Europe - Plate
Index
Doc. Ref.
Last update
Description
Plate_A10-02_E
Plate_A20-02_E
Plate_A30-02_E
1/07/2011
1/07/2011
1/07/2011
Global Challenges in Heavy Steels
Wider perspectives
Dimensional Program
Plate_B10-03_E
Plate_B20-02_E
Plate_B30-02_E
Plate_B40-02_E
1/07/2011
1/07/2011
1/07/2011
1/07/2011
Structural Steels
Laser Cutting Steels
Floor Plates
Steels with improved resistance to atmospheric corrosion
Plate_C10-02_E
1/07/2011
Shipbuilding Steels
Plate_D10-03_E
Plate_D20-03_E
Plate_D30-03_E
1/07/2011
1/07/2011
1/07/2011
Boiler Plate and Pressure Vessel Steels
Alloy Steels, High Carbon Steels
Line Pipe Steels
Plate_E10-02_E
1/07/2011
Tool steels - Engineering steels
Plate_F10-03_E
Plate_F20-03_E
Plate_F30-03_E
1/07/2011
1/07/2011
20/01/2012
High Yield Strength Steels
Advanced High Strength Steel - S700 MC
Extra High Strength Steel - Quend 700
Plate_G10-07_E
Plate_G20-07_E
20/01/2012
20/01/2012
Abrasion Resistant Plates - Quard 400
Abrasion Resistant Plates - Quard 450
Plate_S10-02_E
Plate_S20-02_E
1/07/2011
1/07/2011
Shot Blasting & Priming
Quality System Certifications
Plate_X10-04_E
1/07/2011
Contacts
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Global Challenges
in Heavy Steels
With its three European plants specialized in heavy plates,
NLMK Plate Europe produces a wide scope of solutions for
1
A complete offer
the industrial manufacturers seeking a large diversity of steel
Thanks to a wide range of hot rolled and forged plates and
grades and thickness.
forged bars, with technical characteristics and dimensions
suitable for different applications and processes, the ‘Plate’
NLMK Clabecq (Ittre, Belgium), NLMK DanSteel A/S
division of SIF supports its customers in the successful completion
(Frederiksvaerk, Denmark) and NLMK Verona (Verona, Italy)
of their projects.
have joined their know-how and experience to enhance steel
Thickness: 3 to 1500 mm
Length: up to 24 m
Width: up to 3250 mm
Weight: up to 50 t
supply to their numerous customers and to offer an extended
panel of products and services on worldwide markets.
Through an intensive programme of improvement and
investment in production tools and management, both
companies have focused their development on high added
value products. They are committed to bring the highest
expertise in the manufacturing processes in order to deliver
quality steels.
Expert in the rolling and forging of plates in a wide array of
carbon, low alloy and alloy steel grades, our ‘Plate’ division
supplies the most demanding industry sectors, including:
• construction of earthmoving, mining and quarrying
machinery
• mechanical construction
• structural steelwork
• construction of pressure vessels and tanks
• construction of pipelines for gas, oil and water
• shipbuilding
• construction of wind generators and other energy
installations
• second transformation
Thanks to their high involvement, the 3 mills are involved in a
large number of industrial projects.
The professional expertise of both companies enables them to
advise customers on the choice of steel products for optimum
compliance with stipulated constraints.
They have both integrated flexibility in their production
management and achieve rolling and forging according to
Plate_A10-02_E
specific requirements while always focusing on high quality.
2 Three competitive partners
has also opened a service centre for transforming plates, in order
to shorten lead times for its customers.
NLMK Clabecq : THIN & LIGHT
DanSteel‘s material is hot-rolled, normalised rolled, thermome-
Based in Ittre in Belgium, close to the green hills of Walloon
industry standards and customers requirements. DanSteel’s plate
Brabant, the NLMK Clabecq factory produces medium and
chanically (TM) rolled or normalised after rolling, according to
production programme includes structural steel, steel for shipbuil-
heavy steel plates in thickness from 3 to 120 mm.
ding, boilers and pressure vessels, as well as steel for windmills,
NLMK Clabecq uses a sophisticated production facility, a
its ongoing investment plan, the company is constantly develo-
unique combination comprising a reversible quarto line, a
4-stand continuous finishing line and a new fast cooling system
(commissioned in 2007). The cooling system is ideally positioned at
the end of the line and enables superior mechanical characteristics
to be obtained. This industrial facility reliably produces lowthickness steel plates with top class surface aspect and flatness.
NLMK Clabecq ships its plate production to the four corners
of the earth (more than a quarter of production goes outside
in which field the company has become the benchmark. Through
ping its product range to consolidate its presence in existing and
new markets.
The company is well aware of its social responsibility and pays
particular attention to the environment. With this in mind, it has
developed a «Climate strategy» and implemented strict standards
for energy consumption and waste.
NLMK Verona: THICK & HEAVY
Europe). It also enjoys a reputation for high quality in sectors
where advanced expertise is required. Year after year, world
NLMK Verona, situated in Northern Italy, is specialized in the
leaders in sectors like construction, energy, shipbuilding and
production of forging ingots, forged and rolled plates in thickness
heavy handling equipment remain loyal to NLMK Clabecq, and
from 20 to 1500 mm.
vice versa!
After completing the second phase of investments (normalization
NLMK Clabecq strives every time to stay ahead in terms of
and quenching & tempering of heavy plates, new ingot reheating
development. Its latest investment is a brand new quenching and
furnaces, final extension of main building, annealing furnaces,
tempering line for steels with high added value.
final revamping of continuous casting and automation of plate
mill), NLMK Verona has launched new grades in the boiler plates
Success in this strategic direction has involved integrating SIX
and tool steel categories.
SIGMA methodology into the company culture, with the objective
of raising efficiency through constant improvement projects.
The immediate success of these new products in strategic markets
where the company intends to grow may be the beginning of
NLMK DanSteel : WIDE & LARGE
NLMK Verona’s main core business.
With a view to increasing their share of the international market,
DanSteel enjoys an excellent location in Frederiksværk, Den-
NLMK Veronas aims to meet the needs of its clients with the
mark, less than an hour from Copenhagen. The convenient geo-
technical expertise of its staff, and flexibility in terms of production
graphical location together with the company’s very own port
among the different sized products which is unequalled among
make it possible to deliver by sea, rail or road as preferred by the
their competitors.
customer and within a very short time. At the same time, having
its own port means easy access to raw materials such as slabs,
mainly from NLMK.
Specialising in hot-rolled steel plates, it offers a wide range of
dimensions, with thickness between 6 and 150mm, and widths
between 1000 and 3250mm. With its new normalising units, it
can now heat-treat up to 70% of its production. DanSteel
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_A10-02_E
Europe - Plate
Europe - Plate
Wider
perspectives
With the combination of all forces of NLMK Clabecq, NLMK
With our high performance steels, resulting from permanent
DanSteel A/S and NLMK Verona, we open new perspectives
research and testing, demanding professionals find the right
to users looking for a global answer for medium, heavy and
partner who can fulfil their requirements: quality, service and
very heavy plates.
delivery.
NLMK Plate Europe produces indeed one of the largest ranges of
thickness for hot rolled and forged steel.
Hot rolled plates
EN 10025-2
Forged plates
Forged bars
EN 10025-2
EN 10025-2
EN 10025-3
Structural Steels
EN 10025-4
EN 10025-5
EN 10149-2
Shipbuilding
(cfr product sheet)
Tool steels/
Engineering steels
EN 10027-2
EN 10027-2
(upon request)
Pressure vessels
EN 10028-2
EN 10028-3
EN 10028-5
EN 10028-2
EN 10028-3
(upon request)
Alloy steels
EN 10028-2
EN 10028-2
(upon request)
EN 10083-2
(upon request)
High carbon steels
EN 10083-2
Line pipe steels
ISO 3183
Abrasion resistant steel
QUARD (mill norm)
Ingots*
Symbols:
Polygonal, round, slabs and square
also available as floor plates /
can also be ordered with aptitude to laser cutting /
also available in (Advanced) High Strength Steel /
High performance steels
* For all information about ingots, please make contact with NLMK Verona (Fabio Gondolo, T: +39 045 6997 919 - F: +39 045 6997 901, [email protected])
You find more details for all these products in the specific data sheets.
Plate_A20-02_E
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Dimensional
Program
NLMK Plate Europe offers an incomparable range of dimensions. Thanks to its plant configurations, it can
deliver its steels as hot rolled plates, forged plates or forged bars.
1 Hot Rolled Steel Plates
The following table gives the dimensional maximum capabilities of our production mills. For the specific dimensional mix of the steel and the
grade of your choice, please consult the information on the data sheet or contact your sales representative.
