WWW.2KM.ORG
2 KOMPONENTEN MASCHINENBAU
METERING AND MIXING SYSTEMS
SilcoStar 923
Hydraulically actuated Metering Unit for the Processing of LSR
Optimized Barrel Emptying
Gratitude to the combination of two completely
new developed systems the residual quantity in the
200 l barrel can easily and comfortably be reduced
to a minimum. The required follower plate deaeration in case of change of barrel is effected automatically (optional) and reduced to a minimum quantity gratitude to a new technology. The barrel floor
support avoids dents in the baseboard.
Different filling quantities of the A and B component may be levelled out thanks to the use of a new
metering pumps generation. This technology helps
reduce the residual amount in the vessels to
approx. 1%.
Possible annual savings in a 3-shift Operation /
365 days
Shot Weight 12g, Barrel change: once in 7 days
Savings: approx. 8,300.00 €/a
Shot Weight 5g, Barrel change: once in 4 days
Savings: approx.18,200.00 €/a
Shot Weight 50g, Barrel change: once in 2 days
Savings: approx. 32,850.00 €/a
(calculation may vary do to cost of material)
Basic Equipment:
– Integrated roll-in device with automatic barrel
bottom support
– Filling level control
– PLC (Beckhoff) with display operation
– 200l follower plate (optimization of remaining
quantity)
– Pressure sensors for lack of material and overpressure
– Standard machine connection (mixer block, pressure reduction valve, outlet valve and static mixer)
– Pallet feet for easy transport by means of jacklift
or forklift truck
– Varnishing in standard paint (RAL 7035 and
RAL 9003)
standard
machine
connection
Advantages
G Potencial capacity savings through totaly, equal complete
and constant emptying of the delivery, vessels
G Integrated roll-in device with automatic barrel
bottom support
G 2-sides operation
G Marginal space required
G Noise reduction gratitude to detchable hydraulic
system
Integrated roll-in
device with
automatic barrel
bottom support
Options:
G Variable delivery volume of each metering pump
G Automatic follower plate deaeration (200l)
G 20l follower plates
G Colour metering 0.3 - 4% with metering valve and
position indicator
variable metering pump
Mobile on rollers
G Proportional colour control
G Colour feeding 0.7l pressure vessel, 10l colour
feeding pump, 20l colour feeding pump with
optional agitator
G Cooled static mixer
G Reciprocal feeding of two LIM units
G Colour shortage control by means of pressure
sensors
Automatic follower plate deaeration (200l)
G Mobile on rollers
G Hydraulic may be switched off
G Varnishing in special paint
colour metering
with metering
valve and position
indicator
4-fold colour feeding
machine connection with cooled static mixer
20l- supply pump
Technical Data:
923 (200l + 20l vessels)
Viscosity
1,000,000 mPas
Processing Quantity:
1500g/min. depending on
the viscosity
Mixing Ratio:
1:1 (optional variable */- 5%)
Colour Metering:
0.3 – 4%
Consumption / Connections
Actuation:
hydraulic
Electric:
175-275VAC / 300 – 480VAC
max. 10A
Connections LIM Unit:
24V
Pneumatic:
R1/4“, 6bar, low
Weight:
approx. 800kg
Dimensions:
(1.030 x 1,335 x 2,190)mm
[W x D x H]
Silicone metering machines:
2KM Group
2KM Germany
2KM UK
2KM Spain
2KM North America
2KM China
SilcoStar 923
PFM 6000
SilcoStar 930P
SilcoStar 1950
WWW.2KM.ORG
SilcoStar
e -flow
SilcoStar PCM LSR
SilcoStar 950H
P F M medical
rocess
low
ix
SilcoStar 922 HighFlow
PFM Servo LSR
2 Komponenten Maschinenbau GmbH · Industriestraße 6a · D- 51709 Marienheide-Rodt · Fon +49-2264-4590-0 · Fax +49-2264-4590-49 · www.2km.org