LABELING
PAPER
Labeling // Paper
NS LABEL 90.60 P PAPER PREMIUM
PRODUCT DESCRIPTION
Premium white glossy coated paper, with a smooth and uniform surface for high quality printing
with water based inks. Tear-resistant, frictional wear and humid environments. Suitable for logistic
applications and food industries, footwear and textiles, furniture and furnishings, energy labels.
FEATURES
PRODUCT
Material:
Glossy Paper
Weight:
125 g/m2
Thickness:
140 mic
Glossiness:
73 %
Tear strength (md):
8.2 KN/m
Tear strength (cd):
3.9 KN/m
Brightness:
108 %
ADHESIVE
Type:
UV Acrylic Hotmelt - Solvent Free, Permanent
Feature:
Pressure Sensitive Adhesive
Peel Adhesion: 7 - 10 N/25 mm
(FINAT FTM1/Stainless/Initial)
LINER
Type:
Glassine
Weight:
65 g/m2
(ISO 536)
Thickness:
56 mic
(ISO 534)
Tear strength (md):
5,5 KN/m
(ISO 1924)
Tear strength (cd):
2,9 KN/m
(ISO 1924)
Transparency:
46 %
(DIN 53147)
STORAGE
Lifespan: For using within one year from the date of manufacturing and provided in sealed
original container.
Conditions: Between 15 °C and 25 °C and RH ~ 50%, out of direct sunlight on a dry and clean
place, in the original packaging. Prolonged storage at a higher humidity and/or temperature levels,
can shorten the lifespan.
1/2
LABELING
PAPER
Labeling // Paper
NS LABEL 90.60 P PAPER PREMIUM
TERMS AND CONDITIONS OF USE
NS does not recommend the use under the following conditions:
Product application on dusty or rough surfaces and / or exposed to vapors or spills.
PRINTING
Important Note: An excessive amount of ink in the product will change its characteristics,
resulting on improper drying and poor performance results.
APPROVALS AND CERTIFICATIONS
The ISEGA research center approved the UV Acrylic Adhesive according to the European
requirements for direct contact with dry, non-greasy foods. In addition, the adhesive coated
labels can be used for the labeling of food packaging materials.
CONSIDERATIONS
Important Note: The data contained in this information is based on our knowledge and practical
experience. It is intended as a source of information and does not constitute a warranty.
Additional information: Given the enormous variety of possible uses, the user shall
New Solution cannot be held responsible for the misuse or improper storage, therefore, is not
responsible for loss or damage to third parties.
Please, check our website for additional information www.newsolution.eu
needed from our technicians.
2/2
LABELING
PAPER
Labeling // Paper
NS LABEL 90.60 P PAPER PREMIUM
PRODUCT DESCRIPTION
Premium white matte coated paper, with a smooth and uniform surface for high quality printing
with water based inks. Tear-resistant, frictional wear and humid environments. Suitable for logistic
applications and food industries, footwear and textiles, furniture and furnishings, energy labels.
FEATURES
PRODUCT
Material:
Matte Paper
Weight:
88 g/m2
(ISO 536)
Thickness:
110 mic
(ISO 534)
Opacity:
91 %
(ISO 2471)
Whiteness CIE:
158 %
(ISO 11475)
ADHESIVE
Type:
UV Acrylic Hotmelt - Solvent Free, Permanent
Feature:
Pressure Sensitive Adhesive
Peel Adhesion: 7 - 10 N/25 mm
(FINAT FTM1/Stainless/Initial)
LINER
Type:
Glassine
Weight:
65 g/m2
(ISO 536)
Thickness:
56 mic
(ISO 534)
Tear strength (md):
5,5 KN/m
(ISO 1924)
Tear strength (cd):
2,9 KN/m
(ISO 1924)
Transparency:
46 %
(DIN 53147)
STORAGE
Lifespan: For using within one year from the date of manufacturing and provided in sealed
original container.
Conditions: Between 15 °C and 25 °C and RH ~ 50%, out of direct sunlight on a dry and clean
place, in the original packaging. Prolonged storage at a higher humidity and/or temperature levels,
can shorten the lifespan.
1/2
LABELING
PAPER
Labeling // Paper
NS LABEL 90.60 P PAPER PREMIUM
TERMS AND CONDITIONS OF USE
NS does not recommend the use under the following conditions:
Product application on dusty or rough surfaces and / or exposed to vapors or spills.
PRINTING
Important Note: An excessive amount of ink in the product will change its characteristics,
resulting on improper drying and poor performance results.
APPROVALS AND CERTIFICATIONS
The ISEGA research center approved the UV Acrylic Adhesive according to the European
requirements for direct contact with dry, non-greasy foods. In addition, the adhesive coated
labels can be used for the labeling of food packaging materials.
CONSIDERATIONS
Important Note: The data contained in this information is based on our knowledge and practical
experience. It is intended as a source of information and does not constitute a warranty.
Additional information: Given the enormous variety of possible uses, the user shall
New Solution cannot be held responsible for the misuse or improper storage, therefore, is not
responsible for loss or damage to third parties.
Please, check our website for additional information www.newsolution.eu
needed from our technicians.
2/2