125
3
20
100
200
100
600825
695469
150
4.5
30
150
300
100
600826
695470
200
7.5
50
250
500
100
Suitable for larger flow rates greater than 2.5 M3/hr, includes flowmeter,
integrator and pockets
06
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
07
Water Meters
Accessories
MID R80 Approved
Remote reader (Indoor use only, battery operated)
One display unit per meter required
Red Meter
max. 90°C
Sizes 15mm to 50mm
Blue Meter
max. 30°C
Sizes 15mm to 50mm
D500 10L
Dn15 to Dn32 meters
D500 100L
Dn40 to Dn50 meters
Pulse converter
Converts a pulse signal from the meter to a modbus or mbus signal. Up to 5 pulsed inputs per module
Multijet - Class B type
DPMODBUS
5 inputs
Pulse to Modbus converter
DPMBUS
5 inputs
Pulse to Mbus converter
• MID R80 Approved
• Epoxy Powder Coated
Terms of Reference:
• For cold (30°C) or hot (90°C) water
• Real performances exceed MID standards
Size (mm) - Refers to inside bore diameter
• WRAS Approved up to 85°C
• Screwed BSP for Union Connection
Metrological Performance
• Pulsed Output Fitted As Standard
• Low flows Indicator Wheel
Q MAX (Q4) = Max Flow Rate (Q m3/h) - Refers to the emergency flow rate in the event of system failure. Damage may result
• Mbus or Modbus conversion option
QN (Q3) = Nominal Flow Rate (QN m3/h) - typical application for everyday useage
• Maximum working Pressure: 16 Bar
• Standard Horizontal Installation
(for vertical installation = 2x Trans Flow Rate)
• Dry Dial - Large & easy to read
• Security via tamper evident wire lock & seal
• All major components are recyclable
Q MIN (Q1) = Minimum Flow Rate (L/hr) - The absolute minimum flow rate required for the unit to function
• Brass Body
QT (Q2) = Transitional Flow Rate (L/hr) - Point of which the flow rate is high enough to achieve a level of accurate measurement
MID R80 Approved - Measures accurately at very low flow rates
Bolt Circle Centers - Refers to the distance between opposite bolt holes on the flange, taken centre to centre
Cold (Pulsed Output)
171253
171254
Cold (Non-Pulsed Output)
171243
171243
-
-
-
-
-
Hot (Pulsed Output)
171273
171274
171275
171276
171277
171278
171279
Unions
N22009
N22010
N22011
N22012
N22013
N22014
FLANGED
2 (DN50)
2 (DN50)
31.25
31.25
Dn Size (mm)
171255
1/2 (DN15)
3/4 (DN20)
1 (DN25)
Q Max (Q4) - Max Flow (m3/hr)
3.12
5
7.87
171256
171257
1-1/4 (DN32) 1-1/2 (DN40)
12.5
20
171258
QN (Q3) - Nominal Flow (m3/hr)
2.5
4
6.3
10
16
25
25
QT (Q2) - Trans Flow (l/h)
50
80
126
200
320
500
500
Q Min (Q1) - Flow (l/h)
32
50
78
125
200
312.5
300
Pulse (Litres Per Pulse)*
10
10
10
10
100
100
100
Body Length “L” (mm)
145
190
260
260
300
300
300
Body Length with Unions (mm)
230
280
370
375
420
435
n/a
Height “H” (mm)
105
106
115
115
148
173
165 (dia. Outer)
Width “W” (mm)
100
100
104
105
125
126
125 crs bolt
circle
Weight (kg)
1.5
1.7
2
3.2
5.4
8.2
11.5
-
-
-
-
-
-
4 x M16
Bolt Dia. (mm)
* Reed switch operates between 0-24 vdc
Figures apply to both hot & cold metres
171259
Pressure drops on all sizes generally below 0.2 bar
Current max 0.2 amps
All sizes are approximate and are given for guidance only.
Product and specification may be subject to change from those shown without notice.