Width
Thickness
1000 1100 1200 1300 1400 1500 1600 1650 1700 1750 1800 1900 2000 2100 2200 2300 2400 2500 2600 2650 2700 2730 2750 2800 2850 2900
3
4
5
6
7
8
9
10
12
15
18
20
25
30
35
40
45
50
60
70
80
90
100
110
120
130
140
150
16,3 16,3
18,0 18,0
24,0 24,0
24,0 24 ,0
24,0 24,0
24,0 24,0
24,0 24,0
24,0 24,0
24,0 24,0
21,6 21,4
17,2 17,1
14,4 14,3
12,3 12,2
10,8 10,7
9,6 9,5
8,6 8,6
7,2 7,1
6,2 6,1
5,4 5,3
4,8 4,8
4,3 4,3
3,9 3,9
3,6 3,6
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,0
19,1
16,4
14,3
12,8
11,5
10,4
9,6
1000 1100 1200
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,1
17,3
15,1
13,4
12,1
10,1
8,6
7,5
6,7
6,0
5,5
5,0
16,3 16,3* 16,3*
16,3 16,3 16,3
16,3 16,3 16,3
18,0 18,0 18,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
22,4 20,9 19,6
18,7 17,4 16,4
16,0 15,0 14,0
14,0 13,1 12,3
12,5 11,6 10,9
11,2 10,5 9,8
9,3 8,7 8,2
8,0 7,5 7,0
7,0 6,5 6,1
6,2 5,8 5,5
5,6 5,2 4,9
5,1 4,8 4,5
4,7 4,4 4,1
16,3* 16,3* 16,3*
16,3 16,3 16,3
16,3 16,3 16,3
18,0 18,0 18,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
24,0 24,0 24,0
23,8 23,1 24,0
19,0 18,5 24,0
15,9 15,4 24,0
13,6 13,2 24,0
12,0 12,0 24,0
10,6 10,3 24,0
9,5
9,2 22,4
7,9
7,7 18,7
6,8
6,6 16,0
5,9
5,8 14,0
5,3
5,1 12,4
4,8
4,6 11,2
4,3
4,2 10,2
4,0
3,8
9,3
16,3*
16,3*
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,7
17,7
15,5
13,8
12,4
12,0
10,5
9,5
8,5
7,5
7,0
6,0
16,3*
16,3*
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,5
19,6
16,8
14,7
13,1
12,0
10,5
9,0
7,5
7,0
6,0
5,5
5,0
16,3*
16,3*
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
22,3
18,6
16,0
14,0
12,4
12,0
12,0
11,0
9,5
8,5
8,0
7,0
6,5
6,0
5,5
5,0
1300 1400 1500 1600 1650 1700 1750 1800 1900 2000
16,3*
16,3*
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
21,3
17,7
15,2
13,3
12,0
12,0
12,0
10,5
9,5
8,0
7,5
6,5
6,0
5,5
5,0
5,0
2100
16,3*
16,3*
16,3*
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,3
16,9
14,5
12,7
12,0
12,0
12,0
10,0
9,0
8,0
7,0
6,5
6,0
5,5
5,0
4,5
2200
16,3*
16,3*
16,3*
18,0*
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
19,4
16,2
13,9
12,1
12,0
12,0
11,5
9,5
8,5
7,5
7,0
6,0
5,5
5,0
5,0
4,5
2300
16,3*
16,3*
16,3*
18,0*
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,3
18,6
15,5
13,3
12,0
12,0
12,0
11,0
9,5
8,0
7,0
6,5
6,0
5,5
5,0
4,5
4,5
2400
16,3*
16,3*
16,3*
18,0*
24,0*
24,0
24,0
24,0
24,0
24,0
24,0
22,3
17,9
14,9
12,8
12,0
12,0
12,0
10,5
9,0
8,0
7,0
6,0
5,5
5,0
4,5
4,5
4,0
2500
16,3*
16,3*
18,0*
24,0*
24,0*
24,0
24,0
24,0
24,0
24,0
21,5
17,2
14,3
12,3
12,0
12,0
12,0
10,0
8,5
7,5
6,5
6,0
5,5
5,0
4,5
4,0
4,0
2600
16,3*
18,0*
24,0*
24,0
24,0
24,0
24,0
24,0
24,0
21,1
21,0
17,5
17,5
13,1
12,0
12,0
10,0
8,5
7,5
6,5
6,0
5,5
5,0
4,5
4,0
4,0
2650
16,3*
18,0*
24,0*
24,0*
24,0
24,0
24,0
24,0
24,0
20,7
16,5
13,8
12,0
12,0
12,0
11,5
9,5
8,5
7,0
6,5
6,0
5,0
5,0
4,5
4,0
4,0
2700
16,3*
18,0*
24,0*
24,0*
24,0
24,0
24,0
24,0
24,0
20,5
16,4
13,6
12,0
12,0
12,0
11,5
9,5
8,5
7,0
6,5
4,1
3,7
5,0
4,5
4,0
16,2
13,5
12,0
12,0
12,0
11,5
9,5
8,0
7,0
6,5
4,1
3,7
4,5
4,5
4,0
12,0
12,0
12,0
12,0
12,0
11,0
9,5
8,0
7,0
6,0
12,0
12,0
12,0
12,0
12,0
11,0
9,0
8,0
7,0
6,0
12,0
12,0
12,0
12,0
12,0
11,0
9,0
7,5
6,5
6,0
4,5
4,0
4,0
4,5
4,0
4,0
4,5
4,0
4,0
2730 2750 2800 2850 2900
All mentioned thickness and/or width and/or length combinations are not always available for all qualities/quantities.
Indicative maximum piece weight : 50 tons (NLMK Clabecq: 18 tons)
Dimensions outside standard program : please enquire our sales department.
Plate_A30-02_E
*maximum width depends of steel grade and thickness
Category
A
B
C
D
Tensile strength N / mm2
R < 490
490 ≤ R ≤ 600
600 < R ≤ 700
R > 700
3 - 3.99 mm
2500*
2300*
2000*
1500*
4 - 4.99 mm
2600*
2400*
2200*
1800*
5 - 5.99 mm
cfr table
2500*
2400*
2200*
6 - 6.99 mm
cfr table
2600*
2500*
2300*
7 - 9.99 mm
cfr table
cfr table
2600*
2500*
≥ 10 mm
cfr table
cfr table
cfr table
cfr table
3
4
5
6
7
8
9
10
12
15
18
20
25
30
35
40
45
50
60
70
80
90
100
110
120
130
140
150
Plate_A30-02_E
Europe - Plate
2 Forged Plates
The coloured cells of this table indicate the possible dimensional mix (thickness/width).
The maximum length depends on the net weight of the output ingot (20-50 tons)
Width
Output ingot 20 / 50 tons net
Output ingot 20 / 50 tons net
Output ingot 20 / 50 tons net
Thickness
1000 1100 1200 1300 1400 1500 1600 1650 1700 1800 1900 2000 2100 2200 2250 2300 2400 2500 2600 2700 2800 2900
151
200
250
300
350
400
450
500
550
600
151
200
250
300
350
400
450
500
550
600
1000 1100 1200 1300 1400 1500 1600 1650 1700 1800 1900 2000 2100 2200 2250 2300 2400 2500 2600 2700 2800 2900
3 Forged Bars
The coloured cells of this table indicate the possible dimensional mix (thickness/width).
The maximum length depends on the net weight of the output ingot (13/16/19/19,5/24/25/28,5 tons)
Width
Thickness
1000 1100 1200 1300 1400 1500 1600 1650 1700 1800 1900 2000 2100 2200 2250 2300 2400 2500 2600 2700 2800 2900
361
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
361
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
Output ingot
13/16/19/19,5/24/25/28,5 ton net
1000 1100 1200 1300 1400 1500 1600 1650 1700 1800 1900 2000 2100 2200 2250 2300 2400 2500 2600 2700 2800 2900
IMPORTANT: the thickness of 1500mm is reached for tool steels and engineering steels. See the specific data sheet for more
details
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and
use of the steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Structural
Structural
Steels
Steels
1 Steel description and applications
As a result of joining the
forces of NLMK Clabecq,
NLMK DanSteel A/S and
NLMK Verona into one
unique division, we propose
one of the largest range of
thickness in structural steels.
Our long experience in these
steels is another advantage,
as we can meet most of your
technical requirements.
For a long time, we have
proven our know-how in the
following sectors:
• earthmoving, mining and quarrying machinery
• mechanical construction
• structural steelwork
• oil & gas storage tanks
• wind towers
• etc.
Our structural steels are also developed to enhance
processability:
• laser steels(*) make it possible to cut them with high precision
• cold forming steels optimize the forming properties in order to
guarantee an excellent finishing
As you sometimes expect more of your steel for outside
applications, we also propose special solutions:
• steels with improved resistance to atmospheric corrosion(*)
combine strength and inner protection against weathering
effects
• floor plates(*), with their numerous combinations of grades
and thickness, are an answer for higher security in longlasting hard weather and utilization conditions
Whether you are looking for a widespread mix of thickness, small
quantities in any grade or when you have special requirements,
our plates and bars keep each time the same high quality which
makes their reputation.
Our sales representatives help you to
find the most appropriate plates to fulfill
your specific requirements.
Don’t hesitate to contact us.
2 Standards
Plate_B10-03_E
EN 10025-2
Japanese
JIS 3106
Canada
CSA G40-21
USA
ASTM
S185
1.0035
A283 Gr. A,B,C,D
Thanks
in structural
S235JRto its experience
1.0038
SM 400 A steel, NLMK
230 G Clabecq can meet
S235J0
1.0114 in termsSMof400quality
B
all the
expectations
- even the toughest ones - in
S235
J2
1.0117
SM
400
C
the following sectors:
S275 JR
1.0044
260 W, WT
A572 Gr. 42
S275 JO
1.0143
A36
S275 J2
1.0145
A573 Gr. 65
S355 JR
1.0045
SM 490 A
350 W, WT
A633 Gr. C,D
S355 JO
1.0553
SS 490 B
S355 J2
1.0577
SS 490 C
A573 Gr. 70
S355 K2
1.0596
SS 490 YB
S235 JRC
1.0122
S235 JOC
1.0115
S235 J2C
1.0119
S275 JRC
1.0128
S275 JOC
1.0140
S275 J2C
1.0142
S355 JRC
1.0551
S355 JOC
1.0554
S355 J2C
1.0579
S355 K2C
1.0594
EN 10025-3
USA
ASTM
EN 10025-5 (*)
USA
ASTM
S275 N
1.0490
S235 JOW
1.8958
J2Wquarrying
1.8961 machinery
S275 NL
1.0491
•construction
of earthmoving, miningS235
and
S355 JOW
1.8959
A588
S355
N
1.0545
•mechanical construction
S355
JOWP
1.8945
S355 NL
1.0546
A572 Gr. 50
•structural steelwork
S355 J2W
1.8965
S420 N
1.8902
A572 Gr. 60
•oil & gas storage tanks
S355 J2WP
1.8946
S420 NL
1.8912
•construction
of wind towers
S355 K2W
1.8967
S460 N
1.8901
•etc.
