Cover Project and Photo:
Lake Wallenpaupack
1st Impression Landscape
Greentown, PA
www.kennedyconcreteproducts.com
2
Family
Owned
Page 2
Page 7-8
Page 14-15
Page 19
Over 75 Years
FOUR GENERATIONS OF CONCRETE INNOVATIONS
Page 3
Page 9
Page 16
Page 19
Family
Operated
Page 4-5
Page 10-11
Page 6
Page 12-13 (Centerfold)
Page 17
Page 20
Page 18
Page 24
Ask for our Concrete Art Catalog:
Or Check Out all 39 Collections in our complete Gallery of Concrete Art Pavers at
www.kennedyconcreteproducts.com
FOUR GENERATIONS OF CONCRETE INNOVATIONS
For more than 75
years the Kennedy name has been associated
with innovation and excellence in the world of concrete. From our
modest beginnings during the Great Depression, a family legacy
has been built that
grows stronger with
each passing year. This
year is no different. As
we look back on the
Alfred R., Kennedy, Sr; Lewis M. Kennedy,
Garfield Kennedy and Ernest Kennedy
past, we remember the
contributions made by three successive
generations of industry innovators. Lewis
M Kennedy might never have guessed the
impact his decision to open a concrete block
plant would have on the future of his family.
LM Kennedy Concrete Plant (Philadelphia, PA)
THE INNOVATOR
Having observed the early plastic and rubber molds that were becoming more
common in manufacturing Lewis’ son, Alfred R. Kennedy, Sr., and grandson,
Alfred R."Big Al” Kennedy, Jr., identified a trend in the concrete industry toward a more scientific approach in manufacturing. They began investigating the
use of these new molds. As a result of their investigation, in 1988, they started
manufacturing a line of innovative wetcast products outside of Ashland, PA. By
Alfred R. Kennedy, Sr
(1919-2005)
1990, Kennedy Concrete, Inc. had moved to its current location at 570 Dutchtown
Road, Ashland, PA and began marketing custom and stock precast concrete products.
THE ENGINEER
With an earned degree in Engineering from Drexel, “Big Al” applied his
knowledge of engineering to testing and manufacturing a stronger, more dense,
weather resistant product. Some of today's product line has been independent lab
tested and proven able to sustain between 8,000 to 10,000 psi. By the late 1990s,
the company was growing rapidly, and "Big Al” was quietly engineering another
product that would eventually become our bestseller.
Alfred R. “Big Al” Kennedy, Jr
(1940-)
Then in 1998, tragedy suddenly struck. Our plant in Ashland, PA was destroyed
by a fire that wiped out the company's manufacturing capacity. Some might have
thought this would be the end of Kennedy. But our dealers were already selling, and
contractors were installing so much Kennedy product successfully that they patiently
stood beside while we rebuilt the plant. Upon completion of the new plant "Big" Al introduced that new product under the name Blue Mountain Stone. The Blue Mountain
Stone Line was engineered by "Big" Al not only to look and feel like quarried Pennsylvania Blue Stone, but also to meet the rigid demands of landscape architects. Meeting
rigid demands and providing customers quality concrete products is a Kennedy way of
life. As we look forward to a NEW YEAR, we look forward to bringing you a NEW
GENERATION of CONCRETE INNOVATIONS!
3
4
The Blue Mountain Stone Line
Blue Mountain Stone captures the beauty of
Pennsylvania Blue Stone. Its uniform thickness
and standard sizes make it a fantastic substitute
for natural stone and makes laying a random
pattern easy. Its quality is unmatched in the
precast industry. Blue Mountain Stone is a
proven alternative with over 15 years on the
market and a over a million square feet in use.
Rectangular
Square Sizes
12” x 12” - Psq12BMS
18” x 18” - Psq18BMS
24” x 24” - Psq24BMS
18” x 18” w/cutout—
Psq18BMSCutout
Round & Radius
18” Round—Prd18BMS
24” Round—Prd24BMS
24” 45 Degree —Pcv2445BMS
36” 15 Degree—Pcv3615BMS
36” 30 Degree—Pcv3630BMS
18” 45 Degree—Pcv1845BMS
9” x 18” Prec918BMS
12” x 18” - Prec1218BMS
12” x 24” - Prec1224BMS
12” x 36” - Prec3612BMS
18” x 24” - Prec1824BMS
18” x 27” - Prec1827BMS
18” x 30” - Prec1830BMS
18” x 36” - Prec3618BMS
24” x 30” - Prec3024BMS
24” x 36” - Prec3624BMS
5
Blue Mountain Random Stepping Stones
These beautiful stones are replicas of genuine Pennsylvania Blue Stone.