08
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
09
Water Meters
Accessories
MID R80 Approved
Remote reader (Indoor use only, battery operated)
One display unit per meter required
Blue Meter
max. 30°C
Red Meter
max. 90°C
D500 100L
Dn50 to Dn125 meters
D500 1000L
Dn150 and upwards
Pulse converter
Converts a pulse signal from the meter to a modbus or mbus signal. Up to 5 pulsed inputs per module
Woltmann type
DPMODBUS
5 inputs
Pulse to Modbus converter
DPMBUS
5 inputs
Pulse to Mbus converter
• MID R80 Approved
• Flanged to EN1092-2 PN16 Connection
Terms of Reference:
• Cold (up to 30°C) and hot (up to 90°C)
• Supplied c/w Flange Gaskets
Size (mm) - Refers to inside bore diameter
• WRAS Approved up to 85°C
• Epoxy Powder Coated
Metrological Performance
• Pulsed Output Fitted As Standard
• Low flow Indicator Wheel
Q MAX (Q4) = Max Flow Rate (Q m3/h) - Refers to the emergency flow rate in the event of system failure. Damage may result
• Mbus or Modbus conversion option
QN (Q3) = Nominal Flow Rate (QN m3/h) - typical application for everyday useage
• Maximum working Pressure: 16 Bar
• Standard Horizontal Installation
(for vertical installation = 2x Trans Flow Rate)
• Dry Dial - Large & easy to read
• Security via tamper evident wire lock & seal
• All major components are recyclable
Q MIN (Q1) = Minimum Flow Rate (L/hr) - The absolute minimum flow rate required for the unit to function
• For cold (30°C) or hot (90°C) water
QT (Q2) = Transitional Flow Rate (L/hr) - Point of which the flow rate is high enough to achieve a level of accurate measurement
MID R80 Approved - Measures accurately at very low flow rates
Bolt Circle Centers - Refers to the distance between opposite bolt holes on the flange, taken centre to centre
Cold
171260
171261
171262
171263
171264
171265
Hot
171280
171281
171282
171283
171284
171285
171286
Flange Pack
T83149
T83150
T83151
T83152
T83153
T83154
T83155
2 (DN50)
2-1/2 (DN65)
3 (DN80)
4 (DN100)
5 (DN125)
6 (DN150)
8 (DN200)
Dn Size (mm)
Q Max (Q4) - Max Flow (m3/hr)
50
78
78.5
125
200
312
500
QN (Q3) - Nominal Flow (l/hr)
40
63
63
100
160
250
400
QT (Q2) - Trans Flow (m3/hr)
Q Min (Q1) - Flow (m3/hr)
3
5
8
12
20
30
50
0.45
0.78
0.79
1.25
2
3.12
5
Pulse (Litres Per Pulse)*
100
100
100
100
100
1000
1000
Body Length “L” (mm)
200
200
225
250
250
300
350
Height “H” (mm)
225
242
255
265
275
325
352
Diameter Outer (mm)
165
185
200
220
250
285
340
Bolt Circle Centres (mm)
125
145
160
180
210
240
295
Weight (kg)
16.3
17
18
22.8
28.3
46
59.6
4 x M16
4 x M16
8 x M16
8 x M16
8 x M16
8 x M20
12 x M20
Bolt Dia. (mm)
* Reed switch operates between 0-24 vdc
Figures apply to both hot & cold metres
171266
Current max 0.2 amps
Pressure drops on all sizes generally below 0.2 bar
All sizes are approximate and are given for guidance only.
Product and specification may be subject to change from
those shown without notice.