S460 NL
1.8903
If you need medium thickness, small quantities in any type or when
USAsame
USA our plates keep each time the
you have
special requirements,
EN 10148-2
EN 10025-4
ASTM
ASTM
high quality which makes their reputation.
S315 MC
1.0972
S275 M
1.8818
S355 MC
1.0976
A656 Gr. 50
S275 ML
1.8819
OurS355
sales
help you to find
appropriate
plates
S420the
MC most1.0980
A656 Gr.
60
M representatives
1.8823
S460hesitate
MC
1.0982
S355 ML
1.8834 requirements.
A945
to fulfill
your specific
Don’t
to contact them.
S500 MC
1.0984
A656 Gr. 70
S420 M
1.8825
S550 MC
1.0986
A656 Gr. 80
S420 ML
1.8836
A945
1.8974
S700MC (*)
S460 M
1.8827
S460 ML
1.8838
(*) see also the specific data sheets
for these products
3 Dimensions
Hot Rolled Steels
Grades
Structural
EN 10025-2
Cold forming
EN 10149-2
EN 10025-3
Weldable
Fine Grain
EN 10025-4
Steels With
Improved
Atmospheric
Corrosion
Resistance
EN 10025-5
Thickness
S 185
S 235 JR
S 235 JO
S 235 J2
S 275 JR
S 275 JO
S 275 J2
S 355 JR
S 355 JO
S 355 J2
S 355 K2
E 295
E 335
S 235 JRC
S 235 J2C
S 275 J2C
S 355 JOC
S 355 J2C
S 355 K2C
S 355 MC
S 420 MC
S 460 MC
S 500 MC
S 550 MC
S 700 MC
S 275 N
S 275 NL
S 355 N
S 355 NL
S 420 N
S 420 NL
S 460 N
S 460 NL
S 275 M
S 275 ML
S 355 M
S 355 ML
S 420 M
S 420 ML
S 460 M
S 460 ML
S 355 JOWP
S 355 J2WP
S 235 JOW
S 235 J2W
S 355 JOW
S 355 J2W
S 355 K2W
max. thickness range:
3-150
(depending on the
norm or on the delivery condition, it may
be limited to 25,40mm,
120mm or 130 mm)
Please contact us
for the feasibility!
Forged Plates
Width/
length
Delivery
Conditions (2)
A
as rolled (AR),
normalized rolled
or normalized (N),
thermomechanically
controlled rolled (M)
(3)
Forged Bars
(3)
Thickness
Delivery
Conditions
Thickness
Delivery
Conditions
151-360
as rolled (AR),
normalized
rolled or
normalized (N)
361-1000
as rolled (AR),
normalized rolled
or normalized (N)
Certificates
(2.1)
2.2/3.1/3.2
B
4,76-120
12-16
A
3-30
normalized rolled
or normalized (N)
2.2/3.1/3.2
normalized rolled or
normalized (N)
2.2/3.1/3.2
B
3-20
B
5-20
C
8-16
10-16
A
3-120
B
3-70
3-25,40
normalized rolled or
normalized (N)
3.1/3.2
C
A
3-63
B
3-40
3-25,4
C
3-12
B
A
3-80
thermomechanically
controlled rolled (M)
(1)
thermomechanically
controlled rolled (M)
as rolled (AR),
normalized rolled
or normalized (N)
(2.1)
2.2/3.1/3.2
B
(1) between 64 and 80: max width is 2750mm – (2) the plant may not accept certain delivery conditions in order to respect mechanical results – (3) no production of ‘J2+AR’ and ‘JR+N’
4 Elementary precautions
As the workability of structural steels differs from the one to the other,
it is recommended to observe elementary precautions and to strictly
follow the instructions given in the norms and in the technical guides
before using advanced techniques for cutting,welding, forming, etc...
Our technical experts are at your disposal for any request or
requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_B10-03_E
Europe - Plate
Europe - Plate
Laser Cutting
Steels
1 Steel description and applications
3 Technical characteristics
Laser steels are designed to meet the stringent requirements of
This kind of steel is guaranteed with:
•low silicon content: Si ≤ 0.04%
•sulphur content: S ≤ 0.015%
•phosphorus content: P ≤ 0.025%
thermal and automated cutting. They were especially developed
to ensure a perfect laser cutting.
Due to their chemical composition, optimised surface quality
Surface Properties
and improved flatness, the laser cutting steels offer cost-effective
Laser steels have an improved surface quality which leads to a
advantages such as:
•cutting speed increase up to 40%
•excellent cut quality
•easy tailored blanking
constant and optimum cutting speed. The surface quality is in
Laser steels are suitable for galvanizing. The weldability is
Class A, unless otherwise agreed. Flatness tolerances are in
accordance with EN 10163-2 Class B3.
Tolerances
Thickness tolerances are in accordance with EN 10029
excellent, independently from the welding technology used.
accordance with EN 10029 Class S. We guarantee this
2 Standards
Packaging (optional)
Waterproof paper wrapping.
flatness before, during and after the cutting.
Laser cutting steels are available in accordance with following standards:
•EN 10025 (S 235, S 275, S 355)
•EN 10149 (S 355 MC, S 420 MC, S 460 MC, S 500 MC)
•Shipbuilding (up to EH36)
4 Delivery conditions
This steel is delivered in thermomechanically controlled rolled
conditions.
5 Dimensions
Grades
Thickness (mm)
Width (mm)
Length (mm)
Type S 235
Type S 275
Type S 355
Type S 355 MC
Type S 420 MC
Type S 460 MC
Type S 500 MC
8 - 25
8 - 25
8 - 25
8 - 20
8 - 20
8 - 20
8 - 16
max 2500
max 2500
max 2500
max 2500
max 2500
max 2500
max 2500
max 15000
max 15000
max 15000
max 15000
max 15000
max 15000
max 15000
Note: For others grades and sizes, please enquiry our sales department
Plate_B20-02_E
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing
and use of the steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Floor Plates
1 Steel description and applications
Tear Plates Type 1
Thanks to its four stand continuous finishing mill, NLMK Clabecq
produces floor plates in an unrivalled range of sizes and steel
grades. That unique combination makes them perfect in all
circumstances and in all environments.
Their specific shape gives them undisputed advantages:
•maximise anti-slip properties, especially in greasy and
outdoor environments
•resistant to continuous passing
•long lasting in hard weather and utilization conditions
•supports common impacts
Pattern
Length = 31 mm
Width = 10 mm
Height = 1 - 2 mm ( 0.03937“ - 0.07874“ )
Tear Plates Type 2
The floor plates of NLMK Clabecq are mainly made for:
•building applications
•ship and offshore platforms decks
•stairways
•mobile bridges, dock levellers
•etc.
Pattern
Length = 26 mm
Width = 9,4 mm
Height = 1 - 1,7 mm ( 0.03937“ - 0.06692“ )
2 Dimensional program
Thickness
Width
3
4
5
6
7
8
9
10
12
20
25.4
1000 1100 1200 1300
16,3
16,3
16,3 16,3 16,3 16,3
18,0 18,0 18,0 18,0
18,0 18 ,0 18,0 18,0
18,0 18,0 18,0 18,0
18,0 18,0 18,0 18,0
18,0 18,0 18,0 18,0
18,0 18,0 18,0 18,0
18,0 18,0 18,0 18,0
18,0 18,0 18,0 18,0
1000 1100 1200 1300
1400
16,3
16,3
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1400
1500
16,3*
16,3
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1500
1600
16,3*
16,3
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1600
1700
16,3*
16,3
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1700
1800
16,3*
16,3*
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1800
1900
16,3*
16,3*
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1900
1930
16,3*
16,3*
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
1930
2000
16,3*
16,3*
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2000
2100
16,3*
16,3*
16,3
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2100
2200
16,3*
16,3*
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2200
2300
16,3*
16,3*
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2300
2400
16,3*
16,3*
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2400
2500
16,3*
16,3*
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2500
2600 2700 2730
16,3*
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2600
All mentioned thickness and/or width and/or length combinations are not always available for all qualities/quantities.
Plate_B30-02_E
Dimensions outside standard program : please enquire our sales department.
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2700
16,3*
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
2730
3
4
5
6
7
8
9
10
12
20
25.4
3 Delivery conditions
GRADE
DELIVERY CONDITIONS*
Euronorms
S235
S275
S355
S460
in as rolled conditions,
normalized rolled, normalized or
thermomechanical controlled
rolled conditions
Shipbuilding qualities
Grade A, B, D, E
Grade A(H)36, B(H)36, D(H)36, E(H)36
ASTM
A36
A283 Grade C
A572 Grade 50 type 1
* depending on the steel and width
4 Elementary precautions
As the workability of these steels differs from the one to the other, it
is recommended to observe elementary precautions and to strictly
follow the instructions given in the norms and in the technical guides
before using advanced techniques for cutting,welding, forming, etc...
Our technical experts are at your disposal for any request or
requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_B30-02_E
Europe - Plate
Europe - Plate
Steels with improved
resistance to
atmospheric corrosion
1 Steel description and applications
Our weathering steels are produced with a good balanced
presence of copper and chromium and can be efficiently integrated
in many industrial, architectural or artistic projects. Their structure
enables a good regular self regenerating protection layer on the
surface. They combine inner high strength with nice natural brown
aspect. Their resistance and their aspect make them a cost-effective
solution, especially for outdoor use, with or without painting.