There are five patterns, all stacked on the same pallet.
Approximate size is 18” x 24” Stock # Psp1824RandStone
Available in a number of colors
6
Patio & Walkway
Layouts
6’ Circle Patio
Using
24” Round
24” 45 Degree Curve
6'-0"
36” x 10’ Walk
36” x 10’ Walk
4 - 24” x 24”
2 - 12” x 12”
6 - 12” x 24”
2 - 24” x 36”
1 - 18” x 36”
1 - 18” x 27”
1 - 18” x 24”
1 - 18” x 12”
1 - 9” x 18”
2 - 18” x18”
8'-0"
14'-0"
Circle Patio Kits
8’ or 14’ Diameter
8’ Diameter Circle Kit—PackCircle8
14’ Diameter Circle Kit—PackCircle14
10’ x 10’ Circle Patio Kit
10’ x 10’ Circle Patio Pack—Pack10Round
7
Square Patio Kit
10’ x 10’ Patio Pack #1—Pack1
10’ Square Patio
Packaged as Kit #1
11 pcs 24” x24” 16 pcs 12”x12” & 20 pcs 12” x 24”
8
Patio & Sidewalk Block
Glacial Sizes
12” Round
16” Round
18” Round
24” Round
The Glacial pattern has been a staple
for more than 25 years. We, long
ago, lost track of how many there are
in the field, but much of it is still in
use today.
12” x 12”
16” x 16”
18” x 18”
24” x 24”
12” x 24”
18” x 24”
24” x 30”
24” x 36”
24” 45 Degree Angle
24” x 24”
ADA
Compliant
Paver
The Armed Forces Collection
Honoring Those who Served
18” Round — Prd18SerAir
Kennedy Concrete Art
Gallery Catalog
US Marine Corps
18” Round — Prd18SerMarine
US Army
US Air Force
Is just one of 36 Collections in the
D
18” Round — Prd18SerNavy
D
US Coast Guard
US Navy
D
18” Round — Prd18SerArmy
D
18” Round — Prd18SerCoast-
D
9
Slate
12” Round
18” Round
24” Round
12” x 12”
18” x 18”
Smooth Brick
16” Square
Slate Spanish Tile
Flagstone
18”
18” Round
24” Round
18” x 18”
24” x 24”
w/1/2 Round Top,1/2 Flat
Top, Rt. & Lt. Corners
Basket Weave Brick
Herringbone Brick
18” Square
18” Square
Random Stone
Camden Brick
8” Sq. & 8”x16’Rec/
ADA
24” Square
Lancaster Brick
18” Square
18” Square
16” X 16”
24” x 24”
1/4 Turn Eng.
Cobblestone
w/ cutout
18” Square
w/ cutout
1/4 Turn Eng. Cobblestone Straight English Cobblestone
18” Square
18” Square
10
Leaf
12” Round
16” Round
18” Round
16” x 16”
18” x 18”
16” Hex
w/ 4 sided & 5 sided Half units
12” x 24”
Floral
18” Hex
w/4 sided &5 sided half units
We are One of Only a Few Manufacturers
Still Offering Exposed Aggregates!
Delaware Stone
Maryland Stone
Lilac Stone
12” x 24”
18” x 24”
24” x 36”
12” Round
16” Round
18” Round
24” 45 degree Turn
Crazy Paver
18” Square
18”
24”
30”
12” Square
16” Square
18” Square
12” Hex
16” Hex
1/2 4 side & 5 Side
Slate Crescent
18” Crescent
Cobblestone
12” Square
Split Stone
30” Crescent
Landscape Complement
18” Square
11
Majestic Square 16” x 46”
Majestic Round 16” x 46”
Regency Round 12” x 32”
Have your own fire pit base designed or built.
