.ag
.ag
Burst Ag® is a state of the art injectable tool powered by SynTech®, the
world’s only synthetic acid. Burst Ag can be injected through your
irrigation system. Regular use will lower sodium and bicarbonate
levels.
Burst Ag® is a state of the art injectable tool powered by SynTech®, the
world’s only synthetic acid. Burst Ag can be injected through your
irrigation system. Regular use will lower sodium and bicarbonate
levels.
USE DIRECTIONS
Foliar Application
Mix 64 ounces of Burst Ag in up to 50 gallons of water and apply
directly to one acre of crop tissue. Best results are achieved when
Burst is lightly irrigated to deliver Burst from the tissue into the soil
profile.
USE DIRECTIONS
Foliar Application
Mix 64 ounces of Burst Ag in up to 50 gallons of water and apply
directly to one acre of crop tissue. Best results are achieved when
Burst is lightly irrigated to deliver Burst from the tissue into the soil
profile.
Direct Soil Application
Mix 128 ounces of Burst Ag in up to 50 gallons of water and apply
directly to one acre of treated soil. Best results are achieved when
Burst is lightly irrigated into the soil.
Direct Soil Application
Mix 128 ounces of Burst Ag in up to 50 gallons of water and apply
directly to one acre of treated soil. Best results are achieved when
Burst is lightly irrigated into the soil.
Injection
Inject128 ounces per acre of treated soil. Best results are achieved
when Burst Ag is injected at the end of the irrigation cycle with the
minumum amout of water.
Injection
Inject128 ounces per acre of treated soil. Best results are achieved
when Burst Ag is injected at the end of the irrigation cycle with the
minumum amout of water.
Consult your local representative for details regarding when to best
apply Burst and in what frequency.
DISCARD
Rinse empty container w/water and discard
as per federal, state and local regulations.
CONTAINS NON-PLANT FOOD INGREDIENTS
FIRST AID
If swallowed, drink two glasses of
with water for two minutes. If
symptoms persist seek medical
advice.
In case of skin contact wash
thoroughly with soapy water. As
with all chemicals, keep out of
childrens reach.
For Commercial and
Industrial Use Only
<1% Cocamide
>5% Coco esters
<37% Soya Fatty Acids, ME Esters
>57% Inert Ingredients
APPROVALS AND REGULATIONS
Non-Regulated, Non-Corrosive, Non-Skin Irritant
Consult your local representative for details regarding when to best
apply Burst and in what frequency.
DISCARD
Rinse empty container w/water and discard
as per federal, state and local regulations.
CONTAINS NON-PLANT FOOD INGREDIENTS
(22 lbs.)
with water for two minutes. If
symptoms persist seek medical
advice.
In case of skin contact wash
thoroughly with soapy water. As
with all chemicals, keep out of
childrens reach.
For Commercial and
Industrial Use Only
<1% Cocamide
>5% Coco esters
<37% Soya Fatty Acids, ME Esters
>57% Inert Ingredients
APPROVALS AND REGULATIONS
Non-Regulated, Non-Corrosive, Non-Skin Irritant
For dealer informationand locations call 1-877-424-6979 or visit www.enviromfg.com.
Environmental Manufacturing Solutions, L.L.C. 7705 Progress Circle Melbourne, FL 32904
For dealer informationand locations call 1-877-424-6979 or visit www.enviromfg.com.
Environmental Manufacturing Solutions, L.L.C. 7705 Progress Circle Melbourne, FL 32904
Net Contents:
2.5 Gallons
FIRST AID
If swallowed, drink two glasses of
55 Gallons
275 Gallons
(495 lbs.)
(2,475 lbs)
Net Contents:
2.5 Gallons
(22 lbs.)
55 Gallons
(495 lbs.)
275 Gallons
(2,475 lbs)