TECHNICAL DATA SHEET HOrIzONTAL rOPE LIfE LINE TDS115 HLL125 Webbing Horizontal Temporary Life Line Technical Data Sheet CHECKMATE 16mm Rope Temporary................ HorizontalLifeLine .................. HLL125 is a temporary life line designed to be used for restraint or fall arrest applications. Spanning up to 25m the system can accommodate 4 users at a maximum combined weight of 400kg Note - System length is measured between the bearing points of the anchor points, if using anchor strops ensure they do not extend the length of the system outside of its scope of use. TDS115 HLLRopeGrab....................... Checkmate’s automatic 16mm rope grab with tensioner. SwivelEye............................... Captive swivel eye will prevent the rope twisting during use. SewnTerminations............. Stitched with contrast thread for easy inspection. 16mmDoubleBraid.................. Kernmantle Rope.................. Offers strength and durability utilising a protective outer ‘mantle’. Pulley............................. Use of a pulley can reduce frictional wear on the rope. Tensioner......................... The new and improved rope vice tensioner can apply tension to the lifeline by simply depressing and rotating the tensioning handle. ISSUE 07 orderinginformation PartNo. HLL125 Description 25 metre 16mm rope Temporary Life Line Weight 8.2kg The information on this data sheet is for marketing purposes only and Checkmate reserves the right to amend at any time without notice. The information must not be relied on for use, which must be obtained from the product marking and user information. HLL125 rope Horizontal Temporary Life Line Technical Data Sheet CamRopeAnchorEye (SS) Tension ReleaseArm (Al) SecuringPin (SS) Side Plates TensionHandle (SS) SecurityNut (SS) TDS115 productfeatures principalmaterials Inline swivel to prevent rope twist range of connectors to suit Contrast colour stitching for easy inspection Max length 25m Max number of users is 4 in restraint or fall arrest and a maximum combined weight of 400kg Minimum anchor strength 15kN (single user) Maximum imposed forces on anchors 15kN Maximum system tension 2kN (Never over tighten) SS=StainlessSteel Al=Aluminium Washers&Bearings Delrin SidePlates Anodised Aluminium Rope 16mm double braid kernmantle rope Swivel Aluminium standards EN 795 Class C ISSUE 07 CHECKUSOUT w w w . ch e ck mate u k . com Using fall arrest equipment is only a part of working safely at heights; get accredited height safety training from HArT. for more information visit www.h-a-r-t.co.uk
© Copyright 2026 Paperzz