We produce numerous grades for a large panel of applications:
• steel frame structures
• bridges
• façades
• sculptures
• containers
• contemporary interiors
2 Standards and technical specifications
A
Standard
B
EN 10025-5 / 04
S235 J0W
S235 J2W
Grades
- S355 J0WP
S355 J0W
Thanks to its experience in structural steel, NLMK Clabecq can meet •construction of earthmoving, mining and quarrying machinery
- S355 J2WP
S355 J2W
all the expectations in terms of quality - even the toughest ones - in •mechanical construction
S355 K2W
steelwork
the
following
sectors:
Delivery
conditions
in as•structural
rolled conditions, normalized
rolled or normalized
Technical aspect
•oil & gas storage tanks
- Chemical specifications
higher phosphorus level
•construction of wind towers max 0,025 phosphorus
355
MPa
235/355 MPa
- Min. yield point
•etc.
higher
toughness
Advantages
enhanced weathering protection
good weathering protection
If you need medium thickness, small quantities in any type or when
(2.1)
Certificates
you have2.2special
requirements, our plates keep each time the same
/ 3.1 / 3.2
high quality which makes their reputation.
Our sales representatives help you to find the most appropriate plates
Plate_B40-02_E
to fulfill your specific requirements. Don’t hesitate to contact them.
Europe - Plate
Dimensions
Plate_B40-02_E
3
Hot Rolled Steel Plates
Width
Thickness
1000 1100 1200 1300 1400 1500 1600 1700 1750 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2730 2750 2800 2850 2900
3
4
5
6
7
8
9
10
12
15
18
20
25
30
35
40
45
50
60
70
80
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
21,6
17,2
14,4
12,3
10,8
9,6
8,6
7,2
6,2
5,4
16,3
18,0
24,0
24 ,0
24,0
24,0
24,0
24,0
24,0
21,4
17,1
14,3
12,2
10,7
9,5
8,6
7,1
6,1
5,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,0
19,1
16,4
14,3
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,1
17,3
15,1
13,4
12,1
10,1
8,6
7,5
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
22,4
18,7
16,0
14,0
12,5
11,2
9,3
8,0
7,0
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,9
17,4
15,0
13,1
11,6
10,5
8,7
7,5
6,5
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
19,6
16,4
14,0
12,3
10,9
9,8
8,2
7,0
6,1
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,1
18,5
15,4
13,2
12,0
10,3
9,2
7,7
6,6
5,8
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
22,4
18,7
16,0
14,0
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,7
17,7
15,5
13,8
12,4
12,0
10,5
9,5
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,5
19,6
16,8
14,7
13,1
12,0
10,5
9,0
7,5
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
22,3
18,6
16,0
14,0
12,4
12,0
12,0
11,0
9,5
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
21,3
17,7
15,2
13,3
12,0
12,0
12,0
10,5
9,5
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,3
16,9
14,5
12,7
12,0
12,0
12,0
10,0
9,0
16,3
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
19,4
16,2
13,9
12,1
12,0
12,0
11,5
9,5
8,5
16,3
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
23,3
18,6
15,5
13,3
12,0
12,0
12,0
11,0
9,5
8,0
16,3
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
22,3
17,9
14,9
12,8
12,0
12,0
12,0
10,5
9,0
8,0
18,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
21,5
17,2
14,3
12,3
12,0
12,0
12,0
10,0
8,5
7,5
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,7
16,5
13,8
12,0
12,0
12,0
11,5
9,5
8,5
7,0
24,0
24,0
24,0
24,0
24,0
24,0
24,0
20,5
16,4 16,2 12,0 12,0 12,0
13,6 13,5 12,0 12,0 12,0
12,0 12,0 12,0 12,0 12,0
12,0 12,0 12,0 12,0 12,0
12,0 12,0 12,0 12,0 12,0
11,5 11,5 11,0 11,0 11,0
9,5 9,5 9,5 9,0 9,0
8,5 8,0 8,0 8,0 7,5
7,0 7,0 7,0 7,0 6,5
3
4
5
6
7
8
9
10
12
15
18
20
25
30
35
40
45
50
60
70
80
1000 1100 1200 1300 1400 1500 1600 1700 1750 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2730 2750 2800 2850 2900
4 Elementary precautions
As the workability of these steels differs from the one to the
other, it is recommended to observe elementary precautions
and to strictly follow the instructions given in the norms and
in the technical guides before using advanced techniques for
cutting,welding, forming, etc... Our technical experts are at your
disposal for any request or requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of
the steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Shipbuilding
Steels
1 Steel description and applications
The plates of NLMK Clabecq are designed for the following
Thanks to its knowledge of the specific needs of the shipbuilding sector,
NLMK Plate Europe delivers steel plates in the proper time and place,
fully integrating the strict requisites for a particular use in this sector.
It produces these plates in accordance with relevant national
applications:
•commercial ships ( container vessels, specialized vessels )
•passengers vessels ( Cruise & Ferries Vessels, Yachts )
•military ships
•submarines
•etc.
and international standards ( Lloyd’s Register, American Bureau of
Shipping, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd,
For improved working conditions, the plates can be supplied shot
RINA, ASTM A 131, etc. )
blasted and primed (from 3 to 70 mm).
2 Standards
Lloyd’s Register
A
B
D
E
Plate_C10-02_E
AH 27 S
DH 27 S
EH 27 S
AH 32
DH 32
EH 32
AH 36
DH 36
EH 36
AH 40
DH 40
EH 40
Det Norske Veritas Germanischer Lloyd
Bureau Véritas
American Bureau
of Shipping
RINA
Russian Maritime
ASTM
A131
NV A
NV B
NV D
NV E
GL-A
GL-B
GL-D
GL-E
A
B
D
E
A
B
D
E
A
B
D
E
A
B
D
E
A
B
D
E
CS
NV A32
NV D32
NV E32
NV A36
NV D36
NV E36
NV A40
NV D40
NV E40
NV A420
NV D420
NV E420
NV 2-4
NV 4-4
GL-A 32
GL-D 32
GL-E 32
GL-A 36
GL-D 36
GL-E 36
GL-A 40
GL-D 40
GL-E 40
AH 32
DH 32
EH 32
AH 36
DH 36
EH 36
AH 40
DH 40
EH 40
AH 32
DH 32
EH 32
AH 36
DH 36
EH 36
AH40
DH40
EH40
AH 32
DH 32
EH 32
AH 36
DH 36
EH 36
AH 40
DH 40
EH 40
A 32
D 32
E 32
A 36
D 36
E 36
A 40
D 40
E 40
AH32
DH32
EH32
AH36
DH36
EH36
AH40
DH40
EH40
3 Technical and dimensional characteristics
STANDARD
GRADE
LR
NV
BV
Grade A(H)32, D(H)32, E(H)32
ABS
GL
PLATE THICKNESS (MM)
PLATE WIDTH
Grade A, B, D, E
3 - 120
Grade A(H)36, D(H)36, E(H)36
According to the relevant norms,
shipbuilding plates can be delivered
in following conditions:
- as rolled conditions
- normalized rolled conditions
- thermomechanically
controlled rolled conditions
- normalized condition
Grade A, B, D, E
Grade A(H)32, D(H)32, E(H)32
3 - 100
Grade A(H)36, D(H)36, E(H)36
Grade A, B, D, E
ASTM A 131
DELIVERY CONDITIONS *
Grade AH32, DH32, EH32
- thickness ≤ 25,40 mm (1’’):
depends on steel grade
and thickness (max. 2 730 mm)
- thickness >25,40 mm (1’’):
max. 2 750 mm
6,36 - 100
Grade AH36, DH36, EH36
* Unless otherwise agreed at the time of the order
Plate length: max. 24000 mm (depending on thickness and width).
Indicative maximum piece weight: 18 t.
4 Elementary precautions
As the workability of these steels differs from the one to the other, it
is recommended to observe elementary precautions and to strictly
follow the instructions given in the norms and in the technical guides
before using advanced techniques for cutting,welding, forming, etc...
Our technical experts are at your disposal for any request or
requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_C10-02_E
Europe - Plate
Europe - Plate
Boiler Plate and
Pressure Vessel
Steels
1 Steel description and applications
We propose carbon and alloy steels enabling manufacturers to
produce large high-pressure vessels. Our range varies from medium
plates of small thickness, produced by NLMK Clabecq or NLMK
DanSteel A/S, to very thick bars forged by NLMK Verona. They meet
the requirements of a variety of relevant national and international
standards.
Our steels find their way in the following applications :
• storage tanks, storage spheres
• pressure vessels
• boilers
• heat exchangers
• gas turbines
• compressors
These steel grades are characterized by yield strengths from minimum
235 N/mm² to minimum 460 N/mm² and by good weldability.
The fine-grain structural steel grades are suitable for mechanical
forming and excellent welding.
2 Standards
Europe
EN 10028-2
EN 10028-3
India
EN 10028-5
P 235 GH
Japan
U.K.
IS 2002
JIS G 3115
JIS G 3103
BS1501
ASTM
Gr. 1
SPV 235
SB 410
A 285
Gr. A, B, C
SPV 315
SB450M
SB 450
151
Gr. 360, 400, 430
161
Gr. 360, 400, 430
154
Gr. 360 E, 400 E, 430E
164
Gr. 360, 400
223
Gr. 460, 490
224
Gr. 400, 430, 460, 490
SPV 355
SB 480
Gr. 2 A
P 265 GH
P 275 NH
P 275 NL 1
P 275 NL 2
Gr. 2 B
16 Mo3
P 295 GH
13 Cr Mo 4-5
P 355 GH
A 516
Gr. 55, 60, 65, 70
A 537
Class 1
A 612
P 355 N
P 355 NH
P 355 NL 1
P 355 NL 2
P 355 M
P 355 ML 1
P 355 ML 2
P 420 M
P 420 Ml1
P 420 Ml2
P 460 M
P 460 NH
P 460 NL1
P 460 Nl2
EN 10028-4
Plate_D10-03_E
U.S.A.
