Gigacom FibreCore Airblown MicroCable FT

Gigacom FibreCore
Airblown MicroCable FT-S12
Structure
24fiber
48fiber
144fiber
192fiber
1. Optical Fiber
4. Water Blocking Kevlar/ Twaron Yarn
7. FRP
2. Jelly
5. Ripcord
8. Water blocking yarn
Description
Fiber type:
216fiber
96fiber
288fiber
3. Loose Tube
6. PE Lining
9. HDPE Sheath
Feature
250um single-mode fiber
Outside sheath: HDPE
Strength member :Glass fiber reinforced plastic
Tube Stranding: SZ wounded
Loose Tube:
72fiber
(PBT)Polybutylene- Terephthalate
Water tightness:Water blocking Kevlar/ yarns
HF FiberCore Air Blown Fiber Cables are
lightweight cables designed for air blown
installation into Micro-Ducts.
Strong loose tubes provide easy and
stable working and installation
performance.
The Dry Core Design keeps fiber cable in
small diameter and fully water resistance
for quick and clean jointing.
Special construction is designed for air
jetting, allows the cable to be blown in
both small and standard ducts for extreme
long distance
www.gigacom.se | Säterigatan 23, Göteborg, 031-55 59 70 | Vetenskapsvägen 10, Sollentuna, 08-626 69 90
1/3
Rev:18. september 2015
Gigacom FibreCore
Airblown MicroCable FT-S12
Color Code (Gigacom S12)
Fiber color code
No.
1
Red
2
3
4
5
6
7
Blue White Green Yellow Grey Brown
8
Black
9
10
11
Violet Orange Turquoise
12
Pink
Other color codes can be ordered by prior notice
Loose tube color code
No.
1
2
3
4
5
Red
Blue
White
Green
Yellow
6
7
8
9
10
11
Grey Brown Black Violet Orange Turquoise
12
Pink
13
14
Test Protocol
Mechanical Test:
Test
Standard
Parameters
Installation Tension
IEC 60794-1-2-E1
1.5x Weight
Short Term Crush
IEC 60794-1-2-E3
Criteria
Fiber strain ≤ 0.33%,additional attenuation:
≤
min
0.1dB after test
Additional attenuation: ≤0.1dB after test
No damage to outer jacket and inner elements
1000 N , 100mm ,
5
Repeated bending
IEC 60794-1-2-E6
25 N, 25 cycles
No obvious additional attenuation. No damage
Torsion
IEC 60794-1-2-E7
40 N, 5 cycles
∆a ≤0.05dB, no damage
Coiling
Coil
on
standard
IEC 60794-1-2-E20
Drum
performance
Remark: Tests according to IEC 60794 Edition 1.0, 2008-10
The outer sheath has no visible crack. No
damage on the cable
All optical tests proceeded at 1550 nm
Environmental Test:
Test
Standard
Parameters
Criteria
Temperature cycling
IEC 60794-1-2-F1
SingleMode
Storage, installation and Operation
Water column =1 m,
No water leak through the open end
in 24 hours
Water penetration
IEC 60794-1-2-F5
Sample cable = 3 m
Filling compound flow
IEC 60794-1-2-E14
No compound flow from the cable in
24 hours
70°C
Remark: Tests according to IEC 60794 Edition 1.0, 2008-10
All optical tests proceeded at 1550 nm
Air Jetting Test:
Test equipment
Fiber
count
Standard duct
Test field
Typical blowing length
10/8 mm
Square: 4X100 m
≥ 1500 m
PR-140/ MiniJet
24-96
PR-140/ MiniJet
144-216
12/10 mm
Square: 4X100 m
≥ 1500 m
PR-140/ MiniJet
288
20/16 mm
Square: 4X100 m
≥ 1500 m
www.gigacom.se | Säterigatan 23, Göteborg, 031-55 59 70 | Vetenskapsvägen 10, Sollentuna, 08-626 69 90
2/3
Rev:18. september 2015
15
Orange Turquoise Pink
Gigacom FibreCore
Airblown MicroCable FT-S12
Technical Index
Cable construction:
Fiber count
24-72
96
144
192
216
Construction
(Fiber x Tube)
12x X
12x 8
12 x 12
12 x 16
12 x 18
Nominal diameter
(mm)
5.6
6.4
7.9
7.9
7.9
Weight
(KG/Km)
27
40
62
57
60
288
12 x 24
9.4
80
Nominal
Outer sheath thickness
Loose tube bending
radius
0.5 mm
25 mm
Min. Bending radius
Static:
12 X OD
Dynamic: 20 X OD
Temperature range
Storage:
-40 - +70 °C
Installation: -10 - +50 °C
Operation: -30 - +70 °C
Ordering Information
Standard drum size:
4km/6Km
Printing on the cable: “Gigacom FiberCore” “part number” “meter” “production date and code”
Part number:
A24 G652D 12x2 FT- S12 A12 G657A1 12x1 FT-S12
A48 G652D 12x4 FT- S12 A48 G657A1 12x4 FT- S12
A72 G652D 12X6 FT- S12 A72 G657A1 12X6 FT- S12
A96 G652D 12X8 FT- S12 A96 G657A1 12X8 FT- S12
A144 G652D 12X12 FT- S12 A144 G657A1 12X12 FT- S12
A192 G652D 12X16 FT- S12 A192 G657A1 12X16 FT- S12
A216 G652D 12x18 FT- S12 A216 G657A1 12x18 FT- S12
A288 G652D 12X24 FT- S12 A288 G657A1 12X24 FT- S12
www.gigacom.se | Säterigatan 23, Göteborg, 031-55 59 70 | Sjöängsvägen 5, Sollentuna, 08-626 69 90
3/3
Rev:18. september 2015