Consider a Kennedy Cap!
Tested and Proven by the Harsh Winters of the Pennsylvania Mountains
Dimensions
2¼" x 7" x 46½"
2¼" x 10¼" x 50"
2¼" x 10½" x 50½"
2¼" x 13" x 55"
2¼" x 10" x 64½"
2¼" x 12" x 66"
2¼" x 12" x 70½"
2¼" x 14½" x 77½"
2¼" x 14½" x 81"
-
Fire Pit Caps
ID/OD
4 to make circle (Majestic)
4 to make circle (Munich)
4 to make circle (Ashland)
4 to make circle (StoneLedge)
4 to make circle
4 to make circle
4 to make circle (Napa)
6 to make circle (Accent)
6 to make circle
32.5"/46.5"
29.5"/50"
29.5"/50.5"
29"/55"
44.5"/64.5"
42"/66"
46.5"/70.5"
48.5"/77.5"
52"/29"
Get the Best—Get a Kennedy Cap for Your Fire Pit
12
Step UP to the
Quality You
Deserve!
We have made landscape steps up to 10’
long and curved steps (from templates )
for custom orders.
13
Thousands, and Thousands of Our Steps Have Been in Service for over 25 Years
and are still looking GREAT! These Steps are Independent Lab Tested to Take 8-10,000 psi of pressure.
Our steps are made to last a LIFETIME!
Sizes
Landscape Steps
6” x 16” x 36” Rock faced (3 sides)
6” x 16” x 48” Rock faced (3 sides)
6” x 16” x 48” Rock faced (1 Side)
6” x 16” x 60” Rock faced (3 sides)
6” x 16” x 72” Rock faced (3 sides)
Side Risers
6” x 12” x 14” Rock faced (1 side)
6” x 12” x 28” Rock faced (1 side)
6” x 12” x 42” Rock faced (1 side)
Landings (Stoops)
6” x 44” x 48” Rock faced (3 sides)
6” x 44” x 72” Rock faced (3 sides)
14
Before and After
A Half Moon Shaped Step Tread
Before— Native Sandstone
Step treads that Cracked
around the Rail Post Sleeve for
the Bottom Post. Sandstone is
too soft and vulnerable to the
harsh freeze thaw cycle of
Northeast winters.
Before
Kennedy “Custom” Products
that
Solve Special Problems
The small pieces used to
make this hot tub coping
round were just not up to
the harsh winter weather.
Water collected in the gap
between the tub and the
block. When that water
froze the blocks started
popping up.
After— Custom Slate
Top, Rock Faced Step
Treads in Charcoal. This
dense weather resistant
concrete is made to
withstand 8-10,000 psi
and is better suited to the
harsh freeze and thaw
cycle of the Northeast.
After
Cast in just four pieces for ease of installation and a lifetime
of durability, this Custom Kennedy Coping has a majestic
stone feel to its Slate top. It is further complemented by a
bullnose on the inside edge and a rock face on the outside
edge
15
Kennedy “Custom” Concrete
Here at Kennedy, “Custom” might as well be our
middle name! Year after year our customers keep coming
back for the custom touches that make their backyards
LOOK BETTER
THAN ANYONE ELSE’S!
Outdoor Pizza
Oven Countertop
Serpentine Pool
& Deck Coping!
A Custom Slate Top, Rock Faced Outdoor
Kitchen Countertop for that native stone
look and feel, and a Custom Slate Top,
Rock Face Fire Pit Cap are the centerpieces
of this otherwise stock project. Note the
design also includes Kennedy Majestic
Rock Steps (Stock), Peaked Pier Caps
(Stock) ,
Design , Project and Photos
Greenwood Nursery
Exeter, PA
Sloped Serpentine
Wall Cap!
Patio Pavers and
Custom Pool Coping
THINK ... KENNEDY
THINK … CUSTOM
Project and Photos
Silver Maple Landscaping & Nursery
Orwigsburg, PA
YOU DON’T WANT YOUR YARD TO LOOK LIKE ANYONE ELSE’S!
16
14
17
14
18
18
When it Comes to Quality
Kennedy Steps are a Step Above the Rest!
