Product Description
Partito Screen
CONTENTS
1. Product Overview
2. Product Components
3. Modular and functional structure
4. Materials
5. Environment
6. Product ergonomics
7. Safety
Page 1 of 15
1. PRODUCT OVERVIEW
Page 2 of 15
2. PRODUCT COMPONENTS
3 VARIATIONS
HEIGHT ADJUSTABLE:
990
790
990 - 1500
790 - 1300
Height-adjustable variations are mounted behind the desk. Two
heights are available: 790mm, 990mm.
720
1200
1100
463
363
DESK-MOUNTED:
Partito Screen’s rear edge lies flush with the rear edge of the
desk. Partito Screen shortens the useful work surface depth by
35mm. Two heights are available: 363mm, 463mm.
BACK-TO-BACK CONFIGURATION:
Back-to-back variations are mounted on the desk. Partito
Screen is centred between two desks in back-to-back
configuration. Partito Screen shortens useful work surface
depth by 17.5mm. Two heights are available: 363mm, 463mm.
Page 3 of 15
463
363
720
1200
1100
PARTITO SCREEN & DESK
HEIGHT ADJUSTABLE:
For height-adjustable variations, screens are installed across
the width of the desk’s rear edge. Two adapters per screen are
required for this purpose. A cut-out at the desk’s rear edge is
not required.
A connector set is required to connect two screens.
Example:
Partito Screen height adjustable
Example:
2x Partito Screens height adjustable (left + right)
Page 4 of 15
DESK-MOUNTED:
For desk-mounted variations, individual screens are installed
across the width of the desk’s rear edge. For this purpose, two
adapters per screen and two cut-outs on the rear edge of the
desk are required.
Example:
Desk-mounted Partito Screen
Desk-mounted Partito Screen basic screen (left/right)
A compensating device and connector set are required for
connecting two screens.
It is advisable to use two extension screens. Each of them
requires an adapter, a leg and a cut-out on the rear edge.
Example:
Desk-mounted Partito Screen extension screen (left+right)
Page 5 of 15
BACK-TO-BACK CONFIGURATION:
For back-to-back variations, individual screens are installed
across the width of the desk’s rear edge. Two adapters per
screen and two cut-outs per rear edge are required.
Example:
Partito Screen for back-to-back configuration:
Example:
Partito Screen for back-to-back configuration basic screen
(left/right)
A compensating device and connector set are required for
connecting two screens.
It is advisable to use two extension screens. Each of them
requires an adapter, a leg and a cut-out on the rear edge.
Example:
Partito Screen for back-to-back configuration extension screen
(left/right)
Page 6 of 15
3. MODULAR AND FUNCTONAL STRUCTURE
FRAME AND PANELS
FRAME 35MM THICK:
Connected with die-cast zinc corners, 35mm thick continuous
aluminium profiles can be fitted with the following panels:
Panel, 8mm thick
Page 7 of 15
Panel, 35mm thick
Panel with acoustic, 35mm thick (class C)
Upholstered panels and Orga-Panel (optional) are clamped into
the frame. Desk adapters and connector sets are also
connected via the frame (screen to screen).
PANELLING
The panelling built into the frame is available in 2 thicknesses:
– 8mm
– 35mm, flush with aluminium screen
Panelling is available in the following materials:
– Melamine, particle board with melamine finish, 8mm thick
– Wood veneer, particle board with veneered finish, 8mm thick
– Acrylic double-web, 8mm thick
– Fabric-covered particle board, 8mm or 35mm thick
Page 8 of 15
– Fabric, non-woven PE material, upholstered, 35mm thick
For standard built-in Orga-Panel, the lower and upper panelling
comes in the same material. Upper panelling is optionally
available in acrylic double-web.
not H363
ORGA-PANEL
As an option, panelling can be additionally fitted with an OrgaPanel. This is designed to support trays and pencil boxes, etc.
The Orga-Panel is available in two variations:
– 1-rail
– 5-rail
405
The Orga-Panel can be fitted in two positions. Dimensions
depend on the variation:
– height adjustable above, or 405mm from lower edge of Partito
Screen to lower edge of Orga-Panel
Page 9 of 15
182
– Desk-mounted above, or 182mm from lower edge of Partito
Screen to lower edge of Orga-Panel (not for H = 363)
not H363
182
– Back-to-back above, or 182mm from lower edge of Partito
Screen to lower edge of Orga-Panel (not for H = 363)
not H363
The 1-rail Orga-Panel should only be used for light accessories
from the 1+1 range.
The 5-rail Orga-Panel is suitable for supporting a monitor arm.
Max. load: 10kg per side, 20kg in total.
CONNECTORS
If two Partito Screens are assembled right next to each other –
e.g. both rear edges of corner desks – then they must be
connected.