11 Mn Ni 5-3
13 Mn Ni 6-3
P 460 ML1
P 460 ML2
225
Gr. 490
A 662
Gr. A, B, C
A 387
Gr. 12 cl.2
A 662
Gr. A, B, C
3 Technical & dimensional characteristics
Grades
High temperature
Fine grain weldable
transport
hazardous
material
Carbon steel with low and
intermediate resistance
to tension
low and
intermediate
Lower and resistance to
moderate
tension
temperature
high resistance
to tension
Alloy Cr- Mo
C - Mn - Si steels
P 235 GH
P 265 GH
P 295 GH
P 355 GH
16 Mo 3
13 Cr Mo 4-5 (1)
P 275 NH
P 275 NL1
P 275 NL2
P 355 N
P 355 NH
P 355 NL1
P 355 NL2
P 460 NH
P 460 NL1
P 460 NL2
P355 M
P355 ML1
P355 ML2
P420 M
P420 ML1
P420 ML2
P460 M
P460 ML1
P460 ML2
Hot Rolled Steels
Width/
Thickness
Length (2)
A
3 - 120
5 - 60
B
Forged bars (4)
Thickness
Thickness
150 - 250 (3)
361 - 1000 (5)
150 - 250 (3)
361 - 1000 (5)
150 - 250
361 - 1000
B
A
3 - 120
B
3 - 25,40
Forged plates
Delivery
conditions
Normalized rolled or
normalized
Norm. + tempered
(3)
150 - 250 (3)
(5)
361- 1000 (5)
C
Normalized rolled or
normalized
Normalized
B
Thermomechanically
controlled rolled
3 - 25,40
5 - 15
B
Normalized
ASTM A 285 Gr. C
3 - 50
A
As rolled
ASTM A 516 Gr. 55
ASTM A 516 Gr. 60
ASTM A 516 Gr. 65
ASTM A 516 Gr. 70
3 - 120
ASTM A 612
8 - 25,40
5 - 60
4,76 - 100
- Hot Rolled Steel plates 3.1/3.2
(width > 2750 mm : 3.1)
- Forged plates : 3.1
- Forged bars : to be defined
C
P 400 NGJ4
ASTM A387 Gr.11 Cl. 2
ASTM A387 Gr.12 Cl. 2 (1)
ASTM A537 Cl. 1
Certificates
A
As rolled normalized
B
C
As rolled
C
B
B
Annealed, normalized
and quenched
Normalized
(1) ‘13 Cr Mo 4-5’ and ‘ASTM A387 Gr.12 Cl. 2’ are equivalent steels - (2) Consult the data sheet ‘Dimensional Program’ to know the maximum widths and lengths (3) Width: 1500 or 2000mm / Length: following output ingots (20-24 tons net) - (4) upon request (5) Width: 1500-2000mm / Length: following output ingots (13/16/19/19,5/24/25/28,5 tons net)
4 Technical precautions
As the workability of boiler plates and pressure vessels steels differs
and in the technical guides before using advanced techniques for
from the one to the other, it is recommended to observe elementary
cutting, welding, forming, welding, etc... Our technical experts
precautions and to strictly follow the instructions given in the norms
are at your disposal for any request or requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use
of the steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_D10-02_E
Europe - Plate
Europe - Plate
Alloy steels,
High carbon steels
1 Steel description and applications
As a result of its expertise in forging and rolling alloy and high
All these steels are preferred for applications with elevated
carbon steel plates, NLMK Plate Europe is supplying its plates in
temperature and where long life service is required, as:
• welded boilers
• power stations
• pressure vessels
• fittings
• etc.
accordance with a variety of relevant national and international
standards.
Its plates with Cr-Mo steel grades present good strain strength
combined with good toughness.
The high carbon steels are characterized by their hardness.
2 Standards
Heat Treatment Steels
Cr, Mo, Cr-Mo Steels
Europe
EN 10028-2
16 Mo 3
13 Cr Mo 4-5
N.B.:
Europe
U.S.A.
ASTM
EN 10083-2
C 35 (E/R)
C 40 (E/R)
C 45 (E/R)
A 387
Gr. 11, 12
U.S.A.
ASTM A830
1033
to
1046
EN 10083-2
C 35
C 40
C 45
(E) = with a specified max. S content
(R) = with a specified S range
3 Dimensions
Plate_D20-03_E
GRADE
16 Mo3
13 Cr Mo 4-5
A 387 Grade 11 Class 2
A 387 Grade 12 Class 2
C 35
C 35 E
C 35 +N
C 35 E+N
C 40
C 40 E
C 40 +N
C 40 E+N
C 45
C 45 E
C 45 E+N
C 45 +N
C 45 +S
Hot Rolled Steels
Thickness
Width/Length (1)
3 - 120
B
5 - 60
Forged Plates
Forged Bars (2)
Thickness
Thickness
120-290
B
C
4 - 120
B
upon request
5 - 120
C
7 - 120
D
7 - 150
30 - 150
D
D
120-360
150-360
(1) Consult the data sheet ‘Dimensional Program’ to know the maximum widths and lengths - (2) max. length: 12m
Delivery Conditions
Normalized
Normalized and tempered
Normalized and tempered
Normalized and tempered
As rolled
As rolled
Normalized or normalized rolled
Normalized or normalized rolled
As rolled
As rolled
Normalized or normalized rolled
Normalized or normalized rolled
As rolled
As rolled
Normalized or normalized rolled
Normalized or normalized rolled
Stress relieved
Plate_D20-03_E
Europe - Plate
4 Technical precautions
As the workability of alloy steels and high carbon steels differs from
the one to the other, it is recommended to observe elementary precautions and to strictly follow the instructions given in the norms
and in the technical guides before using advanced techniques for
cutting, welding, forming, etc... Our technical experts are at your
disposal for any request or requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Line pipe
Steels
1 Steel description and applications
NLMK Plate Europe offers premium plates thermomechanically rol-
They are available for sweet or sour service application levels PH3
led in order to produce pipes with excellent mechanical properties.
and PH5. They meet the highest requirements needed for all the
Thanks to its extended research, it has gained a valuable experience
constraints of these applications.
in delivering high quality line pipe steels.
Thermomechanical rolling enables the production of API grades
The pipeline plates of NLMK Plate Europe are suitable for liquid or
plates in a thickness range from 6,35 up to 50,00 mm with stringent
gas transport in:
• onshore pipelines
• deepwater environment
• fittings
mechanical properties.
on line
US testing
Own HIC
laboratory
2 Standards and dimensions (*)
ISO 3163:2007
PSL1
PSL2
NON SOUR SERVICE
Grade
Thickness Max
X52 or L360
X60 or L415
X65 or L450
X70 or L485
50 mm
30 mm
25,4 mm
25,4 mm
Grade
X52N or L360N
X60N or L415N
X65N or L450N
X70N or L485N
NON SOUR SERVICE
Thickness Max
Grade
40 mm
30 mm
25,4 mm
12,7 mm
Thickness Max
X52M or L360M
X60M or L415M
X65M or L450M
X70M or L485M
X80M or L555M
30 mm
30 mm
25,4 mm
25,4 mm
20,6 mm
SOUR SERVICE
Grade
Thickness Max
X52MS or L360MS
X60MS or L415MS
X65MS or L450MS
X70MS or L485MS
X80MS or L555MS
25,4 mm
25,4 mm
25,4 mm
19,05 mm
15,9 mm
Ø
18“- 34“
(*) subject to approval by NLMK Plate Europe depending on grade, dimensions and
technical specifications.
3 Technical precautions
As the workability of the line pipe steels differs from the one to the other, it
using advanced techniques for cutting, welding, forming, etc...
is recommended to observe elementary precautions and to strictly follow
Our technical experts are at your disposal for any request or
the instructions given in the norms and in the technical guides before
requirement.
Plate_D30-03_E
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Tool Steels
Engineering Steels
1 Steel description and applications
We offer a large range of tool and engineering steels which
Thanks to the flexibility of our tools, we can deliver quality tool steels
can easily combine toughness with conditioning, shaping and
as blocks (raw or machined) or as round bars (raw or peeled).
cutting. All these steels respond adequately to your needs of
Our extremely large range of thickness renders steels that meet your
manufacturing hard and resistant tools and moulds. Whether you
highest expectations
need them to withstand impact loading or to enable sharp cutting
edges, they are made to ensure performance and durability.
We propose numerous grades for a large panel of applications:
• plastic molding dies
As a result of the right balance in alloys, our tool steels support
• die-casting die blocks
high temperature without deformation. Their structure enhances their
• blanking and stamping dies
polishing properties.
• metal cutting tools
• extrusion tools
• hammers and sledges
2 Standards
Plate_E10-02_E
DIN
W.1.7131 / W.1.7147
DE
W.1.6562
W.1.7225
W.1.72218
Chemical
16 MnCr5 / 20MnCr5
18NiCrMo5
20MnCrMo2
34CrNiMo6
36CrNiMo4
39NiCrMo5
40NiCrMo7
42CrMo4
25CrMo4
W.1.1730
W.1.1820
W.1.2363
W.1.2842
W.1.2343
W.1.2344
W.1.2367
W.1.2714
C45+S or +N
C55+S or +N
X100CrMoV5
90MnCrV8
X37CrMoV5-1
X40CrMoV5-1
X38CrMoV5-3
55NiCrMoV7
Extra Nr.45
Extra Nr.55
PM5
Z1B
WP5
WP5V
DM3X
A50
W.1.2083
W.1.2085
W.1.2311
W.1.2312
W.1.2316
W.1.2738
W.1.2767
X40Cr14
HC50
40CrMnNiMo8-6-4
40CrMnNiMo8-6-4
X38CrMo16
40CrMnNiMo8-6-4
X45NiCrMo4
MCM
MCMS
R65
SS
2511-08
AISI
JAPAN
E4340
4140
4130
420 Grade-C
1148 /1045
JIS SCCrM 1 , JIS SCM 2
2541-03
2244-05
VNC4
1672-08
A2
O2
H11
H13
L6
S7
420 modified
420F
P20
P20+S
P20+Ni
6F7
S45C
SKD12
SKD61
SUS420
SNCM 2
Plate_E10-02_E
Europe - Plate
3 Technical characteristics
Category
Plastic mould
steels
Hot work steels
Cold work steels
Steel grade
W.1.2311
W.1.2312
W.1.2738
AISI-S7
W.1.2083
W.1.2085
W.1.2316
W.1.2767
W.1.2714
W.1.2343
W.1.2344
W.1.2367
W.1.1730 - C45 +S +N
W.1.1820 - C55 +S +N
W.1.2363 - AISI A2
W.1.2842
Hot
Rolled
plates
X
X
X
X
X
X
Round
Forged forged
blocks bars
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Delivery conditions
Dimensional
Program (1)
Hardened and tempered
A1/A2
Hardened and tempered/Annealed
Certificates
B
Annealing
Hardened and tempered/Annealed
A1/A2
Annealing EFS according to specification
NADCA
B
Natural/Annealing/Normalized
A1/A2
Annealing
B
3.1
US SEP 1921
- 20-400 mm: Class 3 E/e
- 400-600 mm: Class 3 D/d
- 600-1250 mm: Class 3 C/c
(rem: hot rolled steel plates in
C45/C55 +N - > class 3 C/c)
(1) Please refer to the table underneath to find the dimensional program to apply to the selected steel.