10
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
11
Inline Mounted
Compact Calculators
Wall Mounted Calculators
Features:
• MID Approved
• EEC Class C Approved (non RHI)
• Pulsed Output or Mbus versions (2 inputs available)
• Radio version option three versions 0.6 m3/hr or 1.5 m3/hr or 2.5 m2/hr
• Battery operated (6 year life)
• IP54 protection rating
• Vertical or horizontal mounting for installation in RETURN FLOW
Features:
• MID approved
• EMC C Class according to EN1434
• Pulsed Output or Mbus versions (PIPO or M-BUS)
• For use with mechanical, ultrasonic or magflow meters
• DN15-300 Applications
• Battery or 230v AC versions
• IP54 Protection Rating
• Fitted with 3M cable (2 wire) Option of 10 metre cables
• No dataloss when battery is removed
• Measurement Range 1 to 150°C
• Ambient Temperature 5 to 55°C
• Temperature Resolution 0.01°C
• Measuring Frequency 20 to 120 seconds
• Data storage Six times a day in non-volitile memory
• Application oriented display menu - easy scan
• 12 monthly values readable on the display
• PT500 sensors
• Installation in sensor pockets (3 sizes available)
Wall Mounted Calculator
171710
Cold Meter
171738
171739
171740
Hot Meter
171730
171731
171732
N22009
N22009
N22010
Union Tails
Unions
1/2” BSP male
1/2” BSP male
3/4” BSP male
Meter Ends
3/4” BSP parallel
3/4” BSP parallel
1” BSP parallel
Flow
0.6m3/hr
1.5m3/hr
2.5m3/hr
Size
20mm
20mm
25mm
PIPO
PIPO
PIPO
1 kw/hr
1 kw/hr
1 kw/hr
BMS Output Type
Output Valve (per pulse)
Ball Valve with Temperature Pocket
171712
171713
15-32mm
40-125mm
150mm
15-32mm
40-125mm
150mm
171736
3/4” BSP
BMS Output Type
PIPO
PIPO
PIPO
M-BUS
M-BUS
M-BUS
171736
3/4” BSP
Ball valve for 20mm in line heat meter (1.5m3/hr)
Pulse input value
10 L
100 L
1000 L
10 L
100 L
1000 L
171737
1” BSP
Ball valve for 25mm in line heat meter (2.5m3/hr)
100 kw/hr
100 kw/hr
1 mw/hr
100 kw/hr
100 kw/hr
1 mw/hr
0.1
0.1
1
0.1
0.1
1
Battery
Battery
Battery
Mains
Mains
Mains
Suitable Meter Sizes
Output value (per pulse)
Volume (M3 / pulse)
Power Source
171711
171714
171715
Ball valve for 20mm in line heat meter (0.6m3/hr)
One required with Inline Meter
Pulse converter
Ball Valve with Temperature Pocket
171736
Ball valve for 20mm in line heat meter (0.6m3/hr)
171736
Ball valve for 20mm in line heat meter (1.5m3/hr)
171737
Ball valve for 20mm in line heat meter (2.5m3/hr)
The meters as standard have either a pulsed or mbus output. To offer flexibility and compatibility with existing networks, a
converter may be used. Converts a pulse signal from the meter to a modbus or mbus signal. Up to 5 pulsed inputs per module.
DPMODBUS
5 inputs
Pulse to Modbus converter
DPMBUS
5 inputs
Pulse to Mbus converter
Two required with Inline Meter
Stainless Steel Pockets
171720
1/2” BSP x 85mm
171721
1/2” BSP x 120mm
171722
1/2” BSP x 210mm
Two required with Inline Meter
12
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
13
Gas Meters
Gas Meters
Description:
The JET range of precision gas meters covers all domestic and commercial
requirements, for both natural and LPG gas.
All meters have a pulsed output as standard.
Diaphragm Gas Meter (Pulsed)
Wolseley Code
Dn Size (mm)
Flow rating
Qmax (m3/hr)
Qn Nominal Flow (m3/hr)
Flanged Gas Turbine Meter
P05385
P05386
P05387
P05388
P05389
3/4” (DN20)
1” (DN20)
1-1/4” (DN32)
1-1/2” (DN40)
2” (DN50)
G4
G6
G10
G16
G25
6
10
16
25
40
Qn Nominal Flow (m3/hr)
10
10
Qmin- (m3/h)
1.5
1.5
Pule output value m3
0.1
0.1
4
6
10
16
25
Qmin- (m3/h)
0.04
0.06
0.1
0.16
0.25
Pule output value m3
0.01
0.01
0.01
0.1
0.1
Wolseley Code
P05390
P05391
P05392
P05393
P05394
P05395
P05396
P05397
P05398
3/4” (DN20)
1” (DN20)
1-1/4” (DN32)
1-1/2” (DN40)
2” (DN50)
3” (DN80)
4” (DN100)
6” (DN150)
8” (DN200)
Flow rating
n/a
n/a
n/a
n/a
G40
G160
G250
G650
G1600
Qmax (m3/hr)
30
30
30
30
65
250
400
1000
2500
10
10
30
112
200
500
1200
1.5
1.5
6
13
20
50
80
0.1
0.1
0.1
1
1
1
1
Dn Size (mm)
Width mm (D)
205
276
350
405
465
Length mm
170
170
170
170
100
120
150
180
600
Height mm (B)
228
282
311
375
375
Height mm
74
74
74
74
252
278
305
351
480
Depth mm (E)
160
202
202
275
275
Width mm
73
73
73
73
130
154
182
232
410
Weight kg
1.9
3.8
4.2
8
8.5
Weight kg
0.8
0.8
1
1
3.8
5.5
7.5
12
32
Pulse converter
Pulse converter
Converts a pulse signal from the meter to a modbus or mbus signal. Up to 5 pulsed inputs per module.
