IZOSOL
MULTI-PURPOSE LIGHTWEIGHT FILL
IZOSOL
MULTI-PURPOSE LIGHTWEIGHT FILL: - INSULATION
- STABILISATION
- STRUCTURE PROTECTION
- FILLING PROCESS
ADVANTAGES
ACKNOWLEDGMENT
The thermal value of the expanded polystyrene is 100% guaranteed
Low water absortion
Dimensionally stable
Low flame spread
Will not support mould growth
100% Recyclable
Material composed of 98% air and 2% polystyrene
No thermal resistance loss due to static deformation
Environmentally friendly
Without CFC and HCFC
Expanded polystyrene contains 10% recycled content
T. 450.477.4423
Mise à jour : 06/09/2016
6
PS 100%
ULC Certified (type HR and type THR)
1.800.363.2307
FRANSYL.COM
SPECIFICATIONS
DIMENSIONS
IZOSOL
Standard dimension*: 2’ x 4’ x 8’ (610 mm x 1220 mm x 2440 mm)
* Other dimensions available according to requirement specifications
Slope blocks also available
Standard block volume: 64 ft³ (1,8123 m³)
Transportation info: 48 blocks by trailer of 48’ - 3072 ft³ (87 m³)
56 blocks by road train - 3584 ft³ (105 m³)
IZOSOL
Density
(ASTM D 1621)
Thermal transmission
(ASTM C518 C177) 1’’ (25 mm) thickness
16
(HR)
20
(THR)
25
(HD)
30
(THD)
40
(EHD)
60
(EHD)
1 lb/ft³
16 kg/m³
1.25 lbs/ft³
20 kg/m³
1.6 lbs/ft³
25 kg/m³
2 lbs/ft³
32.03 kg/m³
2.5 lbs/ft³
40 kg/m³
3.5 lbs/ft³
56.06 kg/m³
R-3.7
(RSI-0.65)
R-4
(RSI-0.7)
R-4.17
(RSI-0.73)
R-4.2
(RSI-0.74)
R-4.2
(RSI-0.74)
R-4.2
(RSI-0.74)
N/D
75 kPa (10.9 psi)
80 kPa (11.6 psi)
N/D
100 kPa (14.6 psi)
120 kPa (17.5 psi)
N/D
125 kPa (21.1 psi)
140 kPa (23.6 psi)
82 kPa (11.9 psi)
209 kPa (30.3 psi)
210 kPa (30.6 psi)
N/D
242 kPa (35.3 psi)
275 kPa (40.0 psi)
137 kPa (19.9 psi)
406 kPa (59.0 psi)
414 kPa (60.0 psi)
170 kPa
(24.8 psi)
240 kPa
(35.0 psi)
300 kPa
(43.7 psi)
300 kPa
(43.7 psi)
414 kPa
(60 psi)
414 kPa*
(60 psi)
6%
4%
3%
2%
2%
2%
24%
24%
24%
24%
24%
24%
Compressive strength
(ASTM D 1621)
1% deformation
5% deformation
10% deformation
Flexural strength
(ASTM C 203) 1 1/2’’ (38 mm) thickness
Water absorption
(ASTM D 2842) 1 1/2’’ (38 mm) thickness
Limiting oxygen index
(ULC S-701) minimum %
Dimensional tolerance
Thickness
Flatness
Squaring
-3, +5 mm
-3, +5 mm
-3, +5 mm
-3, +5 mm
-3, +5 mm
-3, +5 mm
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
10 mm each 3 m ± 1% 10 mm each 3 m ± 1% 10 mm each 3 m ± 1% 10 mm each 3 m ± 1% 10 mm each 3 m ± 1% 10 mm each 3 m ± 1%
Dimensional stability
1.5%
1.5%
1.5%
1.5%
1.5%
1.5%
64 lbs
80 lbs
103 lbs
128 lbs
160 lbs
224 lbs
(ASTM D 2126) % max changement linéaire
Standard block average weight
*test results pending
ULC evaluation results: Meets requirements CAN/ULC-S701 for type HR and THR
INFRASTRUCTURE SYSTEMS
T. 450.477.4423
1.800.363.2307
FRANSYL.COM