50mL Tube Mixer
Model #A5101
Intended Use:
For In Vitro Diagnostic Use.
The 50mL Tube Mixer is intended for mixing magnetically labeled antibodies,
biological solutions, and cell suspensions as well as for the incubation and
cultivation of biological liquids.
Intended for use in the United States of America and Canada only.
Description:
The 50mL Tube Mixer is designed to provide a gentle mixing environment for paramagnetic antibodies and targeted
cells. This mixer accepts up to five (5) 50mL conical tubes and is applicable in all areas of laboratory research in
biotechnology, microbiology, chemistry, and medicine.
Placing 50mL Tubes into the device
Fully loaded device
Supplied As:
Catalog #
A5101-1
Contains
1 Each
Power Cord (1 piece)
Mixer (1 piece)
Specifications:
•
•
•
•
•
•
•
•
Accepts most standard 50mL conical tubes
Capacity: Up to five 50mL conical tubes
Motion: Reciprocating from a pivot
Duty Cycle: Continuous
Weight: ≤ 1.25 kg (≈2.75 pounds)
AC-DC adapter: Input 90 - 260V 50-60Hz Output: 12v 0.5A
Dimensions: W 255mm / D 144mm / H 158mm
Warranty: 6 Months limited
15339 Barranca Pkwy
Irvine, CA 92618 USA
www.WaveSense.net
Toll Free: 800.807.7760
Phone: 949.341.1980
Fax: 949.341.1982
[email protected]
ML100421-21
© 02/28/12
Page 1 of 2
50mL Tube Mixer
Model #A5101
Storage:
Store dry at room temperature.
Material Safety Data:
Contains plastic and electrical components. In the event of breakage, wear gloves and eye protection for clean up as
some pieces may be sharp and could cause injury. Keep Motor away from liquids. See Operator’s manual for
complete safety information and warnings.
15339 Barranca Pkwy
Irvine, CA 92618 USA
www.WaveSense.net
Toll Free: 800.807.7760
Phone: 949.341.1980
Fax: 949.341.1982
[email protected]
ML100421-21
© 02/28/12
Page 2 of 2