Connectors consist of a special aluminium tube which is
fastened to the frame by means of a clamping block.
Page 10 of 15
DESK VERSATILITY:
RANGE-SPECIFIC ADAPTERS:
Specific adapters are used to combine Partito Screen with
various desk ranges:
– Activa
– FrameOne
– FrameOne Bench
– Kalidro
– Quba II
– Tenaro
– Vitesse II
C-CLAMP AS UNIVERSAL ADAPTER
Partito Screen can be directly connected to the desktop by
using a C-clamp as a universal adapter.
The following dimensions are required:
– Width 63mm
– Rear edge thickness 6mm
– Clamp depth below desktop 25mm
– Height below desktop 26mm
When a C-clamp is used, Partito Screen can be only used in
back-to-back configuration.
Page 11 of 15
ACCESSORIES
STACKABLE SCREEN
For a little additional privacy, a white Plexiglass screen can be
mounted to the upper frame profile.
The screen is available in 3 different widths (650mm, 850mm,
1050mm), with a height of 165mm and a thickness of 6mm.
Two aluminium clamps are used to connect it to Partito Screen.
RETURN SCREEN
For a little lateral privacy, a white Plexiglass panel can be
mounted to the frame profile.
The panel comes in two different heights (363mm, 463mm), 5
different widths (600mm, 700mm, 800mm, 900mm, 1000mm)
and is 6mm thick. Two aluminium clamps are used to connect it
to Partito Screen.
SHELVES
19mm-thick shelves are available in melamine or wood veneer.
14-mm thick shelves are available in TechTop.
Lateral sheet steel shelf brackets measuring 120mm in height
can be used as bookends.
An aluminium profile is built into the rear of the shelf, and can
also support bookends.
Max. shelf load capacity: 1.4 kg/10cm. Also check max. load
capacity of the respective desk range!
Attention:
• Max. load 1.4kg/10cm width
• Max. load 28 kg
• Max. 1 shelf per side
Page 12 of 15
4. MATERIAL
MATERIAL, COATING AND COLOURS
Frame profile
Die cast corners
Desk adapters
Orga-Panel
Panelling
Melamine
Wood veneer
Acrylic
Fabric 8mm
Fabric 35mm
Material
Coating, colours
Aluminium
Die cast aluminium
Anodised
Varnished, silver
Die cast aluminium
Sheet steel
Varnished, silver
Powder-coated, see price list
for available colours
Anodised
Aluminium
3-layer fine particle board
(DIN 68765-H1, grade E1)
3-layer fine particle board
(DIN 68765-H1, grade E1)
Acrylic double-web
3-layer fine particle board
0.8cm
Two 3-layer fine particle
board 0.8 cm
Melamine resin coated, see
price list for available colours
Veneer coated with UVhardening water enamel, see
price list for available colours
Clear, translucent
see price list for available
colours and fabrics
see price list for available
colours and fabrics
5. ENVIRONMENT
RECYCLING
Fabric and panelling are disposed of thermally.
Other materials (steel, plastic and aluminium) are recycled.
6. PRODUCT ERGONOMICS
Partito Screen offers visual privacy and supports organisation.
Part of the organisational function lies on a vertical axis (“from
desktop to wall”), thereby reducing required surface area per
workstation.
Thanks to its sleek and modern design, Partito Screen can
basically be combined with all desk ranges.
Page 13 of 15
• Visual privacy: The degree of privacy can be customised
thanks to the range of available heights.
• Design: Shape and materials offer a contemporary and
neutral look, enabling Partito Screen to be used in all
environments.
• Organisation: 1-rail or 5-rail Orga-Panels are designed to
support trays and pencil boxes, etc. Not only do they
support workspace tidiness but also contribute to surface
efficiency.
• Acoustic: Partito Screen’s sound-absorbent properties –
(class-C) contribute to better room acoustics. Room
acoustics have a direct effect on concentration and thus on
staff performance potential.
• Variations: The height-adjustable variation is designed to
support a consistent line on the top edge of Partito Screen,
tailored to the user’s respective height.
Desk-mounted and back-to-back variations support
optimal posture and optimal appearance to suit all needs.
7. SAFETY
CERTIFICATES
Steelcase Werndl AG applies Total Quality
Management to its production processes and has
had DIN ISO 9001 accreditation since 1995. This
ensures that our products are of consistently high
quality.
Page 14 of 15
Steelcase Werndl AG bears the Eco-Audit seal
for EC environment management and sustainable
development.
‘GS-Zeichen’ (Geprüfte Sicherheit –Tested
Safety) The entire range has been awarded the
‘GS-Zeichen’ (Geprüfte Sicherheit -Tested Safety)
by TÜV Bayern. This applies to all desks, corner
elements, attachments and accessories.
Steelcase provides an 8 year - international
manufacturer guarantee on its products.
Page 15 of 15