Converts a pulse signal from the meter to a modbus or mbus signal. Up to 5 pulsed inputs per module.
DPMODBUS
5 inputs any size gas meter
Pulse to Modbus converter
DPMODBUS
5 inputs any size gas meter
Pulse to Modbus converter
DPMBUS
5 inputs any size gas meter
Pulse to Mbus converter
DPMBUS
5 inputs any size gas meter
Pulse to Mbus converter
14
METERS - WATER | HEAT | GAS
METERS - WATER | HEAT | GAS
15
Branch Directory
Branch
Address
Postcode
Telephone
Barking
Unit 4, The Invicta Centre, Alfreds Way, Barking
IG11 0BA
0208 594 4010
Basildon
Paycocke Road, Basildon, Essex
SS14 3JS
01268 246 990
Brentford
Unit 7, Great West Trading Estate, 985 Great West Road, Brentford, Middlesex
TW8 9DN
0208 560 4605
Croydon
Unit 6, Beddington Cross, Beddington Lane, Croydon
CR0 4XH
0208 665 1003
Dunstable
Unit 23, Derby Road, Metropolitan Business Park, Greenford, Middlesex
UB6 8UJ
0208 578 2300
Kings Cross
Unit 30, Cedar Way, Elm Village Industrial Estate, Camden, London
N1C 4PD
0207 380 4230
Luton
Unit 8B, Cosgrove Way Industrial Estate, Luton, Bedfordshire
LU1 1XL
01582 404 162
Orpington
Unit 3, Denvale Trade Centre, Cray Avenue, Orpington, Kent
BR5 3RN
01689 827 200
Slough
838-840 Yeovil Road, Slough Trading Estate, Slough
SL1 4JG
01753 843 550
Strood
Unit 4, Deacon Trading Estate, Knight Road, Strood, Kent
ME2 2AU
01634 290 469
Tottenham
Unit 17, Mowlem Trading Estate, Leeside Road, Tottenham, London
N17 0QJ
0208 808 6633
Carlisle
Unit 4, Grearshill Road, Kingstown Industrial Estate, Carlisle
CA3 0ET
01228 819 647
Doncaster
Unit 4, Kirk Sandall Network Centre, Kirk Lane, Kirk Sandall, Doncaster
DN3 1GZ
01302 883 011
Hull
Leads Road, Hull, East Yorkshire
HU7 0BY
01482 838 880
Leeds
Gelderd Trading Estate, 7 West Vale, Leeds, West Yorkshire
LS12 6BD
0113 244 2161
Liverpool
Unit 10, Atlantic Way, Section 3, Demster Buildings, Brunswick Business Park, Liverpool
L3 4BE
0151 702 8700
Manchester
Textilose Road, Trafford Park, Manchester
M17 1WA
0161 872 8431
Newcastle
Unit 31, New York Way, New York Industrial Estate, Newcastle, North Tyneside
NE27 0QF
0191 296 1200
Sheffield
Unit 4, Tinsley Park Close, Off Shepcote Lane, Tinsley, Sheffield
S9 5DE
0114 242 4940
Stockton
20/25 Pennine Avenue, North Tees Industrial Estate, Stockton-on-Tees, Cleveland
TS18 2RJ
01642 671 904
Stoke
Sutton Street, Chesterton, Newcastle under Lyme
ST5 7JH
01782 564 908
York
Seafire Close, North York Trading Estate, York, North Yorkshire
YO30 4UU
01904 691 111
Birmingham - Aston
Units C&D, 4-6 Bracebridge Street, Dartmouth Industrial Estate, Birmingham
B6 4NE
0121 359 7091
Birmingham - West Bromwich
