P O L E S
20' TO 35' SQUARE STRAIGHT STEEL HINGED POLE
ANCHOR BASE
DRILLED PER FIXTURE REQUIREMENTS:
D1-DRILLED FOR 1 FIXTURE
D2-DRILLED FOR 2 FIXTURES AT 900 OR 1800
D3-DRILLED FOR 3 FIXTURES
D4-DRILLED FOR 4 FIXTURES
REMOVABLE CAP
POLE SHAFT
DRILLED MOUNT STYLES
TENON MOUNT STYLES:
T2-02.38 X 4.00 LG
T3-03.00 X 5.00 LG
T4-04.00 X 6.00 LG
.25
.25 THK. TENON PLATE
POLE SHAFT
TENON MOUNT STYLES
Shaft
The pole shaft’s two-section design is fabricated from U.S.
made coil stock. It is a weldable grade hot rolled commercial
quality carbon steel with a guaranteed minimum yield strength
of 46,000 psi after fabrication. Each section is a one-piece
construction with a full-length longitudinal resistance weld and
is uniformly square in cross section.
BaSe
The anchor base is fabricated from structural quality hot rolled
carbon steel plate, having a guaranteed minimum yield
strength of 36,000 psi. The base plate telescopes the pole
shaft and is circumferentially welded top and bottom.
A full base plate cover is supplied. The cover is made of
automotive structural grade ABS plastic with UV inhibitor to
eliminate color fading. It is rust proof and tamper resistant.
Winch
A portable, lowering winch is required with hinged poles and
should be ordered as a separate item.
handholeS
An extruded handhole to facilitate ease of wiring is standard.
A cover with attachment hardware is provided.
*Winch priced separately.
anchor BoltS
Anchor bolts are fabricated from structural quality hot rolled
carbon steel bar, having a minimum yield strength of 50,000
psi. Bolts have an “L” bend on the end. The threads plus 3
inches are galvanized. Anchor bolts come with two nuts and
washers.
finiSh
Standard finish is dark bronze powdercoat. Also available as
standard in powder coat is black. Optional powder coat finishes include grey, silver, and white. A galvanized finish is also
available as an option. All powder-coated poles are shipped
wrapped. Galvanized poles are shipped unwrapped. With custom colors applied in the field, poles are shipped unwrapped.
3.50
5.50
3.50 X 5.50 HAND HOLE COVER
Lighting Products,Inc. 150 Pemco Way-Wilmington, DE 19804 Phone 302.892.9000 Fax 302.892.9005 www.pemcolighting.com [email protected] EE-11(2017)
P O L E S
20' TO 35' SQUARE STRAIGHT STEEL HINGED POLE
ANCHOR BASE
Or d Er In G
C h ArT
alloWaBle Size of luminaireS*
POLES
MODEL
NUMBER
420-SSS-H/7-11
520-SSS-H/7-11
EFFECTIVE PROJECTED AREA-SQ FT-AT:
70
80
90
100
120
MPH
MPH
MPH
MPH
MPH
MOUNT
HEIGHT
20'
20'
424-SSS-H/7-11
624-SSS-H/7-7
430-SSS-H/7-11
630-SSS-H/7-7
Model Number
10.8
19.3
9.3
15.2
6.9
9.4
–
–
4.5
19.0
3.5
14.0
2.9
10.8
1.9
6.4
–
35'
–
Or d Er In G
420-SSS-H/7-11
13.5
24.4
24'
24'
30'
30'
635-SSS-H/7-7
–
–
9.5
25.2
12.1
7.7
18.6
7.0
6.1
14.3
3.6
3.8
8.6
–
SHAFT
SIZE x WALL
BUTT
TOP
4" x 11
5" x 11
4" x 7
6" x 7
4" x 11
6" x 7
4" x 7
6" x 7
6" x 7
ExAMPL E
4" x 7
Shaft
Size
20'
Mount
Height
Square Straight Steel Hinged
Pole
Type
25"
dimenSionS of StandardS
4" x 7
5" x 7
7
Shaft
Gauge
3/4"
32"1/4”
BOLT
CIRCLE
BOLT
SIZE
9 1/2"
11"
3/4" x 28"
1" x 40"
9 1/2"
11 1/2"
3/4" x 28"
1" x 40"
4" x 11
6" x 7
9 1/2"
11 1/2"
6" x 7
11 1/2"
3"
BASE
PLATE
10" x 10" x 3/4"
11" x 11" x 1"
3/4" x 28"
1" x 40"
10" x 10" x 3/4"
12" x 12" x 1"
10" x 10" x 3/4"
12" x 12" x 1"
1" x 40"
12" x 12" x 1"
This example illustrates the standard ordering sequence.
Select each part of the ordering number from the
Ordering Chart above.
*EPA calculations allow for 1.3 Gust Factor.
Variations from standard sizes listed above, available upon inquiry at the factory.
Satisfactory performance of lighting standards is dependent upon the standard being properly attached to a supporting foundation of adequate design. PEMCO does not design or offer recommendations for foundations.
Pemco liGhtinG ProductS, inc. offerS the PrecedinG information aS a Guide onlY, and aSSumeS no liaBilitY for itS uSe.
do not uSe thiS chart aS a Guide for anchor Bolt inStallation; reQueSt a BaSe temPlate Before PourinG concrete!
POLE DIMENSIONS AT BASE
ANCHOR BOLTS
POLE BOLT CIRCLE
BASE
+ SQUARE THK DIA x LENGTH x HOOK PROJECTION +
SQUARE DIA
(IN) (IN)
(IN)
(IN)
(IN)
(IN)
(IN)
(IN)
4.00
6.41
7.13
7.18
9.25
12.50
13.50
13.50
0.75
N/A
N/A
N/A
9.75
11.88
12.63
12.63
0.750
0.875
1.250
0.875
0.75 x 17.00 x 3.00
1.00 x 36.00 x 4.00
1.00 x 36.00 x 4.00
1.00 x 36.00 x 4.00
3.50
4.13
4.50
4.13
0.25
0.25
0.25
0.25
Anchor Base Detail
180°
Bolt Slots/Holes
Bolt Circle
90°
As viewed
from top
of pole.
270°
0° - Handhole
EE-12(2017)
Lighting Products,Inc. 150 Pemco Way-Wilmington, DE 19804 Phone 302.892.9000 Fax 302.892.9005 www.pemcolighting.com [email protected]