PIPE RAIL TROLLEY 150CM
The pipe rail trolley 150cm is a standard in the
'cultivation under glass' industry. From the introduction
of the pipe rail system in greenhouses, one is hard put to
imagine a greenhouse without a pipe rail trolley. It has
now become a standard system in today’s modern
horticultural industry.
numerous mechanical and electrical improvements. Three
key models currently on the market are: the standard pipe
rail trolleys BR04 and BR08 and the pipe rail spray trolley
combined with surface mounted reel.
Standard pipe rail trolley 150cm
The standard BR04 trolley is 150cm in length and comprises
two work levels, namely 20cm and 50 cm.
The difference between the BR04 and the BR08 is the 1-0-2
switch on the control cabinet. The control cabinet is height
adjustable between 195cm and 250cm, facilitating the
addition of hydraulic or manual scissors. Operating the
trolley is a safe and simple procedure. The speed can be set
between 0 and 40 meters per minute and is regulated by a
quality electronic potentiometer. Switching of the break/gas
function is by a tumbler switch situated at the accumulator
tank. The 24V/100ah transaction battery provides the trolley
with the requisite power for an extended period. A manual
lever on the trolley allows for side to side or motion. The
four push-up wheels facilitate ease of movement between
various paths.
The pipe rail system stands as one of the horticulture industry’s
great inventions of the last quarter of the century. By employing
such a system, in conjunction with the trolleys that glide over
the pipes, workload has decreased considerably and rendered
a more pleasurable experience. All current models of today’s
pipe rail trolley comprise this basic concept.
Standard BR04
Standard BR08
The BR08 distinguishes itself from the BR04 in its control
cabinet and the electronics of the motor actuator. This
particular trolley is instantly recognisable by its control
cabinet equipped with stainless control buttons and a large
red emergency button.
All function keys are located on the display, including the
switch from gas to brake pedal. The display will produce a
sound and signal serving as a warning to recharge batteries,
consequently considerably extending battery lifespan. The
electronic motor control regulates a linear speed, ensuring
sufficient power in low speed operations therefore driving,
effortlessly over pipe rail surfaces.
Spray trolley
In the last two decades, the standard pipe rail trolley has more
than proved its worth with a number of 20-year-old trolleys still
in operation! Ostensibly over this time the trolley has witnessed
Externally, this trolley is identical to previously mentioned
models. The spray trolley, however, comes equipped with a
fortified motor, namely 0.37 kW. You may select the BR04
or the BR08 control.
INNOVATORS IN MOTION
Pipe rail trolley applications:
-
Product transportation
Crop nursing
Harvesting
Spraying using spray trolley
Advantages of pipe rail trolley:
-
Improved labour conditions
Labour saving
Ease of operation
Smooth side-to-side motion
Extended lifespan
Attachable to transportation trolleys
Also available with pneumatic tyres option
Alternative sizing available on request
Technical specifications:
-
Length: 150cm
Width: 52cm
Minimum platform height: 20cm
Maximum operating level possible until 230cm
Pipe rail system: 42cm (centre to centre), pipe: 51mm
Traction batteries: 24V/110Ah
Motor capacity: 0.18kW
Motor capacity spray trolley: 0.37Kw
Speed spray trolley: 0-70 mtr/min
Control cabinet height: variable between 195 and 250 cm
We advise the BR08 – boasting the most contemporary
electronic steering control available on the market. In
addition, the BR08 already enjoys the necessary motor
controls for surface-mounted reel regulation. The Berg
Product trolleys are supplied with interchangeable
electronics, preventing potential time loss during spraying
activities.
Various options are available for all pipe rail trolleys to
increase operation level e.g. single manual scissors to a
height of 160cm or even a double scissors to a 230 cm
height. The hydraulic scissors platforms reach to a 195 cm
height of 195cm. If insufficient, we can mount various fixed
steps increasing the height to an approximate maximum of
50 cm.
WWW.BERGHORTIMOTIVE.NL