4 Dimensional program
A1
B
Hot Rolled Plates
Forged Rolled Plates
Round
Forged Bars
All
Thickness (mm)
Width (mm)
20-150
2000
150-250 1000/1500/2000/2500
250-300 1000/1500/2000/2500
300-350
1500/2000/2500
350-600
2000/2500
Diameter (mm)
Length
180-1500
Based on ingot size
(25 or 50 t)
Round
Forged Bars
All
Diametro (mm)
Length
180-1500
Based on ingot size
(25 t)
Forged Blocks
Spessore (mm)
150-250
265-300
310-450
Larghezza (mm)
600-1000
600-1300
900-1300
Round
Forged Bars
All
Diametro (mm)
Length
180-700
Based on ingot size
A2
Forged blocks
Spessore (mm)
500-900
Larghezza (mm)
1800
950-1250
900-1800
5
Technical precautions
As the workability of these steels differs from the one to the other, it
before using advanced techniques for cutting, welding, forming, etc...
is recommended to observe elementary precautions and to strictly
Our technical experts are at your disposal for any request or
follow the instructions given in the norms and in the technical guides
requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and
use of the steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
High Yield
Strength Steels
1 Steel description and applications
NLMK Plate Europe produces plates for pressure vessel applications
Based on his unique combination of a quarto reversing mill and a
and structural qualities with high strength point in accordance with
four stand continuous finishing mill, NLMK Plate Europe is supplying
relevant international standards.
these qualities mainly used for :
These steel grades are characterised by a minimum yield strength
“P“- qualities :
•pressure vessels
•boilers
of 380 to 700 N/mm2, by good weldability and high resistance
to brittle cracking.
These fine - grain steel grades offer excellent cold - forming properties
and are often used for special applications at low temperatures
(below -20°C).
“S“- qualities:
•bridges and steel buildings
•heavy machinery
•road and mining machines ( bulldozer, excavator, lift truck )
•special trucks
2 Standards
Europe
EN 10028 - 3
P 460 NH*
P 460 NL 1
P 460 NL 2
EN 10028 - 5
EN 10025 - 3* EN 10025 - 4*
P 420 M
P 420 ML 1
P 420 ML 2
S 420 N
S 420 NL
S 420 M
S 420 ML
P 460 M
S 460 N
S 460 NL
S 460 M
S 460 ML
EN 10149-2
S 420 MC
S 460 MC
P 460 ML 1
P 460 ML 2
S 500 MC
S 550 MC
S 700 MC
*EN 10025-3 replaces EN 10113-2
*EN 10025-4 replaces EN 10013-3
Plate_F10-02_E
*P 460 NH replaces P 460 N
Germany
U.K.
Canada
Japan
U.S.A.
DIN 17102
St E 380
W St E 380
T St E 380
E St E 380
BS 4360
CSA G40 - 21
400 W, WT
JIS
( 3101 ) SS 540
ASTM
A 572
Gr. 60, 65
A 633
Grade E
St E 420
W St E 420
T St E 420
E St E 420
St E 460
W St E 460
T St E 460
E St E 460
55 C
55 EE
( 3115 ) SPV 450
( 3106 ) SM 570
A 656
Gr. 60, 70, 80
3 Technical & dimensional characteristics
GRADE
PLATE THICKNESS (MM)
P 420 M
P 420 ML1
P 420 ML2
P 460 M
P 460 ML1
P 460 ML2
3 - 40
DELIVERY CONDITIONS*
PLATE WIDTH
3 - 25,40
Thermomechanically - controlled rolled conditions
3 - 40
3 - 25,40
P 460 NH
P 460 NL1
P 460 NL2
3 - 25,40
Normalized conditions
S 420 M
S 420 ML
3 - 40
3 - 25,40
Thermomechanically - controlled rolled conditions
- thickness ≤ 25,40 mm (1’’):
depends on steel grade and
thickness (max. 2 730 mm)
S 420 N
S 420 NL
3 - 70
Normalized or normalized rolled conditions
- thickness >25,40 mm (1’’):
max. 2 750 mm
3 - 25,40
Thermomechanically - controlled rolled conditions
Thermomechanically - controlled rolled conditions
Normalized or normalized rolled conditions
Normalized or normalized rolled conditions
S 460 M
S 460 ML
S 460 N
S 460 NL
S 420 MC
S 460 MC
S 500 MC
S 550 MC
S 700 MC
5 - 25
Thermomechanically - controlled rolled conditions
5 - 20
8 - 16
10 - 16
* Unless otherwise agreed at the time of the order
Plate length: max. 24m (depends on thickness and width).
Indicative maximum piece weight: 18 t.
4
Technical precautions
As the workability of these steels differs from the one to the other, it
before using advanced techniques for cutting, welding, forming, etc...
is recommended to observe elementary precautions and to strictly
Our technical experts are at your disposal for any request or
follow the instructions given in the norms and in the technical guides
requirement.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_F10-02_E
Europe - Plate
Europe - Plate
Advanced High
Strength Steels (AHSS)
S700 MC
1 Steel description and applications
S700 MC is a thermomechanically control rolled
advanced high strength structural steel.
S700 MC is mainly used for:
•lifting appliances
•earthmoving equipment
•truck chassis
NLMK Clabecq produces it now as heavy plate in thickness up
to 20 mm and in maximum width of 2 500 mm.
The competitive advantages such as the excellent weldability and
cold forming characteristics promotes light weight designs for
increased payload and improved total cost savings.
2 Technical characterictics
Testing
Chemical composition
once per heat and 40 tonnes.
Testing of mechanical properties is performed at the surface
Heat analysis, %
C
Mn
Si
≤ 0,12
≤ 2,0
≤ 0,6
P
S
≤ 0,025 ≤ 0,010
Nb
Ti
V
Mo
≤ 0,06
≤ 0,05
≤ 0,2
≤ 0,5
Tolerances and surface properties
The S700 MC plates meet the requirements stated in the norms
EN 10163-2 about surface properties (class A, subclass 1)
Carbon equivalent, typical values, %
CEV
max 0,38
Plate thickness
10-20 mm
and EN 10029 about tolerances:
CET
max 0,25
(1)
(2)
• thickness: class A
• flatness: class N or S (to be specified by the customer)
(1) CEV = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15
At your request, the S700 MC
(2) CET = C + (Mn+Mo)/10 + (Cr+Cu)/20 + Ni/40
plates can be produced with
more
Mechanical properties*
Yield
Strength
Tensile
Strength
Elongation
% (A)
> 680
> 750
12
stringent
Typical thickness tolerance
(NLMK Clabecq)
tolerances
on thickness, giving you the
10 mm
opportunity to maximize your
production performance.
* According to EN 10149-2
At your request, the S700 MC plates can also be delivered in
Charpy-V notch impact test
in the shotblasted and painted condition.
Plate_F20-03_E / 01.07.2011
Transversal / Longitudinal (-40°C)
Smallest individual value
Mean value
≥ 28 J
≥ 40 J
3 Dimensions
Cold forming
NLMK Clabecq can supply its S700 MC plates in the following
range:
The S 700 MC plates are suitable for cold forming.
The recommended smallest bending radius for the S 700 MC
plates is 2,5 times the plate thickness (bending angle ≤ 90°).
• thickness: 10 - 20 mm
The recommended smallest die opening is 10 times the thickness.
• width: 1500 - 2500 mm
Grinding of flame cut or sheared edges in bending area is
NLMK Clabecq will continue to broaden its range of high yield steels.
recommended to avoid cracking.
Do not hesitate to follow the developments on our website or contact
your local NLMK Clabecq representative for more information.
Welding
The low carbon equivalent of S700 MC enables all conventional
welding methods to be used without requirements of preheating.
The excellent weldability and tolerances makes the steel well
4 Heat treatment
The S700 MC plates of NLMK Clabecq are produced under
thermomechanically control rolled conditions according to standard
EN 10149-1 and EN 10149-2. Any heat treatment of this steel
suited for fully automated welding operations.
In general, welding recommendations in accordance with
EN 1011 should be followed.
above 580° C may impair its properties.
5 General processing indications
The correct choice of material and processing method is of high
importance for an effective workability.
Cutting
The S700 MC plates can be cut by machining or by conventional
flame cutting. They do not require preheating.
Machining
The S700 MC plates offer the same excellent machinability as
conventional steels.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_F20-03_E / 01.07.2011
Europe - Plate
Europe - Plate
Extra High Strength
Structural Steel
Quend 700
1 Steel description and applications
3 Dimensions
Quend 700 is extra high strength structural steel produced as
MPa. Quend 700 complies with the requirements corresponding to the
Quend 700 is currently supplied in the following range:
• thickness: 8 - 25 mm
• width: 1500 - 3000 mm
S690QL given in the EN 10025-6 standard, where impact toughness
NLMK Clabecq is continuing the extension of its dimensional
quenched and tempered with a minimum yield strength of 700
is guaranteed at -40 °C.
program in order to offer as soon as possible a thickness range from
3 to 40 mm. For more information, please check our website or
Quend 700 is recommended for the following applications:
• truck chassis
• lifting and hoisting equipment
• handling equipment
• trailers …
contact your local NLMK Clabecq representative.
