Product Specification
Style # AX350
Heavyweight, 7-Gauge, Magid®
CutMaster® Aramax® XT Blended
Seamless Machine Knit Gloves
PRODUCT NOMENCLATURE
®
Style # and Description:
Available Sizes:
Manufacturing Part Numbers:
AX350 – Yellow/green; heavyweight; 7-gauge; Aramax XT Yarn and steel wire blend;
seamless; machine knit; reinforced thumb crotch; ANSI Cut Level 5.
(6)
(7)
(8)
(9)
(10)
(11)
(AX3506)
(AX3507)
(AX3508)
(AX3509)
(AX35010)
(AX35011)
PRODUCT DESCRIPTIO N
Product Classification:
Color:
Pattern Design/Style:
Composition:
Packaging:
Shelf Life:
Special Purpose – Cut Resistant
Yellow/Green
Seamless Machine Knit
®
Aramax XT Blend
12 Dozen Per Case
Three (3) Years In Cool, Covered
Conditions
Category:
Construction:
Cuff Finish:
Color Overedge:
Length:
Heavyweight
7-Gauge
Overedge
(6) Grey; (7) Lt. Blue;
(8) Green; (9) Red;
(10) Black; (11) Orange
(±0.5”) (6) 8” (7) 8.5” (8) 9” (9)
9.5” (10) 10” (11) 10.5”
CHARACTERISTICS & APPLICATION S
®
• Yellow/green, heavyweight, Aramax XT Yarn blended, 7-gauge, seamless machine knit glove with reinforced thumb crotch
delivers the ultimate in protection and durability for even the most demanding metal stamping operations
• Exclusive to Magid, Aramax XT Yarn is spun from a unique, engineered blend of high performance polyethylene (HPPE),
para-aramid, fiberglass and synthetic fibers that deliver chart-topping cut and abrasion resistance, comfort and durability
• Constructed of a performance-driven Aramax XT Yarn and steel wire blend, CutMaster Aramax AX350 Gloves offers up to
two times greater cut protection and up to two-and-a-half times greater abrasion resistance than gloves of a similar weight
made from 100% para-aramid
• Specially engineered to wick away moisture and to allow more air transfer, CutMaster Aramax XT Gloves stay cooler and
breathe easier to provide superior comfort
• Dark yellow/green coloration hides dirt reducing disposal and extending wear
• Washable fabric can be used over and over without compromising performance
• Knit wrist with colored overedge reduces fraying and provides a visual aid in sizing
• ANSI Cut Level 5
APPLICATIONS: Metal stamping, metal fabrication, automotive manufacturing, household appliance assembly, aerospace
manufacturing, paper production, glass fabrication as well as any heavy-duty application where laceration
or abrasion hazards may be present.
Magid Glove & Safety Confidential
Page 1 of 2
FUNCTIONAL PERFORMANCE
♦
♦
ASTM F-1790-97 Cut Resistance
ASTM D3389-05 Abrasion Resistance
(Using H-18 wheel with a 500 gram load)
4174 grams
1639 revolutions
ANSI Cut Level 5
ANSI Level 3
PHYSICAL DEFECTS
DEFINITIONS:
CRITICAL DEFECTS:
MAJOR DEFECTS:
Critical Defects are imperfections which will result in the failure of the glove to perform its
intended purpose. (AQL- 1.0%)
Major Defects are imperfections which may result in the failure of the glove to perform its
intended purpose, cause user discomfort or be cosmetically objectionable. (AQL- 2.5%)
Holes/tears
Dimensional or weight nonconformance, discoloration, other fabric defects
LAUNDERING GUIDELINES
It is recommended that the gloves be machine washed. The water temperature cannot exceed 40°C/104°F. Do not use
bleach. The gloves can be air dried or tumbled dry low temp.
Originator: Lisa Bucki
Revised By: Andres Maldonado
Date: 02/21/12
Date: 08/14/12
NEITHER THIS NOR ANY STATEMENT MADE BY OR ON BEHALF OF
PARTICULAR PURPOSE, AND
MAGID GLOVE & SAFETY
Revision #: 4
HEREIN IS A WARRANTY THAT ANY PRODUCT IS FIT FOR A
MAGID GLOVE & SAFETY SHALL NOT BE LIABLE TO ANY ONE WITH RESPECT TO THIS INFORMATION .
PLEASE NOTE THAT SPECIFICATIONS ARE SUBJECT TO CHANGE.
©Magid Glove & Safety Mfg. Co. LLC.
This document is the property of Magid Glove & Safety and the information contained herein is proprietary to Magid.
Magid®, CutMaster® and Aramax® are registered trademarks of Magid Glove & Safety Mfg. Co. LLC.
All other trademarks are the property of their respective owners.
Magid Glove & Safety Confidential
Page 2 of 2