www.acmoore.com
ArtSkills It's Electric Poster
by ArtSkills Design Team
PROJECT DETAILS
Level :
BEGINNER
Time :
2 HOURS
Project Supplies
Large Corrugate Tri-fold Display Board with Header
ArtSkills Classic Quick 2-1/2 inch Letter Pads 104743811
ArtSkills Poster Lights 104743826
ArtSkills Poster Sound Recorder 104743848
ArtSkills Vinyl Letters 1 and 2 inch 214 pc. 104743822
ArtSkills Eye Catchers Neon 104743824
ArtSkills Pre-Cut Poster Board Shapes Small 104743863
ArtSkills Poster Flash 104743846 Nicole™ Crafts School Brush Set 5 pc. 104120042
Aleene's 4 oz. Original Tacky Glue 104148018
Printed Pictures/Images that Relate to Your Science Fair or School Project Topic
Printed Information Relating to Your Science Fair or School Project Topic
Nicole™ Crafts Construction Paper 9 inch x 12 inch 50 pc. Assorted 104127567 (for mounting pictures and
information)
ArtSkills Rainbow Glitter Glue 104743832
Need something for this year's science fair? With Eye Catchers, Poster Flash and other cool supplies, the ArtSkills
It's Electric Poster is sure to please!
Step 1
1/2
www.acmoore.com
Add the title to the header using Yellow classic quick letters to center IT’S ELECTRIC on the header. Then layer
random color quick letters on top of the Yellow letters. Position the letters slightly up and to the left to create a drop
shadow effect. Glue the random color letters to the Yellow letters. Punch holes in the individual letters where you
want the poster lights to shine through. Lay out the title on the header again and once you are happy with the
layout, glue the letters down.
Step 2
Attach the poster lights following the directions in the package and then you can set this aside.
Step 3
Select the pre-printed science fair headers from the package of vinyl letters. Mount these headers on colored paper
and lay them out on the tri-fold.
Step 4
Mount your pictures, images and/or information on colored paper and lay them out on the tri-fold board.
Step 5
Select the Pink pre-cut burst shape from the pre-cut poster board shapes and add vinyl letters to spell out HIGH
VOLTAGE. Use a craft brush to add craft glue within the edge of the burst and then sprinkle with gold glitter
shakers. When this is dry, lay it on the right side of the tri-fold board.
Step 6
Record an important fact or question about your topic on the Poster Sound Recorder and position it on the left side
of the tri-fold.
Step 7
Add holographic eye catchers to fill in open spaces.
Step 8
Add some poster flash to the eye catchers.
Step 9
Now if you are happy with your tri-fold layout, you can glue/attach everything down.
Step 10
Use the craft brush and craft glue to add “electric volts” and sprinkle with Gold glitter from the Rainbow pack.
2/2
Powered by TCPDF (www.tcpdf.org)