Paysonstone - Sand
Sku - 907470
With it’s beautiful natural-sandstone appearance, this
pre-cast concrete stepping stone is a puzzle piece with
endless expansion giving a completely random natural
sandstone appearance. It also has many uses around
your home as
stepping stoanes, patios, pathways,
grass-to-garden borders, lawn accents, and more.
• Random looking puzzle shape for endless size designs and
layouts
• Textured surface and natural shapes and styles create the
look and feel of sandstone
• Can be dry set or set with mortar
• Each stone covers approximately 1 square foot.
PAT I O S TO N E I N S TA L L AT I O N
Step 1 - Measure your area Width x Length = Total Square Footage.
Step 2 - Excavate your area 2 inches deep plus the thickness of the Stepping
Stones. (Remove all rock and debris)
Step 3 - Using (2) ¾ inch x 5-foot metal conduit pipes will give you a 1-inch
outside diameter. Lay the conduit pipes parallel to each other, fill area with Paver
Base and drag a 2 x 4 board perpendicular over the metal conduit to level the
Paver Base even with the thickness of the conduit pipes. Move the conduit pipes
along as you go. Remove the conduit pipes and fill their void by hand.
Step 4 – Using a square metal tamp, pack down the Paver Base.
(Option: Lay down weed cloth on top of the Paver Base over area)
Step 5 – Using (2) ¾ inch metal conduit pipes will give you a 1inch outside
diameter. Lay the conduit pipe parallel to each other, fill area with Leveling Sand
and drag a 2 x 4 board perpendicular over the metal conduit to level the Leveling
Sand even with the thickness of the conduit pipes. Remove the conduit pipe and
fill their void by hand. (Do not pack down Leveling Sand)
Step 6 – Gently lay down Stepping Stones flat. Using a rubber mallet, set and
level the Stepping Stones. Continue until all pieces are laid. Recommended to
space between 2-inches and 12-inches between stones.
Step 7 – Use a push broom to sweep Leveling Sand into the joints and remove
excess sand from the Stepping Stones.