WESTERN Construction Components Inc. RECTANGULAR Rectangular Body Dump Bodies from 10' to 18' Lengths Tub Thickness up to 1/2" AR400 ELIPTICAL Elliptical Body Our Elliptical style is the ultimate example of a premium quality rock tub needed in todays construction industry. BATHTUB Bathtub Body Dump Bodies for All Applications See For Yourself The Western Construction Components Rock Tub is designed to give years of trouble-free service under the worst conditions. Our optional High Lift Gate is designed to give 72" of clearance when fully opened. Elliptical rock body shown with optional high lift gate. 3" x 4" Sub Frames are standard equipment for both the eliptical and bathtub style bodies. 4" x 4" tubing set on the diamond acts as a shedder top rail. Our bathtub style body offers the protection of all 1/4" AR400 construction without sacrificing capacity. Compare the features, quality and price. We at Western Construction Components Inc. are sure you will see the advantages of our Western Rock Tubs. Elliptical rock body shown with optional high lift gate, ditch gate, built-in tool boxes and pull tarp system. All Rectangular Bodies come with a ¼" AR400 floor Sides, Headboard, and Tailgate can be upgraded to ¼" T-1 Steel. Tapered sides and Tailgates are available on our Rectangular Bodies Our Rectangular Dump Body shown with optional high lift gate and pull tarp system. Tapered body shown with sloped gate and 3 optional ditch gates. Balemount or Doghouse Mount Cylinders available on all models of dump bodies. Let Western Construction Components custom build your dump body, whatever style you should choose, for whatever demands your job requires. We build our eliptical and bathtub rock bodies with the same materials and construction techniques as our well respected end dump trailers. The quality of our products and customer satisfaction are our number-one concern at Western Construction Components. STANDARD SPECIFICATIONS ELLIPTICAL BATHTUB RECTANGULAR Length of Body 14' or 15' 14' or 15' 14' or 15' Side Height 42' 42' 36' Inside Lower Corner Radius 35" 12" 12" Tub Construction ¼" AR400 ¼" AR400 ¼" AR400 floor Side Board Pockets Optional Optional Standard Headboard and Tailgate Material ¼" AR400 ¼" AR400 3 Air Activated Gate Latches Included Included Included ¼ Cabshield, 10 GA. Included Included Included Hydraulic Cylinder 6", 4 stage 135" 6", 4 Stage, 135" 6", 4 Stage, 135" Tailgate (Standard) Top Hinge Top Hinge Top Hinge Subframe 3"x4" Tubing 3" x 4" Tubing Hinge/Saddle only Light Kit (Sealed) Included Included Included Hoist Mounting Doghouse/ Balemount Doghouse/ Balemount Doghouse/ Balemount Safety Strut Included Included Included Hydraulic Tank Center Mounted 20 Gal. Center Mounted 20 Gal. Center Mounted 20 Gal. Rear Hinge Incorporated in Subframe Incorporated in Subframe Included 8' Rear Apron and Chains Included Included Included Ladders into Body Located on left side at rear Located on left side at rear Located on left side at rear Finish of Bodies Metal Blasted 2 part primer Metal Blasted 2 part primer Metal Blasted 2 part primer /16" A-572 OPTIONAL FEATURES Body Lengths From 10' To 18' Painted Any Color (White or Black Standard) Side Heights From 24" To 66" Factory Installation Available Air Operated High Lift Gate Up To 3 Ditch Gate Installed In Tailgates Watertight Gate With Twist Locks Tub Thickness Up To ½" AR400 Manual and Electric Tarping System Available Extra Lighting Available Built-in Tool Boxes Available L.E.D. Lighting Available Tapered Sides and Tailgate Available Lift/Steer Auxillary Axles Available Full Length Fenders for use with Liftsteer Air Activated Mud Flaps Auxillary Axles MANUFACTURED BY: Western Construction Components Inc. 9484 Mission Park Place Santee, CA 92071 Phone (619) 596-5696 Parts Dept. (619) 596-5692 Fax (619) 596-5699 Internet HTTP://www.westconco.com e-mail [email protected] Sold by:
© Copyright 2026 Paperzz