3M™ Architectural Lighting
Custom Formed Reflectors
More light
less energy
3M™ Custom Formed Reflectors increase the optical efficiency of your
light fixture using using engineered reflective optics to raise its lumen
output. These polymeric-based reflectors are made in a free form custom
optical design, and achieve up to 98% in reflectivity. Now you can put light
exactly where you want it and it’s not wasted where you don’t.
Your Lighting Design Needs:
• Light Brightness
- Achieve up to a 30% increase in lumen output by changing your
current design to a Custom Formed Reflector.
• Energy Efficiency
- Custom Formed Reflectors allow you to design reflectors with fewer
LEDs and lower wattage CFL bulbs. Now you can save energy
without sacrificing brightness.
• Light Distribution
- Custom Formed Reflectors give you the design flexibility to place light
exactly where you want it, and not waste it where you don’t.
• Light Quality
- Custom Formed Reflectors are designed to reflect true color.
Applications
• Architectural and retail lighting
• Outdoor, task, down and specialty lighting
More Versatile, More Efficient
Up to 98% Reflectivity
•Save energy with improved light distribution and increased light output. Using fewer LEDs and lower wattage
bulbs gives you the potential to achieve an Energy Star rating.
Free-Formed Design
•Optimized optical designs can be formed into many shapes. Now you can use indirect lighting to cut down
on glare and put light where you want it.
High Efficiency Mixing Chamber
• Build high efficiency mixing chambers resulting in more consistent light output and uniform color fidelity.
Colorless
•The color of your light source will be the output color. Colors stay true.
Non-Conductive
•The polymeric based material is an electric insulator. Place the circuit board right to the reflector form, and
eliminate the need for an insulator.
Corrosion-Free
•Reduce the replacement cost of your reflector form with a non-metal material that won’t rust.
Cost-Effective Production Process
• Achieve dramatic savings in prototype and production tooling with shorter lead times than injection molding.
energy saving
optical efficiency
reduced LED and driver costs
Division Name
3M Operating Unit
Address
City, State, Postal Code
Country
Phone
Fax
Email
Web site address
optimized light distribution
Please recycle. Printed in (Country).
© 3M 2007. All rights reserved.
70-0000-0000-0
corrosion free