Rock Faced Standard Sizes
2 1/4” x 12” x 39”
2 1/4” x 14” x 39”
2 1/4” x 12” x 51”
2 1/4” x 14” x 51”
2 1/4” x 12” x 63”
2 1/4” x 14” x 63”
2 1/4” x 12” x 75”
2 1/4” x 14” x 75”
Bullnose Sizes
2 1/4” x 12” x 44”
2 1/4” x 14” x 44”
2 1/4” x 12” x 51”
19
When Size Matters
Don’t Settle for Less than Majestic
3 DESIGNS
2 SIZES
Approximately 36” x 60” or 30” x 40”
s
iser
R
c
i
st
Maje
In
3
Sizes
Approx. 29” x 16”
29” x 18” & 44” x 16”
20
Flat Top
w/Rock Faced Sides
12” x 12”
18” x 18”
22” x 22”
24” x 24”
26” x 26”
28” x 28”
30” x 30”
32” x 32”
36” x 36”
Peaked and Light Top
w/Rock Faced Sides
22” x 22”
24” x 24”
26” x 26”
28” x 28”
30” x 30”
32” x 32”
36” x 36”
Plain/Smooth Peaked
11” x 11” (10.75”x10.75”)
15” x 15” (14.5”x14.5”)
20” x 20” (19.5”x19.5”)
25” x 25” (23.5”x23.5”)
26” x 26”
30” x 30”
32” x 32”
When Size Really Does Matter
You Need a Majestic Pier Cap
Majestic Pier Caps
Peaked & Light Top
w/Rock Faced Sides
3 1/2” x 40” x 40”
3 1/2” x 36” x 36”
Flat w/RockFaced Sides
3 x 22 1/2” x 22 1/2”
3” x 26” x 26”
3 1/2” x 36” x 36”
3 1/2” x 40” x 40”
21
12” x 48” Rock Faced (2 Sides)
12” x 51” Rock Faced (3 Sides)
12” x 72” Rock Faced (2 Sides)
14” x 48” Rock Faced (2 Sides)
14” x 51” Rock Faced (3 Sides)
14” x 72” Rock Faced (2 Sides)
18” x 36” Rock Faced (2 Sides)
18” x 48” Rock Faced (2 Sides)
18” x 51” Rock Faced (3 Sides)
14” x 36” Peaked Smooth
Smooth Top
Wall Cap
Sand Top Wall Cap
Slate Top
Wall Cap
The Patterson
Radius Stone Bench
Design Suggestions from
Rich & Susan Melendez
Patterson Hardscape & Supply Company
Mt. Carmel, PA
NEW
for
2016
22
Septic Tank Cover
36” Round Reinforced
Pebble—AC Pad
32” Square
36” Square
Dimple—AC Pad
40” Square
Chimney Cap
For 8” x 8”, 8” x 12”
12” x 12” Flue Liner
Masonry Supplies Like:
Septic Tank Covers
Pebble AC Pads
Dimple AC Pads
Chimney Caps
Are usually in stock and
ready for immediate
pickup!
Post Support
Commercial Park Bench Ends
For 4”x4” or 6”x6” Post or 2”x ?
Rail (Anchor hole in base)
Splash Block
24”, 30”, & 36”
(downspout Drain)
Parking Block
6 Foot Long with Two Holes for Rebar
Keystones
6” x 7 5/8” x 4”
7” x 10 3/4” x 4”
8 3/8” x 10 3/4”
x 4”
Concrete Timbers
5” x 5” x 24”, 36”, 48”,
60”, & 72”
Concrete Fence Posts
& Rails
6 Foot Posts with 2 or 3 Holes
For 8 Foot Rails
Guidelines for Installation
1
2
3
PLANNING - Make a diagram of the area
to be paved. Layout the dimensions on the
diagram. This will help you determine the
quantity of materials required for your job.
Caution: Measurements listed for a product
are often modular measurements. i.e. an
18” paver can actually measure
anywhere from 17” to 18 1/2”.
Check the actual size of the
pavers you will be using.
LAYOUT - Check area to make
sure there are no underground
pipes or cables that your stakes
or digging might hit. Stake out
your area 4” wider than the
planned area.