Unit B, Doranda Way, Doranda Way Industrial Park, West Bromwich
B71 4LE
0121 500 3700
Cambridge
Unit D, Beadle Trading Estate, Ditton Walk, Cambridge
CB5 8PD
01223 275 200
Derby
Dunstall Park Road, Off Ascot Drive, Derby
DE24 8HJ
01332 297 222
Ipswich
Unit 22, Foxtail Road, Ransomes Park, Ipswich
IP3 9RT
01473 270 072
Leicester
Unit 7, Highcliffe Road, Hamilton Industrial Park, Leicester
LE5 1TY
0116 276 3709
Northampton
Unit 2, Hartburn Close, Crow Lane Industrial Estate, Northampton
NN3 9UE
01604 410 888
Norwich
189-191 Aylsham Road, Norwich, Norfolk
NR3 2AD
01603 258 080
Nottingham
Unit 5, Centurian Way, Riverside Industrial Estate, Nottingham
NG2 1RW
0115 957 8200
Nottingham
Crossgate Drive, Queens Drive Industrial Estate, Nottingham, Nottinghamshire
NG2 1LW
0115 934 0500
Wolverhampton
34 Birmingham Road, Wolverhampton
WV2 3LT
01902 455 854
Bristol
Bonville Road, Brislington Trading Estate, Bristol, Avon
BS4 5SE
0117 977 0733
Cardiff
Unit 3 , Dominion Way Industrial Estate, Off Newport Road, Cardiff
CF24 1RF
02920 480 046
Exeter
Unit 3 Grace Units, Grace Road, Marsh Barton, Exeter
EX2 8QA
01392 491 777
Gloucester
Unit 8, Central Trading Estate, Cole Avenue, Gloucester
GL2 5HA
01452 393 870
Hereford
Unit 3, Three Elms Trading Estate, Three Elms Road, Hereford
HR4 9PU
01432 370 899
Oxford
Unit 35, Botley Works North, Hinksey Lane, Botley, Oxford
OX2 0LS
01865 200 599
Plymouth
Unit C, Plymouth Trade Park, Macadam Road, Cattedown, Plymouth, Devon
PL4 0RU
01752 226 955
Poole
23 Witney Road, Sabre Business Park, Nuffield Industrial Estate, Poole, Dorset
BH17 0GL
01202 666 748
Southampton
Quayside Road, Southampton
SO18 1AD
02380 635 633
Swansea
16a Mannesmann Close, Llansamlet, Enterprise Park, Swansea
SA7 9AH
01792 797 079
Swindon
Unit 9, Techno Trading Estate, Bramble Road, Swindon
SN2 8HB
01793 694 000
Aberdeen
Unit 1, Blackness Industrial Centre, Blackness Road, Altens, Aberdeen
AB12 3LH
01224 872 990
Belfast
Unit 12, 38 Montgomery Road, Belfast, N Ireland
BT6 9HN
02890 791 222
Dundee
Unit 6, George Buckman Drive, Camperdown Industrial Park, Dundee, Tayside
DD2 3SN
01382 816 427
Edinburgh
Unit 5, Bankhead Crossway North, Sightill Industrial Estate, Edinburgh
EH11 4BP
0131 442 4949
Glasgow
Unit 6, 31 Orton Place, Moorpark Industrial Estate, Govan, Glasgow
G51 2HF
0141 425 2700
Glasgow
100 Townsend Street, Port Dundas, Glasgow
G4 0LB
0141 331 7990
Inverness
Unit 2, Seafield Trading Estate, 51 Seafield Road, Inverness
IV1 1SG
01463 248 773
London & South East
North
Central
Wales & South West
Scotland & Northern Ireland
pipecenter.co.uk