4 Flatness, tolerances & surface properties
Quend 700 is delivered with a unique combination of
excellent flatness, tight thickness tolerances and superior
2 Technical characteristics
surface finish.
Tensile properties
Yield strength
Tensile Strength
Elongation
700 MPa min
780 - 930 MPa
14% min
Rp 0.2
Rm
FLATNESS
A5
THICKNESS tolerance
Impact toughness
Shape, length, width tolerances
Minimum values at
0 °C
-20 °C
-40 °C
35 J
30 J
27 J
Transverse testing according to
EN 10025 option 30.
SURFACE properties
Thickness < 12 mm subsized
charpy V specimen have been
used.
0,20
0,60
1,50
S
Nb
Cr
0,020 0,010 0,040
0,60
V
Ti
0,070 0,040
Carbon equivalent, typical values, %
Plate_F30--02_E / 01.07.2011
PLUS
meets EN 10029
exceeds the usual market standards
PLUS
and painted condition. They can also be ordered unpainted.
Max ladle analysis , %
P
- meets and exceeds EN 10029 Class A
- tighter tolerances upon request
Our Quend plates are supplied as standard in the shotblasted
The steel is fine grain treated
Mn
PLUS
Quend 700 is delivered as quenched and tempered.
Chemical composition
Si
- EN 10029: . Class N (standard) &
. Class S
5 Delivery conditions
Testing according to EN 10025.
C
Norm
Feature
TRANSVERSE TESTING
Ni
Al
Mo
1,00
0,070
0,50
N
B
0,014 0,005
6 Heat treatment
The mechanical properties of Quend 700 has been obtained
by quenching and tempering. For not losing the guranteed
properties of Quend 700, the plate should not be used in
Plate thickness
CEV(1)
CET(2)
applications requiring hot working and service temperatures
8-20 mm
0,42
0,29
above 590 °C.
(1) CEV = C+Mn/6 (Ni+Cu)/15+ (Cr+Mo+V)/5
(2) CET = C+(Mn+Mo)/10+Ni/40 +(Cr+Cu)/20
7 General processing recommendations
To obtain optimal work shop productivity when processing Quend 700, it is essential to use the recommended procedures and tools
given below.
Thermal cutting
Welding
Quend 700 may be cut either by oxygen fuel, plasma and laser
Welding of Quend 700 can be performed using any of the
cutting without any restrictions.
conventional welding methods available both as manual or
automatic.
In the present thickness interval, ranging up to 20 mm, preheating
Cold forming
prior to welding is not needed.
Quend 700 is very well suited for cold forming operations.
It is always recommended to use low hydrogen electrodes when
Quend 700 complies with the S690QL bending requirements but
welding Quend 700.
offer even closer R/t ratios:
Machining
Minimum recommended R/t ratio when bending of Quend 700
Grade
Thickness
(mm)
Transverse
to rolling (R/t)
Longitudinal
to rolling (R/t)
Width
(W/t)
S690 QL
8 - 20
3.0
4.0
-
Quend 700
8 - 20
2.0
3.0
10
Quend 700 provides a very good machinability and can be
drilled, counter sinked and milled in the same way as any other
700MPa or S690QL Q&T steel.
R = Recommended punch radius (mm), t = Plate thickness (mm) , W – Die opening width (mm)
(bending angle ≤ 90°)
Due to the homogeneous properties of Quend 700, variations in
springback are kept at a low level.
Grinding of flame cut or a sheared edge in the bending area is
recommended to further prevent cracking during bending.
For more information regarding welding, cold forming and machining,
please consult the respective manuals with technical recommendations on
www.quend.me
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_F30-02_E / 01.07.2011
Europe - Plate
Europe - Plate
Abrasion Resistant
steel
Quard 400
1 Steel description and applications
3 Dimensions
Quard 400 is a martensitic abrasion resistant steel with an average
good cold formability and excellent weldability, Quard 400 combines
Quard 400 at present is supplied in the following range:
• thickness: 4 - 30 mm
• width: 1500 - 3100 mm
an outstanding work shop performance and a long lasting wear
NLMK Clabecq carries on the extension of its dimensional program
hardness of 400 HBW. Due to its versatility in terms of high toughness,
resistance.
in order to propose as soon as possible a thickness range from
3 to 40 mm. For more information, please check our website or
Quard 400 is recommended for the following applications:
•mining and earthmoving machinery
•crushing and pulverizing equipment
•buckets, knives, crushers, feeders
•presses
•skips
•excavators
•slurry pipe systems
•screw conveyors
contact your local NLMK Clabecq representative.
4 Flatness, tolerances & surface properties
Quard 400 is delivered with a unique combination of excellent
flatness, tight thickness tolerances and superior surface finish.
FLATNESS
2 Technical characteristics
Hardness guarantee
Hardness
THICKNESS tolerance
Brinell hardness test, HBW according to EN ISO 6506-1,
is performed 1 - 2 mm below the plate surface once
per heat and 40 tonnes.
HBW = 370 - 430
Other mechanical properties (typical values)
Strength
Yield Strength Tensile
- Transverse (MPa)
(MPa)
Charpy-V notch
impact test
40J
1050
(longitudinal at -40 °C)
Plate_G10--07_E / 20.01.2012
0,19
0,60
Mn
1,60
P
0,025
S
0,010
Carbon equivalent, typical values, %
Plate thickness
3.0–7.9 mm
8.0–30.0 mm
CEV(1)
0.32
0.39
CET(2)
0.23
0.27
(1) CEV = C+Mn/6 (Ni+Cu)/15+ (Cr+Mo+V)/5
(2) CET = C+(Mn+Mo)/10+Ni/40 +(Cr+Cu)/20
Cr
0,50
PLUS
meets EN 10029
exceeds the usual market standards,
EN 10163-2 Class A
PLUS
and laser cutting performance, a low zinc silicate primer is
applied. They can also be delivered unpainted.
10
5 Heat treatment
Quard 400 receives its properties by quenching and when
Max ladle analysis , %
Si
SURFACE properties
- meets and exceeds EN 10029 Class A
- tighter tolerances upon request
PLUS
and primed condition. In order to maintain a good weldability
(%)
Chemical composition The steel is grain refined.
C
Shape, length, width tolerances
- EN 10029: . Class N (standard) &
. Class S
Our Quard plates are supplied as standard in the shotblasted
Elongation
A5
1250
Norm
Feature
Ni
0,025
Mo
0,25
B
0,005
applicable by subsequent tempering. The properties of the
delivery condition can not be retained after exposure at
service or preheating temperatures above 250 °C.
Quard 400 is not intended for any further heat treatment.
www.quard.me
7 Ultrasonic testing
Welding
Ultrasonic testing (UT) is used to detect any defect in the
carbon equivalent of the steel. It can be welded using any of the
plate like cracks or porosity. In thickness from 8 mm, all
conventional welding methods, both as manual or automatic.
Quard 400 has a very good weldability, granted by the low
Quard plates are UT tested and delivered in class S2/E2,
according to EN 10160.
Welding of Quard is recommended to be performed at ambient
temperature not lower than +5°C. Subsequent to welding, let
the welded parts slowly cool down to room temperature (never
accelerate the cooling process of the weld).
8 General processing recommendations
If welding using a heat input of 1.7 kJ/mm, preheating is not
To obtain optimal work shop productivity when processing
required in single plate thickness up to 20 mm. The interpass
Quard 400, it is essential to use the recommended proce-
temperature used should not exceed 225 °C.
dures and tools given below.
Soft weld consumables, giving low hydrogen weld deposits
(<= 5 ml/100g), are recommended. The consumable strength
should be as soft as the design and wear mode allows.
Thermal cutting
Plasma and flame cutting can be performed without the need for
In general, the welding recommendation of Quard 400 should be
preheating in thicknesses up to 40 mm, provided the ambient
in the accordance to EN-1011.
temperature is above 0 °C.
Subsequent to cutting, let the cut parts slowly cool down to room
temperature. A slow cooling rate will reduce the risk of cut edge
cracking (never accelerate the cooling of the parts).
Machining
Quard 400 offers good machinability with HSS and HSS-Co
alloyed drills. The feed rate and cutting speed have to be
adjusted to the high hardness of the material.
Cold forming
Quard 400 is very well suited for cold forming operations.
The minimum recommended R/t ratio when bending of Quard
400 is given in the table below:
Thickness
(mm)
Transverse
to rolling (R/t)
Longitudinal
to rolling (R/t)
Width
(W/t)
t ≤ 8.0
8.0 ≥ t < 20.0
t ≥ 20.0
2.5
3.0
4.5
3.0
4.0
5.0
8 – 12
10 – 12
12 – 14
R = Recommended punch radius (mm), t = Plate thickness (mm) , W – Die opening width (mm)
(bending angle ≤ 90°)
Face milling, counter boring and countersinking are best
performed using tools with replaceable cemented carbide
inserts.
For more information regarding welding, cold forming and machining,
please consult the respective manuals
with technical recommendations on
www.quard.me
Due to the homogeneous properties of Quard 400, variations in
springback is kept at a low level.
Grinding of flame cut or a sheared edge in the bending area is
recommended to further prevent cracking during bending.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_G10-07_E / 20.01.2012
Europe - Plate
Europe - Plate
Abrasion Resistant
steel
Quard 450
1 Steel description and applications
3 Dimensions
Quard 450 is a martesitic abrasion resistant steel, with an average
hardness of 450 HBW. The steel offers very high resistance to
abrasive wear and impact granting a longer service life. The
combination of very good cold forming properties and excellent
weldability makes Quard 450 an optimal choice for most wear
applications.