Use stakes and
run strings to use as straight
edges to lay your pavers along. Note: Make
sure you allow for water drainage away
from buildings. (a slope of 1 inch in 4 feet
to, but not less than, 1 inch in 10 feet)
EXCAVATE - Keep in mind that a paved
area is no better than the base it is laid on.
Spend the necessary time getting the base
just right. This will make laying the pavers
easier and the area will give you years of
satisfactory service.
The depth and composition of the base will
depend on the use of the paved area. For all
uses, remove all vegetation.
 For pedestrian traffic:
If the ground is solid and has good
drainage, depth required will be:
Paving stone thickness + thin layer of
sand .

For heavier traffic:
Depth will be: Paving stone thickness + 1” of
sand + 2” of stone. Sand & stone are to be
compacted.

Auto traffic:
Depth to be: Paving stone thickness + 1” of
sand + 4” to 6” of stones The sand & stone
must be mechanically compacted.
(Compactors can be rented from a local
tool rental store.)
Note: You can increase the strength of
your job, if you make the sand layer a
damp cement mix (1 part cement to 5
parts sand).
LAYING METHODS - There are
three methods of laying paving stone:

Laying on sand. Spread your layer
of sand, level and compact. Then lay your
pavers on this bed, if you need to level
you can put in extra sand.
Laying on a dry mortar mix. Mix a 1 part
cement to 5 parts sand mix (add no water).
Place a thin layer on your compacted bed.
Rake the thin layer leaving small peaks and
troughs. Place the pavers on this bed and
tamp with a rubber mallet or regular
hammer with a board. (Do not strike too
hard so that you don’t break the paver. If
the paver is not level remove or add
material in the base. The tamping is only
to ensure that the mortar mix touches the
entire base of the paver.)


23
Guidelines for Installation
24
Five spot Mortar Bed - This method
involves putting 5 generous spots of mortar
on the compacted sand bed (One in each
corner and one in the middle). The mortar
is 1 part cement to 5 parts mortar sand and
enough water to make the mix “workable”.
The mortar should spread out with light
tamping on the paver. (See note above.)
pavers with diluted ammonia water or
muriatic acid then rinse with plenty of
water.
Apply your sealer following the instruction
on the label.
(Please observe all safety instructions on the
labels.)
JOINTS: Paving is intended to be butt-jointed;
however, if one desires jointed, it is done once
the paving is set.
In climates that do not have a lot of freeze-thaw
cycles per winter season, a dry mix of 1 part
cement to 3 parts dry sand is used to fill joints.
This mix is placed on the dry pavers and swept
into the joints. All of the mix is removed from
the pavers and the area is very lightly sprinkled
with water.
The best method today is to use polymeric sand.
It is expensive but holds up well to the movement caused by freeze-thaw cycles.
WARNING: This information is provided as a
guide and is not intended to be a thorough,
detailed installation guide. There are books
available at libraries, book stores, building supply stores/yards, and online that have complete
guidelines with all the necessary instructions
and safety information.

5
6
CUTTING: The best advice in this area is to
try to lay out the paved area so that there is no
cutting. If pavers must be cut, the best way is
with a circular saw equipped with a diamond
blade, available at most building supply outlets.
Do not try to cut all the way through the paver.
Score each side of paver (depth depends on
paver thickness, but 1/4” to 1/2” is usually
enough). Place the scored paver over a wooden
block and tap with a hammer.
6
SEALING: It is not necessary to seal your
pavers, but sealing does provide protection.
A sealed paver usually looks better, has a better
chance of weathering freeze-thaw cycles and
holding up from acid rain and carbonization,
and dirt is easier to remove. Some sealers make
the paver more slippery or make it less slippery.
(Finish Perfect Concrete Lawn Ornament Sealer,
which can be used on pavers, is one that we use
because it reduces the slipperiness of the pavers).
Always test your sealer on a small area, so that if
something goes wrong it will not have an effect
the appearance of your pavement. (Some sealers
will change the color of the pavers.) Clean the
Always use common sense around your paving
projects. Use all the necessary safety equipment
to protect yourself and those around you.
Watch children around your work area. Falling
pavers, tools, and even your excavation can
cause injury. After finishing your project, we
want you to look back on it with pride and
satisfaction. Please be careful.