Quard 450 at present is supplied in the following range:
• thickness: 4 - 20 mm
• width: 1500 - 3100 mm
NLMK Clabecq carries on the extension of its dimensional program
in order to propose as soon as possible a thickness range from
3 to 40 mm. For more information, please check our website or
Quard 450 is mainly recommended for the following applications:
•on road tipper and dumper bodies
•cement drum mixer barrels,
•refuse haulers, scrap containers
•buckets, knives
•feeders, skips, screw conveyors
•mining and earthmoving machinery
contact your local NLMK Clabecq representative.
4 Flatness, tolerances & surface properties
Quard 450 is delivered with a unique combination of excellent
flatness, tight thickness tolerances and superior surface finish.
Norm
Feature
2 Technical characteristics
FLATNESS
Hardness guarantee
Brinell hardness test, HBW according to EN ISO 6506-1,
is performed 1 - 2 mm below the plate surface once
per heat and 40 tonnes.
Hardness
HBW = 420 - 480
Strength
Yield Strength Tensile
- Transverse (MPa)
(MPa)
35 J
1100
(longitudinal at -40 °C)
Elongation
A5
(%)
1400
Mn
1,60
Plate_G20--07_E / 20.01.2012
3.0–7.9 mm
8.0–20.0 mm
meets EN 10029
exceeds the usual market standards,
EN 10163-2 Class A
PLUS
Our Quard plates are supplied as standard in the shotblasted
applied. They can also be delivered unpainted.
P
0,025
S
0,010
Carbon equivalent, typical values, %
Plate thickness
PLUS
and laser cutting performance, a low zinc silicate primer is
10
5 Heat treatment
Max ladle analysis , %
Si
0,70
- meets and exceeds EN 10029 Class A
- tighter tolerances upon request
PLUS
and primed condition. In order to maintain a good weldability
Chemical composition The steel is grain refined.
C
0,21
Shape, length, width tolerances
SURFACE properties
Other mechanical properties (typical values)
Charpy-V notch
impact test
THICKNESS tolerance
- EN 10029: . Class N (standard) &
. Class S
CEV(1)
0.38
0.42
CET(2)
0.28
0.32
(1) CEV = C+Mn/6 (Ni+Cu)/15+ (Cr+Mo+V)/5
(2) CET = C+(Mn+Mo)/10+Ni/40 +(Cr+Cu)/20
Cr
0,50
Ni
0,025
Mo
0,25
B
0,005
Quard 450 receives its properties by quenching and when
applicable by subsequent tempering. The properties of the
delivery condition can not be retained after exposure at
service or preheating temperatures above 250 °C.
Quard 450 is not intended for any further heat treatment.
www.quard.me
7 Ultrasonic testing
Welding
Ultrasonic testing (UT) is used to detect any defect in the
carbon equivalent of the steel. It can be welded using any of the
plate like cracks or porosity. In thickness from 8 mm, all
conventional welding methods, both as manual or automatic.
Quard 450 has a very good weldability, granted by the low
Quard plates are UT tested and delivered in class S2/E2,
according to EN 10160.
Welding of Quard is recommended to be performed at ambient
temperature not lower than +5°C. Subsequent to welding, let
the welded parts slowly cool down to room temperature (never
accelerate the cooling process of the weld).
8 General processing recommendations
If welding using a heat input of 1.7 kJ/mm, preheating is not
To obtain optimal work shop productivity when processing
required in single plate thickness up to 20 mm. The interpass
Quard 450, it is essential to use the recommended proce-
temperature used should not exceed 225 °C.
dures and tools given below.
Soft weld consumables, giving low hydrogen weld deposits
(<= 5 ml/100g), are recommended. The consumable strength
Thermal cutting
Plasma and flame cutting can be performed without the need for
should be as soft as the design and wear mode allows.
preheating in thicknesses up to 40 mm, provided the ambient
In general, the welding recommendation of Quard 450 should be
temperature is above 0 °C.
in the accordance to EN-1011.
Subsequent to cutting, let the cut parts slowly cool down to room
temperature. A slow cooling rate will reduce the risk of cut edge
cracking (never accelerate the cooling of the parts).
Machining
Quard 450 offers good machinability with HSS and HSS-Co
alloyed drills. The feed rate and cutting speed have to be
Cold forming
Quard 450 is very well suited for cold forming operations.
The minimum recommended R/t ratio when bending of Quard
450 is given in the table below:
adjusted to the high hardness of the material.
Face milling, counter boring and countersinking are best
performed using tools with replaceable cemented carbide
inserts.
Thickness
(mm)
Transverse
to rolling (R/t)
Longitudinal
to rolling (R/t)
Width
(W/t)
t ≤ 8.0
8.0 ≥ t < 20.0
t ≥ 20.00
3.5
4.0
5.0
4.0
5.0
6.0
10 – 12
10 – 14
12 – 16
R = Recommended punch radius (mm), t = Plate thickness (mm) , W – Die opening width (mm)
(bending angle ≤ 90°)
For more information regarding welding, cold forming and machining,
please consult the respective manuals
with technical recommendations on
Due to the homogeneous properties of Quard 450, variations in
www.quard.me
springback is kept at a low level.
Grinding of flame cut or a sheared edge in the bending area is
recommended to further prevent cracking during bending.
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Plate_G20-07_E / 20.01.2012
Europe - Plate
Europe - Plate
Shot Blasting
& Priming
1 General description
3 Priming
NLMK Clabecq has developed a modern, fully mechanised shot
blasting and priming line which can be used for treating its whole
range of medium and heavy plates, including floor plates, from 3
mm up.
Shot blasted and primed plates are destined for many applications
like vessels, tanks, pipes, handling equipment, frames, bridges or
heavy plate mechanical structures.
Using shot blasting and priming prevents spending unnecessary time
in the workshop or on site while sand-blasting or trying to access
Advantages:
•preserves plates and parts longer
•enables final coating to adhere strongly
Main characteristics :
•one or two sides
•airless process
•type of paint according to specification epoxy primer, zinc rich
epoxy primer or zinc rich ethyl silicate primer
•thickness of film 15 to 30μm (depending on the type of paint
and the primer manufacturer)
difficult parts. Shot blasted and primed plates provide therefore
considerable cost savings and improve working conditions.
2 Shot blasting
Advantages:
•clean surfaces
•facilitates and accelerates cutting and welding
•enables a homogeneous and stable priming thanks to its
roughness
4 Dimensional program
Thickness
Width
Length
3 - 70 mm
1000 - 2750 mm
≤ 18000 mm
Main characteristics :
•one or two sides
•standard of cleanliness after shot-blasting: SA 2 ½ as per ISO
8501-1 or SIS 055900
Plate_S10-02_E
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of
the steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Quality System
Certifications
1 List of Quality Management System
certifications
Organism
Certification reference
BV Certification
ISO 9001:2000
Bureau Veritas
Industrial Approval – survey mode I
Lloyd’s Register
Quality Scheme
American Bureau of Shipping
Manufacturing Assessment
TÜV
AD-Merkblatt & P.E.D.
AFNOR
CE marking & NF-ACIER
Deutsche Bahn
Q1-Lieferant
Ministère de la Défense
AQAP-120
2 Mill homologations – products & process agreements & processus
3 ISO 9001:2000
NLMK Clabecq
NLMK Verona
A.B.S., AFNOR, Bureau Veritas, Det Norske Veritas, Germanische
Lloyd, Deutsche Bahn, Ministère Français de la Défense, Ministère
Français de l’Industrie, RINA, TÜV, …
Plate_S20-03_E
The elements in the data sheet are given for information only and reflect the information known at the time of publishing. This document is intended to give a general guideline for the purchasing and use of the
steels only. The transmitter of this document doesn’t accept any liability for any error or omission in the content of this document.
Values and components quoted must not be considered as being guaranteed unless specifically confirmed separately in writing.
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com
Europe - Plate
Contacts
1 Head offices
NLMK Clabecq S.A.
Rue de Clabecq 101
1460 Ittre - Belgium
Tel: +32 (0)2 3919.100
Fax : +32 (0)2 3919 890
[email protected]
NLMK Verona S.p.A.
Via A. Salieri, 24
37050 - Vallese di Oppeano (VR) – Italy
Tel.: +39 045 6997900
Fax: +39 045 6997901
[email protected]/
[email protected]
NLMK DanSteel A/S
Havnevej 33
3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33
Fax : + 45 47 77.03.02
[email protected]
2 Representatives
Sectors
Sales Managers
Oil & Gas
Yellow Goods, Lifting, Transport
Phone
Antoine HEGER
+32 2 3919 832
Fabiano SPEDICATO
+32 2 3919 826
Tool Steels
Ingots
All other Sectors (Europe)
& Export (third countries)
Fabio PASQUINI
+39 045 6997 900
Fabio GONDOLO
+39 045 6997 919
Dionisio COTTI
+32 2 3919 837
Elena TUFARU
+32 2 3919 840
Silvia LONARDI
+39 045 6997 994
Fax
+32 2 3919 890
+ 39 0456997 901
+32 2 3919 890
+39 045 6997 901
Email
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
More about us at
Plate_X10-04_E
www.eu.nlmk.com
Rue de Clabecq 101 - B-1460 ITTRE - Belgium
Tel: +32 (0)2 391.91.00 - Fax: +32 (0)2 391.98.90
[email protected] - www.eu.nlmk.com
Via A. Salieri, 24 - 37050 Vallese di Oppeano (VR) - Italy
Tel: + 39 045 69.97.900 - Fax: + 39 045 69.97.915
[email protected] - www.eu.nlmk.com
Havnevej 33, DK-3300 Frederiksvaerk - Denmark
Tel: + 45 47 77.03.33 - Fax : + 45 47 77.03.02
[email protected] - www.eu.nlmk.com