25
OUR DEALERS ARE
OUR MOST VALUABLE RESOURCE
(Ashland, PA) While we are very proud of our tradition of innovation and excellence, we recognize that
we couldn’t have made it this far without the help of
a strong network of Landscape and Masonry Supply
Dealers. Our dealers are our most valuable resource. We regularly look to our dealers for input
on new design ideas, new marketing strategies and
new products. These local business owners have a
wealth of knowledge about landscaping, hardscape,
their local marketplace, its needs, desires and wants.
We Are All About
Precast & Wetcast
Concrete Products
If you didn’t find what you are looking for in our
2016 Making Your Dreams CONCRETE catalog
ask your dealer to give us a call. When these folks
talk, it has been our habit to listen. This listening
led to the creation of the Blue Mountain Stone Line,
and more recent introductions like the Patterson Radius Stone Bench shown below.
New
For
2016
The Patterson
Radius Stone Bench
Design Suggestions from
Rich & Susan Melendez
Patterson Hardscape & Supply Company
Mt. Carmel, PA
Looking for a dealer near you. Visit our website
and click on the Find-A-Dealer link. If you type in
your zip code and click enter, this page will provide
you with a map of the dealers that are nearest to
you and their contact information.
Even our mail is wrapped in precast Concrete!
The walls of this mailbox pier were hand troweled
detailed and colorized by hand. Truly a one of
kind, custom work of concrete art. Imagine one
at the end of your driveway and then give your
dealer a call.
26
Don’t see the size SQUARE TOPS
or shape you want
42”X42”
here? Consider a
OR
Custom Counter
48”X48”
or Table Top!
46” ROUND TOPS
ALSO
AVAILABLE!
FOOTRESTS
28”X28”
OR
32”X32”
Compass Table
w/ legs
48” Dia.
42” High
Special Project or Problem?
Put our Custom Design and Precast Team to work on a solution that is just right for you!
With more than 75 Years of knowhow and thousands of custom projects behind us,
we know how to
Make Your Dreams
CONCRETE
They wanted an exciting look for their
new pool and deck! They got with Kennedy custom curved pool coping and
serpentine deck coping!
They wanted and oversized fire pit and needed a
cap that would befit this 6 foot mammoth. They
came to Kennedy for a Custom Cap!
A nice outdoor Grille may be one thing, but how
about a full scale outdoor kitchen with bar and countertop? Let your imagination run wild, and let Kennedy do the custom countertop you want! Rock
faced edges and a Kennedy slate top are sure to give
your kitchen a native stone look!
27
28
Get the Kennedy
PLUSES
A Quality Product
We use only the highest quality raw materials and some of the same chemical additives that are used in
commercial high-rises to give you one of the strongest concretes in the business. The concrete in our current line has been independent laboratory tested to take between 8,000 and 10,000 psi of pressure. And it
has been proven by the of harsh winters and the freeze thaw cycle of the Pennsylvania mountains.
+
Color that is IN the MIX
Our colors are not sprayed on but are in the mix. This means that color runs through the entire product.
Autumn
Brick Red
Camel
Charcoal
Driftwood
Forest Green
Hershey
Iced Mocha
Land Tan
Lilac
Mexican Tan
Milk Chocolate
Mist Grey
Sand
Taupe
Yellow
If you don’t see it here check with your
local dealer for new items that are not
listed in this catalog as we are continually
adding to our line. Also ask about any
“Special Order” or Custom Work items
you may need.
+
ADD some Texture
to the project
Rock Face, a Sand, Light Sand & Slate
Top
+
ADD Some Personality
To Your Next Project
OVER 500 MOLDS
35 Complete Collections
 The Angel Collection
 The Seaside Collection
 The Americana Collection
 The Team Spirit Collection
 The Patriot Collection
 The Armed Forces Collection
 The Cats & Canines Collection
 The Nature Lover’s Collection
 The Horse Lover’s Collection
And Much, Much, More
Your Local Supplier
Wild Horses
KENNEDY CONCRETE, INC.
18” Square — Psq18HorseWild
Manufacturer/Wholesale Distributor
Phone: 570-875-2780 Fax: 570-875-3626
570 Dutchtown Road ● Ashland, PA 17921
Ask for our CONCRETE ART
Catalog
D